DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jeff Shaw <jeffrey.b.shaw@intel.com>
To: dev@dpdk.org
Cc: helin.zhang@intel.com, jingjing.wu@intel.com, damarion@cisco.com,
	qi.z.zhang@intel.com, jing.d.chen@intel.com
Subject: [dpdk-dev] [PATCH v4 2/2] i40e: Enable bad checksum flags in i40e vPMD
Date: Thu,  6 Oct 2016 02:38:10 -0400	[thread overview]
Message-ID: <1475735890-129160-2-git-send-email-jeffrey.b.shaw@intel.com> (raw)
In-Reply-To: <1475735890-129160-1-git-send-email-jeffrey.b.shaw@intel.com>

From: Damjan Marion <damarion@cisco.com>

Decode the checksum flags from the rx descriptor, setting
the appropriate bit in the mbuf ol_flags field when the flag
indicates a bad checksum.

Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
---
 drivers/net/i40e/i40e_rxtx_vec.c | 48 +++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/drivers/net/i40e/i40e_rxtx_vec.c b/drivers/net/i40e/i40e_rxtx_vec.c
index 6c63141..ccd4956 100644
--- a/drivers/net/i40e/i40e_rxtx_vec.c
+++ b/drivers/net/i40e/i40e_rxtx_vec.c
@@ -138,19 +138,14 @@ i40e_rxq_rearm(struct i40e_rx_queue *rxq)
 static inline void
 desc_to_olflags_v(__m128i descs[4], struct rte_mbuf **rx_pkts)
 {
-	__m128i vlan0, vlan1, rss;
-	union {
-		uint16_t e[4];
-		uint64_t dword;
-	} vol;
+	__m128i vlan0, vlan1, rss, l3_l4e;
 
 	/* mask everything except RSS, flow director and VLAN flags
 	 * bit2 is for VLAN tag, bit11 for flow director indication
 	 * bit13:12 for RSS indication.
 	 */
-	const __m128i rss_vlan_msk = _mm_set_epi16(
-			0x0000, 0x0000, 0x0000, 0x0000,
-			0x3804, 0x3804, 0x3804, 0x3804);
+	const __m128i rss_vlan_msk = _mm_set_epi32(
+			0x1c03804, 0x1c03804, 0x1c03804, 0x1c03804);
 
 	/* map rss and vlan type to rss hash and vlan flag */
 	const __m128i vlan_flags = _mm_set_epi8(0, 0, 0, 0,
@@ -163,23 +158,36 @@ desc_to_olflags_v(__m128i descs[4], struct rte_mbuf **rx_pkts)
 			PKT_RX_RSS_HASH | PKT_RX_FDIR, PKT_RX_RSS_HASH, 0, 0,
 			0, 0, PKT_RX_FDIR, 0);
 
-	vlan0 = _mm_unpackhi_epi16(descs[0], descs[1]);
-	vlan1 = _mm_unpackhi_epi16(descs[2], descs[3]);
-	vlan0 = _mm_unpacklo_epi32(vlan0, vlan1);
+	const __m128i l3_l4e_flags = _mm_set_epi8(0, 0, 0, 0, 0, 0, 0, 0,
+			PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD,
+			PKT_RX_EIP_CKSUM_BAD | PKT_RX_L4_CKSUM_BAD,
+			PKT_RX_EIP_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD,
+			PKT_RX_EIP_CKSUM_BAD,
+			PKT_RX_L4_CKSUM_BAD | PKT_RX_IP_CKSUM_BAD,
+			PKT_RX_L4_CKSUM_BAD,
+			PKT_RX_IP_CKSUM_BAD,
+			0);
+
+	vlan0 = _mm_unpackhi_epi32(descs[0], descs[1]);
+	vlan1 = _mm_unpackhi_epi32(descs[2], descs[3]);
+	vlan0 = _mm_unpacklo_epi64(vlan0, vlan1);
 
 	vlan1 = _mm_and_si128(vlan0, rss_vlan_msk);
 	vlan0 = _mm_shuffle_epi8(vlan_flags, vlan1);
 
-	rss = _mm_srli_epi16(vlan1, 11);
+	rss = _mm_srli_epi32(vlan1, 11);
 	rss = _mm_shuffle_epi8(rss_flags, rss);
 
