From: Stephen Hurd <stephen.hurd@broadcom.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 07/40] bnxt: declare ring structs and free() func
Date: Fri, 13 May 2016 15:45:56 -0700 [thread overview]
Message-ID: <1463179589-82681-7-git-send-email-stephen.hurd@broadcom.com> (raw)
In-Reply-To: <1463179589-82681-1-git-send-email-stephen.hurd@broadcom.com>
Declare ring structures and a ring free() function.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/Makefile | 1 +
drivers/net/bnxt/bnxt_ring.c | 51 ++++++++++++++++++++++++
drivers/net/bnxt/bnxt_ring.h | 92 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 144 insertions(+)
create mode 100644 drivers/net/bnxt/bnxt_ring.c
create mode 100644 drivers/net/bnxt/bnxt_ring.h
diff --git a/drivers/net/bnxt/Makefile b/drivers/net/bnxt/Makefile
index c57afaa..757ea62 100644
--- a/drivers/net/bnxt/Makefile
+++ b/drivers/net/bnxt/Makefile
@@ -50,6 +50,7 @@ EXPORT_MAP := rte_pmd_bnxt_version.map
#
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_ethdev.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_hwrm.c
+SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_ring.c
SRCS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt_vnic.c
#
diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
new file mode 100644
index 0000000..0434b07
--- /dev/null
+++ b/drivers/net/bnxt/bnxt_ring.c
@@ -0,0 +1,51 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) Broadcom Limited.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "bnxt.h"
+#include "bnxt_ring.h"
+
+/*
+ * Generic ring handling
+ */
+
+void bnxt_free_ring(struct bnxt_ring_struct *ring)
+{
+ /* The actual ring is reserved via rte_memzone_reserve API.
+ The current document/code indicates that:
+ "Note: A reserved zone cannot be freed."
+ */
+ if (ring->vmem_size && *ring->vmem) {
+ memset((char *)*ring->vmem, 0, ring->vmem_size);
+ *ring->vmem = NULL;
+ }
+}
diff --git a/drivers/net/bnxt/bnxt_ring.h b/drivers/net/bnxt/bnxt_ring.h
new file mode 100644
index 0000000..f44025c
--- /dev/null
+++ b/drivers/net/bnxt/bnxt_ring.h
@@ -0,0 +1,92 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) Broadcom Limited.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _BNXT_RING_H_
+#define _BNXT_RING_H_
+
+#include <inttypes.h>
+
+#include <rte_memory.h>
+
+#define RING_NEXT(ring, idx) (((idx) + 1) & (ring)->ring_mask)
+
+#define RTE_MBUF_DATA_DMA_ADDR(mb) \
+ ((uint64_t) ((mb)->buf_physaddr + (mb)->data_off))
+
+#define DB_IDX_MASK 0xffffff
+#define DB_IDX_VALID (0x1<<26)
+#define DB_IRQ_DIS (0x1<<27)
+#define DB_KEY_TX (0x0<<28)
+#define DB_KEY_RX (0x1<<28)
+#define DB_KEY_CP (0x2<<28)
+#define DB_KEY_ST (0x3<<28)
+#define DB_KEY_TX_PUSH (0x4<<28)
+#define DB_LONG_TX_PUSH (0x2<<24)
+
+#define DEFAULT_CP_RING_SIZE 256
+#define DEFAULT_RX_RING_SIZE 256
+#define DEFAULT_TX_RING_SIZE 256
+
+#define MAX_TPA 128
+
+/* TODO: These are derived from the Linux driver assuming 4k pages */
+#define MAX_RX_DESC_CNT (8 * 1024)
+#define MAX_TX_DESC_CNT (4 * 1024)
+#define MAX_CP_DESC_CNT (16 * 1024)
+
+#define INVALID_HW_RING_ID ((uint16_t) -1)
+
+struct bnxt_ring_struct {
+ void *bd;
+ phys_addr_t bd_dma;
+ uint32_t ring_size;
+ uint32_t ring_mask;
+
+ int vmem_size;
+ void **vmem;
+
+ uint16_t fw_ring_id; /* Ring id filled by Chimp FW */
+};
+
+struct bnxt_ring_grp_info {
+ uint16_t fw_stats_ctx;
+ uint16_t fw_grp_id;
+ uint16_t rx_fw_ring_id;
+ uint16_t cp_fw_ring_id;
+ uint16_t ag_fw_ring_id;
+};
+
+struct bnxt;
+void bnxt_free_ring(struct bnxt_ring_struct *ring);
+
+#endif
--
1.9.1
next prev parent reply other threads:[~2016-05-13 22:50 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-02 21:36 [dpdk-dev] [PATCH] drivers/net/bnxt New driver for Broadcom bnxt Stephen Hurd
2016-03-02 21:44 ` Stephen Hemminger
2016-03-02 21:58 ` Thomas Monjalon
2016-03-03 4:08 ` [dpdk-dev] [PATCH 0/7] drivers/net/bnxt: new Broadcom bnxt driver Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-03-03 7:53 ` Simon Kågström
2016-03-03 9:28 ` Thomas Monjalon
