From: Stephen Hurd <stephen.hurd@broadcom.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 38/40] bnxt: add RSS device operations
Date: Fri, 6 May 2016 12:26:18 -0700 [thread overview]
Message-ID: <1462562780-47991-38-git-send-email-stephen.hurd@broadcom.com> (raw)
In-Reply-To: <1462562780-47991-1-git-send-email-stephen.hurd@broadcom.com>
Add rss_hash_update and rss_hash_conf_get
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 117 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 117 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 2503112..d14fcae 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -62,6 +62,14 @@ static struct rte_pci_id bnxt_pci_id_map[] = {
{.device_id = 0},
};
+#define BNXT_ETH_RSS_SUPPORT ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_NONFRAG_IPV6_UDP)
+
/***********************/
/*
@@ -632,6 +640,113 @@ static int bnxt_reta_query_op(struct rte_eth_dev *eth_dev,
return 0;
}
+static int bnxt_rss_hash_update_op(struct rte_eth_dev *eth_dev,
+ struct rte_eth_rss_conf *rss_conf)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ struct rte_eth_conf *dev_conf = &bp->eth_dev->data->dev_conf;
+ struct bnxt_vnic_info *vnic;
+ uint16_t hash_type = 0;
+ int i;
+
+ /* If RSS enablement were different than dev_configure,
+ then return -EINVAL */
+ if (dev_conf->rxmode.mq_mode & ETH_MQ_RX_RSS_FLAG) {
+ if (!rss_conf->rss_hf)
+ return -EINVAL;
+ } else {
+ if (rss_conf->rss_hf & BNXT_ETH_RSS_SUPPORT)
+ return -EINVAL;
+ }
+ if (rss_conf->rss_hf & ETH_RSS_IPV4)
+ hash_type |= HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4;
+ if (rss_conf->rss_hf & ETH_RSS_NONFRAG_IPV4_TCP)
+ hash_type |= HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4;
+ if (rss_conf->rss_hf & ETH_RSS_NONFRAG_IPV4_UDP)
+ hash_type |= HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4;
+ if (rss_conf->rss_hf & ETH_RSS_IPV6)
+ hash_type |= HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6;
+ if (rss_conf->rss_hf & ETH_RSS_NONFRAG_IPV6_TCP)
+ hash_type |= HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6;
+ if (rss_conf->rss_hf & ETH_RSS_NONFRAG_IPV6_UDP)
+ hash_type |= HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6;
+
+ /* Update the RSS VNIC(s) */
+ for (i = 0; i < MAX_FF_POOLS; i++) {
+ STAILQ_FOREACH(vnic, &bp->ff_pool[i], next) {
+ vnic->hash_type = hash_type;
+
+ /* Use the supplied key if the key length is
+ acceptable and the rss_key is not NULL */
+ if (rss_conf->rss_key &&
+ rss_conf->rss_key_len <= HW_HASH_KEY_SIZE)
+ memcpy(vnic->rss_hash_key, rss_conf->rss_key,
+ rss_conf->rss_key_len);
+
+ bnxt_hwrm_vnic_rss_cfg(bp, vnic);
+ }
+ }
+ return 0;
+}
+
+static int bnxt_rss_hash_conf_get_op(struct rte_eth_dev *eth_dev,
+ struct rte_eth_rss_conf *rss_conf)
+{
+ struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
+ struct bnxt_vnic_info *vnic = &bp->vnic_info[0];
+ int len;
+ uint32_t hash_types;
+
+ /* RSS configuration is the same for all VNICs */
+ if (vnic && vnic->rss_hash_key) {
+ if (rss_conf->rss_key) {
+ len = rss_conf->rss_key_len <= HW_HASH_KEY_SIZE ?
