DPDK patches and discussions
 help / color / mirror / Atom feed
From: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
To: declan.doherty@intel.com, dev@dpdk.org
Cc: Marcin Kerlin <marcinx.kerlin@intel.com>,
	Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>,
	Michal Kobylinski <michalx.kobylinski@intel.com>,
	Tomasz Kulasek <tomaszx.kulasek@intel.com>,
	Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Subject: [dpdk-dev] [PATCH 1/4] libcrypto_pmd: initial implementation of SW crypto device
Date: Fri, 26 Aug 2016 09:21:54 +0200	[thread overview]
Message-ID: <1472196117-21750-2-git-send-email-piotrx.t.azarewicz@intel.com> (raw)
In-Reply-To: <1472196117-21750-1-git-send-email-piotrx.t.azarewicz@intel.com>

From: Marcin Kerlin <marcinx.kerlin@intel.com>

This code provides the initial implementation of the libcrypto
poll mode driver. All cryptography operations are using Openssl
library crypto API. Each algorithm uses EVP_ interface from
openssl API - which is recommended by Openssl maintainers.

LibCrypto PMD has support for:

Supported cipher algorithms:
RTE_CRYPTO_CIPHER_3DES_CBC
RTE_CRYPTO_CIPHER_AES_CBC
RTE_CRYPTO_CIPHER_AES_CTR
RTE_CRYPTO_CIPHER_3DES_CTR

Supported authentication algorithms:
RTE_CRYPTO_AUTH_AES_GMAC
RTE_CRYPTO_AUTH_MD5
RTE_CRYPTO_AUTH_SHA1
RTE_CRYPTO_AUTH_SHA224
RTE_CRYPTO_AUTH_SHA256
RTE_CRYPTO_AUTH_SHA384
RTE_CRYPTO_AUTH_SHA512
RTE_CRYPTO_AUTH_MD5_HMAC
RTE_CRYPTO_AUTH_SHA1_HMAC
RTE_CRYPTO_AUTH_SHA224_HMAC
RTE_CRYPTO_AUTH_SHA256_HMAC
RTE_CRYPTO_AUTH_SHA384_HMAC
RTE_CRYPTO_AUTH_SHA512_HMAC

Installation
------------
To compile libcrypto PMD It has to be enabled in the config/common_base
file and appropriate openssl packages have to be installed in the build
environment.

Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
---
 MAINTAINERS                                        |   4 +
 config/common_base                                 |   6 +
 doc/guides/cryptodevs/index.rst                    |   1 +
 doc/guides/cryptodevs/libcrypto.rst                | 109 +++
 drivers/crypto/Makefile                            |   1 +
 drivers/crypto/libcrypto/Makefile                  |  60 ++
 drivers/crypto/libcrypto/rte_libcrypto_pmd.c       | 936 +++++++++++++++++++++
 drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c   | 638 ++++++++++++++
 .../crypto/libcrypto/rte_libcrypto_pmd_private.h   | 189 +++++
 .../crypto/libcrypto/rte_pmd_libcrypto_version.map |   3 +
 mk/rte.app.mk                                      |   3 +-
 11 files changed, 1949 insertions(+), 1 deletion(-)
 create mode 100644 doc/guides/cryptodevs/libcrypto.rst
 create mode 100644 drivers/crypto/libcrypto/Makefile
 create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd.c
 create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c
 create mode 100644 drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h
 create mode 100644 drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index bc9aa02..9eeb841 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -431,6 +431,10 @@ M: Declan Doherty <declan.doherty@intel.com>
 F: drivers/crypto/null/
 F: doc/guides/cryptodevs/null.rst
 
+LibCrypto Crypto PMD
+M: Declan Doherty <declan.doherty@intel.com>
+F: drivers/crypto/libcrypto/
+F: doc/guides/cryptodevs/libcrypto.rst
 
 Packet processing
 -----------------
diff --git a/config/common_base b/config/common_base
index 7830535..42d28dd 100644
--- a/config/common_base
+++ b/config/common_base
@@ -376,6 +376,12 @@ CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
 CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
 
 #
+# Compile PMD for Software backed device
+#
+CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO_DEBUG=n
+
+#
 # Compile PMD for AESNI GCM device
 #
 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
index 9616de1..adb6e98c 100644
--- a/doc/guides/cryptodevs/index.rst
+++ b/doc/guides/cryptodevs/index.rst
@@ -39,6 +39,7 @@ Crypto Device Drivers
     aesni_mb
     aesni_gcm
     kasumi
+    libcrypto
     null
     snow3g
     qat
diff --git a/doc/guides/cryptodevs/libcrypto.rst b/doc/guides/cryptodevs/libcrypto.rst
new file mode 100644
index 0000000..1c3dd07
--- /dev/null
+++ b/doc/guides/cryptodevs/libcrypto.rst
@@ -0,0 +1,109 @@
+..  BSD LICENSE
+    Copyright(c) 2016 Intel Corporation. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+LibCrypto Crypto Poll Mode Driver
+============================================
+
+
+This code provides the initial implementation of the libcrypto poll mode
+driver All cryptography operations are using Openssl library crypto API.
+Each algorithm uses EVP_ interface from openssl API - which is recommended
+by Openssl maintainers.
+
+For more details about openssl library please visit openssl webpage:
+https://www.openssl.org/
+
+Features
+--------
+
+LibCrypto PMD has support for:
+
+Supported cipher algorithms:
+RTE_CRYPTO_CIPHER_3DES_CBC
+RTE_CRYPTO_CIPHER_AES_CBC
+RTE_CRYPTO_CIPHER_AES_CTR
+RTE_CRYPTO_CIPHER_3DES_CTR
+
+Supported authentication algorithms:
+RTE_CRYPTO_AUTH_AES_GMAC
+RTE_CRYPTO_AUTH_MD5
+RTE_CRYPTO_AUTH_SHA1
+RTE_CRYPTO_AUTH_SHA224
+RTE_CRYPTO_AUTH_SHA256
+RTE_CRYPTO_AUTH_SHA384
+RTE_CRYPTO_AUTH_SHA512
+RTE_CRYPTO_AUTH_MD5_HMAC
+RTE_CRYPTO_AUTH_SHA1_HMAC
+RTE_CRYPTO_AUTH_SHA224_HMAC
+RTE_CRYPTO_AUTH_SHA256_HMAC
+RTE_CRYPTO_AUTH_SHA384_HMAC
+RTE_CRYPTO_AUTH_SHA512_HMAC
+
+
+Installation
+------------
+To compile libcrypto PMD It has to be enabled in the config/common_base file
+and appropriate openssl packages have to be installed in the build environment.
+
+The newest openssl library version is supported:
+* 1.0.2h-fips  3 May 2016.
+Older versions that were also verified:
+* 1.0.1f 6 Jan 2014
+* 1.0.1 14 Mar 2012
+
+For Ubuntu 14.04 LTS these packages have to be installed in the build system:
+sudo apt-get install openssl
+sudo apt-get install libc6-dev-i386 (for i686-native-linuxapp-gcc target)
+
+This code was also verified on Fedora 24.
+This code was NOT yet verified on FreeBSD.
+
+Initialization
+--------------
+
+User can use app/test application to check how to use this pmd and to verify
+crypto processing.
+
+Test name is cryptodev_libcrypto_autotest.
+For performance test cryptodev_libcrypto_perftest can be used.
+
+To verify real traffic l2fwd-crypto example can be used with this command:
+sudo ./build/l2fwd-crypto -c 0x3 -n 4 --vdev "cryptodev_libcrypto_pmd"
+--vdev "cryptodev_libcrypto_pmd"-- -p 0x3 --chain CIPHER_HASH
+--cipher_op ENCRYPT --cipher_algo AES_CBC
+--cipher_key 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f
+--iv 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff
+--auth_op GENERATE --auth_algo SHA1_HMAC
+--auth_key 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11
+
+Limitations
+-----------
+Maximum number of sessions is 2048.