2016-03-03 10:22 ` Simon Kågström
2016-03-03 4:08 ` [dpdk-dev] [PATCH 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 7/7] doc: add guide for new bnxt driver Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 0/7] drivers/net/bnxt: new Broadcom " Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-04-19 12:41 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-04-19 13:01 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-04 23:02 ` Stephen Hemminger
2016-03-04 23:58 ` Stephen Hurd
2016-04-19 14:19 ` Bruce Richardson
2016-04-19 20:51 ` Stephen Hurd
2016-04-20 11:01 ` Bruce Richardson
2016-04-20 21:32 ` Stephen Hurd
2016-04-21 10:00 ` Bruce Richardson
2016-04-21 10:11 ` Thomas Monjalon
2016-05-06 19:25 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 03/40] bnxt: add driver register/unregister support Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 07/40] bnxt: declare ring structs and free() func Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 11/40] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 12/40] bnxt: statistics operations Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 25/40] bnxt: add ring group " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 34/40] bnxt: add device close operation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 38/40] bnxt: add RSS device operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-11 4:53 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Panu Matilainen
2016-05-11 20:59 ` Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 " Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-25 15:05 ` Bruce Richardson
2016-05-25 23:35 ` Stephen Hurd
2016-05-26 9:01 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 03/40] bnxt: add driver register/unregister support Stephen Hurd
2016-05-25 15:11 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-25 15:25 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-25 16:14 ` Bruce Richardson
2016-05-13 22:45 ` Stephen Hurd [this message]
2016-05-25 16:37 ` [dpdk-dev] [PATCH v2 07/40] bnxt: declare ring structs and free() func Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-25 17:33 ` Bruce Richardson
2016-05-26 9:38 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-25 17:51 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 11/40] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 12/40] bnxt: statistics operations Stephen Hurd
2016-05-26 9:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-26 10:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-26 10:52 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-26 10:59 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-26 12:04 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-26 12:06 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-26 12:14 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-26 12:23 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-26 12:45 ` Bruce Richardson
2016-05-26 13:19 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 25/40] bnxt: add ring group " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-26 13:15 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-26 13:24 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-26 13:25 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-26 13:39 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 34/40] bnxt: add device close operation Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 38/40] bnxt: add RSS device operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-26 15:20 ` Bruce Richardson
2016-05-25 15:02 ` [dpdk-dev] [PATCH v2 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Bruce Richardson
2016-05-25 20:59 ` Stephen Hurd
2016-05-26 9:05 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 7/7] doc: add guide for new bnxt driver Stephen Hurd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463179589-82681-7-git-send-email-stephen.hurd@broadcom.com \
--to=stephen.hurd@broadcom.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).