[dpdk-dev] [PATCH 19/40] bnxt: add HWRM vnic cfg function

[Stephen Hurd <stephen.hurd@broadcom.com>]

Configurs a vnic allocaed by vnic_alloc function.

Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/bnxt_hwrm.c           |  34 ++++++++
 drivers/net/bnxt/bnxt_hwrm.h           |   3 +-
 drivers/net/bnxt/hsi_struct_def_dpdk.h | 155 +++++++++++++++++++++++++++++++++
 3 files changed, 191 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index d716b67..2a18cf3 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -510,6 +510,40 @@ int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic)
 	return rc;
 }
 
+int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic)
+{
+	int rc = 0;
+	struct hwrm_vnic_cfg_input req = {.req_type = 0 };
+	struct hwrm_vnic_cfg_output *resp = bp->hwrm_cmd_resp_addr;
+
+	HWRM_PREP(req, VNIC_CFG, -1, resp);
+
+	/* Only RSS support for now TBD: COS & LB */
+	req.enables =
+	    rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP |
+			     HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE |
+			     HWRM_VNIC_CFG_INPUT_ENABLES_MRU);
+	req.vnic_id = rte_cpu_to_le_16(vnic->fw_vnic_id);
+	req.dflt_ring_grp =
+		rte_cpu_to_le_16(bp->grp_info[vnic->start_grp_id].fw_grp_id);
+	req.rss_rule = rte_cpu_to_le_16(vnic->fw_rss_cos_lb_ctx);
+	req.cos_rule = rte_cpu_to_le_16(0xffff);
+	req.lb_rule = rte_cpu_to_le_16(0xffff);
+	req.mru = rte_cpu_to_le_16(bp->eth_dev->data->mtu + ETHER_HDR_LEN +
+				   ETHER_CRC_LEN + VLAN_TAG_SIZE);
+	if (vnic->func_default)
+		req.flags = 1;
+	if (vnic->vlan_strip)
+		req.flags |=
+		    rte_cpu_to_le_32(HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE);
+
+	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+	HWRM_CHECK_RESULT;
+
+	return rc;
+}
+
 int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic)
 {
 	int rc = 0;
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 887ad2d..b5cf090 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -59,8 +59,9 @@ int bnxt_hwrm_stat_clear(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
 
 int bnxt_hwrm_ver_get(struct bnxt *bp);
 
-int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic);
 int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic);
+int bnxt_hwrm_vnic_cfg(struct bnxt *bp, struct bnxt_vnic_info *vnic);
+int bnxt_hwrm_vnic_free(struct bnxt *bp, struct bnxt_vnic_info *vnic);
 
 int bnxt_clear_all_hwrm_stat_ctxs(struct bnxt *bp);
 void bnxt_free_hwrm_resources(struct bnxt *bp);
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 93d50fb..b74f9f9 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -91,6 +91,7 @@ typedef struct ctx_hw_stats64 {
 #define HWRM_QUEUE_QPORTCFG		(UINT32_C(0x30))
 #define HWRM_VNIC_ALLOC			(UINT32_C(0x40))
 #define HWRM_VNIC_FREE			(UINT32_C(0x41))
+#define HWRM_VNIC_CFG			(UINT32_C(0x42))
 #define HWRM_CFA_L2_FILTER_ALLOC	(UINT32_C(0x90))
 #define HWRM_CFA_L2_FILTER_FREE		(UINT32_C(0x91))
 #define HWRM_CFA_L2_FILTER_CFG		(UINT32_C(0x92))
@@ -3268,6 +3269,160 @@ struct hwrm_vnic_alloc_output {
 	uint8_t valid;
 } __attribute__((packed));
 
