From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga09.intel.com (mga09.intel.com [134.134.136.24]) by dpdk.org (Postfix) with ESMTP id B91902BD8 for ; Fri, 4 Mar 2016 16:38:58 +0100 (CET) Received: from fmsmga004.fm.intel.com ([10.253.24.48]) by orsmga102.jf.intel.com with ESMTP; 04 Mar 2016 07:38:43 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.22,536,1449561600"; d="scan'208";a="59883232" Received: from dpdk06.sh.intel.com ([10.239.128.225]) by fmsmga004.fm.intel.com with ESMTP; 04 Mar 2016 07:38:41 -0800 From: Jianfeng Tan To: dev@dpdk.org Date: Fri, 4 Mar 2016 16:38:07 +0800 Message-Id: <1457080687-114113-1-git-send-email-jianfeng.tan@intel.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1456795416-118189-1-git-send-email-jianfeng.tan@intel.com> References: <1456795416-118189-1-git-send-email-jianfeng.tan@intel.com> Subject: [dpdk-dev] [PATCH v2] examples/l3fwd: fix using packet type blindly X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 04 Mar 2016 15:38:59 -0000 This patch will work on below patch series. - [PATCH v6 00/11] Add API to get packet type info As a example to use ptype info, l3fwd needs firstly to use rte_eth_dev_get_ptype_info() API to check if device and/or its PMD driver will parse and fill the needed packet type; if not, use the newly added option, --parse-ptype, to analyze it in the callback softly. As the mode of EXACT_MATCH uses the 5 tuples to caculate hash, so we narrow down its scope to: a. ip packets with no extensions, and b. L4 payload should be either tcp or udp. Note: this patch does not completely solve the issue, "cannot run l3fwd on virtio or other devices", because hw_ip_checksum may be not supported by the devices. Currently we can: a. remove this requirements; b. wait for virtio front end (pmd) to support it. Signed-off-by: Jianfeng Tan --- v2: - Add patchset dependence in commit log. - Change hardcoded 0 to RTE_PTYPE_UNKNOWN. - More accurate em_parse_type. - Add restrictions in EM forwarding functions. - Define cb directly to avoid too many function calls when do analyze. - Some typo fixed. - Change the position to call rte_eth_dev_get_ptype_info after rte_eth_dev_start(). doc/guides/rel_notes/release_16_04.rst | 5 ++ doc/guides/sample_app_ug/l3_forward.rst | 6 +- examples/l3fwd/l3fwd.h | 14 ++++ examples/l3fwd/l3fwd_em.c | 115 ++++++++++++++++++++++++++++++++ examples/l3fwd/l3fwd_em.h | 10 ++- examples/l3fwd/l3fwd_em_hlm_sse.h | 17 +++-- examples/l3fwd/l3fwd_em_sse.h | 9 ++- examples/l3fwd/l3fwd_lpm.c | 71 ++++++++++++++++++++ examples/l3fwd/main.c | 52 +++++++++++++++ 9 files changed, 289 insertions(+), 10 deletions(-) diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst index 64e913d..4d6260e 100644 --- a/doc/guides/rel_notes/release_16_04.rst +++ b/doc/guides/rel_notes/release_16_04.rst @@ -68,6 +68,11 @@ This section should contain bug fixes added to the relevant sections. Sample for vhost-switch often fails to allocate mbuf when dequeue from vring because it wrongly calculates the number of mbufs needed. +* **examples/l3fwd: Fixed using packet type blindly.