From: Stephen Hurd <stephen.hurd@broadcom.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 11/40] bnxt: add Rx queue create/destroy operations
Date: Fri, 6 May 2016 12:25:51 -0700 [thread overview]
Message-ID: <1462562780-47991-11-git-send-email-stephen.hurd@broadcom.com> (raw)
In-Reply-To: <1462562780-47991-1-git-send-email-stephen.hurd@broadcom.com>
Initial create/destroy queue code. Requires RX ring support to be
functional.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/Makefile | 1 +
drivers/net/bnxt/bnxt.h | 2 +
drivers/net/bnxt/bnxt_ethdev.c | 3 +
drivers/net/bnxt/bnxt_rxq.c | 286 +++++++++++++++++++++++++++++++++
drivers/net/bnxt/bnxt_rxq.h | 74 +++++++++
drivers/net/bnxt/hsi_struct_def_dpdk.h | 121 ++++++++++++++
6 files changed, 487 insertions(+)
create mode 100644 drivers/net/bnxt/bnxt_rxq.c
create mode 100644 drivers/net/bnxt/bnxt_rxq.h
diff --git a/drivers/net/bnxt/Makefile b/drivers/net/bnxt/Makefile
index 0759df0..7320fac 100644
--- a/drivers/net/bnxt/Makefile
+++ b/drivers/net/bnxt/Makefile
@@ -53,6 +53,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_ethdev.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_filter.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_hwrm.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_ring.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_rxq.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_txq.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_vnic.c
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 54ddd24..38b590b 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -143,6 +143,8 @@ struct bnxt {
/* Default completion ring */
struct bnxt_cp_ring_info def_cp_ring;
+ unsigned nr_vnics;
+
struct bnxt_vnic_info *vnic_info;
STAILQ_HEAD(, bnxt_vnic_info) free_vnic_list;
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index d8dbc10..df39fae 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -41,6 +41,7 @@
#include "bnxt.h"
#include "bnxt_hwrm.h"
+#include "bnxt_rxq.h"
#include "bnxt_txq.h"
#define DRV_MODULE_NAME "bnxt"
@@ -177,6 +178,8 @@ static int bnxt_dev_configure_op(struct rte_eth_dev *eth_dev)
static struct eth_dev_ops bnxt_dev_ops = {
.dev_infos_get = bnxt_dev_info_get_op,
.dev_configure = bnxt_dev_configure_op,
+ .rx_queue_setup = bnxt_rx_queue_setup_op,
+ .rx_queue_release = bnxt_rx_queue_release_op,
.tx_queue_setup = bnxt_tx_queue_setup_op,
.tx_queue_release = bnxt_tx_queue_release_op,
};
diff --git a/drivers/net/bnxt/bnxt_rxq.c b/drivers/net/bnxt/bnxt_rxq.c
new file mode 100644
index 0000000..4ba5d75
--- /dev/null
+++ b/drivers/net/bnxt/bnxt_rxq.c
@@ -0,0 +1,286 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) Broadcom Limited.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <inttypes.h>
+
+#include <rte_malloc.h>
+
+#include "bnxt.h"
+#include "bnxt_filter.h"
+#include "bnxt_hwrm.h"
+#include "bnxt_ring.h"
+#include "bnxt_rxq.h"
+#include "bnxt_vnic.h"
+#include "hsi_struct_def_dpdk.h"
+
+/*
+ * RX Queues
+ */
+
+void bnxt_free_rxq_stats(struct bnxt_rx_queue *rxq)
+{
+ struct bnxt_cp_ring_info *cpr = rxq->cp_ring;
+
+ /* 'Unreserve' rte_memzone */
+ /* N/A */
+
+ if (cpr->hw_stats)
+ cpr->hw_stats = NULL;
+}
+
+int bnxt_mq_rx_configure(struct bnxt *bp)
+{
+ struct rte_eth_conf *dev_conf = &bp->eth_dev->data->dev_conf;
+ unsigned i, j, nb_q_per_grp, ring_idx;
+ int start_grp_id, end_grp_id, rc = 0;
+ struct bnxt_vnic_info *vnic;
+ struct bnxt_filter_info *filter;
+ struct bnxt_rx_queue *rxq;
+
+ bp->nr_vnics = 0;
+
+ /* Single queue mode */
+ if (bp->rx_cp_nr_rings < 2) {
+ vnic = bnxt_alloc_vnic(bp);
+ if (!vnic) {
+ RTE_LOG(ERR, PMD, "VNIC alloc failed\n");
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ STAILQ_INSERT_TAIL(&bp->ff_pool[0], vnic, next);