+/* hwrm_vnic_cfg */
+/* Description: Configure the RX VNIC structure. */
+
+/* Input (40 bytes) */
+struct hwrm_vnic_cfg_input {
+	/*
+	 * This value indicates what type of request this is. The format for the
+	 * rest of the command is determined by this field.
+	 */
+	uint16_t req_type;
+
+	/*
+	 * This value indicates the what completion ring the request will be
+	 * optionally completed on. If the value is -1, then no CR completion
+	 * will be generated. Any other value must be a valid CR ring_id value
+	 * for this function.
+	 */
+	uint16_t cmpl_ring;
+
+	/* This value indicates the command sequence number. */
+	uint16_t seq_id;
+
+	/*
+	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+	 */
+	uint16_t target_id;
+
+	/*
+	 * This is the host address where the response will be written when the
+	 * request is complete. This area must be 16B aligned and must be
+	 * cleared to zero before the request is made.
+	 */
+	uint64_t resp_addr;
+
+	/*
+	 * When this bit is '1', the VNIC is requested to be the default VNIC
+	 * for the function.
+	 */
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT		UINT32_C(0x1)
+	/*
+	 * When this bit is '1', the VNIC is being configured to strip VLAN in
+	 * the RX path. If set to '0', then VLAN stripping is disabled on this
+	 * VNIC.
+	 */
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE	UINT32_C(0x2)
+	/*
+	 * When this bit is '1', the VNIC is being configured to buffer receive
+	 * packets in the hardware until the host posts new receive buffers. If
+	 * set to '0', then bd_stall is being configured to be disabled on this
+	 * VNIC.
+	 */
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE		UINT32_C(0x4)
+	/*
+	 * When this bit is '1', the VNIC is being configured to receive both
+	 * RoCE and non-RoCE traffic. If set to '0', then this VNIC is not
+	 * configured to be operating in dual VNIC mode.
+	 */
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE	UINT32_C(0x8)
+	/*
+	 * When this flag is set to '1', the VNIC is requested to be configured
+	 * to receive only RoCE traffic. If this flag is set to '0', then this
+	 * flag shall be ignored by the HWRM. If roce_dual_vnic_mode flag is set
+	 * to '1', then the HWRM client shall not set this flag to '1'.
+	 */
+	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE	UINT32_C(0x10)
+	uint32_t flags;
+
+	/* This bit must be '1' for the dflt_ring_grp field to be configured. */
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP	UINT32_C(0x1)
+	/* This bit must be '1' for the rss_rule field to be configured. */
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE		UINT32_C(0x2)
+	/* This bit must be '1' for the cos_rule field to be configured. */
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE		UINT32_C(0x4)
+	/* This bit must be '1' for the lb_rule field to be configured. */
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE		UINT32_C(0x8)
+	/* This bit must be '1' for the mru field to be configured. */
+	#define HWRM_VNIC_CFG_INPUT_ENABLES_MRU			UINT32_C(0x10)
+	uint32_t enables;
+
+	/* Logical vnic ID */
+	uint16_t vnic_id;
+
+	/*
+	 * Default Completion ring for the VNIC. This ring will be chosen if
+	 * packet does not match any RSS rules and if there is no COS rule.
+	 */
+	uint16_t dflt_ring_grp;
+
+	/*
+	 * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if there is no
+	 * RSS rule.
+	 */
+	uint16_t rss_rule;
+
+	/*
+	 * RSS ID for COS rule/table structure. 0xFF... (All Fs) if there is no
+	 * COS rule.
+	 */
+	uint16_t cos_rule;
+
+	/*
+	 * RSS ID for load balancing rule/table structure. 0xFF... (All Fs) if
+	 * there is no LB rule.
+	 */
+	uint16_t lb_rule;
+
+	/*
+	 * The maximum receive unit of the vnic. Each vnic is associated with a
+	 * function. The vnic mru value overwrites the mru setting of the
+	 * associated function. The HWRM shall make sure that vnic mru does not
+	 * exceed the mru of the port the function is associated with.
+	 */
+	uint16_t mru;
+
+	uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_cfg_output {
+	/*
+	 * Pass/Fail or error type Note: receiver to verify the in parameters,
+	 * and fail the call with an error when appropriate
+	 */
+	uint16_t error_code;
+
+	/* This field returns the type of original request. */
+	uint16_t req_type;
+
+	/* This field provides original sequence number of the command. */
+	uint16_t seq_id;
+
+	/*
+	 * This field is the length of the response in bytes. The last byte of
+	 * the response is a valid flag that will read as '1' when the command
+	 * has been completely written to memory.
+	 */
+	uint16_t resp_len;
+
+	uint32_t unused_0;
+	uint8_t unused_1;
+	uint8_t unused_2;
+	uint8_t unused_3;
+
+	/*
+	 * This field is used in Output records to indicate that the output is
+	 * completely written to RAM. This field should be read as '1' to
+	 * indicate that the output has been completely written. When writing a
+	 * command completion or response to an internal processor, the order of
+	 * writes has to be such that this field is written last.
+	 */
+	uint8_t valid;
+} __attribute__((packed));
+
 /* hwrm_vnic_free */
 /*
  * Description: Free a VNIC resource. Idle any resources associated with the
-- 
1.9.1