From: Jingjing Wu <jingjing.wu@intel.com>
To: bruce.richardson@intel.com
Cc: dev@dpdk.org, jingjing.wu@intel.com, helin.zhang@intel.com
Subject: [dpdk-dev] [PATCH v6 3/9] i40e: remove flex payload from input selection
Date: Wed, 23 Mar 2016 21:07:06 +0800 [thread overview]
Message-ID: <1458738432-3184-4-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1458738432-3184-1-git-send-email-jingjing.wu@intel.com>
In this patch, flex payload is removed from valid fdir input set
values. It is because all flex payload configuration can be set
in struct rte_fdir_conf during device configure phase, which is
a more flexible way of setting this up.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 59 +++++++++++++++++++-----------------------
1 file changed, 26 insertions(+), 33 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 2867e60..5c549f7 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -254,7 +254,8 @@
#define I40E_REG_INSET_FLEX_PAYLOAD_WORD7 0x0000000000000080ULL
/* 8th word of flex payload */
#define I40E_REG_INSET_FLEX_PAYLOAD_WORD8 0x0000000000000040ULL
-
+/* all 8 words flex payload */
+#define I40E_REG_INSET_FLEX_PAYLOAD_WORDS 0x0000000000003FC0ULL
#define I40E_REG_INSET_MASK_DEFAULT 0x0000000000000000ULL
#define I40E_TRANSLATE_INSET 0
@@ -6755,43 +6756,32 @@ i40e_get_valid_input_set(enum i40e_filter_pctype pctype,
*/
static const uint64_t valid_fdir_inset_table[] = {
[I40E_FILTER_PCTYPE_FRAG_IPV4] =
- I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST,
[I40E_FILTER_PCTYPE_NONF_IPV4_UDP] =
I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
- I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT,
[I40E_FILTER_PCTYPE_NONF_IPV4_TCP] =
- I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
- I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST,
[I40E_FILTER_PCTYPE_NONF_IPV4_SCTP] =
I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT |
- I40E_INSET_SCTP_VT | I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_SCTP_VT,
[I40E_FILTER_PCTYPE_NONF_IPV4_OTHER] =
- I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_IPV4_SRC | I40E_INSET_IPV4_DST,
[I40E_FILTER_PCTYPE_FRAG_IPV6] =
- I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST,
[I40E_FILTER_PCTYPE_NONF_IPV6_UDP] =
- I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST |
- I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST,
[I40E_FILTER_PCTYPE_NONF_IPV6_TCP] =
- I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST |
- I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST,
[I40E_FILTER_PCTYPE_NONF_IPV6_SCTP] =
I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST |
I40E_INSET_SRC_PORT | I40E_INSET_DST_PORT |
- I40E_INSET_SCTP_VT | I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_SCTP_VT,
[I40E_FILTER_PCTYPE_NONF_IPV6_OTHER] =
- I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST |
- I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_IPV6_SRC | I40E_INSET_IPV6_DST,
[I40E_FILTER_PCTYPE_L2_PAYLOAD] =
- I40E_INSET_LAST_ETHER_TYPE | I40E_INSET_FLEX_PAYLOAD,
+ I40E_INSET_LAST_ETHER_TYPE,
};
if (pctype > I40E_FILTER_PCTYPE_L2_PAYLOAD)
@@ -7019,7 +7009,7 @@ i40e_translate_input_set_reg(uint64_t input)
return val;
}
-static uint8_t
+static int
i40e_generate_inset_mask_reg(uint64_t inset, uint32_t *mask, uint8_t nb_elem)
{
uint8_t i, idx = 0;
@@ -7037,16 +7027,13 @@ i40e_generate_inset_mask_reg(uint64_t inset, uint32_t *mask, uint8_t nb_elem)
if (!inset || !mask || !nb_elem)
return 0;
- if (!inset && nb_elem >= I40E_INSET_MASK_NUM_REG) {
- for (i = 0; i < I40E_INSET_MASK_NUM_REG; i++)
- mask[i] = 0;
- return I40E_INSET_MASK_NUM_REG;
- }
for (i = 0, idx = 0; i < RTE_DIM(inset_mask_map); i++) {
- if (idx >= nb_elem)
- break;
- if (inset & inset_mask_map[i].inset) {
+ if ((inset & inset_mask_map[i].inset) == inset_mask_map[i].inset) {
+ if (idx >= nb_elem) {
+ PMD_DRV_LOG(ERR, "exceed maximal number of bitmasks");
+ return -EINVAL;
+ }
mask[idx] = inset_mask_map[i].mask;
idx++;
}
@@ -7181,7 +7168,13 @@ i40e_fdir_filter_inset_select(struct i40e_pf *pf,
inset_reg <<= I40E_32_BIT_WIDTH;
inset_reg |= i40e_read_rx_ctl(hw, I40E_PRTQF_FD_INSET(pctype, 0));
- if (conf->op == RTE_ETH_INPUT_SET_ADD)
+ /* Can not change the inset reg for flex payload for fdir,
+ * it is done by writing I40E_PRTQF_FD_FLXINSET
+ * in i40e_set_flex_mask_on_pctype.
