DPDK patches and discussions
 help / color / mirror / Atom feed
From: Eric Kinzie <ehkinzie@gmail.com>
To: dev@dpdk.org
Cc: Eric Kinzie <ekinzie@brocade.com>
Subject: [dpdk-dev] [PATCH v2 4/6] bond mode 4: allow external state machine
Date: Fri, 19 Feb 2016 11:17:51 -0800	[thread overview]
Message-ID: <1455909473-13539-5-git-send-email-ehkinzie@gmail.com> (raw)
In-Reply-To: <1455909473-13539-1-git-send-email-ehkinzie@gmail.com>

From: Eric Kinzie <ekinzie@brocade.com>

Provide functions to allow an external 802.3ad state machine to transmit
and recieve LACPDUs and to set the collection/distribution flags on
slave interfaces.

Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
---
 drivers/net/bonding/rte_eth_bond_8023ad.c         |  173 +++++++++++++++++++++
 drivers/net/bonding/rte_eth_bond_8023ad.h         |   44 ++++++
 drivers/net/bonding/rte_eth_bond_8023ad_private.h |    2 +
 drivers/net/bonding/rte_eth_bond_version.map      |    6 +
 4 files changed, 225 insertions(+)

diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.c b/drivers/net/bonding/rte_eth_bond_8023ad.c
index 1b7e93a..a260e06 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.c
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.c
@@ -42,6 +42,8 @@
 
 #include "rte_eth_bond_private.h"
 
+static void bond_mode_8023ad_ext_periodic_cb(void *arg);
+
 #ifdef RTE_LIBRTE_BOND_DEBUG_8023AD
 #define MODE4_DEBUG(fmt, ...) RTE_LOG(DEBUG, PMD, "%6u [Port %u: %s] " fmt, \
 			bond_dbg_get_time_diff_ms(), slave_id, \
@@ -1020,6 +1022,7 @@ bond_mode_8023ad_conf_get(struct rte_eth_dev *dev,
 	conf->tx_period_ms = mode4->tx_period_timeout / ms_ticks;
 	conf->update_timeout_ms = mode4->update_timeout_us / 1000;
 	conf->rx_marker_period_ms = mode4->rx_marker_timeout / ms_ticks;
+	conf->slowrx_cb = mode4->slowrx_cb;
 }
 
 void
@@ -1041,8 +1044,11 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 		conf->tx_period_ms = BOND_8023AD_TX_MACHINE_PERIOD_MS;
 		conf->rx_marker_period_ms = BOND_8023AD_RX_MARKER_PERIOD_MS;
 		conf->update_timeout_ms = BOND_MODE_8023AX_UPDATE_TIMEOUT_MS;
+		conf->slowrx_cb = NULL;
 	}
 
+	bond_mode_8023ad_stop(dev);
+
 	mode4->fast_periodic_timeout = conf->fast_periodic_ms * ms_ticks;
 	mode4->slow_periodic_timeout = conf->slow_periodic_ms * ms_ticks;
 	mode4->short_timeout = conf->short_timeout_ms * ms_ticks;
@@ -1051,6 +1057,10 @@ bond_mode_8023ad_setup(struct rte_eth_dev *dev,
 	mode4->tx_period_timeout = conf->tx_period_ms * ms_ticks;
 	mode4->rx_marker_timeout = conf->rx_marker_period_ms * ms_ticks;
 	mode4->update_timeout_us = conf->update_timeout_ms * 1000;
+	mode4->slowrx_cb = conf->slowrx_cb;
+
+	if (dev->data->dev_started)
+		bond_mode_8023ad_start(dev);
 }
 
 int
@@ -1068,6 +1078,13 @@ bond_mode_8023ad_enable(struct rte_eth_dev *bond_dev)
 int
 bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 {
+	struct bond_dev_private *internals = bond_dev->data->dev_private;
+	struct mode8023ad_private *mode4 = &internals->mode4;
+
+	if (mode4->slowrx_cb)
+		return rte_eal_alarm_set(BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000,
+			&bond_mode_8023ad_ext_periodic_cb, bond_dev);
+
 	return rte_eal_alarm_set(BOND_MODE_8023AX_UPDATE_TIMEOUT_MS * 1000,
 			&bond_mode_8023ad_periodic_cb, bond_dev);
 }
@@ -1075,6 +1092,13 @@ bond_mode_8023ad_start(struct rte_eth_dev *bond_dev)
 void
 bond_mode_8023ad_stop(struct rte_eth_dev *bond_dev)
 {
+	struct bond_dev_private *internals = bond_dev->data->dev_private;
+	struct mode8023ad_private *mode4 = &internals->mode4;
+
+	if (mode4->slowrx_cb) {
+		rte_eal_alarm_cancel(&bond_mode_8023ad_ext_periodic_cb, bond_dev);
+		return;
+	}
 	rte_eal_alarm_cancel(&bond_mode_8023ad_periodic_cb, bond_dev);
 }
 
