From: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To: dev@dpdk.org
Cc: pablo.de.lara.guarch@intel.com, john.mcnamara@intel.com
Subject: [dpdk-dev] [PATCH v3 8/9] examples/ipsec-secgw: transport mode support
Date: Thu, 9 Jun 2016 09:42:49 +0100 [thread overview]
Message-ID: <1465461770-42233-9-git-send-email-sergio.gonzalez.monroy@intel.com> (raw)
In-Reply-To: <1465461770-42233-1-git-send-email-sergio.gonzalez.monroy@intel.com>
IPSec transport mode support.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
---
examples/ipsec-secgw/esp.c | 124 ++++++++++++++++++++++++++++++-------------
examples/ipsec-secgw/ipsec.h | 1 +
examples/ipsec-secgw/rt.c | 32 +++++++++++
examples/ipsec-secgw/sa.c | 39 ++++++++++++++
examples/ipsec-secgw/sp4.c | 40 ++++++++++++++
examples/ipsec-secgw/sp6.c | 48 +++++++++++++++++
6 files changed, 248 insertions(+), 36 deletions(-)
diff --git a/examples/ipsec-secgw/esp.c b/examples/ipsec-secgw/esp.c
index e1fde36..05caa77 100644
--- a/examples/ipsec-secgw/esp.c
+++ b/examples/ipsec-secgw/esp.c
@@ -42,7 +42,6 @@
#include <unistd.h>
#include <rte_common.h>
-#include <rte_memcpy.h>
#include <rte_crypto.h>
#include <rte_cryptodev.h>
#include <rte_random.h>
@@ -70,21 +69,24 @@ int
esp_inbound(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop)
{
- int32_t payload_len, ip_hdr_len;
+ struct ip *ip4;
struct rte_crypto_sym_op *sym_cop;
+ int32_t payload_len, ip_hdr_len;
RTE_ASSERT(m != NULL);
RTE_ASSERT(sa != NULL);
RTE_ASSERT(cop != NULL);
- ip_hdr_len = 0;
- switch (sa->flags) {
- case IP4_TUNNEL:
- ip_hdr_len = sizeof(struct ip);
- break;
- case IP6_TUNNEL:
+ ip4 = rte_pktmbuf_mtod(m, struct ip *);
+ if (likely(ip4->ip_v == IPVERSION))
+ ip_hdr_len = ip4->ip_hl * 4;
+ else if (ip4->ip_v == IP6_VERSION)
+ /* XXX No option headers supported */
ip_hdr_len = sizeof(struct ip6_hdr);
- break;
+ else {
+ RTE_LOG(ERR, IPSEC_ESP, "invalid IP packet type %d\n",
+ ip4->ip_v);
+ return -EINVAL;
}
payload_len = rte_pktmbuf_pkt_len(m) - ip_hdr_len -
@@ -126,6 +128,8 @@ int
esp_inbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop)
{
+ struct ip *ip4, *ip;
+ struct ip6_hdr *ip6;
uint8_t *nexthdr, *pad_len;
uint8_t *padding;
uint16_t i;
@@ -135,7 +139,7 @@ esp_inbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
RTE_ASSERT(cop != NULL);
if (cop->status != RTE_CRYPTO_OP_STATUS_SUCCESS) {
- RTE_LOG(ERR, IPSEC_ESP, "Failed crypto op\n");
+ RTE_LOG(ERR, IPSEC_ESP, "failed crypto op\n");
return -1;
}
@@ -146,7 +150,7 @@ esp_inbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
padding = pad_len - *pad_len;
for (i = 0; i < *pad_len; i++) {
if (padding[i] != i + 1) {
- RTE_LOG(ERR, IPSEC_ESP, "invalid pad_len field\n");
+ RTE_LOG(ERR, IPSEC_ESP, "invalid padding\n");
return -EINVAL;
}
}
@@ -157,7 +161,23 @@ esp_inbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
return -EINVAL;
}
- ipip_inbound(m, sizeof(struct esp_hdr) + sa->iv_len);
+ if (unlikely(sa->flags == TRANSPORT)) {
+ ip = rte_pktmbuf_mtod(m, struct ip *);
+ ip4 = (struct ip *)rte_pktmbuf_adj(m,
+ sizeof(struct esp_hdr) + sa->iv_len);
+ if (likely(ip->ip_v == IPVERSION)) {
+ memmove(ip4, ip, ip->ip_hl * 4);
+ ip4->ip_p = *nexthdr;
+ ip4->ip_len = htons(rte_pktmbuf_data_len(m));
+ } else {
+ ip6 = (struct ip6_hdr *)ip4;
+ /* XXX No option headers supported */
+ memmove(ip6, ip, sizeof(struct ip6_hdr));
+ ip6->ip6_nxt = *nexthdr;
+ ip6->ip6_plen = htons(rte_pktmbuf_data_len(m));
+ }
+ } else
+ ipip_inbound(m, sizeof(struct esp_hdr) + sa->iv_len);
return 0;
}
@@ -166,31 +186,57 @@ int
esp_outbound(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop)
{
- uint16_t pad_payload_len, pad_len, ip_hdr_len;
struct ip *ip4;
struct ip6_hdr *ip6;
- struct esp_hdr *esp;
- int32_t i;
- char *padding;
+ struct esp_hdr *esp = NULL;
+ uint8_t *padding, *new_ip, nlp;
struct rte_crypto_sym_op *sym_cop;
+ int32_t i;
+ uint16_t pad_payload_len, pad_len, ip_hdr_len;
RTE_ASSERT(m != NULL);