+ */
+ if (conf->op == RTE_ETH_INPUT_SET_SELECT)
+ inset_reg &= I40E_REG_INSET_FLEX_PAYLOAD_WORDS;
+ else
input_set |= pf->fdir.input_set[pctype];
num = i40e_generate_inset_mask_reg(input_set, mask_reg,
I40E_INSET_MASK_NUM_REG);
--
2.4.0
next prev parent reply other threads:[~2016-03-23 13:09 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-25 8:29 [dpdk-dev] [PATCH 0/4] extend flow director's IP fields in i40e driver Jingjing Wu
2015-12-25 8:29 ` [dpdk-dev] [PATCH 1/4] ethdev: extend flow director to support input set selection Jingjing Wu
2015-12-25 8:29 ` [dpdk-dev] [PATCH 2/4] i40e: split function for input set change of hash and fdir Jingjing Wu
2016-01-20 20:04 ` Chilikin, Andrey
2016-01-21 1:28 ` Wu, Jingjing
2016-01-21 20:06 ` Chilikin, Andrey
2016-01-26 1:12 ` Wu, Jingjing
2015-12-25 8:29 ` [dpdk-dev] [PATCH 3/4] i40e: extend flow director to filter by more IP Header fields Jingjing Wu
2015-12-25 8:30 ` [dpdk-dev] [PATCH 4/4] testpmd: extend commands for filter's input set changing Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 00/12] extend flow director's fields in i40e driver Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 01/12] ethdev: extend flow director to support input set selection Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 02/12] i40e: split function for input set change of hash and fdir Jingjing Wu
2016-02-25 8:51 ` Zhang, Helin
2016-02-26 0:32 ` Wu, Jingjing
2016-01-26 6:26 ` [dpdk-dev] [PATCH 03/12] i40e: remove flex payload from INPUT_SET_SELECT operation Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 04/12] i40e: restore default setting on input set of filters Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 05/12] i40e: extend flow director to filter by more IP Header fields Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 06/12] testpmd: extend commands for filter's input set changing Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 07/12] librte_ether: extend rte_eth_fdir_flow to support tunnel format Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 08/12] i40e: extend flow director to filter by tunnel ID Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 09/12] testpmd: extend commands for fdir's tunnel id input set Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 10/12] i40e: fix VLAN bitmasks for hash/fdir input sets for tunnels Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 11/12] i40e: extend flow director to filter by vlan id Jingjing Wu
2016-01-26 6:26 ` [dpdk-dev] [PATCH 12/12] testpmd: extend commands for fdir's vlan input set Jingjing Wu
2016-02-24 11:44 ` [dpdk-dev] [PATCH 00/12] extend flow director's fields in i40e driver Bruce Richardson
2016-02-25 7:42 ` Zhang, Helin
2016-03-02 11:29 ` [dpdk-dev] [PATCH v2 " Jingjing Wu
2016-03-02 11:29 ` [dpdk-dev] [PATCH v2 01/12] ethdev: extend flow director to support input set selection Jingjing Wu
2016-03-02 11:29 ` [dpdk-dev] [PATCH v2 02/12] i40e: split function for input set change of hash and fdir Jingjing Wu
2016-03-02 11:29 ` [dpdk-dev] [PATCH v2 03/12] i40e: remove flex payload from INPUT_SET_SELECT operation Jingjing Wu
2016-03-02 11:29 ` [dpdk-dev] [PATCH v2 04/12] i40e: restore default setting on input set of filters Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 05/12] i40e: extend flow director to filter by more IP Header fields Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 06/12] testpmd: extend commands for filter's input set changing Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 07/12] librte_ether: extend rte_eth_fdir_flow to support tunnel format Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 08/12] i40e: extend flow director to filter by tunnel ID Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 09/12] testpmd: extend commands for fdir's tunnel id input set Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 10/12] i40e: fix VLAN bitmasks for hash/fdir input sets for tunnels Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 11/12] i40e: extend flow director to filter by vlan id Jingjing Wu
2016-03-02 11:30 ` [dpdk-dev] [PATCH v2 12/12] testpmd: extend commands for fdir's vlan input set Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 00/12] extend flow director fields in i40e driver Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 01/12] ethdev: extend flow director for input selection Jingjing Wu
2016-03-09 9:52 ` Thomas Monjalon
2016-03-09 9:56 ` Thomas Monjalon
2016-03-09 9:54 ` Thomas Monjalon
2016-03-09 10:26 ` Wu, Jingjing
2016-03-09 10:36 ` Thomas Monjalon
2016-03-09 11:22 ` Wu, Jingjing
