[dpdk-dev] [PATCH v2 04/16] vfio: move vfio_iommu_type and dma_map functions to eal_vfio

[Jan Viktorin <viktorin@rehivetech.com>]

We make the iommu_types public temporarily here until the depending stuff is
refactored. The iommu_types and dma_map functions will be changed to be private
inside the eal_vfio module later.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
---
 lib/librte_eal/linuxapp/eal/Makefile       |  1 +
 lib/librte_eal/linuxapp/eal/eal_pci_vfio.c | 62 -----------------------
 lib/librte_eal/linuxapp/eal/eal_vfio.c     | 79 ++++++++++++++++++++++++++++++
 lib/librte_eal/linuxapp/eal/eal_vfio.h     | 23 +++++++++
 4 files changed, 103 insertions(+), 62 deletions(-)
 create mode 100644 lib/librte_eal/linuxapp/eal/eal_vfio.c

diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile
index 30b30f3..517554f 100644
--- a/lib/librte_eal/linuxapp/eal/Makefile
+++ b/lib/librte_eal/linuxapp/eal/Makefile
@@ -66,6 +66,7 @@ SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_xen_memory.c
 endif
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_thread.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_log.c
+SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_vfio.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_pci.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_pci_uio.c
 SRCS-$(CONFIG_RTE_EXEC_ENV_LINUXAPP) += eal_pci_vfio.c
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
index d29b7f1..cfa26ee 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_vfio.c
@@ -72,68 +72,6 @@ EAL_REGISTER_TAILQ(rte_vfio_tailq)
 /* per-process VFIO config */
 static struct vfio_config vfio_cfg;
 
-/* DMA mapping function prototype.
- * Takes VFIO container fd as a parameter.
- * Returns 0 on success, -1 on error.
- * */
-typedef int (*vfio_dma_func_t)(int);
-
-struct vfio_iommu_type {
-	int type_id;
-	const char *name;
-	vfio_dma_func_t dma_map_func;
-};
-
-static int vfio_type1_dma_map(int);
-static int vfio_noiommu_dma_map(int);
-
-/* IOMMU types we support */
-static const struct vfio_iommu_type iommu_types[] = {
-	/* x86 IOMMU, otherwise known as type 1 */
-	{ RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
-	/* IOMMU-less mode */
-	{ RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map},
-};
-
-int
-vfio_type1_dma_map(int vfio_container_fd)
-{
-	const struct rte_memseg *ms = rte_eal_get_physmem_layout();
-	int i, ret;
-
-	/* map all DPDK segments for DMA. use 1:1 PA to IOVA mapping */
-	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
-		struct vfio_iommu_type1_dma_map dma_map;
-
-		if (ms[i].addr == NULL)
-			break;
-
-		memset(&dma_map, 0, sizeof(dma_map));
-		dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map);
-		dma_map.vaddr = ms[i].addr_64;
-		dma_map.size = ms[i].len;
-		dma_map.iova = ms[i].phys_addr;
-		dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE;
-
-		ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA, &dma_map);
-
-		if (ret) {
-			RTE_LOG(ERR, EAL, "  cannot set up DMA remapping, "
-					"error %i (%s)\n", errno, strerror(errno));
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-int
-vfio_noiommu_dma_map(int __rte_unused vfio_container_fd)
-{
-	/* No-IOMMU mode does not need DMA mapping */
-	return 0;
-}
-
 int
 pci_vfio_read_config(const struct rte_intr_handle *intr_handle,
 		    void *buf, size_t len, off_t offs)
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c
new file mode 100644
index 0000000..d3ffebe
--- /dev/null
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c
@@ -0,0 +1,79 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <sys/ioctl.h>
+
+#include <rte_log.h>
+#include <rte_memory.h>
+
+#include "eal_vfio.h"
+
+int
+vfio_type1_dma_map(int vfio_container_fd)
+{
+	const struct rte_memseg *ms = rte_eal_get_physmem_layout();
+	int i, ret;
+
+	/* map all DPDK segments for DMA. use 1:1 PA to IOVA mapping */
+	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
+		struct vfio_iommu_type1_dma_map dma_map;
+
+		if (ms[i].addr == NULL)
+			break;
+
+		memset(&dma_map, 0, sizeof(dma_map));
+		dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map);
+		dma_map.vaddr = ms[i].addr_64;
+		dma_map.size = ms[i].len;
+		dma_map.iova = ms[i].phys_addr;
+		dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE;
+
+		ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA, &dma_map);
+
+		if (ret) {
+			RTE_LOG(ERR, EAL, "  cannot set up DMA remapping, "
+					"error %i (%s)\n", errno, strerror(errno));
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+int
+vfio_noiommu_dma_map(int __rte_unused vfio_container_fd)
+{
+	/* No-IOMMU mode does not need DMA mapping */
+	return 0;
+}
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h
index bcf6860..c62f269 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
@@ -95,6 +95,29 @@ struct vfio_config {
 #define VFIO_GET_REGION_ADDR(x) ((uint64_t) x << 40ULL)
 #define VFIO_GET_REGION_IDX(x) (x >> 40)
 
+/* DMA mapping function prototype.
+ * Takes VFIO container fd as a parameter.
+ * Returns 0 on success, -1 on error.
+ * */
+typedef int (*vfio_dma_func_t)(int);
+
+struct vfio_iommu_type {
+	int type_id;
+	const char *name;
+	vfio_dma_func_t dma_map_func;
+};
+
+int vfio_type1_dma_map(int);
+int vfio_noiommu_dma_map(int);
+
+/* IOMMU types we support */
+static const struct vfio_iommu_type iommu_types[] = {
+	/* x86 IOMMU, otherwise known as type 1 */
+	{ RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
+	/* IOMMU-less mode */
+	{ RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map},
+};
+
 #define VFIO_PRESENT
 #endif /* kernel version */
 #endif /* RTE_EAL_VFIO */
-- 
2.8.0