From: Jingjing Wu <jingjing.wu@intel.com>
To: bruce.richardson@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 1/2] i40evf: allocate virtchnl cmd buffer for each vf
Date: Wed, 9 Mar 2016 14:00:48 +0800 [thread overview]
Message-ID: <1457503249-14878-2-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1457503249-14878-1-git-send-email-jingjing.wu@intel.com>
Currently, i40evf PMD uses a global static buffer to send virtchnl
command to host driver. It is shared by multi VFs.
This patch changed to allocate virtchnl cmd buffer for each VF.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.h | 2 +
drivers/net/i40e/i40e_ethdev_vf.c | 178 +++++++++++++++-----------------------
2 files changed, 71 insertions(+), 109 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index a9b805e..8cd6126 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -497,7 +497,9 @@ struct i40e_vf {
bool link_up;
bool vf_reset;
volatile uint32_t pend_cmd; /* pending command not finished yet */
+ uint32_t cmd_retval; /* return value of the cmd response from PF */
u16 pend_msg; /* flags indicates events from pf not handled yet */
+ uint8_t *aq_resp; /* buffer to store the adminq response from PF */
/* VSI info */
struct i40e_virtchnl_vf_resource *vf_res; /* All VSIs */
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 6185ee8..90edeb5 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -103,9 +103,6 @@ enum i40evf_aq_result {
I40EVF_MSG_CMD, /* Read async command result */
};
-/* A share buffer to store the command result from PF driver */
-static uint8_t cmd_result_buffer[I40E_AQ_BUF_SZ];
-
static int i40evf_dev_configure(struct rte_eth_dev *dev);
static int i40evf_dev_start(struct rte_eth_dev *dev);
static void i40evf_dev_stop(struct rte_eth_dev *dev);
@@ -217,31 +214,37 @@ static const struct eth_dev_ops i40evf_eth_dev_ops = {
};
/*
- * Parse admin queue message.
- *
- * return value:
- * < 0: meet error
- * 0: read sys msg
- * > 0: read cmd result
+ * Read data in admin queue to get msg from pf driver
*/
static enum i40evf_aq_result
-i40evf_parse_pfmsg(struct i40e_vf *vf,
- struct i40e_arq_event_info *event,
- struct i40evf_arq_msg_info *data)
+i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
{
- enum i40e_virtchnl_ops opcode = (enum i40e_virtchnl_ops)\
- rte_le_to_cpu_32(event->desc.cookie_high);
- enum i40e_status_code retval = (enum i40e_status_code)\
- rte_le_to_cpu_32(event->desc.cookie_low);
- enum i40evf_aq_result ret = I40EVF_MSG_CMD;
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
+ struct i40e_arq_event_info event;
+ enum i40e_virtchnl_ops opcode;
+ enum i40e_status_code retval;
+ int ret;
+ enum i40evf_aq_result result = I40EVF_MSG_NON;
+
+ event.buf_len = data->buf_len;
+ event.msg_buf = data->msg;
+ ret = i40e_clean_arq_element(hw, &event, NULL);
+ /* Can't read any msg from adminQ */
+ if (ret) {
+ if (ret != I40E_ERR_ADMIN_QUEUE_NO_WORK)
+ result = I40EVF_MSG_ERR;
+ return result;
+ }
+ opcode = (enum i40e_virtchnl_ops)rte_le_to_cpu_32(event.desc.cookie_high);
+ retval = (enum i40e_status_code)rte_le_to_cpu_32(event.desc.cookie_low);
/* pf sys event */
if (opcode == I40E_VIRTCHNL_OP_EVENT) {
struct i40e_virtchnl_pf_event *vpe =
- (struct i40e_virtchnl_pf_event *)event->msg_buf;
+ (struct i40e_virtchnl_pf_event *)event.msg_buf;
- /* Initialize ret to sys event */
- ret = I40EVF_MSG_SYS;
