From: Ziye Yang <ziye.yang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2] ci: Add the class_id support in pci probe
Date: Thu, 19 May 2016 20:25:00 +0800 [thread overview]
Message-ID: <1463660700-42992-1-git-send-email-ziye.yang@intel.com> (raw)
In-Reply-To: <1462946895-49958-1-git-send-email-ziye.yang@intel.com>
This patch is used to add the class_id (class_code,
subclass_code, programming_interface) support for
pci_device probe. With this patch, it will be
flexible for users to probe a class of devices
by class_id.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
---
doc/guides/rel_notes/deprecation.rst | 6 ------
lib/librte_eal/bsdapp/eal/eal_pci.c | 5 +++++
lib/librte_eal/common/eal_common_pci.c | 3 +++
lib/librte_eal/common/include/rte_pci.h | 8 ++++++--
lib/librte_eal/linuxapp/eal/eal_pci.c | 9 +++++++++
5 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index 7d94ba5..28f9c61 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -20,12 +20,6 @@ Deprecation Notices
do not need to care about the kind of devices that are being used, making it
easier to add new buses later.
-* ABI changes are planned for struct rte_pci_id, i.e., add new field ``class``.
- This new added ``class`` field can be used to probe pci device by class
- related info. This change should impact size of struct rte_pci_id and struct
- rte_pci_device. The release 16.04 does not contain these ABI changes, but
- release 16.07 will.
-
* The xstats API and rte_eth_xstats struct will be changed to allow retrieval
of values without any string copies or parsing.
No backwards compatibility is planned, as it would require code duplication
diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index 2d16d78..7fdd6f1 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -278,6 +278,11 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
/* get subsystem_device id */
dev->id.subsystem_device_id = conf->pc_subdevice;
+ /* get class id */
+ dev->id.class_id = (conf->pc_class << 16) |
+ (conf->pc_subclass << 8) |
+ (conf->pc_progif);
+
/* TODO: get max_vfs */
dev->max_vfs = 0;
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index 3cae4cb..6c3117d 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -162,6 +162,9 @@ rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *d
if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
id_table->subsystem_device_id != PCI_ANY_ID)
continue;
+ if (id_table->class_id != dev->id.class_id &&
+ id_table->class_id != RTE_CLASS_ANY_ID)
+ continue;
struct rte_pci_addr *loc = &dev->addr;
diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
index 8fa2712..c30adaf 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -125,6 +125,7 @@ struct rte_pci_resource {
* table of these IDs for each device that it supports.
*/
struct rte_pci_id {
+ uint32_t class_id; /**< Class ID (class, subclass, pi) or RTE_CLASS_ANY_ID. */
uint16_t vendor_id; /**< Vendor ID or PCI_ANY_ID. */
uint16_t device_id; /**< Device ID or PCI_ANY_ID. */
uint16_t subsystem_vendor_id; /**< Subsystem vendor ID or PCI_ANY_ID. */
@@ -170,6 +171,7 @@ struct rte_pci_device {
/** Any PCI device identifier (vendor, device, ...) */
#define PCI_ANY_ID (0xffff)
+#define RTE_CLASS_ANY_ID (0xffffff)
#ifdef __cplusplus
/** C++ macro used to help building up tables of device IDs */
@@ -177,14 +179,16 @@ struct rte_pci_device {
(vend), \
(dev), \
PCI_ANY_ID, \
- PCI_ANY_ID
+ PCI_ANY_ID, \
+ RTE_CLASS_ANY_ID
#else
/** Macro used to help building up tables of device IDs */
#define RTE_PCI_DEVICE(vend, dev) \
.vendor_id = (vend), \
.device_id = (dev), \
.subsystem_vendor_id = PCI_ANY_ID, \
- .subsystem_device_id = PCI_ANY_ID
+ .subsystem_device_id = PCI_ANY_ID, \
+ .class_id = RTE_CLASS_ANY_ID
#endif
struct rte_pci_driver;
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index bdc08a0..ff255b4 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -306,6 +306,15 @@ pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
}
dev->id.subsystem_device_id = (uint16_t)tmp;
+ /* get class_id */
+ snprintf(filename, sizeof(filename), "%s/class",
+ dirname);
+ if (eal_parse_sysfs_value(filename, &tmp) < 0) {
+ free(dev);
+ return -1;
+ }
+ dev->id.class_id = (uint32_t)tmp & RTE_CLASS_ANY_ID;
+
/* get max_vfs */
dev->max_vfs = 0;
snprintf(filename, sizeof(filename), "%s/max_vfs", dirname);
--
1.9.3
next prev parent reply other threads:[~2016-05-19 12:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 6:08 [dpdk-dev] [PATCH] pci: " Ziye Yang
2016-05-11 15:21 ` Stephen Hemminger
2016-05-11 15:34 ` Richardson, Bruce
2016-05-19 10:33 ` Thomas Monjalon
2016-05-19 12:18 ` Yang, Ziye
2016-05-19 12:57 ` Thomas Monjalon
2016-05-19 13:14 ` Yang, Ziye
2016-05-19 12:25 ` Ziye Yang [this message]
2016-05-19 13:17 ` [dpdk-dev] [PATCH v3] ci: " Ziye Yang
2016-05-24 9:29 ` Thomas Monjalon
2016-05-24 12:50 ` [dpdk-dev] [PATCH v4] Pci: Add the class_id support Ziye Yang
2016-06-14 14:52 ` Thomas Monjalon
2016-07-06 11:08 ` Ferruh Yigit
2016-07-07 7:46 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463660700-42992-1-git-send-email-ziye.yang@intel.com \
--to=ziye.yang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).