RTE_ASSERT(sa != NULL);
RTE_ASSERT(cop != NULL);
- /* Payload length */
- pad_payload_len = RTE_ALIGN_CEIL(rte_pktmbuf_pkt_len(m) + 2,
- sa->block_size);
- pad_len = pad_payload_len - rte_pktmbuf_pkt_len(m);
-
ip_hdr_len = 0;
- switch (sa->flags) {
- case IP4_TUNNEL:
+
+ ip4 = rte_pktmbuf_mtod(m, struct ip *);
+ if (likely(ip4->ip_v == IPVERSION)) {
+ if (unlikely(sa->flags == TRANSPORT)) {
+ ip_hdr_len = ip4->ip_hl * 4;
+ nlp = ip4->ip_p;
+ } else
+ nlp = IPPROTO_IPIP;
+ } else if (ip4->ip_v == IP6_VERSION) {
+ if (unlikely(sa->flags == TRANSPORT)) {
+ /* XXX No option headers supported */
+ ip_hdr_len = sizeof(struct ip6_hdr);
+ ip6 = (struct ip6_hdr *)ip4;
+ nlp = ip6->ip6_nxt;
+ } else
+ nlp = IPPROTO_IPV6;
+ } else {
+ RTE_LOG(ERR, IPSEC_ESP, "invalid IP packet type %d\n",
+ ip4->ip_v);
+ return -EINVAL;
+ }
+
+ /* Padded payload length */
+ pad_payload_len = RTE_ALIGN_CEIL(rte_pktmbuf_pkt_len(m) -
+ ip_hdr_len + 2, sa->block_size);
+ pad_len = pad_payload_len + ip_hdr_len - rte_pktmbuf_pkt_len(m);
+
+ RTE_ASSERT(sa->flags == IP4_TUNNEL || sa->flags == IP6_TUNNEL ||
+ sa->flags == TRANSPORT);
+
+ if (likely(sa->flags == IP4_TUNNEL))
ip_hdr_len = sizeof(struct ip);
- break;
- case IP6_TUNNEL:
+ else if (sa->flags == IP6_TUNNEL)
ip_hdr_len = sizeof(struct ip6_hdr);
- break;
+ else if (sa->flags != TRANSPORT) {
+ RTE_LOG(ERR, IPSEC_ESP, "Unsupported SA flags: 0x%x\n",
+ sa->flags);
+ return -EINVAL;
}
/* Check maximum packet size */
@@ -200,7 +246,7 @@ esp_outbound(struct rte_mbuf *m, struct ipsec_sa *sa,
return -EINVAL;
}
- padding = rte_pktmbuf_append(m, pad_len + sa->digest_len);
+ padding = (uint8_t *)rte_pktmbuf_append(m, pad_len + sa->digest_len);
if (unlikely(padding == NULL)) {
RTE_LOG(ERR, IPSEC_ESP, "not enough mbuf trailing space\n");
return -ENOSPC;
@@ -218,10 +264,20 @@ esp_outbound(struct rte_mbuf *m, struct ipsec_sa *sa,
&sa->src, &sa->dst);
esp = (struct esp_hdr *)(ip6 + 1);
break;
- default:
- RTE_LOG(ERR, IPSEC_ESP, "Unsupported SA flags: 0x%x\n",
- sa->flags);
- return -EINVAL;
+ case TRANSPORT:
+ new_ip = (uint8_t *)rte_pktmbuf_prepend(m,
+ sizeof(struct esp_hdr) + sa->iv_len);
+ memmove(new_ip, ip4, ip_hdr_len);
+ esp = (struct esp_hdr *)(new_ip + ip_hdr_len);
+ if (likely(ip4->ip_v == IPVERSION)) {
+ ip4 = (struct ip *)new_ip;
+ ip4->ip_p = IPPROTO_ESP;
+ ip4->ip_len = htons(rte_pktmbuf_data_len(m));
+ } else {
+ ip6 = (struct ip6_hdr *)new_ip;
+ ip6->ip6_nxt = IPPROTO_ESP;
+ ip6->ip6_plen = htons(rte_pktmbuf_data_len(m));
+ }
}
sa->seq++;
@@ -235,11 +291,7 @@ esp_outbound(struct rte_mbuf *m, struct ipsec_sa *sa,
for (i = 0; i < pad_len - 2; i++)
padding[i] = i + 1;
padding[pad_len - 2] = pad_len - 2;
-
- if (RTE_ETH_IS_IPV4_HDR(m->packet_type))
- padding[pad_len - 1] = IPPROTO_IPIP;
- else
- padding[pad_len - 1] = IPPROTO_IPV6;
+ padding[pad_len - 1] = nlp;
sym_cop = (struct rte_crypto_sym_op *)(cop + 1);
diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
index 83d7b1c..0d2ee25 100644
--- a/examples/ipsec-secgw/ipsec.h
+++ b/examples/ipsec-secgw/ipsec.h
@@ -103,6 +103,7 @@ struct ipsec_sa {
uint16_t flags;
#define IP4_TUNNEL (1 << 0)
#define IP6_TUNNEL (1 << 1)
+#define TRANSPORT (1 << 2)
struct ip_addr src;
struct ip_addr dst;
struct rte_crypto_sym_xform *xforms;
diff --git a/examples/ipsec-secgw/rt.c b/examples/ipsec-secgw/rt.c
index d46df49..fa5f042 100644
--- a/examples/ipsec-secgw/rt.c
+++ b/examples/ipsec-secgw/rt.c
@@ -62,6 +62,9 @@ static struct ip4_route rt_ip4_ep0[] = {
/* Tunnels */
{ IPv4(172, 16, 2, 5), 32, 0 },
{ IPv4(172, 16, 2, 6), 32, 1 },
+ /* Transport */
+ { IPv4(192, 168, 175, 0), 24, 0 },
+ { IPv4(192, 168, 176, 0), 24, 1 },
/* Bypass */
{ IPv4(192, 168, 240, 0), 24, 0 },
{ IPv4(192, 168, 241, 0), 24, 1 },
@@ -72,6 +75,9 @@ static struct ip4_route rt_ip4_ep0[] = {
{ IPv4(192, 168, 116, 0), 24, 3 },
{ IPv4(192, 168, 65, 0), 24, 2 },
{ IPv4(192, 168, 66, 0), 24, 3 },
+ /* Transport */
