From: Jianfeng Tan <jianfeng.tan@intel.com>
To: dev@dpdk.org
Cc: huawei.xie@intel.com, yuanhan.liu@linux.intel.com,
david.marchand@6wind.com, Jianfeng Tan <jianfeng.tan@intel.com>
Subject: [dpdk-dev] [PATCH v2] virtio: fix modify drv_flags for specific device
Date: Thu, 28 Apr 2016 18:08:59 +0000 [thread overview]
Message-ID: <1461866939-38689-1-git-send-email-jianfeng.tan@intel.com> (raw)
In-Reply-To: <1461637474-110602-1-git-send-email-jianfeng.tan@intel.com>
Issue: virtio's drv_flags are decided by devices types (modern vs legacy),
and which kernel driver is used, and the negotiated features (especially
VIRTIO_NET_STATUS) with backend, which makes it possible to multiple
virtio devices have different versions of drv_flags, but this variable
is currently shared by each virtio device.
How to fix: dev_flags is a device-specific variable to store this info.
Fixes: da978dfdc43 ("virtio: use port IO to get PCI resource")
Reported-by: David Marchand <david.marchand@6wind.com>
Suggested-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
---
v2: RTE_PCI_DRV_INTR_LSC -> RTE_ETH_DEV_INTR_LSC.
drivers/net/virtio/virtio_ethdev.c | 25 ++++++++++++++-----------
drivers/net/virtio/virtio_pci.c | 13 +++++++------
drivers/net/virtio/virtio_pci.h | 3 ++-
3 files changed, 23 insertions(+), 18 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 63a368a..1fe90ae 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -59,7 +59,6 @@
#include "virtqueue.h"
#include "virtio_rxtx.h"
-
static int eth_virtio_dev_init(struct rte_eth_dev *eth_dev);
static int eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev);
static int virtio_dev_configure(struct rte_eth_dev *dev);
@@ -491,7 +490,6 @@ static void
virtio_dev_close(struct rte_eth_dev *dev)
{
struct virtio_hw *hw = dev->data->dev_private;
- struct rte_pci_device *pci_dev = dev->pci_dev;
PMD_INIT_LOG(DEBUG, "virtio_dev_close");
@@ -499,7 +497,7 @@ virtio_dev_close(struct rte_eth_dev *dev)
virtio_dev_stop(dev);
/* reset the NIC */
- if (pci_dev->driver->drv_flags & RTE_PCI_DRV_INTR_LSC)
+ if (dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
vtpci_irq_config(hw, VIRTIO_MSI_NO_VECTOR);
vtpci_reset(hw);
virtio_dev_free_mbufs(dev);
@@ -1034,6 +1032,7 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
struct virtio_net_config *config;
struct virtio_net_config local_config;
struct rte_pci_device *pci_dev;
+ uint32_t dev_flags = RTE_ETH_DEV_DETACHABLE;
int ret;
RTE_BUILD_BUG_ON(RTE_PKTMBUF_HEADROOM < sizeof(struct virtio_net_hdr));
@@ -1057,7 +1056,7 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
pci_dev = eth_dev->pci_dev;
- ret = vtpci_init(pci_dev, hw);
+ ret = vtpci_init(pci_dev, hw, &dev_flags);
if (ret)
return ret;
@@ -1074,9 +1073,15 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
/* If host does not support status then disable LSC */
if (!vtpci_with_feature(hw, VIRTIO_NET_F_STATUS))
- pci_dev->driver->drv_flags &= ~RTE_PCI_DRV_INTR_LSC;
+ dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
rte_eth_copy_pci_info(eth_dev, pci_dev);
+ /* For virtio devices, dev_flags are decided according to feature
+ * negotiation, aka if VIRTIO_NET_F_STATUS is set, and which kernel
+ * driver is used, dynamically. And we should keep drv_flags shared
+ * and unvaried.
