From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 1/3] ethdev: add vlan type for setting ether type
Date: Mon, 7 Mar 2016 16:12:48 +0800 [thread overview]
Message-ID: <1457338370-32744-2-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1457338370-32744-1-git-send-email-helin.zhang@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e are
also added.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
app/test-pmd/cmdline.c | 29 ++++++++++++++++++++---------
app/test-pmd/config.c | 14 +++++++++++---
app/test-pmd/testpmd.h | 3 ++-
doc/guides/rel_notes/deprecation.rst | 6 ++++++
doc/guides/rel_notes/release_16_04.rst | 4 ++++
drivers/net/e1000/igb_ethdev.c | 26 +++++++++++++++++++++++---
drivers/net/i40e/i40e_ethdev.c | 9 ++++++++-
drivers/net/ixgbe/ixgbe_ethdev.c | 25 ++++++++++++++++++++++---
lib/librte_ether/rte_ethdev.c | 12 ++++++++++--
lib/librte_ether/rte_ethdev.h | 24 ++++++++++++++++++++++--
10 files changed, 128 insertions(+), 24 deletions(-)
v2:
- Used RTE_NEXT_ABI to avoid ABI change issue.
- Reworked the announcement of ABI change for release 16.07.
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 52e9f5f..39a1202 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -277,8 +277,8 @@ static void cmd_help_long_parsed(void *parsed_result,
" Set the VLAN QinQ (extended queue in queue)"
" on a port.\n\n"
- "vlan set tpid (value) (port_id)\n"
- " Set the outer VLAN TPID for Packet Filtering on"
+ "vlan set (inner|outer) tpid (value) (port_id)\n"
+ " Set the VLAN TPID for Packet Filtering on"
" a port\n\n"
"rx_vlan add (vlan_id|all) (port_id)\n"
@@ -297,10 +297,6 @@ static void cmd_help_long_parsed(void *parsed_result,
" Remove a vlan_id, to the set of VLAN identifiers"
"filtered for VF(s) from port_id.\n\n"
- "rx_vlan set tpid (value) (port_id)\n"
- " Set the outer VLAN TPID for Packet Filtering on"
- " a port\n\n"
-
"tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) "
"(inner_vlan) (vxlan|nvgre) (filter_type) (tenant_id) (queue_id)\n"
" add a tunnel filter of a port.\n\n"
@@ -2847,6 +2843,7 @@ cmdline_parse_inst_t cmd_vlan_offload = {
struct cmd_vlan_tpid_result {
cmdline_fixed_string_t vlan;
cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vlan_type;
cmdline_fixed_string_t what;
uint16_t tp_id;
uint8_t port_id;
@@ -2858,8 +2855,17 @@ cmd_vlan_tpid_parsed(void *parsed_result,
__attribute__((unused)) void *data)
{
struct cmd_vlan_tpid_result *res = parsed_result;
- vlan_tpid_set(res->port_id, res->tp_id);
- return;
+ enum rte_vlan_type vlan_type;
+
+ if (!strcmp(res->vlan_type, "inner"))
+ vlan_type = ETH_VLAN_TYPE_INNER;
+ else if (!strcmp(res->vlan_type, "outer"))
+ vlan_type = ETH_VLAN_TYPE_OUTER;
+ else {
+ printf("Unknown vlan type\n");
+ return;
+ }
+ vlan_tpid_set(res->port_id, vlan_type, res->tp_id);
}
cmdline_parse_token_string_t cmd_vlan_tpid_vlan =
@@ -2868,6 +2874,9 @@ cmdline_parse_token_string_t cmd_vlan_tpid_vlan =
cmdline_parse_token_string_t cmd_vlan_tpid_set =
TOKEN_STRING_INITIALIZER(struct cmd_vlan_tpid_result,
set, "set");
+cmdline_parse_token_string_t cmd_vlan_type =
+ TOKEN_STRING_INITIALIZER(struct cmd_vlan_tpid_result,
+ vlan_type, "inner#outer");
cmdline_parse_token_string_t cmd_vlan_tpid_what =