+ { IPv4(192, 168, 185, 0), 24, 2 },
+ { IPv4(192, 168, 186, 0), 24, 3 },
/* NULL */
{ IPv4(192, 168, 210, 0), 24, 2 },
{ IPv4(192, 168, 211, 0), 24, 3 },
@@ -87,6 +93,11 @@ static struct ip6_route rt_ip6_ep0[] = {
0x22, 0x22, 0x22, 0x22, 0x22, 0x55, 0x55 }, 116, 0 },
{ { 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
0x22, 0x22, 0x22, 0x22, 0x22, 0x66, 0x66 }, 116, 1 },
+ /* Transport */
+ { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 0 },
+ { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
+ 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 1 },
/* Inbound */
/* Tunnels */
{ { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xaa,
@@ -97,6 +108,11 @@ static struct ip6_route rt_ip6_ep0[] = {
0x55, 0x55, 0x55, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
{ { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66,
0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
+ /* Transport */
+ { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
+ { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
+ 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
};
static struct ip4_route rt_ip4_ep1[] = {
@@ -104,6 +120,9 @@ static struct ip4_route rt_ip4_ep1[] = {
/* Tunnels */
{ IPv4(172, 16, 1, 5), 32, 0 },
{ IPv4(172, 16, 1, 6), 32, 1 },
+ /* Transport */
+ { IPv4(192, 168, 185, 0), 24, 0 },
+ { IPv4(192, 168, 186, 0), 24, 1 },
/* Bypass */
{ IPv4(192, 168, 245, 0), 24, 0 },
{ IPv4(192, 168, 246, 0), 24, 1 },
@@ -114,6 +133,9 @@ static struct ip4_route rt_ip4_ep1[] = {
{ IPv4(192, 168, 106, 0), 24, 3 },
{ IPv4(192, 168, 55, 0), 24, 2 },
{ IPv4(192, 168, 56, 0), 24, 3 },
+ /* Transport */
+ { IPv4(192, 168, 175, 0), 24, 2 },
+ { IPv4(192, 168, 176, 0), 24, 3 },
/* NULL */
{ IPv4(192, 168, 200, 0), 24, 2 },
{ IPv4(192, 168, 201, 0), 24, 3 },
@@ -129,6 +151,11 @@ static struct ip6_route rt_ip6_ep1[] = {
0x11, 0x11, 0x11, 0x11, 0x11, 0x55, 0x55 }, 116, 0 },
{ { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
0x11, 0x11, 0x11, 0x11, 0x11, 0x66, 0x66 }, 116, 1 },
+ /* Transport */
+ { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 0 },
+ { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
+ 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 1 },
/* Inbound */
/* Tunnels */
@@ -140,6 +167,11 @@ static struct ip6_route rt_ip6_ep1[] = {
0x55, 0x55, 0x55, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
{ { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66,
0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
+ /* Transport */
+ { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
+ { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
+ 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
};
void
diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
index 8b54beb..ab18b81 100644
--- a/examples/ipsec-secgw/sa.c
+++ b/examples/ipsec-secgw/sa.c
@@ -74,6 +74,24 @@ const struct ipsec_sa sa_out[] = {
.flags = IP4_TUNNEL
},
{
+ .spi = 10,
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ .flags = TRANSPORT
+ },
+ {
+ .spi = 11,
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ .flags = TRANSPORT
+ },
+ {
.spi = 15,
.src.ip4 = IPv4(172, 16, 1, 5),
.dst.ip4 = IPv4(172, 16, 2, 5),
@@ -148,6 +166,24 @@ const struct ipsec_sa sa_in[] = {
.flags = IP4_TUNNEL
},
{
+ .spi = 110,
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ .flags = TRANSPORT
+ },
+ {
+ .spi = 111,
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ .flags = TRANSPORT
+ },
+ {
.spi = 115,
.src.ip4 = IPv4(172, 16, 2, 5),
.dst.ip4 = IPv4(172, 16, 1, 5),
@@ -447,6 +483,9 @@ single_inbound_lookup(struct ipsec_sa *sadb, struct rte_mbuf *pkt,
!memcmp(&sa->src.ip6, src6_addr, 16) &&
!memcmp(&sa->dst.ip6, src6_addr + 16, 16))
*sa_ret = sa;
+ break;
+ case TRANSPORT:
+ *sa_ret = sa;
}
}
diff --git a/examples/ipsec-secgw/sp4.c b/examples/ipsec-secgw/sp4.c
index 61720c8..9c4b256 100644
--- a/examples/ipsec-secgw/sp4.c
+++ b/examples/ipsec-secgw/sp4.c
