From: Robert Sanford <rsanford2@gmail.com>
To: dev@dpdk.org
Cc: declan.doherty@intel.com, pablo.de.lara.guarch@intel.com,
olivier.matz@6wind.com
Subject: [dpdk-dev] [PATCH 1/4] testpmd: fix LACP ports to work with idle links
Date: Mon, 1 Aug 2016 16:42:53 -0400 [thread overview]
Message-ID: <1470084176-79932-2-git-send-email-rsanford@akamai.com> (raw)
In-Reply-To: <1470084176-79932-1-git-send-email-rsanford@akamai.com>
Problem: When there is little or no TX traffic on an LACP port
(bonding mode 4), we don't call its tx burst function in a timely
manner, and thus we don't transmit LACPDUs when we should.
Solution: Add and maintain an "lacp_master" flag in rte_port struct.
In the main packet forwarding loop, if port is an LACP master, in 1
out of N loops force an empty call to the tx burst API.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
---
app/test-pmd/cmdline.c | 9 +++++++++
app/test-pmd/testpmd.c | 37 +++++++++++++++++++++++++++++++++++++
app/test-pmd/testpmd.h | 4 ++++
3 files changed, 50 insertions(+), 0 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index f90befc..2a629ee 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -3975,6 +3975,10 @@ static void cmd_set_bonding_mode_parsed(void *parsed_result,
/* Set the bonding mode for the relevant port. */
if (0 != rte_eth_bond_mode_set(port_id, res->value))
printf("\t Failed to set bonding mode for port = %d.\n", port_id);
+ else if (res->value == BONDING_MODE_8023AD)
+ set_port_lacp_master(port_id);
+ else
+ clear_port_lacp_master(port_id);
}
cmdline_parse_token_string_t cmd_setbonding_mode_set =
@@ -4408,6 +4412,11 @@ static void cmd_create_bonded_device_parsed(void *parsed_result,
reconfig(port_id, res->socket);
rte_eth_promiscuous_enable(port_id);
ports[port_id].enabled = 1;
+
+ if (res->mode == BONDING_MODE_8023AD)
+ set_port_lacp_master(port_id);
+ else
+ clear_port_lacp_master(port_id);
}
}
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 1428974..806667e 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -920,12 +920,28 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
struct fwd_stream **fsm;
streamid_t nb_fs;
streamid_t sm_id;
+ unsigned int loop_count = 0;
fsm = &fwd_streams[fc->stream_idx];
nb_fs = fc->stream_nb;
do {
for (sm_id = 0; sm_id < nb_fs; sm_id++)
(*pkt_fwd)(fsm[sm_id]);
+
+ /*
+ * Per rte_eth_bond.h, we must invoke LACP master's tx
+ * burst function at least once every 100 ms.
+ */
+ loop_count++;
+ if (likely(loop_count % 1024 != 0))
+ continue;
+ for (sm_id = 0; sm_id < nb_fs; sm_id++) {
+ struct fwd_stream *fs = fsm[sm_id];
+
+ if (port_is_lacp_master(fs->tx_port))
+ rte_eth_tx_burst(fs->tx_port, fs->tx_queue,
+ NULL, 0);
+ }
} while (! fc->stopped);
}
@@ -1881,6 +1897,27 @@ uint8_t port_is_bonding_slave(portid_t slave_pid)
return port->slave_flag;
}
+void set_port_lacp_master(portid_t pid)
+{
+ struct rte_port *port = &ports[pid];
+
+ port->lacp_master = 1;
+}
+
+void clear_port_lacp_master(portid_t pid)
+{
+ struct rte_port *port = &ports[pid];
+
+ port->lacp_master = 0;
+}
+
+uint8_t port_is_lacp_master(portid_t pid)
+{
+ struct rte_port *port = &ports[pid];
+
+ return port->lacp_master;
+}
+
const uint16_t vlan_tags[] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 2b281cc..0898194 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -170,6 +170,7 @@ struct rte_port {
struct ether_addr *mc_addr_pool; /**< pool of multicast addrs */
uint32_t mc_addr_nb; /**< nb. of addr. in mc_addr_pool */
uint8_t slave_flag; /**< bonding slave port */
+ uint8_t lacp_master;/**< bonding LACP master */
};
extern portid_t __rte_unused
@@ -542,6 +543,9 @@ void init_port_config(void);
void set_port_slave_flag(portid_t slave_pid);
void clear_port_slave_flag(portid_t slave_pid);
uint8_t port_is_bonding_slave(portid_t slave_pid);
+void set_port_lacp_master(portid_t pid);
+void clear_port_lacp_master(portid_t pid);
+uint8_t port_is_lacp_master(portid_t pid);
int init_port_dcb_config(portid_t pid, enum dcb_mode_enable dcb_mode,
enum rte_eth_nb_tcs num_tcs,
--
1.7.1
next prev parent reply other threads:[~2016-08-01 20:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-01 20:42 [dpdk-dev] [PATCH 0/4] net/bonding: bonding and LACP fixes Robert Sanford
2016-08-01 20:42 ` Robert Sanford [this message]
2017-06-22 1:25 ` [dpdk-dev] [PATCH 1/4] testpmd: fix LACP ports to work with idle links Wu, Jingjing
2017-10-31 1:07 ` Ferruh Yigit
2017-11-01 20:06 ` Ferruh Yigit
2016-08-01 20:42 ` [dpdk-dev] [PATCH 2/4] mempool: make cache flush threshold macro public Robert Sanford
2016-08-23 15:09 ` Olivier MATZ
2016-08-23 16:07 ` Sanford, Robert
2016-08-24 16:15 ` Olivier MATZ
2016-08-01 20:42 ` [dpdk-dev] [PATCH 3/4] net/bonding: another fix to LACP mempool size Robert Sanford
2016-08-23 15:09 ` Olivier MATZ
2016-08-23 20:01 ` Sanford, Robert
2016-08-24 16:14 ` Olivier MATZ
2016-11-07 16:02 ` Kulasek, TomaszX
2016-08-01 20:42 ` [dpdk-dev] [PATCH 4/4] net/bonding: fix configuration of LACP slaves Robert Sanford
2016-11-07 16:03 ` Kulasek, TomaszX
2017-02-08 17:14 ` [dpdk-dev] [PATCH 0/4] net/bonding: bonding and LACP fixes Thomas Monjalon
2017-03-09 13:19 ` Thomas Monjalon
2017-03-09 16:57 ` Declan Doherty
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470084176-79932-2-git-send-email-rsanford@akamai.com \
--to=rsanford2@gmail.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=olivier.matz@6wind.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).