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index dc4ef7f..11b0863 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -33,6 +33,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
 
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM) += aesni_gcm
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB) += aesni_mb
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += libcrypto
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_QAT) += qat
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G) += snow3g
 DIRS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI) += kasumi
diff --git a/drivers/crypto/libcrypto/Makefile b/drivers/crypto/libcrypto/Makefile
new file mode 100644
index 0000000..c5f8cf2
--- /dev/null
+++ b/drivers/crypto/libcrypto/Makefile
@@ -0,0 +1,60 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_pmd_libcrypto.a
+
+# build flags
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_libcrypto_version.map
+
+# external library dependencies
+LDLIBS += -lcrypto
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += rte_libcrypto_pmd.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += rte_libcrypto_pmd_ops.c
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_mempool
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_ring
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO) += lib/librte_cryptodev
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/libcrypto/rte_libcrypto_pmd.c b/drivers/crypto/libcrypto/rte_libcrypto_pmd.c
new file mode 100644
index 0000000..cfc5922
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_libcrypto_pmd.c
@@ -0,0 +1,936 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_hexdump.h>
+#include <rte_cryptodev.h>
+#include <rte_cryptodev_pmd.h>
+#include <rte_dev.h>
+#include <rte_malloc.h>
+#include <rte_cpuflags.h>
+
+#include <openssl/evp.h>
+
+#include "rte_libcrypto_pmd_private.h"
+
+static int cryptodev_libcrypto_uninit(const char *name);
+
+/*----------------------------------------------------------------------------*/
+
+/**
+ * Global static parameter used to create a unique name for each
+ * LIBCRYPTO crypto device.
+ */
+static unsigned int unique_name_id;
+
+static inline int
+create_unique_device_name(char *name, size_t size)
+{
+	int ret;
+
+	if (name == NULL)
+		return -EINVAL;
+
+	ret = snprintf(name, size, "%s_%u", RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD),
+			unique_name_id++);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+/**
+ * Increment counter by 1
+ * Counter is 64 bit array, big-endian
+ */
+static void
+ctr_inc(uint8_t *ctr)
+{
+	uint64_t *ctr64 = (uint64_t *)ctr;
+
+	*ctr64 = __builtin_bswap64(*ctr64);
+	(*ctr64)++;
+	*ctr64 = __builtin_bswap64(*ctr64);
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * Session Prepare
+ *------------------------------------------------------------------------------
+ */
+
+/** Get xform chain order */
+static enum libcrypto_chain_order
+libcrypto_get_chain_order(const struct rte_crypto_sym_xform *xform)
+{
+	enum libcrypto_chain_order res = LIBCRYPTO_CHAIN_NOT_SUPPORTED;
+
+	if (xform != NULL) {
+		if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+			if (xform->next == NULL)
+				res =  LIBCRYPTO_CHAIN_ONLY_AUTH;
+			else if (xform->next->type ==
+					RTE_CRYPTO_SYM_XFORM_CIPHER)
+				res =  LIBCRYPTO_CHAIN_AUTH_CIPHER;
+		}
+		if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
+			if (xform->next == NULL)
+				res =  LIBCRYPTO_CHAIN_ONLY_CIPHER;
+			else if (xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+				res =  LIBCRYPTO_CHAIN_CIPHER_AUTH;
+		}
+	}
+
+	return res;
+}
+
+/** Get key ede 24 bytes standard from input key */
+static int
+get_cipher_key_ede(uint8_t *key, int keylen, uint8_t *key_ede)
+{
+	int res = 0;
+
+	/* Initialize keys - 24 bytes: [key1-key2-key3] */
+	switch (keylen) {
+	case 24:
+		memcpy(key_ede, key, 24);
+		break;
+	case 16:
+		/* K3 = K1 */
+		memcpy(key_ede, key, 16);
+		memcpy(key_ede + 16, key, 8);
+		break;
+	case 8:
+		/* K1 = K2 = K3 (DES compatibility) */
+		memcpy(key_ede, key, 8);
+		memcpy(key_ede + 8, key, 8);
+		memcpy(key_ede + 16, key, 8);
+		break;
+	default:
+		LIBCRYPTO_LOG_ERR("Unsupported key size");
+		res = -EINVAL;
+	}
+
+	return res;
+}
+
+/** Get adequate libcrypto function for input cipher algorithm */
+static uint8_t
+get_cipher_algo(enum rte_crypto_cipher_algorithm sess_algo, size_t keylen,
+		const EVP_CIPHER **algo)
+{
+	int res = 0;
+
+	if (algo != NULL) {
+		switch (sess_algo) {
+		case RTE_CRYPTO_CIPHER_3DES_CBC:
+			switch (keylen) {
+			case 16:
+				*algo = EVP_des_ede_cbc();
+				break;
+			case 24:
+				*algo = EVP_des_ede3_cbc();
+				break;
+			default:
+				res = -EINVAL;
+			}
+			break;
+		case RTE_CRYPTO_CIPHER_3DES_CTR:
+			break;
+		case RTE_CRYPTO_CIPHER_AES_CBC:
+			switch (keylen) {
+			case 16:
+				*algo = EVP_aes_128_cbc();
+				break;
+			case 24:
+				*algo = EVP_aes_192_cbc();
+				break;
+			case 32:
+				*algo = EVP_aes_256_cbc();
+				break;
+			default:
+				res = -EINVAL;
+			}
+			break;
+		case RTE_CRYPTO_CIPHER_AES_CTR:
+			switch (keylen) {
+			case 16:
+				*algo = EVP_aes_128_ctr();
+				break;
+			case 24:
+				*algo = EVP_aes_192_ctr();
+				break;
+			case 32:
+				*algo = EVP_aes_256_ctr();
+				break;
+			default:
+				res = -EINVAL;
+			}
+			break;
+		case RTE_CRYPTO_CIPHER_AES_GCM:
+			switch (keylen) {
+			case 16:
+				*algo = EVP_aes_128_gcm();
+				break;
+			case 24:
+				*algo = EVP_aes_192_gcm();
+				break;
+			case 32:
+				*algo = EVP_aes_256_gcm();
+				break;
+			default:
+				res = -EINVAL;
+			}
+			break;
+		default:
+			res = -EINVAL;
+			break;
+		}
+	} else {
+		res = -EINVAL;
+	}
+
+	return res;
+}
+
+/** Get adequate libcrypto function for input auth algorithm */
+static uint8_t
+get_auth_algo(enum rte_crypto_auth_algorithm sessalgo,
+		const EVP_MD **algo)
+{
+	int res = 0;
+
+	if (algo != NULL) {
+		switch (sessalgo) {
+		case RTE_CRYPTO_AUTH_MD5:
+		case RTE_CRYPTO_AUTH_MD5_HMAC:
+			*algo = EVP_md5();
+			break;
+		case RTE_CRYPTO_AUTH_SHA1:
+		case RTE_CRYPTO_AUTH_SHA1_HMAC:
+			*algo = EVP_sha1();
+			break;
+		case RTE_CRYPTO_AUTH_SHA224:
+		case RTE_CRYPTO_AUTH_SHA224_HMAC:
+			*algo = EVP_sha224();
+			break;
+		case RTE_CRYPTO_AUTH_SHA256:
+		case RTE_CRYPTO_AUTH_SHA256_HMAC:
+			*algo = EVP_sha256();
+			break;
+		case RTE_CRYPTO_AUTH_SHA384:
+		case RTE_CRYPTO_AUTH_SHA384_HMAC:
+			*algo = EVP_sha384();
+			break;
+		case RTE_CRYPTO_AUTH_SHA512:
+		case RTE_CRYPTO_AUTH_SHA512_HMAC:
+			*algo = EVP_sha512();
+			break;
+		default:
+			res = -EINVAL;
+			break;
+		}
+	} else {
+		res = -EINVAL;
+	}
+
+	return res;
+}
+
+/** Set session cipher parameters */
+static int
+libcrypto_set_session_cipher_parameters(struct libcrypto_session *sess,
+		const struct rte_crypto_sym_xform *xform)
+{
+	/* Select cipher direction */
+	sess->cipher.direction = xform->cipher.op;
+	/* Select cipher key */
+	sess->cipher.key.length = xform->cipher.key.length;
+	sess->cipher.key.data = xform->cipher.key.data;
+
+	/* Select cipher algo */
+	switch (xform->cipher.algo) {
+	case RTE_CRYPTO_CIPHER_3DES_CBC:
+	case RTE_CRYPTO_CIPHER_AES_CBC:
+	case RTE_CRYPTO_CIPHER_AES_CTR:
+		sess->cipher.mode = LIBCRYPTO_CIPHER_LIB;
+		sess->cipher.algo = xform->cipher.algo;
+		sess->cipher.ctx = EVP_CIPHER_CTX_new();
+
+		if (get_cipher_algo(sess->cipher.algo, sess->cipher.key.length,
+				&sess->cipher.evp_algo) != 0)
+			return -EINVAL;
+
+		break;
+
+	case RTE_CRYPTO_CIPHER_3DES_CTR:
+		sess->cipher.mode = LIBCRYPTO_CIPHER_DES3CTR;
+		sess->cipher.ctx = EVP_CIPHER_CTX_new();
+
+		if (get_cipher_key_ede(sess->cipher.key.data,
+				sess->cipher.key.length, sess->cipher.key_ede) != 0)
+			return -EINVAL;
+		break;
+
+	default:
+		sess->cipher.algo = RTE_CRYPTO_CIPHER_NULL;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Set session auth parameters */
+static int
+libcrypto_set_session_auth_parameters(struct libcrypto_session *sess,
+		const struct rte_crypto_sym_xform *xform)
+{
+	/* Select auth generate/verify */
+	sess->auth.operation = xform->auth.op;
+
+	/* Select auth algo */
+	switch (xform->auth.algo) {
+	case RTE_CRYPTO_AUTH_AES_GMAC:
+		sess->auth.mode = LIBCRYPTO_AUTH_AS_CIPHER;
+		if (get_cipher_algo(RTE_CRYPTO_CIPHER_AES_GCM, xform->auth.key.length,
+				&sess->auth.cipher.evp_algo) != 0)
+			return -EINVAL;
+		sess->auth.cipher.key.data = xform->auth.key.data;
+		sess->auth.cipher.key.length = xform->auth.key.length;
+		sess->auth.cipher.ctx = EVP_CIPHER_CTX_new();
+		break;
+
+	case RTE_CRYPTO_AUTH_MD5:
+	case RTE_CRYPTO_AUTH_SHA1:
+	case RTE_CRYPTO_AUTH_SHA224:
+	case RTE_CRYPTO_AUTH_SHA256:
+	case RTE_CRYPTO_AUTH_SHA384:
+	case RTE_CRYPTO_AUTH_SHA512:
+		sess->auth.mode = LIBCRYPTO_AUTH_AS_AUTH;
+		if (get_auth_algo(xform->auth.algo, &sess->auth.auth.evp_algo) != 0)
+			return -EINVAL;
+		sess->auth.auth.ctx = EVP_MD_CTX_create();
+		break;
+
+	case RTE_CRYPTO_AUTH_MD5_HMAC:
+	case RTE_CRYPTO_AUTH_SHA1_HMAC:
+	case RTE_CRYPTO_AUTH_SHA224_HMAC:
+	case RTE_CRYPTO_AUTH_SHA256_HMAC:
+	case RTE_CRYPTO_AUTH_SHA384_HMAC:
+	case RTE_CRYPTO_AUTH_SHA512_HMAC:
+		sess->auth.mode = LIBCRYPTO_AUTH_AS_HMAC;
+		sess->auth.hmac.ctx = EVP_MD_CTX_create();
+		if (get_auth_algo(xform->auth.algo, &sess->auth.hmac.evp_algo) != 0)
+			return -EINVAL;
+		sess->auth.hmac.pkey = EVP_PKEY_new_mac_key(EVP_PKEY_HMAC, NULL,
+				xform->auth.key.data, xform->auth.key.length);
+		break;
+
+	default:
+		sess->auth.mode = LIBCRYPTO_AUTH_NULL;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/** Parse crypto xform chain and set private session parameters */
+int
+libcrypto_set_session_parameters(struct libcrypto_session *sess,
+		const struct rte_crypto_sym_xform *xform)
+{
+	const struct rte_crypto_sym_xform *cipher_xform = NULL;
+	const struct rte_crypto_sym_xform *auth_xform = NULL;
+
+	sess->chain_order = libcrypto_get_chain_order(xform);
+	switch (sess->chain_order) {
+	case LIBCRYPTO_CHAIN_ONLY_CIPHER:
+		cipher_xform = xform;
+		break;
+	case LIBCRYPTO_CHAIN_ONLY_AUTH:
+		auth_xform = xform;
+		break;
+	case LIBCRYPTO_CHAIN_CIPHER_AUTH:
+		cipher_xform = xform;
+		auth_xform = xform->next;
+		break;
+	case LIBCRYPTO_CHAIN_AUTH_CIPHER:
+		auth_xform = xform;
+		cipher_xform = xform->next;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (cipher_xform) {
+		if (libcrypto_set_session_cipher_parameters(sess, cipher_xform)) {
+			LIBCRYPTO_LOG_ERR(
+				"Invalid/unsupported cipher parameters");
+			return -EINVAL;
+		}
+	}
+
+	if (auth_xform) {
+		if (libcrypto_set_session_auth_parameters(sess, auth_xform)) {
+			LIBCRYPTO_LOG_ERR(
+				"Invalid/unsupported auth parameters");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/** Reset private session parameters */
+void
+libcrypto_reset_session(struct libcrypto_session *sess)
+{
+	EVP_CIPHER_CTX_free(sess->cipher.ctx);
+
+	switch (sess->auth.mode) {
+	case LIBCRYPTO_AUTH_AS_AUTH:
+		EVP_MD_CTX_destroy(sess->auth.auth.ctx);
+		break;
+	case LIBCRYPTO_AUTH_AS_HMAC:
+		EVP_MD_CTX_destroy(sess->auth.hmac.ctx);
+		break;
+	case LIBCRYPTO_AUTH_AS_CIPHER:
+		EVP_CIPHER_CTX_free(sess->auth.cipher.ctx);
+		break;
+	default:
+		break;
+	}
+}
+
+/** Provide session for operation */
+static struct libcrypto_session *
+get_session(struct libcrypto_qp *qp, struct rte_crypto_op *op)
+{
+	struct libcrypto_session *sess = NULL;
+
+	if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_WITH_SESSION) {
+		/* get existing session */
+		if (!unlikely(op->sym->session == NULL ||
+				op->sym->session->dev_type !=
+				RTE_CRYPTODEV_LIBCRYPTO_PMD))
+			sess = (struct libcrypto_session *)
+				op->sym->session->_private;
+	} else  {
+		/* provide internal session */
+		void *_sess = NULL;
+
+		if (!rte_mempool_get(qp->sess_mp, (void **)&_sess)) {
+			sess = (struct libcrypto_session *)
+				((struct rte_cryptodev_sym_session *)_sess)
+				->_private;
+
+			if (unlikely(libcrypto_set_session_parameters(
+					sess, op->sym->xform) != 0)) {
+				rte_mempool_put(qp->sess_mp, _sess);
+				sess = NULL;
+			} else
+				op->sym->session = _sess;
+		}
+	}
+
+	if (sess == NULL)
+		op->status = RTE_CRYPTO_OP_STATUS_INVALID_SESSION;
+
+	return sess;
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * Process Operations
+ *------------------------------------------------------------------------------
+ */
+
+/** Process standard libcrypto cipher encryption */
+static int
+process_libcrypto_cipher_encrypt(uint8_t *src, uint8_t *dst,
+		uint8_t *iv, uint8_t *key, int srclen,
+		EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+	int dstlen, totlen;
+
+	if (EVP_EncryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