+ result = I40EVF_MSG_SYS;
switch (vpe->event) {
case I40E_VIRTCHNL_EVENT_LINK_CHANGE:
vf->link_up =
@@ -266,74 +269,17 @@ i40evf_parse_pfmsg(struct i40e_vf *vf,
}
} else {
/* async reply msg on command issued by vf previously */
- ret = I40EVF_MSG_CMD;
+ result = I40EVF_MSG_CMD;
/* Actual data length read from PF */
- data->msg_len = event->msg_len;
+ data->msg_len = event.msg_len;
}
- /* fill the ops and result to notify VF */
+
data->result = retval;
data->ops = opcode;
- return ret;
-}
-
-/*
- * Read data in admin queue to get msg from pf driver
- */
-static enum i40evf_aq_result
-i40evf_read_pfmsg(struct rte_eth_dev *dev, struct i40evf_arq_msg_info *data)
-{
- struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- struct i40e_arq_event_info event;
- int ret;
- enum i40evf_aq_result result = I40EVF_MSG_NON;
-
- event.buf_len = data->buf_len;
- event.msg_buf = data->msg;
- ret = i40e_clean_arq_element(hw, &event, NULL);
- /* Can't read any msg from adminQ */
- if (ret) {
- if (ret == I40E_ERR_ADMIN_QUEUE_NO_WORK)
- result = I40EVF_MSG_NON;
- else
- result = I40EVF_MSG_ERR;
- return result;
- }
-
- /* Parse the event */
- result = i40evf_parse_pfmsg(vf, &event, data);
-
return result;
}
-/*
- * Polling read until command result return from pf driver or meet error.
- */
-static int
-i40evf_wait_cmd_done(struct rte_eth_dev *dev,
- struct i40evf_arq_msg_info *data)
-{
- int i = 0;
- enum i40evf_aq_result ret;
-
-#define MAX_TRY_TIMES 20
-#define ASQ_DELAY_MS 100
- do {
- /* Delay some time first */
- rte_delay_ms(ASQ_DELAY_MS);
- ret = i40evf_read_pfmsg(dev, data);
- if (ret == I40EVF_MSG_CMD)
- return 0;
- else if (ret == I40EVF_MSG_ERR)
- return -1;
-
- /* If don't read msg or read sys event, continue */
- } while(i++ < MAX_TRY_TIMES);
-
- return -1;
-}
-
/**
* clear current command. Only call in case execute
* _atomic_set_cmd successfully.
@@ -360,13 +306,18 @@ _atomic_set_cmd(struct i40e_vf *vf, enum i40e_virtchnl_ops ops)
return !ret;
}
+#define MAX_TRY_TIMES 200
+#define ASQ_DELAY_MS 10
+
static int
i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
{
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
- int err = -1;
struct i40evf_arq_msg_info info;
+ enum i40evf_aq_result ret;
+ int err = -1;
+ int i = 0;
if (_atomic_set_cmd(vf, args->ops))
return -1;
@@ -384,19 +335,21 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct vf_cmd_info *args)
return err;
}
- err = i40evf_wait_cmd_done(dev, &info);
- /* read message and it's expected one */
- if (!err && args->ops == info.ops)
- _clear_cmd(vf);
- else if (err) {
- PMD_DRV_LOG(ERR, "Failed to read message from AdminQ");
- _clear_cmd(vf);
- }
- else if (args->ops != info.ops)
- PMD_DRV_LOG(ERR, "command mismatch, expect %u, get %u",
- args->ops, info.ops);
+ do {
+ ret = i40evf_read_pfmsg(dev, &info);
+ if (ret == I40EVF_MSG_CMD) {
+ err = 0;
+ break;
+ } else if (ret == I40EVF_MSG_ERR) {
+ err = -1;
+ break;
+ }
+ rte_delay_ms(ASQ_DELAY_MS);
+ /* If don't read msg or read sys event, continue */
+ } while (i++ < MAX_TRY_TIMES);
+ _clear_cmd(vf);
- return err | info.result;
+ return err | vf->cmd_retval;
}
/*
@@ -416,7 +369,7 @@ i40evf_check_api_version(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_VERSION;
args.in_args = (uint8_t *)&version;
