DPDK patches and discussions
 help / color / mirror / Atom feed
* Re: [dpdk-dev] [PATCHv2 1/2] mk:disabling CONFIG_RTE_EAL_IGB_UIO for armv8a
  2016-05-10 11:55 [dpdk-dev] [PATCHv2 1/2] mk:disabling CONFIG_RTE_EAL_IGB_UIO for armv8a Hemant Agrawal
@ 2016-05-10  6:40 ` Santosh Shukla
  2016-05-10 11:55 ` [dpdk-dev] [PATCHv2 2/2] mk: Introduce NXP dpaa2 architecture based on armv8-a Hemant Agrawal
  1 sibling, 0 replies; 3+ messages in thread
From: Santosh Shukla @ 2016-05-10  6:40 UTC (permalink / raw)
  To: Hemant Agrawal; +Cc: dev, jerin.jacob, jianbo.liu, thomas.monjalon

On Tue, May 10, 2016 at 05:25:33PM +0530, Hemant Agrawal wrote:
> The compilation with upstream kernel is broken with this config as enabled.
>
few nits:
- 'mk:..' subject header looks incorrect, you can start with 
  config/armv8a: disable igb_uio

- Also pl. reword the description- perhaps IGB_UIO not supported for arm64
 arch so disable.

if you agress to do then patch looks okay to me, 
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>

> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
>  config/defconfig_arm64-armv8a-linuxapp-gcc | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
> index 9abeca4..a786562 100644
> --- a/config/defconfig_arm64-armv8a-linuxapp-gcc
> +++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
> @@ -42,6 +42,8 @@ CONFIG_RTE_FORCE_INTRINSICS=y
>  CONFIG_RTE_TOOLCHAIN="gcc"
>  CONFIG_RTE_TOOLCHAIN_GCC=y
>  
> +CONFIG_RTE_EAL_IGB_UIO=n
> +
>  CONFIG_RTE_IXGBE_INC_VECTOR=n
>  CONFIG_RTE_LIBRTE_IVSHMEM=n
>  CONFIG_RTE_LIBRTE_FM10K_PMD=n
> -- 
> 1.9.1
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [dpdk-dev] [PATCHv2 1/2] mk:disabling CONFIG_RTE_EAL_IGB_UIO for armv8a
@ 2016-05-10 11:55 Hemant Agrawal
  2016-05-10  6:40 ` Santosh Shukla
  2016-05-10 11:55 ` [dpdk-dev] [PATCHv2 2/2] mk: Introduce NXP dpaa2 architecture based on armv8-a Hemant Agrawal
  0 siblings, 2 replies; 3+ messages in thread
From: Hemant Agrawal @ 2016-05-10 11:55 UTC (permalink / raw)
  To: dev; +Cc: jerin.jacob, jianbo.liu, santosh.shukla, thomas.monjalon

The compilation with upstream kernel is broken with this config as enabled.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 config/defconfig_arm64-armv8a-linuxapp-gcc | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
index 9abeca4..a786562 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-gcc
+++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
@@ -42,6 +42,8 @@ CONFIG_RTE_FORCE_INTRINSICS=y
 CONFIG_RTE_TOOLCHAIN="gcc"
 CONFIG_RTE_TOOLCHAIN_GCC=y
 
+CONFIG_RTE_EAL_IGB_UIO=n
+
 CONFIG_RTE_IXGBE_INC_VECTOR=n
 CONFIG_RTE_LIBRTE_IVSHMEM=n
 CONFIG_RTE_LIBRTE_FM10K_PMD=n
-- 
1.9.1

^ permalink raw reply	[flat|nested] 3+ messages in thread

* [dpdk-dev] [PATCHv2 2/2] mk: Introduce NXP dpaa2 architecture based on armv8-a
  2016-05-10 11:55 [dpdk-dev] [PATCHv2 1/2] mk:disabling CONFIG_RTE_EAL_IGB_UIO for armv8a Hemant Agrawal
  2016-05-10  6:40 ` Santosh Shukla
@ 2016-05-10 11:55 ` Hemant Agrawal
  1 sibling, 0 replies; 3+ messages in thread
From: Hemant Agrawal @ 2016-05-10 11:55 UTC (permalink / raw)
  To: dev; +Cc: jerin.jacob, jianbo.liu, santosh.shukla, thomas.monjalon

This patch introduces dpaa2 machine target to address difference
in cpu parameter, number of core to 8 and no numa support
w.r.t default armv8-a machine

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 config/defconfig_arm64-dpaa2-linuxapp-gcc | 42 ++++++++++++++++++++++
 mk/machine/dpaa2/rte.vars.mk              | 60 +++++++++++++++++++++++++++++++
 2 files changed, 102 insertions(+)
 create mode 100644 config/defconfig_arm64-dpaa2-linuxapp-gcc
 create mode 100644 mk/machine/dpaa2/rte.vars.mk

diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
new file mode 100644
index 0000000..66df54c
--- /dev/null
+++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
@@ -0,0 +1,42 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Freescale Semiconductor nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#include "defconfig_arm64-armv8a-linuxapp-gcc"
+
+# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support
+CONFIG_RTE_MACHINE="dpaa2"
+CONFIG_RTE_ARCH_ARM_TUNE="cortex-a57+fp+simd"
+
+#
+# Compile Environment Abstraction Layer
+#
+CONFIG_RTE_MAX_LCORE=8
+CONFIG_RTE_MAX_NUMA_NODES=1
diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk
new file mode 100644
index 0000000..8541633
--- /dev/null
+++ b/mk/machine/dpaa2/rte.vars.mk
@@ -0,0 +1,60 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Freescale Semiconductor nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#
+# machine:
+#
+#   - can define ARCH variable (overridden by cmdline value)
+#   - can define CROSS variable (overridden by cmdline value)
+#   - define MACHINE_CFLAGS variable (overridden by cmdline value)
+#   - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+#   - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+#   - can define CPU_CFLAGS variable (overridden by cmdline value) that
+#     overrides the one defined in arch.
+#   - can define CPU_LDFLAGS variable (overridden by cmdline value) that
+#     overrides the one defined in arch.
+#   - can define CPU_ASFLAGS variable (overridden by cmdline value) that
+#     overrides the one defined in arch.
+#   - may override any previously defined variable
+#
+
+# ARCH =
+# CROSS =
+# MACHINE_CFLAGS =
+# MACHINE_LDFLAGS =
+# MACHINE_ASFLAGS =
+# CPU_CFLAGS =
+# CPU_LDFLAGS =
+# CPU_ASFLAGS =
+MACHINE_CFLAGS += -march=armv8-a
+
+ifdef CONFIG_RTE_ARCH_ARM_TUNE
+MACHINE_CFLAGS += -mcpu=$(CONFIG_RTE_ARCH_ARM_TUNE)
+endif
-- 
1.9.1

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2016-05-10  6:40 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-10 11:55 [dpdk-dev] [PATCHv2 1/2] mk:disabling CONFIG_RTE_EAL_IGB_UIO for armv8a Hemant Agrawal
2016-05-10  6:40 ` Santosh Shukla
2016-05-10 11:55 ` [dpdk-dev] [PATCHv2 2/2] mk: Introduce NXP dpaa2 architecture based on armv8-a Hemant Agrawal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).