+		goto process_cipher_encrypt_err;
+
+	if (EVP_EncryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
+		goto process_cipher_encrypt_err;
+
+	if (EVP_EncryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
+		goto process_cipher_encrypt_err;
+
+	return 0;
+
+process_cipher_encrypt_err:
+	LIBCRYPTO_LOG_ERR("Process libcrypto cipher encrypt failed");
+	return -EINVAL;
+}
+
+/** Process standard libcrypto cipher decryption */
+static int
+process_libcrypto_cipher_decrypt(uint8_t *src, uint8_t *dst,
+		uint8_t *iv, uint8_t *key, int srclen,
+		EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+	int dstlen, totlen;
+
+	if (EVP_DecryptInit_ex(ctx, algo, NULL, key, iv) <= 0)
+		goto process_cipher_decrypt_err;
+
+	if (EVP_CIPHER_CTX_set_padding(ctx, 0) <= 0)
+		goto process_cipher_decrypt_err;
+
+	if (EVP_DecryptUpdate(ctx, dst, &dstlen, src, srclen) <= 0)
+		goto process_cipher_decrypt_err;
+
+	if (EVP_DecryptFinal_ex(ctx, dst + dstlen, &totlen) <= 0)
+		goto process_cipher_decrypt_err;
+
+	return 0;
+
+process_cipher_decrypt_err:
+	LIBCRYPTO_LOG_ERR("Process libcrypto cipher decrypt failed");
+	return -EINVAL;
+}
+
+/** Process cipher des 3 ctr encryption, decryption algorithm */
+static int
+process_libcrypto_cipher_des3ctr(uint8_t *src, uint8_t *dst,
+		uint8_t *iv, uint8_t *key, int srclen, EVP_CIPHER_CTX *ctx)
+{
+	uint8_t ebuf[8], ctr[8];
+	int unused, n;
+
+	/* We use 3DES encryption also for decryption.
+	 * IV is not important for 3DES ecb
+	 */
+	if (EVP_EncryptInit_ex(ctx, EVP_des_ede3_ecb(), NULL, key, NULL) <= 0)
+		goto process_cipher_des3ctr_err;
+
+	memcpy(ctr, iv, 8);
+	n = 0;
+
+	while (n < srclen) {
+		if (n % 8 == 0) {
+			if (EVP_EncryptUpdate(ctx, (unsigned char *)&ebuf, &unused,
+					(const unsigned char *)&ctr, 8) <= 0)
+				goto process_cipher_des3ctr_err;
+			ctr_inc(ctr);
+		}
+		dst[n] = src[n] ^ ebuf[n % 8];
+		n++;
+	}
+
+	return 0;
+
+process_cipher_des3ctr_err:
+	LIBCRYPTO_LOG_ERR("Process libcrypto cipher des 3 ede ctr failed");
+	return -EINVAL;
+}
+
+/** Process auth gmac algorithm */
+static int
+process_libcrypto_auth_gmac(uint8_t *src, uint8_t *dst,
+		uint8_t *iv, uint8_t *key, int srclen, int ivlen,
+		EVP_CIPHER_CTX *ctx, const EVP_CIPHER *algo)
+{
+	int unused;
+
+	if (EVP_EncryptInit_ex(ctx, algo, NULL, NULL, NULL) <= 0)
+		goto process_auth_gmac_err;
+
+	if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_SET_IVLEN, ivlen, NULL) <= 0)
+		goto process_auth_gmac_err;
+
+	if (EVP_EncryptInit_ex(ctx, NULL, NULL, key, iv) <= 0)
+		goto process_auth_gmac_err;
+
+	if (EVP_EncryptUpdate(ctx, NULL, &unused, src, srclen) <= 0)
+		goto process_auth_gmac_err;
+
+	if (EVP_EncryptFinal_ex(ctx, NULL, &unused) <= 0)
+		goto process_auth_gmac_err;
+
+	if (EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_GCM_GET_TAG, 16, dst) <= 0)
+		goto process_auth_gmac_err;
+
+	return 0;
+
+process_auth_gmac_err:
+	LIBCRYPTO_LOG_ERR("Process libcrypto auth gmac failed");
+	return -EINVAL;
+}
+
+/** Process standard libcrypto auth algorithms */
+static int
+process_libcrypto_auth(uint8_t *src, uint8_t *dst,
+		__rte_unused uint8_t *iv, __rte_unused EVP_PKEY * pkey,
+		int srclen, EVP_MD_CTX *ctx, const EVP_MD *algo)
+{
+	size_t dstlen;
+
+	if (EVP_DigestInit_ex(ctx, algo, NULL) <= 0)
+		goto process_auth_err;
+
+	if (EVP_DigestUpdate(ctx, (char *)src, srclen) <= 0)
+		goto process_auth_err;
+
+	if (EVP_DigestFinal_ex(ctx, dst, (unsigned int *)&dstlen) <= 0)
+		goto process_auth_err;
+
+	return 0;
+
+process_auth_err:
+	LIBCRYPTO_LOG_ERR("Process libcrypto auth failed");
+	return -EINVAL;
+}
+
+/** Process standard libcrypto auth algorithms with hmac */
+static int
+process_libcrypto_auth_hmac(uint8_t *src, uint8_t *dst,
+		__rte_unused uint8_t *iv, EVP_PKEY *pkey,
+		int srclen,	EVP_MD_CTX *ctx, const EVP_MD *algo)
+{
+	size_t dstlen;
+
+	if (EVP_DigestSignInit(ctx, NULL, algo, NULL, pkey) <= 0)
+		goto process_auth_err;
+
+	if (EVP_DigestSignUpdate(ctx, (char *)src, srclen) <= 0)
+		goto process_auth_err;
+
+	if (EVP_DigestSignFinal(ctx, dst, &dstlen) <= 0)
+		goto process_auth_err;
+
+	return 0;
+
+process_auth_err:
+	LIBCRYPTO_LOG_ERR("Process libcrypto auth failed");
+	return -EINVAL;
+}
+
+/*----------------------------------------------------------------------------*/
+
+/** Process cipher operation */
+static int
+process_libcrypto_cipher_op
+		(struct rte_crypto_op *op, struct libcrypto_session *sess,
+		struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+	uint8_t *src, *dst, *iv;
+	int srclen, status;
+
+	srclen = op->sym->cipher.data.length;
+	src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+			op->sym->cipher.data.offset);
+	dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+			op->sym->cipher.data.offset);
+
+	iv = op->sym->cipher.iv.data;
+
+	if (sess->cipher.mode == LIBCRYPTO_CIPHER_LIB)
+		if (sess->cipher.direction == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+			status = process_libcrypto_cipher_encrypt(src, dst, iv,
+					sess->cipher.key.data, srclen,
+					sess->cipher.ctx, sess->cipher.evp_algo);
+		else
+			status = process_libcrypto_cipher_decrypt(src, dst, iv,
+					sess->cipher.key.data, srclen,
+					sess->cipher.ctx, sess->cipher.evp_algo);
+	else
+		status = process_libcrypto_cipher_des3ctr(src, dst, iv,
+				sess->cipher.key_ede, srclen, sess->cipher.ctx);
+
+	if (status == 0)
+		op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+	else
+		op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+
+	return status;
+}
+
+/** Process auth operation */
+static int
+process_libcrypto_auth_op
+		(struct rte_crypto_op *op, struct libcrypto_session *sess,
+		struct rte_mbuf *mbuf_src, struct rte_mbuf *mbuf_dst)
+{
+	uint8_t *src, *dst, *iv;
+	int srclen, ivlen, status = -1;
+
+	srclen = op->sym->auth.data.length;
+	src = rte_pktmbuf_mtod_offset(mbuf_src, uint8_t *,
+			op->sym->auth.data.offset);
+
+	if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_GENERATE) {
+		dst = rte_pktmbuf_mtod_offset(mbuf_dst, uint8_t *,
+				op->sym->auth.data.offset +
+				op->sym->auth.data.length);
+	} else {
+		dst = (uint8_t *)rte_pktmbuf_append(mbuf_src,
+				op->sym->auth.digest.length);
+	}
+
+	switch (sess->auth.mode) {
+	case LIBCRYPTO_AUTH_AS_AUTH:
+		status = process_libcrypto_auth(src, dst,