args.in_args_size = sizeof(version);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -454,7 +407,7 @@ i40evf_get_vf_resource(struct rte_eth_dev *dev)
uint32_t caps, len;
args.ops = I40E_VIRTCHNL_OP_GET_VF_RESOURCES;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
if (PF_IS_V11(vf)) {
caps = I40E_VIRTCHNL_VF_OFFLOAD_L2 |
@@ -507,7 +460,7 @@ i40evf_config_promisc(struct rte_eth_dev *dev,
args.ops = I40E_VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE;
args.in_args = (uint8_t *)&promisc;
args.in_args_size = sizeof(promisc);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -534,7 +487,7 @@ i40evf_config_vlan_offload(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_OFFLOAD;
args.in_args = (uint8_t *)&offload;
args.in_args_size = sizeof(offload);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -565,7 +518,7 @@ i40evf_config_vlan_pvid(struct rte_eth_dev *dev,
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CFG_VLAN_PVID;
args.in_args = (uint8_t *)&tpid_info;
args.in_args_size = sizeof(tpid_info);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -644,7 +597,7 @@ i40evf_configure_vsi_queues(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES;
args.in_args = (uint8_t *)vc_vqci;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -697,7 +650,7 @@ i40evf_configure_vsi_queues_ext(struct rte_eth_dev *dev)
(enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EXT;
args.in_args = (uint8_t *)vc_vqcei;
args.in_args_size = size;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
ret = i40evf_execute_vf_cmd(dev, &args);
if (ret)
@@ -759,7 +712,7 @@ i40evf_config_irq_map(struct rte_eth_dev *dev)
args.ops = I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP;
args.in_args = (u8 *)cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -790,7 +743,7 @@ i40evf_switch_queue(struct rte_eth_dev *dev, bool isrx, uint16_t qid,
args.ops = I40E_VIRTCHNL_OP_DISABLE_QUEUES;
args.in_args = (u8 *)&queue_select;
args.in_args_size = sizeof(queue_select);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -882,7 +835,7 @@ i40evf_add_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -919,7 +872,7 @@ i40evf_del_mac_addr(struct rte_eth_dev *dev, struct ether_addr *addr)
args.ops = I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS;
args.in_args = cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -942,7 +895,7 @@ i40evf_update_stats(struct rte_eth_dev *dev, struct i40e_eth_stats **pstats)
args.ops = I40E_VIRTCHNL_OP_GET_STATS;
args.in_args = (u8 *)&q_stats;
args.in_args_size = sizeof(q_stats);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
@@ -1036,7 +989,7 @@ i40evf_add_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_ADD_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1063,7 +1016,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
args.ops = I40E_VIRTCHNL_OP_DEL_VLAN;
args.in_args = (u8 *)&cmd_buffer;
args.in_args_size = sizeof(cmd_buffer);
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err)
@@ -1075,6 +1028,7 @@ i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
static int
i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
{
+ struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
int err;
struct vf_cmd_info args;
struct rte_eth_link *new_link;
@@ -1082,7 +1036,7 @@ i40evf_get_link_status(struct rte_eth_dev *dev, struct rte_eth_link *link)
args.ops = (enum i40e_virtchnl_ops)I40E_VIRTCHNL_OP_GET_LINK_STAT;