+ bp->nr_vnics++;
+
+ rxq = bp->eth_dev->data->rx_queues[0];
+ rxq->vnic = vnic;
+
+ vnic->func_default = true;
+ vnic->ff_pool_idx = 0;
+ vnic->start_grp_id = 1;
+ vnic->end_grp_id = vnic->start_grp_id +
+ bp->rx_cp_nr_rings - 1;
+ filter = bnxt_alloc_filter(bp);
+ if (!filter) {
+ RTE_LOG(ERR, PMD, "L2 filter alloc failed\n");
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
+ goto out;
+ }
+
+ /* Multi-queue mode */
+ if (dev_conf->rxmode.mq_mode & ETH_MQ_RX_VMDQ_FLAG) {
+ /* VMDq ONLY, VMDq+RSS, VMDq+DCB, VMDq+DCB+RSS */
+ enum rte_eth_nb_pools pools;
+
+ switch (dev_conf->rxmode.mq_mode) {
+ case ETH_MQ_RX_VMDQ_RSS:
+ case ETH_MQ_RX_VMDQ_ONLY:
+ {
+ const struct rte_eth_vmdq_rx_conf *conf =
+ &dev_conf->rx_adv_conf.vmdq_rx_conf;
+
+ /* ETH_8/64_POOLs */
+ pools = conf->nb_queue_pools;
+ break;
+ }
+ default:
+ RTE_LOG(ERR, PMD, "Unsupported mq_mod %d\n",
+ dev_conf->rxmode.mq_mode);
+ rc = -EINVAL;
+ goto err_out;
+ }
+ /* For each pool, allocate MACVLAN CFA rule & VNIC */
+ if (!pools) {
+ RTE_LOG(ERR, PMD,
+ "VMDq pool not set, defaulted to 64\n");
+ pools = ETH_64_POOLS;
+ }
+ nb_q_per_grp = bp->rx_cp_nr_rings / pools;
+ start_grp_id = 1;
+ end_grp_id = start_grp_id + nb_q_per_grp - 1;
+
+ ring_idx = 0;
+ for (i = 0; i < pools; i++) {
+ vnic = bnxt_alloc_vnic(bp);
+ if (!vnic) {
+ RTE_LOG(ERR, PMD,
+ "VNIC alloc failed\n");
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ STAILQ_INSERT_TAIL(&bp->ff_pool[i], vnic, next);
+ bp->nr_vnics++;
+
+ for (j = 0; j < nb_q_per_grp; j++, ring_idx++) {
+ rxq = bp->eth_dev->data->rx_queues[ring_idx];
+ rxq->vnic = vnic;
+ }
+ if (i == 0)
+ vnic->func_default = true;
+ vnic->ff_pool_idx = i;
+ vnic->start_grp_id = start_grp_id;
+ vnic->end_grp_id = end_grp_id;
+
+ filter = bnxt_alloc_filter(bp);
+ if (!filter) {
+ RTE_LOG(ERR, PMD,
+ "L2 filter alloc failed\n");
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ /* TODO: Configure & associate CFA rule for
+ each VNIC for each VMDq with MACVLAN, MACVLAN+TC */
+ STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
+
+ start_grp_id = end_grp_id + 1;
+ end_grp_id += nb_q_per_grp;
+ }
+ goto out;
+ }
+
+ /* Non-VMDq mode - RSS, DCB, RSS+DCB */
+ /* Init default VNIC for RSS or DCB only */
+ vnic = bnxt_alloc_vnic(bp);
+ if (!vnic) {
+ RTE_LOG(ERR, PMD, "VNIC alloc failed\n");
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ /* Partition the rx queues for the single pool */
+ for (i = 0; i < bp->rx_cp_nr_rings; i++) {
+ rxq = bp->eth_dev->data->rx_queues[i];
+ rxq->vnic = vnic;
+ }
+ STAILQ_INSERT_TAIL(&bp->ff_pool[0], vnic, next);
+ bp->nr_vnics++;
+
+ vnic->func_default = true;
+ vnic->ff_pool_idx = 0;
+ vnic->start_grp_id = 1;
+ vnic->end_grp_id = vnic->start_grp_id +
+ bp->rx_cp_nr_rings - 1;
+ filter = bnxt_alloc_filter(bp);
+ if (!filter) {
+ RTE_LOG(ERR, PMD, "L2 filter alloc failed\n");
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ STAILQ_INSERT_TAIL(&vnic->filter, filter, next);
+
+ if (dev_conf->rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG)
+ vnic->hash_type =
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 |
+ HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6;
+
+out:
+ return rc;
+
+err_out:
+ /* Free allocated vnic/filters */
+
+ return rc;
+}
+
+static void bnxt_rx_queue_release_mbufs(struct bnxt_rx_queue *rxq __rte_unused)
+{
+ /* TODO: Requires interaction with TX ring */
+}
+
+void bnxt_free_rx_mbufs(struct bnxt *bp)
+{
+ struct bnxt_rx_queue *rxq;
+ int i;
+
+ for (i = 0; i < (int)bp->rx_nr_rings; i++) {
+ rxq = bp->rx_queues[i];
+ bnxt_rx_queue_release_mbufs(rxq);
+ }
+}
+
+void bnxt_rx_queue_release_op(void *rx_queue)
+{
+ struct bnxt_rx_queue *rxq = (struct bnxt_rx_queue *)rx_queue;