** + + l3fwd makes use of packet type information without even query if devices or PMDs + really set it. For those don't set ptypes, add an option to parse it softly. + EAL ~~~ diff --git a/doc/guides/sample_app_ug/l3_forward.rst b/doc/guides/sample_app_ug/l3_forward.rst index 4ce734b..46a1782 100644 --- a/doc/guides/sample_app_ug/l3_forward.rst +++ b/doc/guides/sample_app_ug/l3_forward.rst @@ -93,7 +93,7 @@ The application has a number of command line options: .. code-block:: console - ./build/l3fwd [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa][--hash-entry-num][--ipv6] + ./build/l3fwd [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa][--hash-entry-num][--ipv6] [--parse-ptype] where, @@ -114,6 +114,8 @@ where, * --ipv6: optional, set it if running ipv6 packets +* --parse-ptype: optional, set it if use software way to analyze packet type + For example, consider a dual processor socket platform where cores 0-7 and 16-23 appear on socket 0, while cores 8-15 and 24-31 appear on socket 1. Let's say that the programmer wants to use memory from both NUMA nodes, the platform has only two ports, one connected to each NUMA node, and the programmer wants to use two cores from each processor socket to do the packet processing. @@ -334,6 +336,8 @@ The key code snippet of simple_ipv4_fwd_4pkts() is shown below: The simple_ipv6_fwd_4pkts() function is similar to the simple_ipv4_fwd_4pkts() function. +Known issue: IP packets with extensions or IP packets which are not TCP/UDP cannot work well at this mode. + Packet Forwarding for LPM-based Lookups ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/examples/l3fwd/l3fwd.h b/examples/l3fwd/l3fwd.h index da6d369..6ae2454 100644 --- a/examples/l3fwd/l3fwd.h +++ b/examples/l3fwd/l3fwd.h @@ -198,6 +198,20 @@ void setup_hash(const int socketid); int +em_check_ptype(int portid); + +int +lpm_check_ptype(int portid); + +uint16_t +em_cb_parse_ptype(uint8_t port, uint16_t queue, struct rte_mbuf *pkts[], + uint16_t nb_pkts, uint16_t max_pkts, void *user_param); + +uint16_t +lpm_cb_parse_ptype(uint8_t port, uint16_t queue, struct rte_mbuf *pkts[], + uint16_t nb_pkts, uint16_t max_pkts, void *user_param); + +int em_main_loop(__attribute__((unused)) void *dummy); int diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c index f6a65d8..a2d51f0 100644 --- a/examples/l3fwd/l3fwd_em.c +++ b/examples/l3fwd/l3fwd_em.