From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 1/2] ethdev: add vlan type for setting ether type
Date: Fri, 11 Mar 2016 16:49:38 +0800 [thread overview]
Message-ID: <1457686179-20435-2-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1457686179-20435-1-git-send-email-helin.zhang@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
app/test-pmd/cmdline.c | 30 +++++++++-----
app/test-pmd/config.c | 9 +++--
app/test-pmd/testpmd.h | 3 +-
doc/guides/rel_notes/release_16_04.rst | 4 ++
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 11 +----
drivers/net/e1000/igb_ethdev.c | 21 +++++++---
drivers/net/i40e/i40e_ethdev.c | 63 +++++++++++++++++++++++++++--
drivers/net/ixgbe/ixgbe_ethdev.c | 19 +++++++--
lib/librte_ether/rte_ethdev.c | 25 +++++++++++-
lib/librte_ether/rte_ethdev.h | 23 ++++++++++-
lib/librte_ether/rte_ether_version.map | 7 ++++
11 files changed, 175 insertions(+), 40 deletions(-)
v4:
- Updated the doc of testpmd guide.
v3:
- Used versioning mechanism to avoid ABI issue.
- Re-organized the patch set.
v2:
- Used RTE_NEXT_ABI to avoid ABI change issue.
- Reworked the announcement of ABI change for release 16.07.
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 52e9f5f..1eeb8a8 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -277,8 +277,8 @@ static void cmd_help_long_parsed(void *parsed_result,
" Set the VLAN QinQ (extended queue in queue)"
" on a port.\n\n"
- "vlan set tpid (value) (port_id)\n"
- " Set the outer VLAN TPID for Packet Filtering on"
+ "vlan set (inner|outer) tpid (value) (port_id)\n"
+ " Set the VLAN TPID for Packet Filtering on"
" a port\n\n"
"rx_vlan add (vlan_id|all) (port_id)\n"
@@ -297,10 +297,6 @@ static void cmd_help_long_parsed(void *parsed_result,
" Remove a vlan_id, to the set of VLAN identifiers"
"filtered for VF(s) from port_id.\n\n"
- "rx_vlan set tpid (value) (port_id)\n"
- " Set the outer VLAN TPID for Packet Filtering on"
- " a port\n\n"
-
"tunnel_filter add (port_id) (outer_mac) (inner_mac) (ip_addr) "
"(inner_vlan) (vxlan|nvgre) (filter_type) (tenant_id) (queue_id)\n"
" add a tunnel filter of a port.\n\n"
@@ -2747,6 +2743,7 @@ cmdline_parse_inst_t cmd_rx_vlan_filter_all = {
struct cmd_vlan_offload_result {
cmdline_fixed_string_t vlan;
cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vlan_type;
cmdline_fixed_string_t what;
cmdline_fixed_string_t on;
cmdline_fixed_string_t port_id;
@@ -2847,6 +2844,7 @@ cmdline_parse_inst_t cmd_vlan_offload = {
struct cmd_vlan_tpid_result {
cmdline_fixed_string_t vlan;
cmdline_fixed_string_t set;
+ cmdline_fixed_string_t vlan_type;
cmdline_fixed_string_t what;
uint16_t tp_id;
uint8_t port_id;
@@ -2858,8 +2856,17 @@ cmd_vlan_tpid_parsed(void *parsed_result,
__attribute__((unused)) void *data)
{
struct cmd_vlan_tpid_result *res = parsed_result;
- vlan_tpid_set(res->port_id, res->tp_id);
- return;
+ enum rte_vlan_type vlan_type;
+
+ if (!strcmp(res->vlan_type, "inner"))
+ vlan_type = ETH_VLAN_TYPE_INNER;
+ else if (!strcmp(res->vlan_type, "outer"))
+ vlan_type = ETH_VLAN_TYPE_OUTER;
+ else {
+ printf("Unknown vlan type\n");
+ return;
+ }
+ vlan_tpid_set(res->port_id, vlan_type, res->tp_id);
}
cmdline_parse_token_string_t cmd_vlan_tpid_vlan =
@@ -2868,6 +2875,9 @@ cmdline_parse_token_string_t cmd_vlan_tpid_vlan =
cmdline_parse_token_string_t cmd_vlan_tpid_set =
TOKEN_STRING_INITIALIZER(struct cmd_vlan_tpid_result,
set, "set");
+cmdline_parse_token_string_t cmd_vlan_type =
+ TOKEN_STRING_INITIALIZER(struct cmd_vlan_tpid_result,
+ vlan_type, "inner#outer");
cmdline_parse_token_string_t cmd_vlan_tpid_what =
TOKEN_STRING_INITIALIZER(struct cmd_vlan_tpid_result,
what, "tpid");
@@ -2881,10 +2891,12 @@ cmdline_parse_token_num_t cmd_vlan_tpid_portid =