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 02/12] i40e: split function for hash and fdir input Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 03/12] i40e: remove flex payload from input selection Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 04/12] i40e: restore default setting on input set Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 05/12] i40e: extend flow director to filter by IP Header Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 06/12] testpmd: extend input set related commands Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 07/12] librte_ether: extend flow director struct Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 08/12] i40e: extend flow director to filter by tunnel ID Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 09/12] testpmd: extend flow director commands Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 10/12] i40e: fix VLAN bitmasks for input set Jingjing Wu
2016-03-09 5:42 ` [dpdk-dev] [PATCH v3 11/12] i40e: extend flow director to filter by vlan id Jingjing Wu
2016-03-09 5:43 ` [dpdk-dev] [PATCH v3 12/12] testpmd: extend flow director commands Jingjing Wu
2016-03-09 6:18 ` [dpdk-dev] [PATCH v3 00/12] extend flow director fields in i40e driver Zhang, Helin
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 " Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 01/12] ethdev: extend flow director for input selection Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 02/12] i40e: split function for hash and fdir input Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 03/12] i40e: remove flex payload from input selection Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 04/12] i40e: restore default setting on input set Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 05/12] i40e: extend flow director to filter by IP Header Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 06/12] testpmd: extend input set related commands Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 07/12] librte_ether: extend flow director struct Jingjing Wu
2016-03-18 11:44 ` Thomas Monjalon
2016-03-20 8:56 ` Wu, Jingjing
2016-03-20 9:02 ` Wu, Jingjing
2016-03-20 10:38 ` Thomas Monjalon
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 08/12] i40e: extend flow director to filter by tunnel ID Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 09/12] testpmd: extend flow director commands Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 10/12] i40e: fix VLAN bitmasks for input set Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 11/12] i40e: extend flow director to filter by vlan id Jingjing Wu
2016-03-10 3:25 ` [dpdk-dev] [PATCH v4 12/12] testpmd: extend flow director commands Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 0/9] extend flow director fields in i40e driver Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 1/9] ethdev: extend flow director for input selection Jingjing Wu
2016-03-22 22:05 ` Thomas Monjalon
2016-03-23 0:42 ` Wu, Jingjing
2016-03-23 8:45 ` Thomas Monjalon
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 2/9] i40e: split function for hash and fdir input Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 3/9] i40e: remove flex payload from input selection Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 4/9] i40e: restore default setting on input set Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 5/9] i40e: extend flow director to filter by IP Header Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 6/9] testpmd: extend input set related commands Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 7/9] i40e: fix VLAN bitmasks for input set Jingjing Wu
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 8/9] i40e: extend flow director to filter by vlan id Jingjing Wu
2016-03-21 6:48 ` Zhang, Helin
2016-03-21 6:18 ` [dpdk-dev] [PATCH v5 9/9] testpmd: extend flow director commands Jingjing Wu
2016-03-21 6:48 ` Zhang, Helin
2016-03-22 21:51 ` [dpdk-dev] [PATCH v5 0/9] extend flow director fields in i40e driver Bruce Richardson
2016-03-22 21:56 ` Thomas Monjalon
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 " Jingjing Wu
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 1/9] ethdev: extend flow director for input selection Jingjing Wu
2016-03-23 14:02 ` Thomas Monjalon
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 2/9] i40e: split function for hash and fdir input Jingjing Wu
2016-03-23 13:07 ` Jingjing Wu [this message]
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 4/9] i40e: use default filter input set on init Jingjing Wu
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 5/9] i40e: allow filtering on more IP Header fields Jingjing Wu
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 6/9] testpmd: extend input set related commands Jingjing Wu
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 7/9] i40e: fix VLAN bitmasks for input set Jingjing Wu
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 8/9] i40e: extend flow director to filter by vlan id Jingjing Wu
2016-03-23 13:07 ` [dpdk-dev] [PATCH v6 9/9] testpmd: allow vlan as part of fdir input set Jingjing Wu
2016-03-23 14:46 ` [dpdk-dev] [PATCH v6 0/9] extend flow director fields in i40e driver Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458738432-3184-4-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=helin.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).