DPDK patches and discussions
 help / color / mirror / Atom feed
From: Rasesh Mody <rasesh.mody@qlogic.com>
To: <ferruh.yigit@intel.com>, <thomas.monjalon@6wind.com>,
	<bruce.richardson@intel.com>
Cc: <dev@dpdk.org>, <Dept-EngDPDKDev@qlogic.com>,
	Harish Patil <harish.patil@qlogic.com>
Subject: [dpdk-dev] [PATCH v4 16/32] net/qede: fix port (re)configuration issue
Date: Tue, 18 Oct 2016 21:11:30 -0700	[thread overview]
Message-ID: <1476850306-2141-17-git-send-email-rasesh.mody@qlogic.com> (raw)
In-Reply-To: <1476850306-2141-1-git-send-email-rasesh.mody@qlogic.com>

From: Harish Patil <harish.patil@qlogic.com>

Some applications set port configuration params like promisc mode
before calling dev_start(). This config results in a firmware exception
since this operation internally translates to sending of VPORT-UPDATE
before VPORT-START ramrod which is considered illegal from firmware
standpoint. So the fix is to send VPORT-START ramrod sooner
in dev_configure() rather than deferring it to dev_start().
This requires a bit of reshuffling in the code to move sending of
VPORT-START from qede_start_queues() to qede_dev_configure()
and VPORT-STOP from qede_stop_queues() to qede_dev_stop().

This sequence change also exposes a flaw in the port restart
flows where the fastpath resource allocation routine qede_init_fp()
functionalities need to be split, so that appropriate action is taken
based on the current port state. Eg: Do not re-initialize the status
block in a port restart case. This change ensures port start/stop
can be paired.

A new port state QEDE_DEV_CONFIG is added to distinguish between
port started from scratch vs port requiring a reconfig (like MTU).
The function qede_config_rx_mode() is removed since the individual
port config will be replayed anyways on a restart.

Fixes: 2ea6f76aff40 ("qede: add core driver")

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
---
 drivers/net/qede/qede_eth_if.c |  14 ++-
 drivers/net/qede/qede_eth_if.h |   2 +
 drivers/net/qede/qede_ethdev.c | 130 ++++++++++++-----------
 drivers/net/qede/qede_ethdev.h |  12 +--
 drivers/net/qede/qede_rxtx.c   | 232 +++++++++++++++++++++--------------------
 drivers/net/qede/qede_rxtx.h   |   7 +-
 6 files changed, 208 insertions(+), 189 deletions(-)

diff --git a/drivers/net/qede/qede_eth_if.c b/drivers/net/qede/qede_eth_if.c
index a00f05d..e108af1 100644
--- a/drivers/net/qede/qede_eth_if.c
+++ b/drivers/net/qede/qede_eth_if.c
@@ -40,8 +40,6 @@ qed_start_vport(struct ecore_dev *edev, struct qed_start_vport_params *p_params)
 			return rc;
 		}
 
-		ecore_hw_start_fastpath(p_hwfn);
-
 		DP_VERBOSE(edev, ECORE_MSG_SPQ,
 			   "Started V-PORT %d with MTU %d\n",
 			   p_params->vport_id, p_params->mtu);
@@ -295,6 +293,17 @@ static int qed_fastpath_stop(struct ecore_dev *edev)
 	return 0;
 }
 
+static void qed_fastpath_start(struct ecore_dev *edev)
+{
+	struct ecore_hwfn *p_hwfn;
+	int i;
+
+	for_each_hwfn(edev, i) {
+		p_hwfn = &edev->hwfns[i];
+		ecore_hw_start_fastpath(p_hwfn);
+	}
+}
+
 static void
 qed_get_vport_stats(struct ecore_dev *edev, struct ecore_eth_stats *stats)
 {
@@ -444,6 +453,7 @@ static const struct qed_eth_ops qed_eth_ops_pass = {
 	INIT_STRUCT_FIELD(q_tx_stop, &qed_stop_txq),
 	INIT_STRUCT_FIELD(eth_cqe_completion, &qed_fp_cqe_completion),
 	INIT_STRUCT_FIELD(fastpath_stop, &qed_fastpath_stop),
+	INIT_STRUCT_FIELD(fastpath_start, &qed_fastpath_start),
 	INIT_STRUCT_FIELD(get_vport_stats, &qed_get_vport_stats),
 	INIT_STRUCT_FIELD(filter_config, &qed_configure_filter),
 };
diff --git a/drivers/net/qede/qede_eth_if.h b/drivers/net/qede/qede_eth_if.h
index 26968eb..299a2aa 100644
--- a/drivers/net/qede/qede_eth_if.h
+++ b/drivers/net/qede/qede_eth_if.h
@@ -158,6 +158,8 @@ struct qed_eth_ops {
 
 	int (*fastpath_stop)(struct ecore_dev *edev);
 