@@ -1221,3 +1245,152 @@ rte_eth_bond_8023ad_slave_info(uint8_t port_id, uint8_t slave_id,
 	info->agg_port_id = port->aggregator_port_id;
 	return 0;
 }
+
+int
+rte_eth_bond_8023ad_ext_collect(uint8_t port_id, uint8_t slave_id, int enabled)
+{
+	struct rte_eth_dev *bond_dev;
+	struct bond_dev_private *internals;
+	struct mode8023ad_private *mode4;
+	struct port *port;
+
+	if (rte_eth_bond_mode_get(port_id) != BONDING_MODE_8023AD)
+		return -EINVAL;
+
+	bond_dev = &rte_eth_devices[port_id];
+
+	if (!bond_dev->data->dev_started)
+		return -EINVAL;
+
+	internals = bond_dev->data->dev_private;
+	if (find_slave_by_id(internals->active_slaves,
+			internals->active_slave_count, slave_id) ==
+				internals->active_slave_count)
+		return -EINVAL;
+
+	mode4 = &internals->mode4;
+	if (mode4->slowrx_cb == NULL)
+		return -EINVAL;
+
+	port = &mode_8023ad_ports[slave_id];
+
+	if (enabled)
+		ACTOR_STATE_SET(port, COLLECTING);
+	else
+		ACTOR_STATE_CLR(port, COLLECTING);
+
+	return 0;
+}
+
+int
+rte_eth_bond_8023ad_ext_distrib(uint8_t port_id, uint8_t slave_id, int enabled)
+{
+	struct rte_eth_dev *bond_dev;
+	struct bond_dev_private *internals;
+	struct mode8023ad_private *mode4;
+	struct port *port;
+
+	if (rte_eth_bond_mode_get(port_id) != BONDING_MODE_8023AD)
+		return -EINVAL;
+
+	bond_dev = &rte_eth_devices[port_id];
+
+	if (!bond_dev->data->dev_started)
+		return -EINVAL;
+
+	internals = bond_dev->data->dev_private;
+	if (find_slave_by_id(internals->active_slaves,
+			internals->active_slave_count, slave_id) ==
+				internals->active_slave_count)
+		return -EINVAL;
+
+	mode4 = &internals->mode4;
+	if (mode4->slowrx_cb == NULL)
+		return -EINVAL;
+
+	port = &mode_8023ad_ports[slave_id];
+
+	if (enabled)
+		ACTOR_STATE_SET(port, DISTRIBUTING);
+	else
+		ACTOR_STATE_CLR(port, DISTRIBUTING);
+
+	return 0;
+}
+
+int
+rte_eth_bond_8023ad_ext_slowtx(uint8_t port_id, uint8_t slave_id,
+		struct rte_mbuf *lacp_pkt)
+{
+	struct rte_eth_dev *bond_dev;
+	struct bond_dev_private *internals;
+	struct mode8023ad_private *mode4;
+	struct port *port;
+
+	if (rte_eth_bond_mode_get(port_id) != BONDING_MODE_8023AD)
+		return -EINVAL;
+
+	bond_dev = &rte_eth_devices[port_id];
+
+	if (!bond_dev->data->dev_started)
+		return -EINVAL;
+
+	internals = bond_dev->data->dev_private;
+	if (find_slave_by_id(internals->active_slaves,
+			internals->active_slave_count, slave_id) ==
+				internals->active_slave_count)
+		return -EINVAL;
+
+	mode4 = &internals->mode4;
+	if (mode4->slowrx_cb == NULL)
+		return -EINVAL;
+
+	port = &mode_8023ad_ports[slave_id];
+
+	if (rte_pktmbuf_pkt_len(lacp_pkt) < sizeof(struct lacpdu_header))
+		return -EINVAL;
+
+	struct lacpdu_header *lacp;
+
+	/* only enqueue LACPDUs */
+	lacp = rte_pktmbuf_mtod(lacp_pkt, struct lacpdu_header *);
+	if (lacp->lacpdu.subtype != SLOW_SUBTYPE_LACP)
+		return -EINVAL;
+
+	MODE4_DEBUG("sending LACP frame\n");
+
+	return rte_ring_enqueue(port->tx_ring, lacp_pkt);
+}
+
+static void
+bond_mode_8023ad_ext_periodic_cb(void *arg)
+{
+	struct rte_eth_dev *bond_dev = arg;
+	struct bond_dev_private *internals = bond_dev->data->dev_private;
+	struct mode8023ad_private *mode4 = &internals->mode4;
+	struct port *port;
+	void *pkt = NULL;
+	uint16_t i, slave_id;
+
+	for (i = 0; i < internals->active_slave_count; i++) {
+		slave_id = internals->active_slaves[i];
+		port = &mode_8023ad_ports[slave_id];
+
+		if (rte_ring_dequeue(port->rx_ring, &pkt) == 0) {
+			struct rte_mbuf *lacp_pkt = pkt;
+			struct lacpdu_header *lacp;
+
+			lacp = rte_pktmbuf_mtod(lacp_pkt,
+						struct lacpdu_header *);
+			RTE_VERIFY(lacp->lacpdu.subtype == SLOW_SUBTYPE_LACP);
+
+			/* This is LACP frame so pass it to rx callback.
+			 * Callback is responsible for freeing mbuf.
+			 */
+			mode4->slowrx_cb(slave_id, lacp_pkt);
+		}
+	}
+
+	rte_eal_alarm_set(internals->mode4.update_timeout_us,
+			bond_mode_8023ad_ext_periodic_cb, arg);
+}
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.h b/drivers/net/bonding/rte_eth_bond_8023ad.h
index ebd0e93..8cfa3d3 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad.h
@@ -64,6 +64,8 @@ extern "C" {
 #define MARKER_TLV_TYPE_INFO                0x01
 #define MARKER_TLV_TYPE_RESP                0x02
 
