[dpdk-dev] [PATCH] Updating QAT documentation

[dpdk-dev] [PATCH] Updating QAT documentation

[Fiona Trahe]

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
 doc/guides/cryptodevs/qat.rst | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst
index 23402b4..1b4be0c 100644
--- a/doc/guides/cryptodevs/qat.rst
+++ b/doc/guides/cryptodevs/qat.rst
@@ -1,5 +1,5 @@
 ..  BSD LICENSE
-    Copyright(c) 2015 Intel Corporation. All rights reserved.
+    Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
 
     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions
@@ -33,9 +33,6 @@ Quick Assist Crypto Poll Mode Driver
 The QAT PMD provides poll mode crypto driver support for **Intel QuickAssist
 Technology DH895xxC** hardware accelerator.
 
-The QAT PMD has been tested on Fedora 21 64-bit with gcc and on the 4.4
-kernel.org Linux kernel.
-
 
 Features
 --------
@@ -65,7 +62,7 @@ Limitations
 * Only in-place is currently supported (destination address is the same as source address).
 * Only supports the session-oriented API implementation (session-less APIs are not supported).
 * Not performance tuned.
-
+* No BSD support as BSD QAT kernel driver not available.
 
 Installation
 ------------
@@ -197,6 +194,25 @@ the bdf of the 32 VF devices are available per ``DH895xCC`` device.
 
 To complete the installation - follow instructions in `Binding the available VFs to the DPDK UIO driver`_.
 
+**Note**: If the QAT kernel modules are not loaded and you see an error like
+    ``Failed to load MMP firmware qat_895xcc_mmp.bin`` this may be as a
+result of not using a distribution, but just updating the kernel directly.
+
+Download firmware from the kernel firmware repo at:
+http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/
+
+Copy qat binaries to /lib/firmware:
+*    ``cp qat_895xcc.bin /lib/firmware``
+*    ``cp qat_895xcc_mmp.bin /lib/firmware``
+
+cd to your linux source root directory and start the qat kernel modules:
+*    ``insmod ./drivers/crypto/qat/qat_common/intel_qat.ko``
+*    ``insmod ./drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko``
+
+**Note**:The following warning in /var/log/messages can be ignored:
+    ``IOMMU should be enabled for SR-IOV to work correctly``
+
+
 
 Binding the available VFs to the DPDK UIO driver
 ------------------------------------------------
-- 
2.1.0

Re: [dpdk-dev] [PATCH] Updating QAT documentation

[Thomas Monjalon]

2016-02-25 17:23, Fiona Trahe:
> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>

Applied with an indent fix, thanks.