cmdline_parse_inst_t cmd_vlan_tpid = {
.f = cmd_vlan_tpid_parsed,
.data = NULL,
- .help_str = "set tpid tp_id port_id, set the Outer VLAN Ether type",
+ .help_str = "set inner|outer tpid tp_id port_id, set the VLAN "
+ "Ether type",
.tokens = {
(void *)&cmd_vlan_tpid_vlan,
(void *)&cmd_vlan_tpid_set,
+ (void *)&cmd_vlan_type,
(void *)&cmd_vlan_tpid_what,
(void *)&cmd_vlan_tpid_tpid,
(void *)&cmd_vlan_tpid_portid,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 0062484..5bb09a5 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1821,19 +1821,20 @@ rx_vlan_all_filter_set(portid_t port_id, int on)
}
void
-vlan_tpid_set(portid_t port_id, uint16_t tp_id)
+vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type, uint16_t tp_id)
{
int diag;
+
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
- diag = rte_eth_dev_set_vlan_ether_type(port_id, tp_id);
+ diag = rte_eth_dev_set_vlan_ether_type(port_id, vlan_type, tp_id);
if (diag == 0)
return;
- printf("tx_vlan_tpid_set(port_pi=%d, tpid=%d) failed "
+ printf("tx_vlan_tpid_set(port_pi=%d, vlan_type=%d, tpid=%d) failed "
"diag=%d\n",
- port_id, tp_id, diag);
+ port_id, vlan_type, tp_id, diag);
}
void
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index b618998..0f72ca1 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -508,7 +508,8 @@ void rx_vlan_filter_set(portid_t port_id, int on);
void rx_vlan_all_filter_set(portid_t port_id, int on);
int rx_vft_set(portid_t port_id, uint16_t vlan_id, int on);
void vlan_extend_set(portid_t port_id, int on);
-void vlan_tpid_set(portid_t port_id, uint16_t tp_id);
+void vlan_tpid_set(portid_t port_id, enum rte_vlan_type vlan_type,
+ uint16_t tp_id);
void tx_vlan_set(portid_t port_id, uint16_t vlan_id);
void tx_qinq_set(portid_t port_id, uint16_t vlan_id, uint16_t vlan_id_outer);
void tx_vlan_reset(portid_t port_id);
diff --git a/doc/guides/rel_notes/release_16_04.rst b/doc/guides/rel_notes/release_16_04.rst
index 7c09fef..c6e5ef0 100644
--- a/doc/guides/rel_notes/release_16_04.rst
+++ b/doc/guides/rel_notes/release_16_04.rst
@@ -125,6 +125,10 @@ This section should contain new features added in this release. Sample format:
Af_packet device can now be detached using API, like other PMD devices.
+* **Added modifying ether type of both single and double VLAN for i40e**
+
+ Versioning mechanism was introduced, to avoid any ABI issue.
+
Resolved Issues
---------------
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a520cc5..e2b2224 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -498,9 +498,9 @@ Set the VLAN QinQ (extended queue in queue) on for a port::
vlan set tpid
~~~~~~~~~~~~~
-Set the outer VLAN TPID for packet filtering on a port::
+Set the inner or outer VLAN TPID for packet filtering on a port::
- testpmd> vlan set tpid (value) (port_id)
+ testpmd> vlan set (inner|outer) tpid (value) (port_id)
.. note::
@@ -540,13 +540,6 @@ Remove a VLAN ID, from the set of VLAN identifiers filtered for VF(s) for port I
testpmd> rx_vlan rm (vlan_id) port (port_id) vf (vf_mask)
-rx_vlan set tpid
-~~~~~~~~~~~~~~~~
-
-Set the outer VLAN TPID for packet filtering on a port::
-
- testpmd> rx_vlan set tpid (value) (port_id)
-
tunnel_filter add
~~~~~~~~~~~~~~~~~
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index f889876..4549e0a 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -126,7 +126,9 @@ static int eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
static int eth_igb_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id, int on);
-static void eth_igb_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid_id);
+static void eth_igb_vlan_tpid_set(struct rte_eth_dev *dev,
+ enum rte_vlan_type vlan_type,