@@ -135,6 +135,26 @@ const struct acl4_rules acl4_rules_out[] = {
.field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
},
{
+ .data = {.userdata = PROTECT(10), .category_mask = 1, .priority = 1},
+ /* destination IPv4 */
+ .field[2] = {.value.u32 = IPv4(192, 168, 175, 0),
+ .mask_range.u32 = 24,},
+ /* source port */
+ .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
+ .data = {.userdata = PROTECT(11), .category_mask = 1, .priority = 1},
+ /* destination IPv4 */
+ .field[2] = {.value.u32 = IPv4(192, 168, 176, 0),
+ .mask_range.u32 = 24,},
+ /* source port */
+ .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
.data = {.userdata = PROTECT(15), .category_mask = 1, .priority = 1},
/* destination IPv4 */
.field[2] = {.value.u32 = IPv4(192, 168, 200, 0),
@@ -218,6 +238,26 @@ const struct acl4_rules acl4_rules_in[] = {
.field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
},
{
+ .data = {.userdata = PROTECT(110), .category_mask = 1, .priority = 1},
+ /* destination IPv4 */
+ .field[2] = {.value.u32 = IPv4(192, 168, 185, 0),
+ .mask_range.u32 = 24,},
+ /* source port */
+ .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
+ .data = {.userdata = PROTECT(111), .category_mask = 1, .priority = 1},
+ /* destination IPv4 */
+ .field[2] = {.value.u32 = IPv4(192, 168, 186, 0),
+ .mask_range.u32 = 24,},
+ /* source port */
+ .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
.data = {.userdata = PROTECT(115), .category_mask = 1, .priority = 1},
/* destination IPv4 */
.field[2] = {.value.u32 = IPv4(192, 168, 210, 0),
diff --git a/examples/ipsec-secgw/sp6.c b/examples/ipsec-secgw/sp6.c
index c6fb851..1dda11a 100644
--- a/examples/ipsec-secgw/sp6.c
+++ b/examples/ipsec-secgw/sp6.c
@@ -170,6 +170,30 @@ const struct acl6_rules acl6_rules_out[] = {
.field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
},
{
+ .data = {.userdata = PROTECT(10), .category_mask = 1, .priority = 1},
+ /* destination IPv6 */
+ .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
+ .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
+ .field[7] = {.value.u32 = 0x00000000, .mask_range.u32 = 32,},
+ .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
+ /* source port */
+ .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
+ .data = {.userdata = PROTECT(11), .category_mask = 1, .priority = 1},
+ /* destination IPv6 */
+ .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
+ .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
+ .field[7] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
+ .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
+ /* source port */
+ .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
.data = {.userdata = PROTECT(25), .category_mask = 1, .priority = 1},
/* destination IPv6 */
.field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
@@ -221,6 +245,30 @@ const struct acl6_rules acl6_rules_in[] = {
.field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
},
{
+ .data = {.userdata = PROTECT(110), .category_mask = 1, .priority = 1},
+ /* destination IPv6 */
+ .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
+ .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
+ .field[7] = {.value.u32 = 0x00000000, .mask_range.u32 = 32,},
+ .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
+ /* source port */
+ .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
+ .data = {.userdata = PROTECT(111), .category_mask = 1, .priority = 1},
+ /* destination IPv6 */
+ .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
+ .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
+ .field[7] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
+ .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
+ /* source port */
+ .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
+ /* destination port */
+ .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ },
+ {
.data = {.userdata = PROTECT(125), .category_mask = 1, .priority = 1},