+				NULL, NULL,	srclen,
+				sess->auth.auth.ctx, sess->auth.auth.evp_algo);
+		break;
+	case LIBCRYPTO_AUTH_AS_HMAC:
+		status = process_libcrypto_auth_hmac(src, dst,
+				NULL, sess->auth.hmac.pkey, srclen,
+				sess->auth.hmac.ctx, sess->auth.hmac.evp_algo);
+		break;
+	case LIBCRYPTO_AUTH_AS_CIPHER:
+		iv = op->sym->cipher.iv.data;
+		ivlen = op->sym->cipher.iv.length;
+
+		status = process_libcrypto_auth_gmac(src, dst,
+				iv, sess->auth.cipher.key.data,	srclen, ivlen,
+				sess->auth.cipher.ctx, sess->auth.cipher.evp_algo);
+		break;
+	default:
+		break;
+	}
+
+	if (status == 0) {
+		op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+
+		if (sess->auth.operation == RTE_CRYPTO_AUTH_OP_VERIFY) {
+			if (memcmp(dst, op->sym->auth.digest.data,
+					op->sym->auth.digest.length) != 0) {
+				op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
+				status = -EINVAL;
+			}
+		}
+	} else
+		op->status = RTE_CRYPTO_OP_STATUS_ERROR;
+
+	return status;
+}
+
+/** Process crypto operation for mbuf */
+static int
+process_op(const struct libcrypto_qp *qp, struct rte_crypto_op *op,
+		struct libcrypto_session *sess)
+{
+	struct rte_mbuf *msrc, *mdst;
+	int status;
+
+	msrc = op->sym->m_src;
+	mdst = op->sym->m_dst ? op->sym->m_dst : op->sym->m_src;
+
+	switch (sess->chain_order) {
+	case LIBCRYPTO_CHAIN_ONLY_CIPHER:
+		status = process_libcrypto_cipher_op(op, sess, msrc, mdst);
+		break;
+	case LIBCRYPTO_CHAIN_ONLY_AUTH:
+		status = process_libcrypto_auth_op(op, sess, msrc, mdst);
+		break;
+	case LIBCRYPTO_CHAIN_CIPHER_AUTH:
+		status = process_libcrypto_cipher_op(op, sess, msrc, mdst);
+		if (status == 0)
+			status = process_libcrypto_auth_op(op, sess, mdst, mdst);
+		break;
+	case LIBCRYPTO_CHAIN_AUTH_CIPHER:
+		status = process_libcrypto_auth_op(op, sess, msrc, mdst);
+		if (status == 0)
+			status = process_libcrypto_cipher_op(op, sess, msrc, mdst);
+		break;
+	default:
+		status = -1;
+		break;
+	}
+
+	/* Free session if a session-less crypto op */
+	if (op->sym->sess_type == RTE_CRYPTO_SYM_OP_SESSIONLESS) {
+		libcrypto_reset_session(sess);
+		memset(sess, 0, sizeof(struct libcrypto_session));
+		rte_mempool_put(qp->sess_mp, op->sym->session);
+		op->sym->session = NULL;
+	}
+
+	if (status != 0)
+		return -1;
+
+	return rte_ring_enqueue(qp->processed_ops, (void *)op);
+}
+
+/*
+ *------------------------------------------------------------------------------
+ * PMD Framework
+ *------------------------------------------------------------------------------
+ */
+
+/** Enqueue burst */
+static uint16_t
+libcrypto_pmd_enqueue_burst(void *queue_pair, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct libcrypto_session *sess;
+	struct libcrypto_qp *qp = queue_pair;
+	int i, retval;
+
+	for (i = 0; i < nb_ops; i++) {
+		sess = get_session(qp, ops[i]);
+		if (unlikely(sess == NULL))
+			goto enqueue_err;
+
+		retval = process_op(qp, ops[i], sess);
+		if (unlikely(retval < 0))
+			goto enqueue_err;
+	}
+
+	qp->stats.enqueued_count += i;
+	return i;
+
+enqueue_err:
+	qp->stats.enqueue_err_count++;
+	return i;
+}
+
+/** Dequeue burst */
+static uint16_t
+libcrypto_pmd_dequeue_burst(void *queue_pair, struct rte_crypto_op **ops,
+		uint16_t nb_ops)
+{
+	struct libcrypto_qp *qp = queue_pair;
+
+	unsigned int nb_dequeued = 0;
+
+	nb_dequeued = rte_ring_dequeue_burst(qp->processed_ops,
+			(void **)ops, nb_ops);
+	qp->stats.dequeued_count += nb_dequeued;
+
+	return nb_dequeued;
+}
+
+/** Create LIBCRYPTO crypto device */
+static int
+cryptodev_libcrypto_create(const char *name,
+		struct rte_crypto_vdev_init_params *init_params)
+{
+	struct rte_cryptodev *dev;
+	char crypto_dev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+	struct libcrypto_private *internals;
+
+	/* create a unique device name */
+	if (create_unique_device_name(crypto_dev_name,
+			RTE_CRYPTODEV_NAME_MAX_LEN) != 0) {
+		LIBCRYPTO_LOG_ERR("failed to create unique cryptodev name");
+		return -EINVAL;
+	}
+
+	dev = rte_cryptodev_pmd_virtual_dev_init(crypto_dev_name,
+			sizeof(struct libcrypto_private), init_params->socket_id);
+	if (dev == NULL) {
+		LIBCRYPTO_LOG_ERR("failed to create cryptodev vdev");
+		goto init_error;
+	}
+
+	dev->dev_type = RTE_CRYPTODEV_LIBCRYPTO_PMD;
+	dev->dev_ops = rte_libcrypto_pmd_ops;
+
+	/* register rx/tx burst functions for data path */
+	dev->dequeue_burst = libcrypto_pmd_dequeue_burst;
+	dev->enqueue_burst = libcrypto_pmd_enqueue_burst;
+
+	dev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+			RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING |
+			RTE_CRYPTODEV_FF_CPU_AESNI;
+
+	/* Set vector instructions mode supported */
+	internals = dev->data->dev_private;
+
+	internals->max_nb_qpairs = init_params->max_nb_queue_pairs;
+	internals->max_nb_sessions = init_params->max_nb_sessions;
+
+	return 0;
+
+init_error:
+	LIBCRYPTO_LOG_ERR("driver %s: cryptodev_libcrypto_create failed", name);
+
+	cryptodev_libcrypto_uninit(crypto_dev_name);
+	return -EFAULT;
+}
+
+/** Initialise LIBCRYPTO crypto device */
+static int
+cryptodev_libcrypto_init(const char *name,
+		const char *input_args)
+{
+	struct rte_crypto_vdev_init_params init_params = {
+		RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_QUEUE_PAIRS,
+		RTE_CRYPTODEV_VDEV_DEFAULT_MAX_NB_SESSIONS,
+		rte_socket_id()
+	};
+
+	rte_cryptodev_parse_vdev_init_params(&init_params, input_args);
+
+	RTE_LOG(INFO, PMD, "Initialising %s on NUMA node %d\n", name,
+			init_params.socket_id);
+	RTE_LOG(INFO, PMD, "  Max number of queue pairs = %d\n",
+			init_params.max_nb_queue_pairs);
+	RTE_LOG(INFO, PMD, "  Max number of sessions = %d\n",
+			init_params.max_nb_sessions);
+
+	return cryptodev_libcrypto_create(name, &init_params);
+}
+
+/** Uninitialise LIBCRYPTO crypto device */
+static int
+cryptodev_libcrypto_uninit(const char *name)
+{
+	if (name == NULL)
+		return -EINVAL;
+
+	RTE_LOG(INFO, PMD,
+		"Closing LIBCRYPTO crypto device %s on numa socket %u\n",
+		name, rte_socket_id());
+
+	return 0;
+}
+
+static struct rte_driver cryptodev_libcrypto_pmd_drv = {
+	.type = PMD_VDEV,
+	.init = cryptodev_libcrypto_init,
+	.uninit = cryptodev_libcrypto_uninit
+};
+
+PMD_REGISTER_DRIVER(cryptodev_libcrypto_pmd_drv, CRYPTODEV_NAME_LIBCRYPTO_PMD);
+DRIVER_REGISTER_PARAM_STRING(CRYPTODEV_NAME_LIBCRYPTO_PMD,
+	"max_nb_queue_pairs=<int> "