+ */
+ eth_dev->data->dev_flags = dev_flags;
rx_func_get(eth_dev);
@@ -1155,7 +1160,7 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
pci_dev->id.device_id);
/* Setup interrupt callback */
- if (pci_dev->driver->drv_flags & RTE_PCI_DRV_INTR_LSC)
+ if (eth_dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
rte_intr_callback_register(&pci_dev->intr_handle,
virtio_interrupt_handler, eth_dev);
@@ -1190,7 +1195,7 @@ eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev)
eth_dev->data->mac_addrs = NULL;
/* reset interrupt callback */
- if (pci_dev->driver->drv_flags & RTE_PCI_DRV_INTR_LSC)
+ if (eth_dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
rte_intr_callback_unregister(&pci_dev->intr_handle,
virtio_interrupt_handler,
eth_dev);
@@ -1240,7 +1245,6 @@ virtio_dev_configure(struct rte_eth_dev *dev)
{
const struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode;
struct virtio_hw *hw = dev->data->dev_private;
- struct rte_pci_device *pci_dev = dev->pci_dev;
PMD_INIT_LOG(DEBUG, "configure");
@@ -1258,7 +1262,7 @@ virtio_dev_configure(struct rte_eth_dev *dev)
return -ENOTSUP;
}
- if (pci_dev->driver->drv_flags & RTE_PCI_DRV_INTR_LSC)
+ if (dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
if (vtpci_irq_config(hw, 0) == VIRTIO_MSI_NO_VECTOR) {
PMD_DRV_LOG(ERR, "failed to set config vector");
return -EBUSY;
@@ -1273,11 +1277,10 @@ virtio_dev_start(struct rte_eth_dev *dev)
{
uint16_t nb_queues, i;
struct virtio_hw *hw = dev->data->dev_private;
- struct rte_pci_device *pci_dev = dev->pci_dev;
/* check if lsc interrupt feature is enabled */
if (dev->data->dev_conf.intr_conf.lsc) {
- if (!(pci_dev->driver->drv_flags & RTE_PCI_DRV_INTR_LSC)) {
+ if (!(dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)) {
PMD_DRV_LOG(ERR, "link status not supported by host");
return -ENOTSUP;
}
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index c007959..9cdca06 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -199,15 +199,15 @@ legacy_virtio_has_msix(const struct rte_pci_addr *loc __rte_unused)
static int
legacy_virtio_resource_init(struct rte_pci_device *pci_dev,
- struct virtio_hw *hw)
+ struct virtio_hw *hw, uint32_t *dev_flags)
{
if (rte_eal_pci_ioport_map(pci_dev, 0, &hw->io) < 0)
return -1;
if (pci_dev->intr_handle.type != RTE_INTR_HANDLE_UNKNOWN)
- pci_dev->driver->drv_flags |= RTE_PCI_DRV_INTR_LSC;
+ *dev_flags |= RTE_ETH_DEV_INTR_LSC;
else
- pci_dev->driver->drv_flags &= ~RTE_PCI_DRV_INTR_LSC;
+ *dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
return 0;
}
@@ -630,7 +630,8 @@ next:
* Return 0 on success.
*/
int
-vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
+vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw,
+ uint32_t *dev_flags)
{
hw->dev = dev;
@@ -643,12 +644,12 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
PMD_INIT_LOG(INFO, "modern virtio pci detected.");
hw->vtpci_ops = &modern_ops;
hw->modern = 1;
- dev->driver->drv_flags |= RTE_PCI_DRV_INTR_LSC;
+ *dev_flags |= RTE_ETH_DEV_INTR_LSC;
return 0;
}
PMD_INIT_LOG(INFO, "trying with legacy virtio pci.");
- if (legacy_virtio_resource_init(dev, hw) < 0) {
+ if (legacy_virtio_resource_init(dev, hw, dev_flags) < 0) {
if (dev->kdrv == RTE_KDRV_UNKNOWN &&
dev->devargs->type != RTE_DEVTYPE_WHITELISTED_PCI) {
PMD_INIT_LOG(INFO,
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index b69785e..554efea 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -293,7 +293,8 @@ vtpci_with_feature(struct virtio_hw *hw, uint64_t bit)
/*
* Function declaration from virtio_pci.c
*/
-int vtpci_init(struct rte_pci_device *, struct virtio_hw *);
+int vtpci_init(struct rte_pci_device *, struct virtio_hw *,
+ uint32_t *dev_flags);
void vtpci_reset(struct virtio_hw *);
void vtpci_reinit_complete(struct virtio_hw *);
--
2.1.4
next prev parent reply other threads:[~2016-04-28 18:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-26 2:24 [dpdk-dev] [PATCH] " Jianfeng Tan
2016-04-26 11:53 ` David Marchand
2016-04-27 5:10 ` Tan, Jianfeng
2016-04-27 5:20 ` David Marchand
2016-04-28 18:08 ` Jianfeng Tan [this message]
2016-05-02 17:55 ` [dpdk-dev] [PATCH v2] " Yuanhan Liu
2016-05-03 8:05 ` David Marchand
2016-05-04 23:18 ` Yuanhan Liu
2016-05-09 9:14 ` Tan, Jianfeng
2016-05-09 18:01 ` Yuanhan Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461866939-38689-1-git-send-email-jianfeng.tan@intel.com \
--to=jianfeng.tan@intel.com \
--cc=david.marchand@6wind.com \
--cc=dev@dpdk.org \
--cc=huawei.xie@intel.com \
--cc=yuanhan.liu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).