TOKEN_STRING_INITIALIZER(struct cmd_vlan_tpid_result,
what, "tpid");
@@ -2881,10 +2890,12 @@ cmdline_parse_token_num_t cmd_vlan_tpid_portid =
cmdline_parse_inst_t cmd_vlan_tpid = {
.f = cmd_vlan_tpid_parsed,
.data = NULL,
- .help_str = "set tpid tp_id port_id, set the Outer VLAN Ether type",
+ .help_str = "set inner|outer tpid tp_id port_id, set the VLAN "
+ "Ether type",
.tokens = {
(void *)&cmd_vlan_tpid_vlan,
(void *)&cmd_vlan_tpid_set,
+ (void *)&cmd_vlan_type,
(void *)&cmd_vlan_tpid_what,
(void *)&cmd_vlan_tpid_tpid,
(void *)&cmd_vlan_tpid_portid,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 0062484..db64d57 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1821,19 +1821,27 @@ rx_vlan_all_filter_set(portid_t port_id, int on)
}
void
-vlan_tpid_set(portid_t port_id, uint16_t tp_id)
+vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type, uint16_t tp_id)
{
int diag;
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
+#ifdef RTE_NEXT_ABI
+ diag = rte_eth_dev_set_vlan_ether_type(port_id, vlan_type, tp_id);
+#else
+ if (vlan_type != ETH_VLAN_TYPE_INNER) {
+ printf("VLAN type not supported\n");
+ return;
+ }
diag = rte_eth_dev_set_vlan_ether_type(port_id, tp_id);
+#endif /* RTE_NEXT_ABI */
if (diag == 0)
return;
- printf("tx_vlan_tpid_set(port_pi=%d, tpid=%d) failed "
+ printf("tx_vlan_tpid_set(port_pi=%d, vlan_type=%d, tpid=%d) failed "
"diag=%d\n",
- port_id, tp_id, diag);
+ port_id, vlan_type, tp_id, diag);
}
void
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index b618998..0f72ca1 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -508,7 +508,8 @@ void rx_vlan_filter_set(portid_t port_id, int on);
void rx_vlan_all_filter_set(portid_t port_id, int on);
int rx_vft_set(portid_t port_id, uint16_t vlan_id, int on);
void vlan_extend_set(portid_t port_id, int on);
-void vlan_tpid_set(portid_t port_id, uint16_t tp_id);
+void vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type,
+ uint16_t tp_id);
void tx_vlan_set(portid_t port_id, uint16_t vlan_id);
void tx_qinq_set(portid_t port_id, uint16_t vlan_id, uint16_t vlan_id_outer);
void tx_vlan_reset(portid_t port_id);
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index e94d4a2..dd10501 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -49,3 +49,9 @@ Deprecation Notices
commands (such as RETA update in testpmd). This should impact
CMDLINE_PARSE_RESULT_BUFSIZE, STR_TOKEN_SIZE and RDLINE_BUF_SIZE.
It should be integrated in release 2.3.
+
+* ABI changes are planned for typedef of ``vlan_tpid_set_t``, one more
+ parameter of ``vlan_type`` will be added, and its return value will be
+ changed from ``void`` to ``int``, from release 16.07. Thus, ethdev structure
+ of ``eth_dev_ops`` and interface of ``rte_eth_dev_set_vlan_ether_type`` will
+ be affected.
diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst
index 73494f9..d1a3e7e 100644
--- a/doc/guides/rel_notes/release_16_04.rst
+++ b/doc/guides/rel_notes/release_16_04.rst
@@ -74,6 +74,10 @@ This section should contain new features added in this release. Sample format:
* **szedata2: Add functions for setting link up/down.**
+* **Added modifying ether type of both single and double VLAN for i40e**
+
+ Macro of RTE_NEXT_ABI was introduced, as ABI change involved.