args.in_args = NULL;
args.in_args_size = 0;
- args.out_buffer = cmd_result_buffer;
+ args.out_buffer = vf->aq_resp;
args.out_size = I40E_AQ_BUF_SZ;
err = i40evf_execute_vf_cmd(dev, &args);
if (err) {
@@ -1177,7 +1131,6 @@ i40evf_init_vf(struct rte_eth_dev *dev)
goto err;
}
-
/* Reset VF and wait until it's complete */
if (i40evf_reset_vf(hw)) {
PMD_INIT_LOG(ERR, "reset NIC failed");
@@ -1195,6 +1148,11 @@ i40evf_init_vf(struct rte_eth_dev *dev)
PMD_INIT_LOG(ERR, "init_adminq failed");
return -1;
}
+ vf->aq_resp = rte_zmalloc("vf_aq_resp", I40E_AQ_BUF_SZ, 0);
+ if (!vf->aq_resp) {
+ PMD_INIT_LOG(ERR, "unable to allocate vf_aq_resp memory");
+ goto err_aq;
+ }
if (i40evf_check_api_version(dev) != 0) {
PMD_INIT_LOG(ERR, "check_api version failed");
goto err_aq;
@@ -1259,6 +1217,8 @@ i40evf_uninit_vf(struct rte_eth_dev *dev)
i40evf_dev_close(dev);
rte_free(vf->vf_res);
vf->vf_res = NULL;
+ rte_free(vf->aq_resp);
+ vf->aq_resp = NULL;
return 0;
}
--
2.4.0
next prev parent reply other threads:[~2016-03-09 6:00 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-13 12:31 [dpdk-dev] [PATCH 0/2] i40evf: support interrupt based pf reset request Jingjing Wu
2016-01-13 12:31 ` [dpdk-dev] [PATCH 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-01-13 12:31 ` [dpdk-dev] [PATCH 2/2] i40evf: support interrupt based pf reset request Jingjing Wu
2016-01-27 1:49 ` [dpdk-dev] [PATCH v2 0/2] " Jingjing Wu
2016-01-27 1:49 ` [dpdk-dev] [PATCH v2 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-01-29 7:28 ` Tao, Zhe
2016-02-14 2:22 ` Wu, Jingjing
2016-02-22 7:26 ` Zhang, Helin
2016-01-27 1:49 ` [dpdk-dev] [PATCH v2 2/2] i40evf: support interrupt based pf reset request Jingjing Wu
2016-01-27 8:34 ` David Marchand
2016-02-14 3:25 ` Wu, Jingjing
2016-02-15 13:16 ` David Marchand
2016-02-18 4:06 ` Zhe Tao
2016-02-19 5:51 ` Wu, Jingjing
2016-01-28 7:03 ` Tao, Zhe
2016-02-14 2:12 ` Wu, Jingjing
2016-01-29 8:50 ` Tao, Zhe
2016-02-14 3:04 ` Wu, Jingjing
2016-02-22 8:26 ` Zhang, Helin
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Jingjing Wu
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-02-26 8:12 ` Zhang, Helin
2016-02-26 6:51 ` [dpdk-dev] [PATCH v3 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-02-26 8:13 ` Zhang, Helin
2016-03-08 17:44 ` [dpdk-dev] [PATCH v3 0/2] i40evf: pf reset event report Bruce Richardson
2016-03-09 3:08 ` Zhe Tao
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 " Jingjing Wu
2016-03-09 6:00 ` Jingjing Wu [this message]
2016-03-09 6:00 ` [dpdk-dev] [PATCH v4 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-09 9:59 ` Thomas Monjalon
2016-03-09 11:01 ` Bruce Richardson
2016-03-09 11:26 ` [dpdk-dev] expectations on maintainer's review Thomas Monjalon
2016-03-09 14:15 ` Bruce Richardson
2016-03-09 14:19 ` Thomas Monjalon
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-14 12:21 ` Bruce Richardson
2016-03-10 3:41 ` [dpdk-dev] [PATCH v5 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 1/2] i40evf: allocate virtchnl cmd buffer for each vf Jingjing Wu
2016-03-15 1:59 ` [dpdk-dev] [PATCH v6 2/2] i40evf: support to report pf reset event Jingjing Wu
2016-03-22 15:13 ` [dpdk-dev] [PATCH v6 0/2] i40evf: pf reset event report Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457503249-14878-2-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).