+ rss_conf->rss_key_len : HW_HASH_KEY_SIZE;
+ memcpy(rss_conf->rss_key, vnic->rss_hash_key, len);
+ }
+
+ hash_types = vnic->hash_type;
+ rss_conf->rss_hf = 0;
+ if (hash_types & HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4) {
+ rss_conf->rss_hf |= ETH_RSS_IPV4;
+ hash_types &= ~HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4;
+ }
+ if (hash_types & HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4) {
+ rss_conf->rss_hf |= ETH_RSS_NONFRAG_IPV4_TCP;
+ hash_types &=
+ ~HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4;
+ }
+ if (hash_types & HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4) {
+ rss_conf->rss_hf |= ETH_RSS_NONFRAG_IPV4_UDP;
+ hash_types &=
+ ~HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4;
+ }
+ if (hash_types & HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6) {
+ rss_conf->rss_hf |= ETH_RSS_IPV6;
+ hash_types &= ~HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6;
+ }
+ if (hash_types & HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6) {
+ rss_conf->rss_hf |= ETH_RSS_NONFRAG_IPV6_TCP;
+ hash_types &=
+ ~HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6;
+ }
+ if (hash_types & HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6) {
+ rss_conf->rss_hf |= ETH_RSS_NONFRAG_IPV6_UDP;
+ hash_types &=
+ ~HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6;
+ }
+ if (hash_types) {
+ RTE_LOG(ERR, PMD,
+ "Unknwon RSS config from firmware (%08x), RSS disabled",
+ vnic->hash_type);
+ return -ENOTSUP;
+ }
+ } else {
+ rss_conf->rss_hf = 0;
+ }
+ return 0;
+}
+
/*
* Initialization
*/
@@ -652,6 +767,8 @@ static struct eth_dev_ops bnxt_dev_ops = {
.tx_queue_release = bnxt_tx_queue_release_op,
.reta_update = bnxt_reta_update_op,
.reta_query = bnxt_reta_query_op,
+ .rss_hash_update = bnxt_rss_hash_update_op,
+ .rss_hash_conf_get = bnxt_rss_hash_conf_get_op,
.link_update = bnxt_link_update_op,
.promiscuous_enable = bnxt_promiscuous_enable_op,
.promiscuous_disable = bnxt_promiscuous_disable_op,
--
1.9.1
next prev parent reply other threads:[~2016-05-06 19:26 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-02 21:36 [dpdk-dev] [PATCH] drivers/net/bnxt New driver for Broadcom bnxt Stephen Hurd
2016-03-02 21:44 ` Stephen Hemminger
2016-03-02 21:58 ` Thomas Monjalon
2016-03-03 4:08 ` [dpdk-dev] [PATCH 0/7] drivers/net/bnxt: new Broadcom bnxt driver Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-03-03 7:53 ` Simon Kågström
2016-03-03 9:28 ` Thomas Monjalon
2016-03-03 10:22 ` Simon Kågström
2016-03-03 4:08 ` [dpdk-dev] [PATCH 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 7/7] doc: add guide for new bnxt driver Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 0/7] drivers/net/bnxt: new Broadcom " Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-04-19 12:41 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-04-19 13:01 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-04 23:02 ` Stephen Hemminger
2016-03-04 23:58 ` Stephen Hurd
2016-04-19 14:19 ` Bruce Richardson
2016-04-19 20:51 ` Stephen Hurd
2016-04-20 11:01 ` Bruce Richardson
2016-04-20 21:32 ` Stephen Hurd
2016-04-21 10:00 ` Bruce Richardson
2016-04-21 10:11 ` Thomas Monjalon
2016-05-06 19:25 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 03/40] bnxt: add driver register/unregister support Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 07/40] bnxt: declare ring structs and free() func Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 11/40] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 12/40] bnxt: statistics operations Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 25/40] bnxt: add ring group " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 34/40] bnxt: add device close operation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-06 19:26 ` Stephen Hurd [this message]
2016-05-06 19:26 ` [dpdk-dev] [PATCH 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-11 4:53 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Panu Matilainen
2016-05-11 20:59 ` Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 " Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-25 15:05 ` Bruce Richardson
2016-05-25 23:35 ` Stephen Hurd
2016-05-26 9:01 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 03/40] bnxt: add driver register/unregister support Stephen Hurd
2016-05-25 15:11 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-25 15:25 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-25 16:14 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 07/40] bnxt: declare ring structs and free() func Stephen Hurd
2016-05-25 16:37 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-25 17:33 ` Bruce Richardson
2016-05-26 9:38 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-25 17:51 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 11/40] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 12/40] bnxt: statistics operations Stephen Hurd
2016-05-26 9:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-26 10:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-26 10:52 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-26 10:59 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-26 12:04 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-26 12:06 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-26 12:14 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-26 12:23 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-26 12:45 ` Bruce Richardson
2016-05-26 13:19 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 25/40] bnxt: add ring group " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-26 13:15 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-26 13:24 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-26 13:25 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-26 13:39 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 34/40] bnxt: add device close operation Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 38/40] bnxt: add RSS device operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-26 15:20 ` Bruce Richardson
2016-05-25 15:02 ` [dpdk-dev] [PATCH v2 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Bruce Richardson
2016-05-25 20:59 ` Stephen Hurd
2016-05-26 9:05 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 7/7] doc: add guide for new bnxt driver Stephen Hurd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462562780-47991-38-git-send-email-stephen.hurd@broadcom.com \
--to=stephen.hurd@broadcom.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).