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -508,6 +509,120 @@ populate_ipv6_many_flow_into_table(const struct rte_hash *h, printf("Hash: Adding 0x%x keys\n", nr_flow); } +/* Requirements: + * 1. IP packets without extension; + * 2. L4 payload should be either TCP or UDP. + */ +int +em_check_ptype(int portid) +{ + int i, ret; + int ptype_l3_ipv4_ext = 0; + int ptype_l3_ipv6_ext = 0; + int ptype_l4_tcp = 0; + int ptype_l4_udp = 0; + + ret = rte_eth_dev_get_ptype_info(portid, + RTE_PTYPE_L3_MASK | RTE_PTYPE_L4_MASK, + NULL, 0); + if (ret <= 0) + return 0; + + uint32_t ptypes[ret]; + + ret = rte_eth_dev_get_ptype_info(portid, + RTE_PTYPE_L3_MASK | RTE_PTYPE_L4_MASK, + ptypes, ret); + for (i = 0; i < ret; ++i) { + switch (ptypes[i]) { + case RTE_PTYPE_L3_IPV4_EXT: + ptype_l3_ipv4_ext = 1; + break; + case RTE_PTYPE_L3_IPV6_EXT: + ptype_l3_ipv6_ext = 1; + break; + case RTE_PTYPE_L4_TCP: + ptype_l4_tcp = 1; + break; + case RTE_PTYPE_L4_UDP: + ptype_l4_udp = 1; + break; + } + } + + if (ptype_l3_ipv4_ext == 0) + printf("port %d cannot parse RTE_PTYPE_L3_IPV4_EXT\n", portid); + if (ptype_l3_ipv6_ext == 0) + printf("port %d cannot parse RTE_PTYPE_L3_IPV6_EXT\n", portid); + if (!ptype_l3_ipv4_ext || !ptype_l3_ipv6_ext) + return 0; + + if (ptype_l4_tcp == 0) + printf("port %d cannot parse RTE_PTYPE_L4_TCP\n", portid); + if (ptype_l4_udp == 0) + printf("port %d cannot parse RTE_PTYPE_L4_UDP\n", portid); + if (ptype_l4_tcp || ptype_l4_udp) + return 1; + + return 0; +} + +static inline void +em_parse_ptype(struct rte_mbuf *m) +{ + struct ether_hdr *eth_hdr; + uint32_t packet_type = RTE_PTYPE_UNKNOWN; + uint16_t ethertype; + void *l3; + int hdr_len; + struct ipv4_hdr *ipv4_hdr; + struct ipv6_hdr *ipv6_hdr; + + eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); + ethertype = rte_be_to_cpu_16(eth_hdr->ether_type); + l3 = (uint8_t *)eth_hdr + sizeof(struct ether_hdr); + switch (ethertype) { + case ETHER_TYPE_IPv4: + ipv4_hdr = (struct ipv4_hdr *)l3; + hdr_len = (ipv4_hdr->version_ihl & IPV4_HDR_IHL_MASK) * + IPV4_IHL_MULTIPLIER; + if (hdr_len == sizeof(struct ipv4_hdr)) { + packet_type |= RTE_PTYPE_L3_IPV4; + if (ipv4_hdr->next_proto_id == IPPROTO_TCP) + packet_type |= RTE_PTYPE_L4_TCP; + else if (ipv4_hdr->next_proto_id == IPPROTO_UDP) + packet_type |= RTE_PTYPE_L4_UDP; + } else + packet_type |= RTE_PTYPE_L3_IPV4_EXT; + break; + case ETHER_TYPE_IPv6: + ipv6_hdr = (struct ipv6_hdr *)l3; + if (ipv6_hdr->proto == IPPROTO_TCP) + packet_type |= RTE_PTYPE_L3_IPV6 | RTE_PTYPE_L4_TCP; + else if (ipv6_hdr->proto == IPPROTO_UDP) + packet_type |= RTE_PTYPE_L3_IPV6 | RTE_PTYPE_L4_UDP; + else + packet_type |= RTE_PTYPE_L3_IPV6_EXT_UNKNOWN; + break; + } + + m->packet_type = packet_type; +} + +uint16_t +em_cb_parse_ptype(uint8_t port __rte_unused, uint16_t queue __rte_unused, + struct rte_mbuf *pkts[], uint16_t nb_pkts, + uint16_t max_pkts __rte_unused, + void *user_param __rte_unused) +{ + unsigned i; + + for (i = 0; i < nb_pkts; ++i) + em_parse_ptype(pkts[i]); + + return nb_pkts; +} + /* main processing loop */ int em_main_loop(__attribute__((unused)) void *dummy) diff --git a/examples/l3fwd/l3fwd_em.h b/examples/l3fwd/l3fwd_em.h index 64ea7f7..2284bbd 100644 --- a/examples/l3fwd/l3fwd_em.h +++ b/examples/l3fwd/l3fwd_em.h @@ -41,10 +41,14 @@ l3fwd_em_simple_forward(struct rte_mbuf *m, uint8_t portid, struct ether_hdr *eth_hdr; struct ipv4_hdr *ipv4_hdr; uint8_t dst_port; + uint32_t tcp_or_udp; + uint32_t l3_ptypes; eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); + tcp_or_udp = m->packet_type & (RTE_PTYPE_L4_TCP | RTE_PTYPE_L4_UDP); + l3_ptypes = m->packet_type & RTE_PTYPE_L3_MASK; - if (RTE_ETH_IS_IPV4_HDR(m->packet_type)) { + if (tcp_or_udp && (l3_ptypes == RTE_PTYPE_L3_IPV4)) { /* Handle IPv4 headers.