+	"max_nb_sessions=<int> "
+	"socket_id=<int>");
diff --git a/drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c b/drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c
new file mode 100644
index 0000000..68c49c9
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_libcrypto_pmd_ops.c
@@ -0,0 +1,638 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_cryptodev_pmd.h>
+
+#include "rte_libcrypto_pmd_private.h"
+
+
+static const struct rte_cryptodev_capabilities libcrypto_pmd_capabilities[] = {
+	{	/* MD5 HMAC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+				.block_size = 64,
+				.key_size = {
+					.min = 64,
+					.max = 64,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 16,
+					.max = 16,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* MD5 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_MD5,
+				.block_size = 64,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 16,
+					.max = 16,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA1 HMAC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+				.block_size = 64,
+				.key_size = {
+					.min = 64,
+					.max = 64,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 20,
+					.max = 20,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA1 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA1,
+				.block_size = 64,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 20,
+					.max = 20,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA224 HMAC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+				.block_size = 64,
+				.key_size = {
+					.min = 64,
+					.max = 64,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 20,
+					.max = 20,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA224 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA224,
+				.block_size = 64,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 28,
+					.max = 28,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA256 HMAC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+				.block_size = 64,
+				.key_size = {
+					.min = 64,
+					.max = 64,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 32,
+					.max = 32,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA256 */
+			.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+			{.sym = {
+				.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+				{.auth = {
+					.algo = RTE_CRYPTO_AUTH_SHA256,
+					.block_size = 64,
+					.key_size = {
+						.min = 0,
+						.max = 0,
+						.increment = 0
+					},
+					.digest_size = {
+						.min = 32,
+						.max = 32,
+						.increment = 0
+					},
+					.aad_size = { 0 }
+				}, }
+			}, }
+		},
+	{	/* SHA384 HMAC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+				.block_size = 128,
+				.key_size = {
+					.min = 128,
+					.max = 128,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 48,
+					.max = 48,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA384 */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA384,
+				.block_size = 128,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 48,
+					.max = 48,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA512 HMAC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+				.block_size = 128,
+				.key_size = {
+					.min = 128,
+					.max = 128,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 64,
+					.max = 64,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* SHA512  */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+			{.auth = {
+				.algo = RTE_CRYPTO_AUTH_SHA512,
+				.block_size = 128,
+				.key_size = {
+					.min = 0,
+					.max = 0,
+					.increment = 0
+				},
+				.digest_size = {
+					.min = 64,
+					.max = 64,
+					.increment = 0
+				},
+				.aad_size = { 0 }
+			}, }
+		}, }
+	},
+	{	/* AES CBC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_AES_CBC,
+				.block_size = 16,
+				.key_size = {
+					.min = 16,
+					.max = 32,
+					.increment = 8
+				},
+				.iv_size = {
+					.min = 16,
+					.max = 16,
+					.increment = 0
+				}
+			}, }
+		}, }
+	},
+	{	/* AES CTR */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_AES_CTR,
+				.block_size = 16,
+				.key_size = {
+					.min = 16,
+					.max = 32,
+					.increment = 8
+				},
+				.iv_size = {
+					.min = 16,
+					.max = 16,
+					.increment = 0
+				}
+			}, }
+		}, }
+	},
+	{	/* 3DES CBC */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+				.block_size = 8,
+				.key_size = {
+					.min = 16,
+					.max = 24,
+					.increment = 8
+				},
+				.iv_size = {
+					.min = 8,
+					.max = 8,
+					.increment = 0
+				}
+			}, }
+		}, }
+	},
+	{	/* 3DES CTR */
+		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+		{.sym = {
+			.xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+			{.cipher = {
+				.algo = RTE_CRYPTO_CIPHER_3DES_CTR,
+				.block_size = 8,
+				.key_size = {
+					.min = 16,
+					.max = 24,
+					.increment = 8
+				},
+				.iv_size = {
+					.min = 8,
+					.max = 8,
+					.increment = 0
+				}
+			}, }
+		}, }
+	},
+
+	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+
+/** Configure device */
+static int
+libcrypto_pmd_config(__rte_unused struct rte_cryptodev *dev)
+{
+	return 0;
+}
+
+/** Start device */
+static int
+libcrypto_pmd_start(__rte_unused struct rte_cryptodev *dev)
+{
+	return 0;
+}
+
+/** Stop device */
+static void
+libcrypto_pmd_stop(__rte_unused struct rte_cryptodev *dev)
+{
+}
+
+/** Close device */
+static int
+libcrypto_pmd_close(__rte_unused struct rte_cryptodev *dev)
+{
+	return 0;
+}
+
+
+/** Get device statistics */
+static void
+libcrypto_pmd_stats_get(struct rte_cryptodev *dev,
+		struct rte_cryptodev_stats *stats)
+{
+	int qp_id;
+
+	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+		struct libcrypto_qp *qp = dev->data->queue_pairs[qp_id];
+
+		stats->enqueued_count += qp->stats.enqueued_count;
+		stats->dequeued_count += qp->stats.dequeued_count;
+
+		stats->enqueue_err_count += qp->stats.enqueue_err_count;
+		stats->dequeue_err_count += qp->stats.dequeue_err_count;
+	}
+}
+
+/** Reset device statistics */
+static void
+libcrypto_pmd_stats_reset(struct rte_cryptodev *dev)
+{
+	int qp_id;
+
+	for (qp_id = 0; qp_id < dev->data->nb_queue_pairs; qp_id++) {
+		struct libcrypto_qp *qp = dev->data->queue_pairs[qp_id];
+
+		memset(&qp->stats, 0, sizeof(qp->stats));
+	}