+
Resolved Issues
---------------
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index 41c107d..5b2e381 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -126,7 +126,11 @@ static int eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
static int eth_igb_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id, int on);
-static void eth_igb_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid_id);
+static void eth_igb_vlan_tpid_set(struct rte_eth_dev *dev,
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type vlan_type,
+#endif
+ uint16_t tpid_id);
static void eth_igb_vlan_offload_set(struct rte_eth_dev *dev, int mask);
static void igb_vlan_hw_filter_enable(struct rte_eth_dev *dev);
@@ -2194,14 +2198,30 @@ eth_igb_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
}
static void
-eth_igb_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid)
+eth_igb_vlan_tpid_set(struct rte_eth_dev *dev,
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type vlan_type,
+#endif
+ uint16_t tpid)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- uint32_t reg = ETHER_TYPE_VLAN ;
+ uint32_t reg = ETHER_TYPE_VLAN;
+#ifdef RTE_NEXT_ABI
+ switch (vlan_type) {
+ case ETH_VLAN_TYPE_INNER:
+ reg |= (tpid << 16);
+ E1000_WRITE_REG(hw, E1000_VET, reg);
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Unsupported vlan type %d\n", vlan_type);
+ break;
+ }
+#else
reg |= (tpid << 16);
E1000_WRITE_REG(hw, E1000_VET, reg);
+#endif /* RTE_NEXT_ABI */
}
static void
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index c86febc..1da5690 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -299,7 +299,11 @@ static void i40e_dev_info_get(struct rte_eth_dev *dev,
static int i40e_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id,
int on);
-static void i40e_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid);
+static void i40e_vlan_tpid_set(struct rte_eth_dev *dev,
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type vlan_type,
+#endif
+ uint16_t tpid);
static void i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask);
static void i40e_vlan_strip_queue_set(struct rte_eth_dev *dev,
uint16_t queue,
@@ -2321,6 +2325,9 @@ i40e_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
static void
i40e_vlan_tpid_set(__rte_unused struct rte_eth_dev *dev,
+#ifdef RTE_NEXT_ABI
+ __rte_unused enum rte_vlan_type vlan_type,
+#endif
__rte_unused uint16_t tpid)
{
PMD_INIT_FUNC_TRACE();
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 2d8eaac..a2175a0 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -172,7 +172,11 @@ static int ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
static int ixgbe_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id, int on);
-static void ixgbe_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid_id);
+static void ixgbe_vlan_tpid_set(struct rte_eth_dev *dev,
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type vlan_type,
+#endif
+ uint16_t tpid_id);
static void ixgbe_vlan_hw_strip_bitmap_set(struct rte_eth_dev *dev,
uint16_t queue, bool on);
static void ixgbe_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue,
@@ -1519,13 +1523,28 @@ ixgbe_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
}
static void
-ixgbe_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid)
+ixgbe_vlan_tpid_set(struct rte_eth_dev *dev,
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type vlan_type,
+#endif
+ uint16_t tpid)
{
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- /* Only the high 16-bits is valid */
+#ifdef RTE_NEXT_ABI
+ switch (vlan_type) {
+ case ETH_VLAN_TYPE_INNER:
+ /* Only the high 16-bits is valid */
+ IXGBE_WRITE_REG(hw, IXGBE_EXVET, tpid << 16);
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Unsupported vlan type %d\n", vlan_type);
+ break;
+ }
+#else
IXGBE_WRITE_REG(hw, IXGBE_EXVET, tpid << 16);
+#endif /* RTE_NEXT_ABI */
}
void
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index a6e83c1..3337321 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1697,14 +1697,22 @@ rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id, int o
}
int
-rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tpid)
+rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type vlan_type,
+#endif
+ uint16_t tpid)
{
struct rte_eth_dev *dev;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
dev = &rte_eth_devices[port_id];
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_tpid_set, -ENOTSUP);
- (*dev->dev_ops->vlan_tpid_set)(dev, tpid);
+ (*dev->dev_ops->vlan_tpid_set)(dev,
+#ifdef RTE_NEXT_ABI
+ vlan_type,
+#endif
+ tpid);
return 0;
}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index e2893ba..f8d49af 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -351,6 +351,17 @@ struct rte_eth_rxmode {
};
/**
+ * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN.
+ * Note that most of time single VLAN is treated the same as inner VLAN.