*/ ipv4_hdr = rte_pktmbuf_mtod_offset(m, struct ipv4_hdr *, sizeof(struct ether_hdr)); @@ -56,7 +60,7 @@ l3fwd_em_simple_forward(struct rte_mbuf *m, uint8_t portid, return; } #endif - dst_port = em_get_ipv4_dst_port(ipv4_hdr, portid, + dst_port = em_get_ipv4_dst_port(ipv4_hdr, portid, qconf->ipv4_lookup_struct); if (dst_port >= RTE_MAX_ETHPORTS || @@ -75,7 +79,7 @@ l3fwd_em_simple_forward(struct rte_mbuf *m, uint8_t portid, ether_addr_copy(&ports_eth_addr[dst_port], ð_hdr->s_addr); send_single_packet(qconf, m, dst_port); - } else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) { + } else if (tcp_or_udp && (l3_ptypes == RTE_PTYPE_L3_IPV6)) { /* Handle IPv6 headers.*/ struct ipv6_hdr *ipv6_hdr; diff --git a/examples/l3fwd/l3fwd_em_hlm_sse.h b/examples/l3fwd/l3fwd_em_hlm_sse.h index d3388da..90821e6 100644 --- a/examples/l3fwd/l3fwd_em_hlm_sse.h +++ b/examples/l3fwd/l3fwd_em_hlm_sse.h @@ -247,8 +247,13 @@ em_get_dst_port(const struct lcore_conf *qconf, struct rte_mbuf *pkt, uint8_t next_hop; struct ipv4_hdr *ipv4_hdr; struct ipv6_hdr *ipv6_hdr; + uint32_t tcp_or_udp; + uint32_t l3_ptypes; - if (RTE_ETH_IS_IPV4_HDR(pkt->packet_type)) { + tcp_or_udp = pkt->packet_type & (RTE_PTYPE_L4_TCP | RTE_PTYPE_L4_UDP); + l3_ptypes = pkt->packet_type & RTE_PTYPE_L3_MASK; + + if (tcp_or_udp && (l3_ptypes == RTE_PTYPE_L3_IPV4)) { /* Handle IPv4 headers.*/ ipv4_hdr = rte_pktmbuf_mtod_offset(pkt, struct ipv4_hdr *, @@ -263,7 +268,7 @@ em_get_dst_port(const struct lcore_conf *qconf, struct rte_mbuf *pkt, return next_hop; - } else if (RTE_ETH_IS_IPV6_HDR(pkt->packet_type)) { + } else if (tcp_or_udp && (l3_ptypes == RTE_PTYPE_L3_IPV6)) { /* Handle IPv6 headers.*/ ipv6_hdr = rte_pktmbuf_mtod_offset(pkt, struct ipv6_hdr *, @@ -312,11 +317,15 @@ l3fwd_em_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, pkts_burst[j+6]->packet_type & pkts_burst[j+7]->packet_type; - if (pkt_type & RTE_PTYPE_L3_IPV4) { + uint32_t l3_type = pkt_type & RTE_PTYPE_L3_MASK; + uint32_t tcp_or_udp = pkt_type & + (RTE_PTYPE_L4_TCP | RTE_PTYPE_L4_UDP); + + if (tcp_or_udp && (l3_type == RTE_PTYPE_L3_IPV4)) { em_get_dst_port_ipv4x8(qconf, &pkts_burst[j], portid, &dst_port[j]); - } else if (pkt_type & RTE_PTYPE_L3_IPV6) { + } else if (tcp_or_udp && (l3_type == RTE_PTYPE_L3_IPV6)) { em_get_dst_port_ipv6x8(qconf, &pkts_burst[j], portid, &dst_port[j]); diff --git a/examples/l3fwd/l3fwd_em_sse.h b/examples/l3fwd/l3fwd_em_sse.h index 4c6d14f..1ee3891 100644 --- a/examples/l3fwd/l3fwd_em_sse.h +++ b/examples/l3fwd/l3fwd_em_sse.h @@ -43,8 +43,13 @@ em_get_dst_port(const struct lcore_conf *qconf, struct rte_mbuf *pkt, uint8_t next_hop; struct ipv4_hdr *ipv4_hdr; struct ipv6_hdr *ipv6_hdr; + uint32_t tcp_or_udp; + uint32_t l3_ptypes; - if (RTE_ETH_IS_IPV4_HDR(pkt->packet_type)) { + tcp_or_udp = pkt->packet_type & (RTE_PTYPE_L4_TCP | RTE_PTYPE_L4_UDP); + l3_ptypes = pkt->packet_type & RTE_PTYPE_L3_MASK; + + if (tcp_or_udp && (l3_ptypes == RTE_PTYPE_L3_IPV4)) { /* Handle IPv4 headers.