+}
+
+
+/** Get device info */
+static void
+libcrypto_pmd_info_get(struct rte_cryptodev *dev,
+		struct rte_cryptodev_info *dev_info)
+{
+	struct libcrypto_private *internals = dev->data->dev_private;
+
+	if (dev_info != NULL) {
+		dev_info->dev_type = dev->dev_type;
+		dev_info->feature_flags = dev->feature_flags;
+		dev_info->capabilities = libcrypto_pmd_capabilities;
+		dev_info->max_nb_queue_pairs = internals->max_nb_qpairs;
+		dev_info->sym.max_nb_sessions = internals->max_nb_sessions;
+	}
+}
+
+/** Release queue pair */
+static int
+libcrypto_pmd_qp_release(struct rte_cryptodev *dev, uint16_t qp_id)
+{
+	if (dev->data->queue_pairs[qp_id] != NULL) {
+		rte_free(dev->data->queue_pairs[qp_id]);
+		dev->data->queue_pairs[qp_id] = NULL;
+	}
+	return 0;
+}
+
+/** set a unique name for the queue pair based on it's name, dev_id and qp_id */
+static int
+libcrypto_pmd_qp_set_unique_name(struct rte_cryptodev *dev,
+		struct libcrypto_qp *qp)
+{
+	unsigned int n = snprintf(qp->name, sizeof(qp->name),
+			"libcrypto_mb_pmd_%u_qp_%u",
+			dev->data->dev_id, qp->id);
+
+	if (n > sizeof(qp->name))
+		return -1;
+
+	return 0;
+}
+
+
+/** Create a ring to place processed operations on */
+static struct rte_ring *
+libcrypto_pmd_qp_create_processed_ops_ring(struct libcrypto_qp *qp,
+		unsigned int ring_size, int socket_id)
+{
+	struct rte_ring *r;
+
+	r = rte_ring_lookup(qp->name);
+	if (r) {
+		if (r->prod.size >= ring_size) {
+			LIBCRYPTO_LOG_INFO(
+				"Reusing existing ring %s for processed ops",
+				 qp->name);
+			return r;
+		}
+
+		LIBCRYPTO_LOG_ERR(
+			"Unable to reuse existing ring %s for processed ops",
+			 qp->name);
+		return NULL;
+	}
+
+	return rte_ring_create(qp->name, ring_size, socket_id,
+			RING_F_SP_ENQ | RING_F_SC_DEQ);
+}
+
+
+/** Setup a queue pair */
+static int
+libcrypto_pmd_qp_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+		const struct rte_cryptodev_qp_conf *qp_conf,
+		 int socket_id)
+{
+	struct libcrypto_qp *qp = NULL;
+
+	/* Free memory prior to re-allocation if needed. */
+	if (dev->data->queue_pairs[qp_id] != NULL)
+		libcrypto_pmd_qp_release(dev, qp_id);
+
+	/* Allocate the queue pair data structure. */
+	qp = rte_zmalloc_socket("LIBCRYPTO PMD Queue Pair", sizeof(*qp),
+					RTE_CACHE_LINE_SIZE, socket_id);
+	if (qp == NULL)
+		return -ENOMEM;
+
+	qp->id = qp_id;
+	dev->data->queue_pairs[qp_id] = qp;
+
+	if (libcrypto_pmd_qp_set_unique_name(dev, qp))
+		goto qp_setup_cleanup;
+
+	qp->processed_ops = libcrypto_pmd_qp_create_processed_ops_ring(qp,
+			qp_conf->nb_descriptors, socket_id);
+	if (qp->processed_ops == NULL)
+		goto qp_setup_cleanup;
+
+	qp->sess_mp = dev->data->session_pool;
+
+	memset(&qp->stats, 0, sizeof(qp->stats));
+
+	return 0;
+
+qp_setup_cleanup:
+	if (qp)
+		rte_free(qp);
+
+	return -1;
+}
+
+/** Start queue pair */
+static int
+libcrypto_pmd_qp_start(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint16_t queue_pair_id)
+{
+	return -ENOTSUP;
+}
+
+/** Stop queue pair */
+static int
+libcrypto_pmd_qp_stop(__rte_unused struct rte_cryptodev *dev,
+		__rte_unused uint16_t queue_pair_id)
+{
+	return -ENOTSUP;
+}
+
+/** Return the number of allocated queue pairs */
+static uint32_t
+libcrypto_pmd_qp_count(struct rte_cryptodev *dev)
+{
+	return dev->data->nb_queue_pairs;
+}
+
+/** Returns the size of the session structure */
+static unsigned
+libcrypto_pmd_session_get_size(struct rte_cryptodev *dev __rte_unused)
+{
+	return sizeof(struct libcrypto_session);
+}
+
+/** Configure the session from a crypto xform chain */
+static void *
+libcrypto_pmd_session_configure(struct rte_cryptodev *dev __rte_unused,
+		struct rte_crypto_sym_xform *xform,	void *sess)
+{
+	if (unlikely(sess == NULL)) {
+		LIBCRYPTO_LOG_ERR("invalid session struct");
+		return NULL;
+	}
+
+	if (libcrypto_set_session_parameters(
+			sess, xform) != 0) {
+		LIBCRYPTO_LOG_ERR("failed configure session parameters");
+		return NULL;
+	}
+
+	return sess;
+}
+
+
+/** Clear the memory of session so it doesn't leave key material behind */
+static void
+libcrypto_pmd_session_clear(struct rte_cryptodev *dev __rte_unused, void *sess)
+{
+	/*
+	 * Current just resetting the whole data structure, need to investigate
+	 * whether a more selective reset of key would be more performant
+	 */
+	if (sess) {
+		libcrypto_reset_session(sess);
+		memset(sess, 0, sizeof(struct libcrypto_session));
+	}
+}
+
+struct rte_cryptodev_ops libcrypto_pmd_ops = {
+		.dev_configure		= libcrypto_pmd_config,
+		.dev_start		= libcrypto_pmd_start,
+		.dev_stop		= libcrypto_pmd_stop,
+		.dev_close		= libcrypto_pmd_close,
+
+		.stats_get		= libcrypto_pmd_stats_get,
+		.stats_reset		= libcrypto_pmd_stats_reset,
+
+		.dev_infos_get		= libcrypto_pmd_info_get,
+
+		.queue_pair_setup	= libcrypto_pmd_qp_setup,
+		.queue_pair_release	= libcrypto_pmd_qp_release,
+		.queue_pair_start	= libcrypto_pmd_qp_start,
+		.queue_pair_stop	= libcrypto_pmd_qp_stop,
+		.queue_pair_count	= libcrypto_pmd_qp_count,
+
+		.session_get_size	= libcrypto_pmd_session_get_size,
+		.session_configure	= libcrypto_pmd_session_configure,
+		.session_clear		= libcrypto_pmd_session_clear
+};
+
+struct rte_cryptodev_ops *rte_libcrypto_pmd_ops = &libcrypto_pmd_ops;
diff --git a/drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h b/drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h
new file mode 100644
index 0000000..b40a2d2
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_libcrypto_pmd_private.h
@@ -0,0 +1,189 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LIBCRYPTO_PMD_PRIVATE_H_
+#define _LIBCRYPTO_PMD_PRIVATE_H_
+
+#include <openssl/evp.h>
+#include <openssl/des.h>
+
+
+#define LIBCRYPTO_LOG_ERR(fmt, args...) \
+	RTE_LOG(ERR, CRYPTODEV, "[%s] %s() line %u: " fmt "\n",  \
+			RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
+			__func__, __LINE__, ## args)
+
+#ifdef RTE_LIBRTE_LIBCRYPTO_DEBUG
+#define LIBCRYPTO_LOG_INFO(fmt, args...) \
+	RTE_LOG(INFO, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+			RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
+			__func__, __LINE__, ## args)
+
+#define LIBCRYPTO_LOG_DBG(fmt, args...) \
+	RTE_LOG(DEBUG, CRYPTODEV, "[%s] %s() line %u: " fmt "\n", \
+			RTE_STR(CRYPTODEV_NAME_LIBCRYPTO_PMD), \
+			__func__, __LINE__, ## args)
+#else
+#define LIBCRYPTO_LOG_INFO(fmt, args...)