+ */
+enum rte_vlan_type {
+ ETH_VLAN_TYPE_UNKNOWN = 0,
+ ETH_VLAN_TYPE_INNER, /**< Single VLAN, or inner VLAN. */
+ ETH_VLAN_TYPE_OUTER, /**< Outer VLAN. */
+ ETH_VLAN_TYPE_MAX,
+};
+
+/**
* A structure used to configure the Receive Side Scaling (RSS) feature
* of an Ethernet port.
* If not NULL, the *rss_key* pointer of the *rss_conf* structure points
@@ -1077,7 +1088,10 @@ typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
/**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */
typedef void (*vlan_tpid_set_t)(struct rte_eth_dev *dev,
- uint16_t tpid);
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type type,
+#endif
+ uint16_t tpid);
/**< @internal set the outer VLAN-TPID by an Ethernet device. */
typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
@@ -2346,6 +2360,8 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
*
* @param port_id
* The port identifier of the Ethernet device.
+ * @vlan_type
+ * The vlan type.
* @param tag_type
* The Tag Protocol ID
* @return
@@ -2353,7 +2369,11 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
* - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tag_type);
+int rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+#ifdef RTE_NEXT_ABI
+ enum rte_vlan_type vlan_type,
+#endif
+ uint16_t tag_type);
/**
* Set VLAN offload configuration on an Ethernet device
--
2.5.0
next prev parent reply other threads:[~2016-03-07 8:13 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-22 1:37 [dpdk-dev] [PATCH 0/2] i40e setting ether type of VLANs Helin Zhang
2016-01-22 1:37 ` [dpdk-dev] [PATCH 1/2] ethdev: add vlan type for setting ether type Helin Zhang
2016-01-22 1:37 ` [dpdk-dev] [PATCH 2/2] i40e: add VLAN ether type config Helin Zhang
2016-03-07 8:12 ` [dpdk-dev] [PATCH v2 0/3] i40e setting ether type of VLANs Helin Zhang
2016-03-07 8:12 ` Helin Zhang [this message]
2016-03-07 8:12 ` [dpdk-dev] [PATCH v2 2/3] i40e: add VLAN ether type config Helin Zhang
2016-03-07 8:12 ` [dpdk-dev] [PATCH v2 3/3] i40e: fix the overflow issue Helin Zhang
2016-03-07 9:28 ` [dpdk-dev] [PATCH v2 0/3] i40e setting ether type of VLANs Thomas Monjalon
2016-03-09 15:20 ` Zhang, Helin
2016-03-10 16:36 ` [dpdk-dev] [PATCH v3 0/2] " Helin Zhang
2016-03-10 16:36 ` [dpdk-dev] [PATCH v3 1/2] ethdev: add vlan type for setting ether type Helin Zhang
2016-03-10 16:36 ` [dpdk-dev] [PATCH v3 2/2] i40e: fix the overflow issue Helin Zhang
2016-03-11 2:36 ` [dpdk-dev] [PATCH v3 0/2] i40e setting ether type of VLANs Lu, Wenzhuo
2016-03-11 8:49 ` [dpdk-dev] [PATCH v4 " Helin Zhang
2016-03-11 8:49 ` [dpdk-dev] [PATCH v4 1/2] ethdev: add vlan type for setting ether type Helin Zhang
2016-03-11 11:19 ` Panu Matilainen
2016-03-11 11:20 ` Thomas Monjalon
2016-03-11 14:17 ` Zhang, Helin
2016-03-11 14:20 ` Thomas Monjalon
2016-03-11 8:49 ` [dpdk-dev] [PATCH v4 2/2] i40e: fix the overflow issue Helin Zhang
2016-03-11 16:50 ` [dpdk-dev] [PATCH v5 0/2] i40e setting ether type of VLANs Helin Zhang
2016-03-11 16:50 ` [dpdk-dev] [PATCH v5 1/2] ethdev: add vlan type for setting ether type Helin Zhang
2016-03-11 16:50 ` [dpdk-dev] [PATCH v5 2/2] i40e: fix the overflow issue Helin Zhang
2016-03-11 20:20 ` [dpdk-dev] [PATCH v5 0/2] i40e setting ether type of VLANs Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457338370-32744-2-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).