* [dpdk-dev] [PATCH] app/test: improve error message in crypto test code
@ 2016-09-16 12:01 Fiona Trahe
0 siblings, 0 replies; 3+ messages in thread
From: Fiona Trahe @ 2016-09-16 12:01 UTC (permalink / raw)
To: dev; +Cc: pablo.de.lara.guarch, fiona.trahe
From: Fiona Trahe <fiona.trahe@intel.com>
Improve error message if crypto PMD build is not enabled in config file
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
app/test/test_cryptodev.c | 37 +++++++++++++++++++++++++++++++++++++
app/test/test_cryptodev_perf.c | 23 +++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index f17c84c..c30a421 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -189,6 +189,11 @@ testsuite_setup(void)
/* Create 2 AESNI MB devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_AESNI_MB_PMD);
if (nb_devs < 2) {
@@ -206,6 +211,11 @@ testsuite_setup(void)
/* Create 2 LIBCRYPTO devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
+#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_LIBCRYPTO_PMD);
if (nb_devs < 2) {
@@ -223,6 +233,11 @@ testsuite_setup(void)
/* Create 2 AESNI GCM devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_GCM_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_GCM
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_AESNI_GCM_PMD);
if (nb_devs < 2) {
@@ -238,6 +253,11 @@ testsuite_setup(void)
/* Create 2 Snow3G devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -252,6 +272,11 @@ testsuite_setup(void)
/* Create 2 KASUMI devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_KASUMI_PMD) {
+#ifndef RTE_LIBRTE_PMD_KASUMI
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_KASUMI must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_KASUMI_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -266,6 +291,11 @@ testsuite_setup(void)
/* Create 2 NULL devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_NULL_PMD) {
+#ifndef RTE_LIBRTE_PMD_NULL_CRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_NULL_PMD);
if (nb_devs < 2) {
@@ -281,6 +311,13 @@ testsuite_setup(void)
}
}
+#ifndef RTE_LIBRTE_PMD_QAT
+ if (gbl_cryptodev_type == RTE_CRYPTODEV_QAT_SYM_PMD) {
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+#endif
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
diff --git a/app/test/test_cryptodev_perf.c b/app/test/test_cryptodev_perf.c
index 0a0085d..c80c335 100644
--- a/app/test/test_cryptodev_perf.c
+++ b/app/test/test_cryptodev_perf.c
@@ -261,6 +261,11 @@ testsuite_setup(void)
/* Create 2 AESNI MB devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_AESNI_MB_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -276,6 +281,11 @@ testsuite_setup(void)
/* Create 2 SNOW3G devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -291,6 +301,11 @@ testsuite_setup(void)
/* Create 2 LIBCRYPTO devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
+#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_LIBCRYPTO_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -304,6 +319,14 @@ testsuite_setup(void)
}
}
+#ifndef RTE_LIBRTE_PMD_QAT
+ if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) {
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+#endif
+
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
RTE_LOG(ERR, USER1, "No crypto devices found?\n");
--
2.5.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* [dpdk-dev] [PATCH] app/test: improve error message in crypto test code
@ 2016-09-16 14:37 Fiona Trahe
2016-09-16 15:50 ` Trahe, Fiona
0 siblings, 1 reply; 3+ messages in thread
From: Fiona Trahe @ 2016-09-16 14:37 UTC (permalink / raw)
To: dev; +Cc: pablo.de.lara.guarch, fiona.trahe
Resending patch as first send got to mailing list but didn't get to pachwork
Improve error message if crypto PMD build is not enabled in config file
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
app/test/test_cryptodev.c | 37 +++++++++++++++++++++++++++++++++++++
app/test/test_cryptodev_perf.c | 23 +++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index f17c84c..c30a421 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -189,6 +189,11 @@ testsuite_setup(void)
/* Create 2 AESNI MB devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_AESNI_MB_PMD);
if (nb_devs < 2) {
@@ -206,6 +211,11 @@ testsuite_setup(void)
/* Create 2 LIBCRYPTO devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
+#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_LIBCRYPTO_PMD);
if (nb_devs < 2) {
@@ -223,6 +233,11 @@ testsuite_setup(void)
/* Create 2 AESNI GCM devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_GCM_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_GCM
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_AESNI_GCM_PMD);
if (nb_devs < 2) {
@@ -238,6 +253,11 @@ testsuite_setup(void)
/* Create 2 Snow3G devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -252,6 +272,11 @@ testsuite_setup(void)
/* Create 2 KASUMI devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_KASUMI_PMD) {
+#ifndef RTE_LIBRTE_PMD_KASUMI
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_KASUMI must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_KASUMI_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -266,6 +291,11 @@ testsuite_setup(void)
/* Create 2 NULL devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_NULL_PMD) {
+#ifndef RTE_LIBRTE_PMD_NULL_CRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_NULL_PMD);
if (nb_devs < 2) {
@@ -281,6 +311,13 @@ testsuite_setup(void)
}
}
+#ifndef RTE_LIBRTE_PMD_QAT
+ if (gbl_cryptodev_type == RTE_CRYPTODEV_QAT_SYM_PMD) {
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+#endif
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
diff --git a/app/test/test_cryptodev_perf.c b/app/test/test_cryptodev_perf.c
index 0a0085d..c80c335 100644
--- a/app/test/test_cryptodev_perf.c
+++ b/app/test/test_cryptodev_perf.c
@@ -261,6 +261,11 @@ testsuite_setup(void)
/* Create 2 AESNI MB devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_AESNI_MB_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -276,6 +281,11 @@ testsuite_setup(void)
/* Create 2 SNOW3G devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -291,6 +301,11 @@ testsuite_setup(void)
/* Create 2 LIBCRYPTO devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_LIBCRYPTO_PMD) {
+#ifndef RTE_LIBRTE_PMD_LIBCRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_LIBCRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_LIBCRYPTO_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -304,6 +319,14 @@ testsuite_setup(void)
}
}
+#ifndef RTE_LIBRTE_PMD_QAT
+ if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) {
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+#endif
+
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
RTE_LOG(ERR, USER1, "No crypto devices found?\n");
--
2.5.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] [PATCH] app/test: improve error message in crypto test code
2016-09-16 14:37 Fiona Trahe
@ 2016-09-16 15:50 ` Trahe, Fiona
0 siblings, 0 replies; 3+ messages in thread
From: Trahe, Fiona @ 2016-09-16 15:50 UTC (permalink / raw)
To: dev; +Cc: De Lara Guarch, Pablo, Trahe, Fiona
> -----Original Message-----
> From: Trahe, Fiona
> Sent: Friday, September 16, 2016 3:37 PM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo <pablo.de.lara.guarch@intel.com>; Trahe, Fiona
> <fiona.trahe@intel.com>
> Subject: [PATCH] app/test: improve error message in crypto test code
>
> Resending patch as first send got to mailing list but didn't get to pachwork
>
>
> Improve error message if crypto PMD build is not enabled in config file
>
> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Nack - This patch will need rebasing after the libcrypto patchset.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-09-16 15:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-16 12:01 [dpdk-dev] [PATCH] app/test: improve error message in crypto test code Fiona Trahe
2016-09-16 14:37 Fiona Trahe
2016-09-16 15:50 ` Trahe, Fiona
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).