+ uint16_t tpid_id);
static void eth_igb_vlan_offload_set(struct rte_eth_dev *dev, int mask);
static void igb_vlan_hw_filter_enable(struct rte_eth_dev *dev);
@@ -2194,14 +2196,23 @@ eth_igb_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
}
static void
-eth_igb_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid)
+eth_igb_vlan_tpid_set(struct rte_eth_dev *dev,
+ enum rte_vlan_type vlan_type,
+ uint16_t tpid)
{
struct e1000_hw *hw =
E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- uint32_t reg = ETHER_TYPE_VLAN ;
+ uint32_t reg = ETHER_TYPE_VLAN;
- reg |= (tpid << 16);
- E1000_WRITE_REG(hw, E1000_VET, reg);
+ switch (vlan_type) {
+ case ETH_VLAN_TYPE_INNER:
+ reg |= (tpid << 16);
+ E1000_WRITE_REG(hw, E1000_VET, reg);
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Unsupported vlan type %d\n", vlan_type);
+ break;
+ }
}
static void
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 0c87ec1..e3fc0bc 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -266,6 +266,11 @@
#define I40E_INSET_IPV6_TC_MASK 0x0009F00FUL
#define I40E_INSET_IPV6_NEXT_HDR_MASK 0x000C00FFUL
+#define I40E_GL_SWT_L2TAGCTRL(_i) (0x001C0A70 + ((_i) * 4))
+#define I40E_GL_SWT_L2TAGCTRL_ETHERTYPE_SHIFT 16
+#define I40E_GL_SWT_L2TAGCTRL_ETHERTYPE_MASK \
+ I40E_MASK(0xFFFF, I40E_GL_SWT_L2TAGCTRL_ETHERTYPE_SHIFT)
+
static int eth_i40e_dev_init(struct rte_eth_dev *eth_dev);
static int eth_i40e_dev_uninit(struct rte_eth_dev *eth_dev);
static int i40e_dev_configure(struct rte_eth_dev *dev);
@@ -292,7 +297,9 @@ static void i40e_dev_info_get(struct rte_eth_dev *dev,
static int i40e_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id,
int on);
-static void i40e_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid);
+static void i40e_vlan_tpid_set(struct rte_eth_dev *dev,
+ enum rte_vlan_type vlan_type,
+ uint16_t tpid);
static void i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask);
static void i40e_vlan_strip_queue_set(struct rte_eth_dev *dev,
uint16_t queue,
@@ -2313,10 +2320,52 @@ i40e_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
}
static void
-i40e_vlan_tpid_set(__rte_unused struct rte_eth_dev *dev,
- __rte_unused uint16_t tpid)
+i40e_vlan_tpid_set(struct rte_eth_dev *dev,
+ enum rte_vlan_type vlan_type,
+ uint16_t tpid)
{
- PMD_INIT_FUNC_TRACE();
+ struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ uint64_t reg_r = 0, reg_w = 0;
+ uint16_t reg_id = 0;
+ int ret;
+
+ switch (vlan_type) {
+ case ETH_VLAN_TYPE_OUTER:
+ reg_id = 2;
+ break;
+ case ETH_VLAN_TYPE_INNER:
+ reg_id = 3;
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Unsupported vlan type %d", vlan_type);
+ return;
+ }
+ ret = i40e_aq_debug_read_register(hw, I40E_GL_SWT_L2TAGCTRL(reg_id),
+ ®_r, NULL);
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(ERR, "Fail to debug read from "
+ "I40E_GL_SWT_L2TAGCTRL[%d]", reg_id);
+ return;
+ }
+ PMD_DRV_LOG(DEBUG, "Debug read from I40E_GL_SWT_L2TAGCTRL[%d]: "
+ "0x%08"PRIx64"", reg_id, reg_r);
+
+ reg_w = reg_r & (~(I40E_GL_SWT_L2TAGCTRL_ETHERTYPE_MASK));
+ reg_w |= ((uint64_t)tpid << I40E_GL_SWT_L2TAGCTRL_ETHERTYPE_SHIFT);
+ if (reg_r == reg_w) {
+ PMD_DRV_LOG(DEBUG, "No need to write");
+ return;
+ }
+
+ ret = i40e_aq_debug_write_register(hw, I40E_GL_SWT_L2TAGCTRL(reg_id),
+ reg_w, NULL);
+ if (ret != I40E_SUCCESS) {
+ PMD_DRV_LOG(ERR, "Fail to debug write to "
+ "I40E_GL_SWT_L2TAGCTRL[%d]", reg_id);
+ return;
+ }
+ PMD_DRV_LOG(DEBUG, "Debug write 0x%08"PRIx64" to "
+ "I40E_GL_SWT_L2TAGCTRL[%d]", reg_w, reg_id);
}
static void
@@ -7332,11 +7381,17 @@ i40e_dev_filter_ctrl(struct rte_eth_dev *dev,
static void
i40e_hw_init(struct i40e_hw *hw)
{
+ struct rte_eth_dev *dev = ((struct i40e_adapter *)(hw->back))->eth_dev;