+
+ if (rxq) {
+ bnxt_rx_queue_release_mbufs(rxq);
+
+ /* TODO: Free ring and stats here */
+
+ rte_free(rxq);
+ }
+}
+
+int bnxt_rx_queue_setup_op(struct rte_eth_dev *eth_dev,
+ uint16_t queue_idx,
+ uint16_t nb_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mp)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ struct bnxt_rx_queue *rxq;
+
+ if (!nb_desc || nb_desc > MAX_RX_DESC_CNT) {
+ RTE_LOG(ERR, PMD, "nb_desc %d is invalid", nb_desc);
+ return -EINVAL;
+ }
+
+ if (eth_dev->data->rx_queues) {
+ rxq = eth_dev->data->rx_queues[queue_idx];
+ if (rxq)
+ bnxt_rx_queue_release_op(rxq);
+ }
+ rxq = rte_zmalloc_socket("bnxt_rx_queue", sizeof(struct bnxt_rx_queue),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (!rxq) {
+ RTE_LOG(ERR, PMD, "bnxt_rx_queue allocation failed!");
+ return -ENOMEM;
+ }
+ rxq->bp = bp;
+ rxq->mb_pool = mp;
+ rxq->nb_rx_desc = nb_desc;
+ rxq->rx_free_thresh = rx_conf->rx_free_thresh;
+
+ /* TODO: Initialize ring structure */
+
+ rxq->queue_id = queue_idx;
+ rxq->port_id = eth_dev->data->port_id;
+ rxq->crc_len = (uint8_t)((eth_dev->data->dev_conf.rxmode.hw_strip_crc) ?
+ 0 : ETHER_CRC_LEN);
+
+ eth_dev->data->rx_queues[queue_idx] = rxq;
+ /* TODO: Allocate RX ring hardware descriptors */
+
+ return 0;
+}
diff --git a/drivers/net/bnxt/bnxt_rxq.h b/drivers/net/bnxt/bnxt_rxq.h
new file mode 100644
index 0000000..9554329
--- /dev/null
+++ b/drivers/net/bnxt/bnxt_rxq.h
@@ -0,0 +1,74 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) Broadcom Limited.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _BNXT_RQX_H_
+#define _BNXT_RQX_H_
+
+struct bnxt;
+struct bnxt_rx_ring_info;
+struct bnxt_cp_ring_info;
+struct bnxt_rx_queue {
+ struct rte_mempool *mb_pool; /* mbuf pool for RX ring */
+ struct rte_mbuf *pkt_first_seg; /* 1st seg of pkt */
+ struct rte_mbuf *pkt_last_seg; /* Last seg of pkt */
+ uint64_t mbuf_initializer; /* val to init mbuf */
+ uint16_t nb_rx_desc; /* num of RX desc */
+ uint16_t rx_tail; /* cur val of RDT register */
+ uint16_t nb_rx_hold; /* num held free RX desc */
+ uint16_t rx_free_thresh; /* max free RX desc to hold */
+ uint16_t queue_id; /* RX queue index */
+ uint16_t reg_idx; /* RX queue register index */
+ uint8_t port_id; /* Device port identifier */
+ uint8_t crc_len; /* 0 if CRC stripped, 4 otherwise */
+
+ struct bnxt *bp;
+ struct bnxt_vnic_info *vnic;
+
+ uint32_t rx_buf_size;
+ uint32_t rx_buf_use_size; /* useable size */
+ struct bnxt_rx_ring_info *rx_ring;
+ struct bnxt_cp_ring_info *cp_ring;
+};
+
+void bnxt_free_rxq_stats(struct bnxt_rx_queue *rxq);
+int bnxt_mq_rx_configure(struct bnxt *bp);
+void bnxt_rx_queue_release_op(void *rx_queue);
+int bnxt_rx_queue_setup_op(struct rte_eth_dev *eth_dev,
+ uint16_t queue_idx,
+ uint16_t nb_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mp);
+void bnxt_free_rx_mbufs(struct bnxt *bp);
+
+#endif
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index bfa8a7c..c5ff9ff 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -1946,6 +1946,127 @@ struct hwrm_queue_qportcfg_input {
uint16_t unused_0;
} __attribute__((packed));
+/* hwrm_vnic_rss_cfg */
+/* Description: This function is used to enable RSS configuration. */
+
+/* Input (48 bytes) */
+struct hwrm_vnic_rss_cfg_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * TCP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination ports of
+ * UDP/IPv4 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over source and
+ * destination IPv4 addresses of IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * TCP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
+ /*
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination ports of
+ * UDP/IPv6 packets.