+typedef void (*rte_eth_bond_8023ad_ext_slowrx_fn)(uint8_t slave_id, struct rte_mbuf *lacp_pkt);
+
 enum rte_bond_8023ad_selection {
 	UNSELECTED,
 	STANDBY,
@@ -157,6 +159,7 @@ struct rte_eth_bond_8023ad_conf {
 	uint32_t tx_period_ms;
 	uint32_t rx_marker_period_ms;
 	uint32_t update_timeout_ms;
+	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
 };
 
 struct rte_eth_bond_8023ad_slave_info {
@@ -219,4 +222,45 @@ rte_eth_bond_8023ad_slave_info(uint8_t port_id, uint8_t slave_id,
 }
 #endif
 
+/**
+ * Configure a slave port to start collecting.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port id of valid slave.
+ * @param enabled	Non-zero when collection enabled.
+ * @return
+ *   0 - if ok
+ *   -EINVAL if slave is not valid.
+ */
+int
+rte_eth_bond_8023ad_ext_collect(uint8_t port_id, uint8_t slave_id, int enabled);
+
+/**
+ * Configure a slave port to start distributing.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port id of valid slave.
+ * @param enabled	Non-zero when distribution enabled.
+ * @return
+ *   0 - if ok
+ *   -EINVAL if slave is not valid.
+ */
+int
+rte_eth_bond_8023ad_ext_distrib(uint8_t port_id, uint8_t slave_id, int enabled);
+
+/**
+ * LACPDU transmit path for external 802.3ad state machine.  Caller retains
+ * ownership of the packet on failure.
+ *
+ * @param port_id	Bonding device id
+ * @param slave_id	Port ID of valid slave device.
+ * @param lacp_pkt	mbuf containing LACPDU.
+ *
+ * @return
+ *   0 on success, negative value otherwise.
+ */
+int
+rte_eth_bond_8023ad_ext_slowtx(uint8_t port_id, uint8_t slave_id,
+		struct rte_mbuf *lacp_pkt);
+
 #endif /* RTE_ETH_BOND_8023AD_H_ */
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad_private.h b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
index 8adee70..9e15ece 100644
--- a/drivers/net/bonding/rte_eth_bond_8023ad_private.h
+++ b/drivers/net/bonding/rte_eth_bond_8023ad_private.h
@@ -173,6 +173,8 @@ struct mode8023ad_private {
 	uint64_t tx_period_timeout;
 	uint64_t rx_marker_timeout;
 	uint64_t update_timeout_us;
+	rte_eth_bond_8023ad_ext_slowrx_fn slowrx_cb;
+	uint8_t external_sm;
 };
 
 /**
diff --git a/drivers/net/bonding/rte_eth_bond_version.map b/drivers/net/bonding/rte_eth_bond_version.map
index 22bd920..33d73ff 100644
--- a/drivers/net/bonding/rte_eth_bond_version.map
+++ b/drivers/net/bonding/rte_eth_bond_version.map
@@ -27,3 +27,9 @@ DPDK_2.1 {
 	rte_eth_bond_free;
 