+
/* clear the PF Queue Filter control register */
i40e_write_rx_ctl(hw, I40E_PFQF_CTL_0, 0);
/* Disable symmetric hash per port */
i40e_set_symmetric_hash_enable_per_port(hw, 0);
+
+ /* Set the global registers with default ether type value */
+ i40e_vlan_tpid_set(dev, ETH_VLAN_TYPE_OUTER, ETHER_TYPE_VLAN);
+ i40e_vlan_tpid_set(dev, ETH_VLAN_TYPE_INNER, ETHER_TYPE_VLAN);
}
enum i40e_filter_pctype
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index a9a1583..ce3ce9f 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -178,7 +178,9 @@ static int ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
static int ixgbe_vlan_filter_set(struct rte_eth_dev *dev,
uint16_t vlan_id, int on);
-static void ixgbe_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid_id);
+static void ixgbe_vlan_tpid_set(struct rte_eth_dev *dev,
+ enum rte_vlan_type vlan_type,
+ uint16_t tpid_id);
static void ixgbe_vlan_hw_strip_bitmap_set(struct rte_eth_dev *dev,
uint16_t queue, bool on);
static void ixgbe_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue,
@@ -1543,13 +1545,22 @@ ixgbe_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
}
static void
-ixgbe_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid)
+ixgbe_vlan_tpid_set(struct rte_eth_dev *dev,
+ enum rte_vlan_type vlan_type,
+ uint16_t tpid)
{
struct ixgbe_hw *hw =
IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- /* Only the high 16-bits is valid */
- IXGBE_WRITE_REG(hw, IXGBE_EXVET, tpid << 16);
+ switch (vlan_type) {
+ case ETH_VLAN_TYPE_INNER:
+ /* Only the high 16-bits is valid */
+ IXGBE_WRITE_REG(hw, IXGBE_EXVET, tpid << 16);
+ break;
+ default:
+ PMD_DRV_LOG(ERR, "Unsupported vlan type %d\n", vlan_type);
+ break;
+ }
}
void
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index a6e83c1..bb0c3eb 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -65,6 +65,7 @@
#include <rte_errno.h>
#include <rte_spinlock.h>
#include <rte_string_fns.h>
+#include <rte_compat.h>
#include "rte_ether.h"
#include "rte_ethdev.h"
@@ -1697,17 +1698,37 @@ rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id, int o
}
int
-rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tpid)
+rte_eth_dev_set_vlan_ether_type_v22(uint8_t port_id, uint16_t tpid)
{
struct rte_eth_dev *dev;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
dev = &rte_eth_devices[port_id];
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_tpid_set, -ENOTSUP);
- (*dev->dev_ops->vlan_tpid_set)(dev, tpid);
+ (*dev->dev_ops->vlan_tpid_set)(dev, ETH_VLAN_TYPE_INNER, tpid);
return 0;
}
+VERSION_SYMBOL(rte_eth_dev_set_vlan_ether_type, _v22, 2.2);
+
+int
+rte_eth_dev_set_vlan_ether_type_v1604(uint8_t port_id,
+ enum rte_vlan_type vlan_type,
+ uint16_t tpid)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_tpid_set, -ENOTSUP);
+ (*dev->dev_ops->vlan_tpid_set)(dev, vlan_type, tpid);
+
+ return 0;
+}
+BIND_DEFAULT_SYMBOL(rte_eth_dev_set_vlan_ether_type, _v1604, 16.04);
+MAP_STATIC_SYMBOL(int rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+ enum rte_vlan_type vlan_type, uint16_t tpid),
+ rte_eth_dev_set_vlan_ether_type_v1604);
int
rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index e2893ba..21db144 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -351,6 +351,17 @@ struct rte_eth_rxmode {
};
/**
+ * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN.
+ * Note that single VLAN is treated the same as inner VLAN.
+ */
+enum rte_vlan_type {
+ ETH_VLAN_TYPE_UNKNOWN = 0,
+ ETH_VLAN_TYPE_INNER, /**< Single VLAN, or inner VLAN. */
+ ETH_VLAN_TYPE_OUTER, /**< Outer VLAN. */
+ ETH_VLAN_TYPE_MAX,
+};
+
+/**
* A structure used to configure the Receive Side Scaling (RSS) feature
* of an Ethernet port.
