DPDK patches and discussions
 help / color / mirror / Atom feed
From: Zhihong Wang <zhihong.wang@intel.com>
To: dev@dpdk.org
Cc: konstantin.ananyev@intel.com, bruce.richardson@intel.com,
	thomas.monjalon@6wind.com, Zhihong Wang <zhihong.wang@intel.com>
Subject: [dpdk-dev] [PATCH 1/6] testpmd: add io_retry forwarding
Date: Thu,  5 May 2016 18:46:56 -0400	[thread overview]
Message-ID: <1462488421-118990-2-git-send-email-zhihong.wang@intel.com> (raw)
In-Reply-To: <1462488421-118990-1-git-send-email-zhihong.wang@intel.com>

This patch adds an io_retry-fwd in testpmd to prevent most packet
losses. It can be enabled by "set fwd io_retry".

io-fwd is the fastest possible forwarding engine, good for basic
performance test. Adding retry mechanism expands test case coverage
to support scenarios where packet loss affects test results.


Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
---
 app/test-pmd/Makefile      |   1 +
 app/test-pmd/iofwd-retry.c | 139 +++++++++++++++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.c     |   1 +
 app/test-pmd/testpmd.h     |   1 +
 4 files changed, 142 insertions(+)
 create mode 100644 app/test-pmd/iofwd-retry.c

diff --git a/app/test-pmd/Makefile b/app/test-pmd/Makefile
index 72426f3..a6735cf 100644
--- a/app/test-pmd/Makefile
+++ b/app/test-pmd/Makefile
@@ -49,6 +49,7 @@ SRCS-y += parameters.c
 SRCS-$(CONFIG_RTE_LIBRTE_CMDLINE) += cmdline.c
 SRCS-y += config.c
 SRCS-y += iofwd.c
+SRCS-y += iofwd-retry.c
 SRCS-y += macfwd.c
 SRCS-y += macfwd-retry.c
 SRCS-y += macswap.c
diff --git a/app/test-pmd/iofwd-retry.c b/app/test-pmd/iofwd-retry.c
new file mode 100644
index 0000000..14c5660
--- /dev/null
+++ b/app/test-pmd/iofwd-retry.c
@@ -0,0 +1,139 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <inttypes.h>
+
+#include <sys/queue.h>
+#include <sys/stat.h>
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_cycles.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_ring.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_string_fns.h>
+
+#include "testpmd.h"
+
+#define TX_RETRY_TIMES 128
+#define TX_RETRY_WAIT_US 1
+
+/*
+ * I/O retry forwarding mode.
+ * Forward packets "as-is" without access to packet data.
+ */
+static void
+pkt_burst_io_retry_forward(struct fwd_stream *fs)
+{
+	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+	uint16_t nb_rx;
+	uint16_t nb_tx;
+	uint32_t retry;
+
+#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
+	uint64_t start_tsc;
+	uint64_t end_tsc;
+	uint64_t core_cycles;
+#endif
+
+#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
+	start_tsc = rte_rdtsc();
+#endif
+
+	nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue,
+			pkts_burst, nb_pkt_per_burst);
+	if (unlikely(nb_rx == 0))
+		return;
+	fs->rx_packets += nb_rx;
+
+#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
+	fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
+#endif
+
+	retry = 0;
+	nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue,
+			pkts_burst, nb_rx);
+	while (unlikely(nb_tx < nb_rx) && (retry++ < TX_RETRY_TIMES)) {
+		rte_delay_us(TX_RETRY_WAIT_US);
+		nb_tx += rte_eth_tx_burst(fs->tx_port, fs->tx_queue,
+				&pkts_burst[nb_tx], nb_rx - nb_tx);
+	}
+	fs->tx_packets += nb_tx;
+
+#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
+	fs->tx_burst_stats.pkt_burst_spread[nb_tx]++;
+#endif
+
+	if (unlikely(nb_tx < nb_rx)) {
+		fs->fwd_dropped += (nb_rx - nb_tx);
+		do {
+			rte_pktmbuf_free(pkts_burst[nb_tx]);
+		} while (++nb_tx < nb_rx);
+	}
+
+#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
+	end_tsc = rte_rdtsc();
+	core_cycles = (end_tsc - start_tsc);
+	fs->core_cycles = (uint64_t) (fs->core_cycles + core_cycles);
+#endif
+}
+
+struct fwd_engine io_retry_fwd_engine = {
+	.fwd_mode_name  = "io_retry",
+	.port_fwd_begin = NULL,
+	.port_fwd_end   = NULL,
+	.packet_fwd     = pkt_burst_io_retry_forward,
+};
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 26a174c..61abcf8 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -143,6 +143,7 @@ streamid_t nb_fwd_streams;       /**< Is equal to (nb_ports * nb_rxq). */
  */
 struct fwd_engine * fwd_engines[] = {
 	&io_fwd_engine,
+	&io_retry_fwd_engine,
 	&mac_fwd_engine,
 	&mac_retry_fwd_engine,
 	&mac_swap_engine,
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 0f72ca1..fbc18b0 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -221,6 +221,7 @@ struct fwd_engine {
 };
 
 extern struct fwd_engine io_fwd_engine;
+extern struct fwd_engine io_retry_fwd_engine;
 extern struct fwd_engine mac_fwd_engine;
 extern struct fwd_engine mac_retry_fwd_engine;
 extern struct fwd_engine mac_swap_engine;
-- 
2.5.0