+ */
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint32_t hash_type;
+
+ uint32_t unused_0;
+
+ /* This is the address for rss ring group table */
+ uint64_t ring_grp_tbl_addr;
+
+ /* This is the address for rss hash key table */
+ uint64_t hash_key_tbl_addr;
+
+ /* Index to the rss indirection table. */
+ uint16_t rss_ctx_idx;
+
+ uint16_t unused_1[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_rss_cfg_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
/* Output (32 bytes) */
struct hwrm_queue_qportcfg_output {
/*
--
1.9.1
next prev parent reply other threads:[~2016-05-06 19:26 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-02 21:36 [dpdk-dev] [PATCH] drivers/net/bnxt New driver for Broadcom bnxt Stephen Hurd
2016-03-02 21:44 ` Stephen Hemminger
2016-03-02 21:58 ` Thomas Monjalon
2016-03-03 4:08 ` [dpdk-dev] [PATCH 0/7] drivers/net/bnxt: new Broadcom bnxt driver Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-03-03 7:53 ` Simon Kågström
2016-03-03 9:28 ` Thomas Monjalon
2016-03-03 10:22 ` Simon Kågström
2016-03-03 4:08 ` [dpdk-dev] [PATCH 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 7/7] doc: add guide for new bnxt driver Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 0/7] drivers/net/bnxt: new Broadcom " Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-04-19 12:41 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-04-19 13:01 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-04 23:02 ` Stephen Hemminger
2016-03-04 23:58 ` Stephen Hurd
2016-04-19 14:19 ` Bruce Richardson
2016-04-19 20:51 ` Stephen Hurd
2016-04-20 11:01 ` Bruce Richardson
2016-04-20 21:32 ` Stephen Hurd
2016-04-21 10:00 ` Bruce Richardson
2016-04-21 10:11 ` Thomas Monjalon
2016-05-06 19:25 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 03/40] bnxt: add driver register/unregister support Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 07/40] bnxt: declare ring structs and free() func Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-06 19:25 ` Stephen Hurd [this message]
2016-05-06 19:25 ` [dpdk-dev] [PATCH 12/40] bnxt: statistics operations Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 25/40] bnxt: add ring group " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 34/40] bnxt: add device close operation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 38/40] bnxt: add RSS device operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-11 4:53 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Panu Matilainen
2016-05-11 20:59 ` Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 " Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-25 15:05 ` Bruce Richardson
2016-05-25 23:35 ` Stephen Hurd
2016-05-26 9:01 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 03/40] bnxt: add driver register/unregister support Stephen Hurd
2016-05-25 15:11 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-25 15:25 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-25 16:14 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 07/40] bnxt: declare ring structs and free() func Stephen Hurd
2016-05-25 16:37 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-25 17:33 ` Bruce Richardson
2016-05-26 9:38 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-25 17:51 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 11/40] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 12/40] bnxt: statistics operations Stephen Hurd
2016-05-26 9:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-26 10:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-26 10:52 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-26 10:59 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-26 12:04 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-26 12:06 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-26 12:14 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-26 12:23 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-26 12:45 ` Bruce Richardson
2016-05-26 13:19 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 25/40] bnxt: add ring group " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-26 13:15 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-26 13:24 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-26 13:25 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-26 13:39 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 34/40] bnxt: add device close operation Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 38/40] bnxt: add RSS device operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-26 15:20 ` Bruce Richardson
2016-05-25 15:02 ` [dpdk-dev] [PATCH v2 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Bruce Richardson
2016-05-25 20:59 ` Stephen Hurd
2016-05-26 9:05 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 7/7] doc: add guide for new bnxt driver Stephen Hurd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462562780-47991-11-git-send-email-stephen.hurd@broadcom.com \
--to=stephen.hurd@broadcom.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).