[dpdk-dev] [PATCH v2] i40e: fix ipv6 TSO issue for tx function

[Zhe Tao <zhe.tao@intel.com>]

Issue:
when using the following CLI in testpmd to enable ipv6 TSO feature
=============
set verbose 1
csum set ip hw 0
csum set udp hw 0
csum set tcp hw 0
csum set sctp hw 0
csum set outer-ip hw 0
csum parse_tunnel on 0
tso set 800 0
set fwd csum

start
=============

We will not get we want, the ipv6 packets sent out from IXIA can be received by
i40e, but cannot forward to another port.
The root cause is when HW doing the TSO offload for packets, it not only depends
on the context descriptor to define the MSS and TSO payload size, it also
need to know whether this packets is ipv4 or ipv6, ipv4 need the header csum,
but ipv6 doesn't need the csum. We need to use the i40e_txd_enable_checksum to
set the ipv6 type flag into the data descriptor when the packets are for
ipv6 TSO.  
 
Fixes: e3f0151f (i40e: enable Tx checksum only for offloaded packets)

Signed-off-by: Zhe Tao <zhe.tao@intel.com>
---
v2: change condition check for ipv6 TSO checksum offload
    use a more clear check method which include both ipv4 & ipv6 TSO


 drivers/net/i40e/i40e_rxtx.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/i40e/i40e_rxtx.c b/drivers/net/i40e/i40e_rxtx.c
index 1488f2f..3422ec2 100644
--- a/drivers/net/i40e/i40e_rxtx.c
+++ b/drivers/net/i40e/i40e_rxtx.c
@@ -73,9 +73,16 @@
 
 #define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
 
+/* need to add the TSO flag to the checksum offload mask
+ * even the packets like ipv6 doesn't need the checksum for ip header
+ * but the FW need to know whether this TCP packets is ipv4 or ipv6,
+ * so add this kind of information in the checksum offload field in the
+ * normal data descriptor.
+ */
 #define I40E_TX_CKSUM_OFFLOAD_MASK (		 \
 		PKT_TX_IP_CKSUM |		 \
 		PKT_TX_L4_MASK |		 \
+		PKT_TX_TCP_SEG |		 \
 		PKT_TX_OUTER_IP_CKSUM)
 
 static uint16_t i40e_xmit_pkts_simple(void *tx_queue,
-- 
2.1.4