/* destination IPv6 */
.field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
--
2.5.5
next prev parent reply other threads:[~2016-06-09 8:43 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 16:31 [dpdk-dev] [PATCH 0/9] IPSec example enhancements Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 1/9] examples/ipsec-secgw: fix esp padding check Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 2/9] examples/ipsec-secgw: fix stack smashing error Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 3/9] examples/ipsec-secgw: add build option and cleanup Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 4/9] examples/ipsec-secgw: rework ipsec execution loop Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 5/9] examples/ipsec-secgw: fix no sa found case Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 6/9] examples/ipsec-secgw: consistent config variable names Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 7/9] examples/ipsec-secgw: ipv6 support Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 8/9] examples/ipsec-secgw: transport mode support Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 9/9] doc: update ipsec sample guide Sergio Gonzalez Monroy
2016-05-10 9:21 ` Mcnamara, John
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 0/9] IPSec enhancements Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 1/9] examples/ipsec-secgw: fix esp padding check Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 2/9] examples/ipsec-secgw: fix stack smashing error Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 3/9] examples/ipsec-secgw: add build option and cleanup Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 4/9] examples/ipsec-secgw: rework ipsec execution loop Sergio Gonzalez Monroy
2016-06-07 12:50 ` De Lara Guarch, Pablo
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 5/9] examples/ipsec-secgw: fix no sa found case Sergio Gonzalez Monroy
2016-06-07 13:17 ` De Lara Guarch, Pablo
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 6/9] examples/ipsec-secgw: consistent config variable names Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 7/9] examples/ipsec-secgw: ipv6 support Sergio Gonzalez Monroy
2016-06-07 16:10 ` De Lara Guarch, Pablo
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 8/9] examples/ipsec-secgw: transport mode support Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 9/9] doc: update ipsec sample guide Sergio Gonzalez Monroy
2016-05-18 13:43 ` Mcnamara, John
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 0/9] IPSec Enhancements Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 1/9] examples/ipsec-secgw: fix esp padding check Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 2/9] examples/ipsec-secgw: fix stack smashing error Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 3/9] examples/ipsec-secgw: add build option and cleanup Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 4/9] examples/ipsec-secgw: rework ipsec execution loop Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 5/9] examples/ipsec-secgw: fix no sa found case Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 6/9] examples/ipsec-secgw: consistent config variable names Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 7/9] examples/ipsec-secgw: ipv6 support Sergio Gonzalez Monroy
2016-06-09 8:42 ` Sergio Gonzalez Monroy [this message]
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 9/9] doc: update ipsec sample guide Sergio Gonzalez Monroy
2016-06-09 11:11 ` Mcnamara, John
2016-06-09 11:58 ` [dpdk-dev] [PATCH v3 0/9] IPSec Enhancements De Lara Guarch, Pablo
2016-06-21 10:14 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465461770-42233-9-git-send-email-sergio.gonzalez.monroy@intel.com \
--to=sergio.gonzalez.monroy@intel.com \
--cc=dev@dpdk.org \
--cc=john.mcnamara@intel.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).