*/ ipv4_hdr = rte_pktmbuf_mtod_offset(pkt, struct ipv4_hdr *, @@ -59,7 +64,7 @@ em_get_dst_port(const struct lcore_conf *qconf, struct rte_mbuf *pkt, return next_hop; - } else if (RTE_ETH_IS_IPV6_HDR(pkt->packet_type)) { + } else if (tcp_or_udp && (l3_ptypes == RTE_PTYPE_L3_IPV6)) { /* Handle IPv6 headers.*/ ipv6_hdr = rte_pktmbuf_mtod_offset(pkt, struct ipv6_hdr *, diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c index e0ed3c4..8288035 100644 --- a/examples/l3fwd/l3fwd_lpm.c +++ b/examples/l3fwd/l3fwd_lpm.c @@ -280,6 +280,77 @@ setup_lpm(const int socketid) } } +int +lpm_check_ptype(int portid) +{ + int i, ret; + int ptype_l3_ipv4 = 0, ptype_l3_ipv6 = 0; + + ret = rte_eth_dev_get_ptype_info(portid, RTE_PTYPE_L3_MASK, NULL, 0); + if (ret <= 0) + return 0; + + uint32_t ptypes[ret]; + + ret = rte_eth_dev_get_ptype_info(portid, RTE_PTYPE_L3_MASK, + ptypes, ret); + for (i = 0; i < ret; ++i) { + if (ptypes[i] & RTE_PTYPE_L3_IPV4) + ptype_l3_ipv4 = 1; + if (ptypes[i] & RTE_PTYPE_L3_IPV6) + ptype_l3_ipv6 = 1; + } + + if (ptype_l3_ipv4 == 0) + printf("port %d cannot parse RTE_PTYPE_L3_IPV4\n", portid); + + if (ptype_l3_ipv6 == 0) + printf("port %d cannot parse RTE_PTYPE_L3_IPV6\n", portid); + + if (ptype_l3_ipv4 && ptype_l3_ipv6) + return 1; + + return 0; + +} + +static inline void +lpm_parse_ptype(struct rte_mbuf *m) +{ + struct ether_hdr *eth_hdr; + uint32_t packet_type = RTE_PTYPE_UNKNOWN; + uint16_t ethertype; + + eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *); + ethertype = rte_be_to_cpu_16(eth_hdr->ether_type); + switch (ethertype) { + case ETHER_TYPE_IPv4: + packet_type |= RTE_PTYPE_L3_IPV4_EXT_UNKNOWN; + break; + case ETHER_TYPE_IPv6: + packet_type |= RTE_PTYPE_L3_IPV6_EXT_UNKNOWN; + break; + default: + break; + } + + m->packet_type = packet_type; +} + +uint16_t +lpm_cb_parse_ptype(uint8_t port __rte_unused, uint16_t queue __rte_unused, + struct rte_mbuf *pkts[], uint16_t nb_pkts, + uint16_t max_pkts __rte_unused, + void *user_param __rte_unused) +{ + unsigned i; + + for (i = 0; i < nb_pkts; ++i) + lpm_parse_ptype(pkts[i]); + + return nb_pkts; +} + /* Return ipv4/ipv6 lpm fwd lookup struct. */ void * lpm_get_ipv4_l3fwd_lookup_struct(const int socketid) diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c index 0e33039..e8d053b 100644 --- a/examples/l3fwd/main.c +++ b/examples/l3fwd/main.c @@ -103,6 +103,8 @@ static int l3fwd_lpm_on; static int l3fwd_em_on; static int numa_on = 1; /**< NUMA is enabled by default. */ +static int parse_ptype; /**< Parse