+	void (*fastpath_start)(struct ecore_dev *edev);
+
 	void (*get_vport_stats)(struct ecore_dev *edev,
 				struct ecore_eth_stats *stats);
 
diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
index e2141cb..ec5e8a2 100644
--- a/drivers/net/qede/qede_ethdev.c
+++ b/drivers/net/qede/qede_ethdev.c
@@ -348,52 +348,6 @@ static void qede_config_accept_any_vlan(struct qede_dev *qdev, bool action)
 	}
 }
 
-void qede_config_rx_mode(struct rte_eth_dev *eth_dev)
-{
-	struct qede_dev *qdev = eth_dev->data->dev_private;
-	struct ecore_dev *edev = &qdev->edev;
-	/* TODO: - QED_FILTER_TYPE_UCAST */
-	enum qed_filter_rx_mode_type accept_flags =
-			QED_FILTER_RX_MODE_TYPE_REGULAR;
-	struct qed_filter_params rx_mode;
-	int rc;
-
-	/* Configure the struct for the Rx mode */
-	memset(&rx_mode, 0, sizeof(struct qed_filter_params));
-	rx_mode.type = QED_FILTER_TYPE_RX_MODE;
-
-	rc = qede_set_ucast_rx_mac(qdev, QED_FILTER_XCAST_TYPE_REPLACE,
-				   eth_dev->data->mac_addrs[0].addr_bytes);
-	if (rte_eth_promiscuous_get(eth_dev->data->port_id) == 1) {
-		accept_flags = QED_FILTER_RX_MODE_TYPE_PROMISC;
-	} else {
-		rc = qede_set_ucast_rx_mac(qdev, QED_FILTER_XCAST_TYPE_ADD,
-					   eth_dev->data->
-					   mac_addrs[0].addr_bytes);
-		if (rc) {
-			DP_ERR(edev, "Unable to add filter\n");
-			return;
-		}
-	}
-
-	/* take care of VLAN mode */
-	if (rte_eth_promiscuous_get(eth_dev->data->port_id) == 1) {
-		qede_config_accept_any_vlan(qdev, true);
-	} else if (!qdev->non_configured_vlans) {
-		/* If we dont have non-configured VLANs and promisc
-		 * is not set, then check if we need to disable
-		 * accept_any_vlan mode.
-		 * Because in this case, accept_any_vlan mode is set
-		 * as part of IFF_RPOMISC flag handling.
-		 */
-		qede_config_accept_any_vlan(qdev, false);
-	}
-	rx_mode.filter.accept_flags = accept_flags;
-	rc = qdev->ops->filter_config(edev, &rx_mode);
-	if (rc)
-		DP_ERR(edev, "Filter config failed rc=%d\n", rc);
-}
-
 static int qede_vlan_stripping(struct rte_eth_dev *eth_dev, bool set_stripping)
 {
 	struct qed_update_vport_params vport_update_params;
@@ -488,11 +442,39 @@ static int qede_vlan_filter_set(struct rte_eth_dev *eth_dev,
 	return rc;
 }
 