+#define LIBCRYPTO_LOG_DBG(fmt, args...)
+#endif
+
+
+/** LIBCRYPTO operation order mode enumerator */
+enum libcrypto_chain_order {
+	LIBCRYPTO_CHAIN_ONLY_CIPHER,
+	LIBCRYPTO_CHAIN_ONLY_AUTH,
+	LIBCRYPTO_CHAIN_CIPHER_AUTH,
+	LIBCRYPTO_CHAIN_AUTH_CIPHER,
+	LIBCRYPTO_CHAIN_NOT_SUPPORTED
+};
+
+/** LIBCRYPTO cipher mode enumerator */
+enum libcrypto_cipher_mode {
+	LIBCRYPTO_CIPHER_LIB,
+	LIBCRYPTO_CIPHER_DES3CTR,
+};
+
+/** LIBCRYPTO auth mode enumerator */
+enum libcrypto_auth_mode {
+	LIBCRYPTO_AUTH_AS_AUTH,
+	LIBCRYPTO_AUTH_AS_HMAC,
+	LIBCRYPTO_AUTH_AS_CIPHER,
+	LIBCRYPTO_AUTH_NULL
+};
+
+/** private data structure for each LIBCRYPTO crypto device */
+struct libcrypto_private {
+	unsigned int max_nb_qpairs;
+	/**< Max number of queue pairs */
+	unsigned int max_nb_sessions;
+	/**< Max number of sessions */
+};
+
+/** LIBCRYPTO crypto queue pair */
+struct libcrypto_qp {
+	uint16_t id;
+	/**< Queue Pair Identifier */
+	char name[RTE_CRYPTODEV_NAME_LEN];
+	/**< Unique Queue Pair Name */
+	struct rte_ring *processed_ops;
+	/**< Ring for placing process packets */
+	struct rte_mempool *sess_mp;
+	/**< Session Mempool */
+	struct rte_cryptodev_stats stats;
+	/**< Queue pair statistics */
+} __rte_cache_aligned;
+
+/** LIBCRYPTO crypto private session structure */
+struct libcrypto_session {
+	enum libcrypto_chain_order chain_order;
+	/**< chain order mode */
+
+	/** Cipher Parameters */
+	struct {
+		enum rte_crypto_cipher_operation direction;
+		/**< cipher operation direction */
+		enum libcrypto_cipher_mode mode;
+		/**< cipher operation mode */
+		enum rte_crypto_cipher_algorithm algo;
+		/**< cipher algorithm */
+
+		struct {
+			uint8_t *data;
+			/**< pointer to key data */
+			size_t length;
+			/**< key length in bytes */
+		} key;
+
+		const EVP_CIPHER *evp_algo;
+		/**< pointer to EVP algorithm function */
+		EVP_CIPHER_CTX *ctx;
+		/**< pointer to EVP context structure */
+
+		uint8_t key_ede[24];
+		/**< key data storage to be used in ede process */
+	} cipher;
+
+	/** Authentication Parameters */
+	struct {
+		enum rte_crypto_auth_operation operation;
+		/**< auth operation generate or verify */
+		enum libcrypto_auth_mode mode;
+		/**< auth operation mode */
+
+		union {
+			struct {
+				const EVP_MD *evp_algo;
+				/**< pointer to EVP algorithm function */
+				EVP_MD_CTX *ctx;
+				/**< pointer to EVP context structure */
+			} auth;
+
+			struct {
+				EVP_PKEY *pkey;
+				/**< pointer to EVP key */
+				const EVP_MD *evp_algo;
+				/**< pointer to EVP algorithm function */
+				EVP_MD_CTX *ctx;
+				/**< pointer to EVP context structure */
+			} hmac;
+
+			struct {
+				struct {
+					uint8_t *data;
+					/**< pointer to key data */
+					size_t length;
+					/**< key length in bytes */
+				} key;
+				const EVP_CIPHER *evp_algo;
+				/**< pointer to EVP algorithm function */
+				EVP_CIPHER_CTX *ctx;
+				/**< pointer to EVP context structure */
+			} cipher;
+		};
+	} auth;
+
+} __rte_cache_aligned;
+
+/** Set and validate LIBCRYPTO crypto session parameters */
+extern int
+libcrypto_set_session_parameters(struct libcrypto_session *sess,
+		const struct rte_crypto_sym_xform *xform);
+
+/** Reset LIBCRYPTO crypto session parameters */
+extern void
+libcrypto_reset_session(struct libcrypto_session *sess);
+
+/** device specific operations function pointer structure */
+extern struct rte_cryptodev_ops *rte_libcrypto_pmd_ops;
+
+#endif /* _LIBCRYPTO_PMD_PRIVATE_H_ */
diff --git a/drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map b/drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map
new file mode 100644
index 0000000..58c4dea
--- /dev/null
+++ b/drivers/crypto/libcrypto/rte_pmd_libcrypto_version.map
@@ -0,0 +1,3 @@
+DPDK_16.11 {
+	local: *;
+};
\ No newline at end of file
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 1a0095b..67c0aa9 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -135,7 +135,8 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB)   += -lrte_pmd_aesni_mb
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_MB)   += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM)  += -lrte_pmd_aesni_gcm -lcrypto
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM)  += -L$(AESNI_MULTI_BUFFER_LIB_PATH) -lIPSec_MB
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO)    += -lrte_pmd_libcrypto -lcrypto
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO)+= -lrte_pmd_null_crypto
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT)        += -lrte_pmd_qat -lcrypto
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)     += -lrte_pmd_snow3g
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)     += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
-- 
1.9.1

  reply	other threads:[~2016-08-26  7:24 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-26  7:21 [dpdk-dev] [PATCH 0/4] New crypto software based device Piotr Azarewicz
2016-08-26  7:21 ` Piotr Azarewicz [this message]
     [not found]   ` <CAOysbxoNTyTkz2A9oteLj2LfExObqnjSSsQK=s6p0kVuaEcS9g@mail.gmail.com>
2016-09-08 15:50     ` [dpdk-dev] [PATCH 1/4] libcrypto_pmd: initial implementation of SW crypto device Zbigniew Bodek
2016-09-12 11:16   ` Akhil Goyal
2016-09-14  8:48     ` Jastrzebski, MichalX K
2016-10-11  9:50       ` Mrozowicz, SlawomirX
2016-08-26  7:21 ` [dpdk-dev] [PATCH 2/4] lib/cryptodev: added support to libcrypto PMD Piotr Azarewicz
2016-08-26  7:21 ` [dpdk-dev] [PATCH 3/4] app/test: added tests for " Piotr Azarewicz
2016-08-26  7:21 ` [dpdk-dev] [PATCH 4/4] examples/l2fwd-crypto: updated example " Piotr Azarewicz
2016-09-07 18:52 ` [dpdk-dev] [PATCH 0/4] New crypto software based device De Lara Guarch, Pablo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1472196117-21750-2-git-send-email-piotrx.t.azarewicz@intel.com \
    --to=piotrx.t.azarewicz@intel.com \
    --cc=danielx.t.mrzyglod@intel.com \
    --cc=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    --cc=marcinx.kerlin@intel.com \
    --cc=michalx.kobylinski@intel.com \
    --cc=slawomirx.mrozowicz@intel.com \
    --cc=tomaszx.kulasek@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).