From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: <dev@dpdk.org>
Cc: <jerin.jacob@caviumnetworks.com>, <jianbo.liu@linaro.org>,
<santosh.shukla@caviumnetworks.com>, <thomas.monjalon@6wind.com>
Subject: [dpdk-dev] [PATCHv3 2/2] mk: Introduce NXP dpaa2 architecture based on armv8-a
Date: Wed, 11 May 2016 19:17:59 +0530 [thread overview]
Message-ID: <1462974479-26180-2-git-send-email-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <1462974479-26180-1-git-send-email-hemant.agrawal@nxp.com>
This patch introduces dpaa2 machine target to address difference
in cpu parameter, number of core to 8 and no numa support
w.r.t default armv8-a machine
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
config/defconfig_arm64-dpaa2-linuxapp-gcc | 42 ++++++++++++++++++++++
mk/machine/dpaa2/rte.vars.mk | 60 +++++++++++++++++++++++++++++++
2 files changed, 102 insertions(+)
create mode 100644 config/defconfig_arm64-dpaa2-linuxapp-gcc
create mode 100644 mk/machine/dpaa2/rte.vars.mk
diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
new file mode 100644
index 0000000..66df54c
--- /dev/null
+++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
@@ -0,0 +1,42 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Freescale Semiconductor nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#include "defconfig_arm64-armv8a-linuxapp-gcc"
+
+# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support
+CONFIG_RTE_MACHINE="dpaa2"
+CONFIG_RTE_ARCH_ARM_TUNE="cortex-a57+fp+simd"
+
+#
+# Compile Environment Abstraction Layer
+#
+CONFIG_RTE_MAX_LCORE=8
+CONFIG_RTE_MAX_NUMA_NODES=1
diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk
new file mode 100644
index 0000000..8541633
--- /dev/null
+++ b/mk/machine/dpaa2/rte.vars.mk
@@ -0,0 +1,60 @@
+# BSD LICENSE
+#
+# Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Freescale Semiconductor nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+#
+# machine:
+#
+# - can define ARCH variable (overridden by cmdline value)
+# - can define CROSS variable (overridden by cmdline value)
+# - define MACHINE_CFLAGS variable (overridden by cmdline value)
+# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
+# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
+# - can define CPU_CFLAGS variable (overridden by cmdline value) that
+# overrides the one defined in arch.
+# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
+# overrides the one defined in arch.
+# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
+# overrides the one defined in arch.
+# - may override any previously defined variable
+#
+
+# ARCH =
+# CROSS =
+# MACHINE_CFLAGS =
+# MACHINE_LDFLAGS =
+# MACHINE_ASFLAGS =
+# CPU_CFLAGS =
+# CPU_LDFLAGS =
+# CPU_ASFLAGS =
+MACHINE_CFLAGS += -march=armv8-a
+
+ifdef CONFIG_RTE_ARCH_ARM_TUNE
+MACHINE_CFLAGS += -mcpu=$(CONFIG_RTE_ARCH_ARM_TUNE)
+endif
--
1.9.1
next prev parent reply other threads:[~2016-05-11 8:13 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 13:47 [dpdk-dev] [PATCHv3 1/2] config/armv8a: disable igb_uio Hemant Agrawal
2016-05-11 13:47 ` Hemant Agrawal [this message]
2016-05-11 15:22 ` Stephen Hemminger
2016-05-11 16:57 ` Santosh Shukla
2016-05-11 17:02 ` Jerin Jacob
2016-05-11 18:25 ` Stephen Hemminger
2016-05-12 2:01 ` Jianbo Liu
2016-05-12 3:17 ` Santosh Shukla
2016-05-12 3:42 ` Jianbo Liu
2016-05-12 5:06 ` Santosh Shukla
2016-05-12 5:54 ` Jianbo Liu
2016-05-12 8:57 ` Santosh Shukla
2016-05-12 9:52 ` Jianbo Liu
2016-05-12 10:31 ` Santosh Shukla
2016-05-13 1:43 ` Jianbo Liu
2016-05-13 3:37 ` Hemant Agrawal
2016-05-13 7:47 ` Jerin Jacob
2016-05-13 10:09 ` Jianbo Liu
2016-05-12 3:00 ` Jerin Jacob
2016-05-13 12:50 ` Thomas Monjalon
2016-05-13 13:11 ` Santosh Shukla
2016-05-18 14:28 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462974479-26180-2-git-send-email-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=dev@dpdk.org \
--cc=jerin.jacob@caviumnetworks.com \
--cc=jianbo.liu@linaro.org \
--cc=santosh.shukla@caviumnetworks.com \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).