 } DPDK_2.0;
+
+DPDK_2.2 {
+	rte_eth_bond_8023ad_ext_collect;
+	rte_eth_bond_8023ad_ext_distrib;
+	rte_eth_bond_8023ad_ext_slowtx;
+} DPDK_2.1;
-- 
1.7.10.4

  parent reply	other threads:[~2016-02-20  4:57 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-04 17:14 [dpdk-dev] [PATCH 0/8] bonding: fixes and enhancements Stephen Hemminger
2015-12-04 17:14 ` [dpdk-dev] [PATCH 1/8] bond: use existing enslaved device queues Stephen Hemminger
2016-01-05 13:32   ` Declan Doherty
2015-12-04 17:14 ` [dpdk-dev] [PATCH 2/8] bond mode 4: copy entire config structure Stephen Hemminger
2016-01-05 13:32   ` Declan Doherty
2015-12-04 17:14 ` [dpdk-dev] [PATCH 3/8] bond mode 4: do not ignore multicast Stephen Hemminger
2016-01-05 13:32   ` Declan Doherty
2015-12-04 17:14 ` [dpdk-dev] [PATCH 4/8] bond mode 4: allow external state machine Stephen Hemminger
2016-01-05 13:33   ` Declan Doherty
2015-12-04 17:14 ` [dpdk-dev] [PATCH 5/8] bond: active slaves with no primary Stephen Hemminger
2016-01-05 13:34   ` Declan Doherty
2015-12-04 17:14 ` [dpdk-dev] [PATCH 6/8] bond: handle slaves with fewer queues than bonding device Stephen Hemminger
2015-12-04 18:36   ` Andriy Berestovskyy
2015-12-04 19:18     ` Eric Kinzie
2016-01-05 13:46       ` Declan Doherty
2016-01-05 15:31         ` Stephen Hemminger
2016-02-03 11:28       ` Bruce Richardson
2016-02-03 15:17         ` Declan Doherty
2016-02-03 15:21           ` Thomas Monjalon
2016-02-18 10:26             ` Iremonger, Bernard
2016-02-19 19:17               ` [dpdk-dev] [PATCH v2 0/6] bonding: fixes and enhancements Eric Kinzie
2016-02-19 19:17                 ` [dpdk-dev] [PATCH v2 1/6] bond: use existing enslaved device queues Eric Kinzie
2016-02-19 19:17                 ` [dpdk-dev] [PATCH v2 2/6] bond mode 4: copy entire config structure Eric Kinzie
2016-02-19 19:17                 ` [dpdk-dev] [PATCH v2 3/6] bond mode 4: do not ignore multicast Eric Kinzie
2016-02-19 19:17                 ` Eric Kinzie [this message]
2016-02-22 13:03                   ` [dpdk-dev] [PATCH v2 4/6] bond mode 4: allow external state machine Panu Matilainen
2016-02-25 15:22                     ` Iremonger, Bernard
2016-03-01 17:31                       ` [dpdk-dev] [PATCH V3 0/4] bonding: fixes and enhancements Eric Kinzie
2016-03-01 17:31                         ` [dpdk-dev] [PATCH V3 1/4] bond mode 4: copy entire config structure Eric Kinzie
2016-03-01 17:32                         ` [dpdk-dev] [PATCH V3 2/4] bond mode 4: do not ignore multicast Eric Kinzie
2016-03-01 17:32                         ` [dpdk-dev] [PATCH V3 3/4] bond: active slaves with no primary Eric Kinzie
2016-03-01 17:32                         ` [dpdk-dev] [PATCH V3 4/4] bond: do not activate slave twice Eric Kinzie
2016-03-10 15:41                         ` [dpdk-dev] [PATCH V3 0/4] bonding: fixes and enhancements Bruce Richardson
2016-03-01 17:40                       ` [dpdk-dev] [PATCH v2 4/6] bond mode 4: allow external state machine Eric Kinzie
2016-03-02  9:49                         ` Iremonger, Bernard
2016-02-19 19:17                 ` [dpdk-dev] [PATCH v2 5/6] bond: active slaves with no primary Eric Kinzie
2016-02-19 19:17                 ` [dpdk-dev] [PATCH v2 6/6] bond: do not activate slave twice Eric Kinzie
2015-12-04 17:14 ` [dpdk-dev] [PATCH 7/8] bond: per-slave intermediate rx ring Stephen Hemminger
2015-12-04 17:14 ` [dpdk-dev] [PATCH 8/8] bond: do not activate slave twice Stephen Hemminger
2016-01-05 13:47   ` Declan Doherty
2015-12-23 10:51 ` [dpdk-dev] [PATCH 0/8] bonding: fixes and enhancements Iremonger, Bernard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455909473-13539-5-git-send-email-ehkinzie@gmail.com \
    --to=ehkinzie@gmail.com \
    --cc=dev@dpdk.org \
    --cc=ekinzie@brocade.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).