  reply	other threads:[~2016-05-06  5:52 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-05 22:46 [dpdk-dev] [PATCH 0/6] vhost/virtio performance loopback utility Zhihong Wang
2016-05-05 22:46 ` Zhihong Wang [this message]
2016-05-25  9:32   ` [dpdk-dev] [PATCH 1/6] testpmd: add io_retry forwarding Thomas Monjalon
2016-05-26  2:40     ` Wang, Zhihong
2016-05-26  6:27       ` Thomas Monjalon
2016-05-26  9:24         ` Wang, Zhihong
2016-05-05 22:46 ` [dpdk-dev] [PATCH 2/6] testpmd: configurable tx_first burst number Zhihong Wang
2016-05-25  9:35   ` Thomas Monjalon
2016-05-26  2:53     ` Wang, Zhihong
2016-05-26  6:31       ` Thomas Monjalon
2016-05-26  9:31         ` Wang, Zhihong
2016-05-05 22:46 ` [dpdk-dev] [PATCH 3/6] testpmd: show throughput in port stats Zhihong Wang
2016-05-05 22:46 ` [dpdk-dev] [PATCH 4/6] testpmd: handle all rxqs in rss setup Zhihong Wang
2016-05-25  9:42   ` Thomas Monjalon
2016-05-26  2:55     ` Wang, Zhihong
2016-06-03  9:22       ` Wang, Zhihong
2016-05-05 22:47 ` [dpdk-dev] [PATCH 5/6] testpmd: show topology at forwarding start Zhihong Wang
2016-05-25  9:45   ` Thomas Monjalon
2016-05-26  2:56     ` Wang, Zhihong
2016-05-05 22:47 ` [dpdk-dev] [PATCH 6/6] testpmd: update documentation Zhihong Wang
2016-05-25  9:48   ` Thomas Monjalon
2016-05-26  2:54     ` Wang, Zhihong
2016-05-20  8:54 ` [dpdk-dev] [PATCH 0/6] vhost/virtio performance loopback utility Wang, Zhihong
2016-05-25  9:27 ` Thomas Monjalon
2016-06-01  3:27 ` [dpdk-dev] [PATCH v2 0/5] " Zhihong Wang
2016-06-01  3:27   ` [dpdk-dev] [PATCH v2 1/5] testpmd: add retry option Zhihong Wang
2016-06-07  9:28     ` De Lara Guarch, Pablo
2016-06-08  1:29       ` Wang, Zhihong
2016-06-01  3:27   ` [dpdk-dev] [PATCH v2 2/5] testpmd: configurable tx_first burst number Zhihong Wang
2016-06-07  9:43     ` De Lara Guarch, Pablo
2016-06-01  3:27   ` [dpdk-dev] [PATCH v2 3/5] testpmd: show throughput in port stats Zhihong Wang
2016-06-07 10:02     ` De Lara Guarch, Pablo
2016-06-08  1:31       ` Wang, Zhihong
2016-06-01  3:27   ` [dpdk-dev] [PATCH v2 4/5] testpmd: handle all rxqs in rss setup Zhihong Wang
2016-06-07 10:29     ` De Lara Guarch, Pablo
2016-06-08  1:28       ` Wang, Zhihong
2016-06-01  3:27   ` [dpdk-dev] [PATCH v2 5/5] testpmd: show topology at forwarding start Zhihong Wang
2016-06-07 10:56     ` De Lara Guarch, Pablo
2016-06-14 15:13     ` De Lara Guarch, Pablo
2016-06-15  7:05       ` Wang, Zhihong
2016-06-14 23:08 ` [dpdk-dev] [PATCH v3 0/5] vhost/virtio performance loopback utility Zhihong Wang
2016-06-14 23:08   ` [dpdk-dev] [PATCH v3 1/5] testpmd: add retry option Zhihong Wang
2016-06-14 23:08   ` [dpdk-dev] [PATCH v3 2/5] testpmd: configurable tx_first burst number Zhihong Wang
2016-06-14 23:08   ` [dpdk-dev] [PATCH v3 3/5] testpmd: show throughput in port stats Zhihong Wang
2016-06-14 23:08   ` [dpdk-dev] [PATCH v3 4/5] testpmd: handle all rxqs in rss setup Zhihong Wang
2016-06-27 14:23     ` Nélio Laranjeiro
2016-06-27 22:36       ` De Lara Guarch, Pablo
2016-06-28  8:34         ` Nélio Laranjeiro
2016-06-28 11:10           ` Wang, Zhihong
2016-06-14 23:08   ` [dpdk-dev] [PATCH v3 5/5] testpmd: show topology at forwarding start Zhihong Wang
2016-06-16 11:09     ` De Lara Guarch, Pablo
2016-06-16 13:33       ` Thomas Monjalon
2016-06-15 10:04   ` [dpdk-dev] [PATCH v3 0/5] vhost/virtio performance loopback utility De Lara Guarch, Pablo
2016-06-16 14:36     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462488421-118990-2-git-send-email-zhihong.wang@intel.com \
    --to=zhihong.wang@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=konstantin.ananyev@intel.com \
    --cc=thomas.monjalon@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).