* If not NULL, the *rss_key* pointer of the *rss_conf* structure points
@@ -1077,7 +1088,7 @@ typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
/**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */
typedef void (*vlan_tpid_set_t)(struct rte_eth_dev *dev,
- uint16_t tpid);
+ enum rte_vlan_type type, uint16_t tpid);
/**< @internal set the outer VLAN-TPID by an Ethernet device. */
typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
@@ -2346,6 +2357,8 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
*
* @param port_id
* The port identifier of the Ethernet device.
+ * @vlan_type
+ * The vlan type.
* @param tag_type
* The Tag Protocol ID
* @return
@@ -2353,7 +2366,13 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
* - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tag_type);
+int rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+ enum rte_vlan_type vlan_type,
+ uint16_t tag_type);
+int rte_eth_dev_set_vlan_ether_type_v22(uint8_t port_id, uint16_t tag_type);
+int rte_eth_dev_set_vlan_ether_type_v1604(uint8_t port_id,
+ enum rte_vlan_type vlan_type,
+ uint16_t tag_type);
/**
* Set VLAN offload configuration on an Ethernet device
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index d8db24d..6098de5 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -117,3 +117,10 @@ DPDK_2.2 {
local: *;
};
+
+DPDK_16.04 {
+ global:
+
+ rte_eth_dev_set_vlan_ether_type;
+
+} DPDK_2.2;
--
2.5.0
next prev parent reply other threads:[~2016-03-11 8:49 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-22 1:37 [dpdk-dev] [PATCH 0/2] i40e setting ether type of VLANs Helin Zhang
2016-01-22 1:37 ` [dpdk-dev] [PATCH 1/2] ethdev: add vlan type for setting ether type Helin Zhang
2016-01-22 1:37 ` [dpdk-dev] [PATCH 2/2] i40e: add VLAN ether type config Helin Zhang
2016-03-07 8:12 ` [dpdk-dev] [PATCH v2 0/3] i40e setting ether type of VLANs Helin Zhang
2016-03-07 8:12 ` [dpdk-dev] [PATCH v2 1/3] ethdev: add vlan type for setting ether type Helin Zhang
2016-03-07 8:12 ` [dpdk-dev] [PATCH v2 2/3] i40e: add VLAN ether type config Helin Zhang
2016-03-07 8:12 ` [dpdk-dev] [PATCH v2 3/3] i40e: fix the overflow issue Helin Zhang
2016-03-07 9:28 ` [dpdk-dev] [PATCH v2 0/3] i40e setting ether type of VLANs Thomas Monjalon
2016-03-09 15:20 ` Zhang, Helin
2016-03-10 16:36 ` [dpdk-dev] [PATCH v3 0/2] " Helin Zhang
2016-03-10 16:36 ` [dpdk-dev] [PATCH v3 1/2] ethdev: add vlan type for setting ether type Helin Zhang
2016-03-10 16:36 ` [dpdk-dev] [PATCH v3 2/2] i40e: fix the overflow issue Helin Zhang
2016-03-11 2:36 ` [dpdk-dev] [PATCH v3 0/2] i40e setting ether type of VLANs Lu, Wenzhuo
2016-03-11 8:49 ` [dpdk-dev] [PATCH v4 " Helin Zhang
2016-03-11 8:49 ` Helin Zhang [this message]
2016-03-11 11:19 ` [dpdk-dev] [PATCH v4 1/2] ethdev: add vlan type for setting ether type Panu Matilainen
2016-03-11 11:20 ` Thomas Monjalon
2016-03-11 14:17 ` Zhang, Helin
2016-03-11 14:20 ` Thomas Monjalon
2016-03-11 8:49 ` [dpdk-dev] [PATCH v4 2/2] i40e: fix the overflow issue Helin Zhang
2016-03-11 16:50 ` [dpdk-dev] [PATCH v5 0/2] i40e setting ether type of VLANs Helin Zhang
2016-03-11 16:50 ` [dpdk-dev] [PATCH v5 1/2] ethdev: add vlan type for setting ether type Helin Zhang
2016-03-11 16:50 ` [dpdk-dev] [PATCH v5 2/2] i40e: fix the overflow issue Helin Zhang
2016-03-11 20:20 ` [dpdk-dev] [PATCH v5 0/2] i40e setting ether type of VLANs Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457686179-20435-2-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).