packet type using rx callback, and */ + /**< disabled by default */ /* Global variables. */ @@ -172,6 +174,8 @@ static struct rte_mempool * pktmbuf_pool[NB_SOCKETS]; struct l3fwd_lkp_mode { void (*setup)(int); + int (*check_ptype)(int); + rte_rx_callback_fn cb_parse_ptype; int (*main_loop)(void *); void* (*get_ipv4_lookup_struct)(int); void* (*get_ipv6_lookup_struct)(int); @@ -181,6 +185,8 @@ static struct l3fwd_lkp_mode l3fwd_lkp; static struct l3fwd_lkp_mode l3fwd_em_lkp = { .setup = setup_hash, + .check_ptype = em_check_ptype, + .cb_parse_ptype = em_cb_parse_ptype, .main_loop = em_main_loop, .get_ipv4_lookup_struct = em_get_ipv4_l3fwd_lookup_struct, .get_ipv6_lookup_struct = em_get_ipv6_l3fwd_lookup_struct, @@ -188,6 +194,8 @@ static struct l3fwd_lkp_mode l3fwd_em_lkp = { static struct l3fwd_lkp_mode l3fwd_lpm_lkp = { .setup = setup_lpm, + .check_ptype = lpm_check_ptype, + .cb_parse_ptype = lpm_cb_parse_ptype, .main_loop = lpm_main_loop, .get_ipv4_lookup_struct = lpm_get_ipv4_l3fwd_lookup_struct, .get_ipv6_lookup_struct = lpm_get_ipv6_l3fwd_lookup_struct, @@ -456,6 +464,7 @@ parse_eth_dest(const char *optarg) #define CMD_LINE_OPT_IPV6 "ipv6" #define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo" #define CMD_LINE_OPT_HASH_ENTRY_NUM "hash-entry-num" +#define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype" /* * This expression is used to calculate the number of mbufs needed @@ -486,6 +495,7 @@ parse_args(int argc, char **argv) {CMD_LINE_OPT_IPV6, 0, 0, 0}, {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, 0}, {CMD_LINE_OPT_HASH_ENTRY_NUM, 1, 0, 0}, + {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0}, {NULL, 0, 0, 0} }; @@ -612,6 +622,14 @@ parse_args(int argc, char **argv) return -1; } } + + if (!strncmp(lgopts[option_index].name, + CMD_LINE_OPT_PARSE_PTYPE, + sizeof(CMD_LINE_OPT_PARSE_PTYPE))) { + printf("soft parse-ptype is enabled\n"); + parse_ptype = 1; + } + break; default: @@ -965,6 +983,40 @@ main(int argc, char **argv) rte_eth_promiscuous_enable(portid); } + printf("\n"); + + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { + if (rte_lcore_is_enabled(lcore_id) == 0) + continue; + qconf = &lcore_conf[lcore_id]; + for (queue = 0; queue < qconf->n_rx_queue; ++queue) { + portid = qconf->rx_queue_list[queue].port_id; + queueid = qconf->rx_queue_list[queue].queue_id; + + ret = l3fwd_lkp.check_ptype(portid); + if (ret) { + printf("Port %d: built-in packet type info\n", + portid); + continue; + } + if (!parse_ptype) + rte_exit(EXIT_FAILURE, + "port %d cannot parse packet type, please add --%s\n", + portid, CMD_LINE_OPT_PARSE_PTYPE); + + printf("Port %d: softly parse packet type info\n", + portid); + if (rte_eth_add_rx_callback(portid, queueid, + l3fwd_lkp.cb_parse_ptype, + NULL)) + continue; + rte_exit(EXIT_FAILURE, + "Failed to add rx callback: port=%d\n", + portid); + } + } + + check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask); ret = 0; -- 2.1.4