+	l3_l4e = _mm_srli_epi32(vlan1, 22);
+	l3_l4e = _mm_shuffle_epi8(l3_l4e_flags, l3_l4e);
+
 	vlan0 = _mm_or_si128(vlan0, rss);
-	vol.dword = _mm_cvtsi128_si64(vlan0);
+	vlan0 = _mm_or_si128(vlan0, l3_l4e);
 
-	rx_pkts[0]->ol_flags = vol.e[0];
-	rx_pkts[1]->ol_flags = vol.e[1];
-	rx_pkts[2]->ol_flags = vol.e[2];
-	rx_pkts[3]->ol_flags = vol.e[3];
+	rx_pkts[0]->ol_flags = _mm_extract_epi16(vlan0, 0);
+	rx_pkts[1]->ol_flags = _mm_extract_epi16(vlan0, 2);
+	rx_pkts[2]->ol_flags = _mm_extract_epi16(vlan0, 4);
+	rx_pkts[3]->ol_flags = _mm_extract_epi16(vlan0, 6);
 }
 #else
 #define desc_to_olflags_v(desc, rx_pkts) do {} while (0)
@@ -754,7 +762,8 @@ i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev *dev)
 #ifndef RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE
 	/* whithout rx ol_flags, no VP flag report */
 	if (rxmode->hw_vlan_strip != 0 ||
-	    rxmode->hw_vlan_extend != 0)
+	    rxmode->hw_vlan_extend != 0 ||
+	    rxmode->hw_ip_checksum != 0)
 		return -1;
 #endif
 
@@ -765,8 +774,7 @@ i40e_rx_vec_dev_conf_condition_check(struct rte_eth_dev *dev)
 	 /* - no csum error report support
 	 * - no header split support
 	 */
-	if (rxmode->hw_ip_checksum == 1 ||
-	    rxmode->header_split == 1)
+	if (rxmode->header_split == 1)
 		return -1;
 
 	return 0;
-- 
2.1.0

  reply	other threads:[~2016-10-06  2:38 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-14 16:59 [dpdk-dev] [PATCH 0/2] Add ptype and xsum handling in i40e rx vpmd Jeff Shaw
2016-07-14 16:59 ` [dpdk-dev] [PATCH 1/2] i40e: Add packet_type metadata in the i40e vPMD Jeff Shaw
2016-09-23  6:40   ` Zhang, Qi Z
2016-09-23  8:23     ` Thomas Monjalon
2016-09-26  1:46       ` Zhang, Qi Z
2016-10-05  1:29   ` Chen, Jing D
2016-10-06  0:12   ` [dpdk-dev] [PATCH v2 " Jeff Shaw
2016-10-05 21:26     ` Chen, Jing D
2016-10-06  0:12     ` [dpdk-dev] [PATCH v2 2/2] i40e: Enable bad checksum flags in " Jeff Shaw
2016-10-05 22:20       ` Chen, Jing D
2016-10-05 23:57       ` Chen, Jing D
2016-10-06  2:19         ` Jeff Shaw
2016-10-06  7:54           ` Damjan Marion (damarion)
2016-10-06  6:33       ` [dpdk-dev] [PATCH v3 1/2] i40e: Add packet_type metadata in the " Jeff Shaw
2016-10-06  6:38       ` [dpdk-dev] [PATCH v4 " Jeff Shaw
2016-10-06  6:38         ` Jeff Shaw [this message]
2016-10-06 15:30           ` [dpdk-dev] [PATCH v4 2/2] i40e: Enable bad checksum flags in " Chen, Jing D
2016-10-06 15:28         ` [dpdk-dev] [PATCH v4 1/2] i40e: Add packet_type metadata in the " Chen, Jing D
2016-10-12 15:51           ` Bruce Richardson
2016-07-14 16:59 ` [dpdk-dev] [PATCH 2/2] i40e: Enable bad checksum flags in " Jeff Shaw
2016-07-15 20:26 ` [dpdk-dev] [PATCH 0/2] Add ptype and xsum handling in i40e rx vpmd Thomas Monjalon
2016-09-01 14:47   ` Jeff Shaw
2016-09-14 13:22     ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1475735890-129160-2-git-send-email-jeffrey.b.shaw@intel.com \
    --to=jeffrey.b.shaw@intel.com \
    --cc=damarion@cisco.com \
    --cc=dev@dpdk.org \
    --cc=helin.zhang@intel.com \
    --cc=jing.d.chen@intel.com \
    --cc=jingjing.wu@intel.com \
    --cc=qi.z.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).