+static int qede_init_vport(struct qede_dev *qdev)
+{
+	struct ecore_dev *edev = &qdev->edev;
+	struct qed_start_vport_params start = {0};
+	int rc;
+
+	start.remove_inner_vlan = 1;
+	start.gro_enable = 0;
+	start.mtu = ETHER_MTU + QEDE_ETH_OVERHEAD;
+	start.vport_id = 0;
+	start.drop_ttl0 = false;
+	start.clear_stats = 1;
+	start.handle_ptp_pkts = 0;
+
+	rc = qdev->ops->vport_start(edev, &start);
+	if (rc) {
+		DP_ERR(edev, "Start V-PORT failed %d\n", rc);
+		return rc;
+	}
+
+	DP_INFO(edev,
+		"Start vport ramrod passed, vport_id = %d, MTU = %u\n",
+		start.vport_id, ETHER_MTU);
+
+	return 0;
+}
+
 static int qede_dev_configure(struct rte_eth_dev *eth_dev)
 {
 	struct qede_dev *qdev = eth_dev->data->dev_private;
 	struct ecore_dev *edev = &qdev->edev;
 	struct rte_eth_rxmode *rxmode = &eth_dev->data->dev_conf.rxmode;
+	int rc;
 
 	PMD_INIT_FUNC_TRACE(edev);
 
@@ -517,11 +499,7 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev)
 	qdev->fp_num_rx = eth_dev->data->nb_rx_queues;
 	qdev->num_queues = qdev->fp_num_tx + qdev->fp_num_rx;
 
-	/* Initial state */
-	qdev->state = QEDE_CLOSE;
-
 	/* Sanity checks and throw warnings */
-
 	if (rxmode->enable_scatter == 1) {
 		DP_ERR(edev, "RX scatter packets is not supported\n");
 		return -EINVAL;
@@ -539,16 +517,33 @@ static int qede_dev_configure(struct rte_eth_dev *eth_dev)
 		DP_INFO(edev, "IP/UDP/TCP checksum offload is always enabled "
 			      "in hw\n");
 
+	/* Check for the port restart case */
+	if (qdev->state != QEDE_DEV_INIT) {
+		rc = qdev->ops->vport_stop(edev, 0);
+		if (rc != 0)
+			return rc;
+		qede_dealloc_fp_resc(eth_dev);
+	}
+
+	/* Fastpath status block should be initialized before sending
+	 * VPORT-START in the case of VF. Anyway, do it for both VF/PF.
+	 */
+	rc = qede_alloc_fp_resc(qdev);
+	if (rc != 0)
+		return rc;
+
+	/* Issue VPORT-START with default config values to allow
+	 * other port configurations early on.
+	 */
+	rc = qede_init_vport(qdev);
+	if (rc != 0)
+		return rc;
 
-	DP_INFO(edev, "Allocated %d RSS queues on %d TC/s\n",
-		QEDE_RSS_CNT(qdev), qdev->num_tc);
+	/* Add primary mac for PF */
+	if (IS_PF(edev))
+		qede_mac_addr_set(eth_dev, &qdev->primary_mac);
 
-	DP_INFO(edev, "my_id %u rel_pf_id %u abs_pf_id %u"
-		" port %u first_on_engine %d\n",
-		edev->hwfns[0].my_id,
-		edev->hwfns[0].rel_pf_id,
-		edev->hwfns[0].abs_pf_id,
-		edev->hwfns[0].port_id, edev->hwfns[0].first_on_engine);
+	qdev->state = QEDE_DEV_CONFIG;
 
 	return 0;
 }
@@ -719,8 +714,9 @@ static void qede_poll_sp_sb_cb(void *param)
 
 static void qede_dev_close(struct rte_eth_dev *eth_dev)
 {
-	struct qede_dev *qdev = eth_dev->data->dev_private;
-	struct ecore_dev *edev = &qdev->edev;
+	struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
+	struct ecore_dev *edev = QEDE_INIT_EDEV(qdev);
+	int rc;
 
 	PMD_INIT_FUNC_TRACE(edev);
 
@@ -729,16 +725,16 @@ static void qede_dev_close(struct rte_eth_dev *eth_dev)
 	 * by the app without reconfiguration. However, in dev_close() we
 	 * can release all the resources and device can be brought up newly
 	 */
-	if (qdev->state != QEDE_STOP)
+	if (qdev->state != QEDE_DEV_STOP)
 		qede_dev_stop(eth_dev);
 	else
 		DP_INFO(edev, "Device is already stopped\n");
 
-	qede_free_mem_load(qdev);
-
-	qede_free_fp_arrays(qdev);
+	rc = qdev->ops->vport_stop(edev, 0);
+	if (rc != 0)
+		DP_ERR(edev, "Failed to stop VPORT\n");
 
-	qede_dev_set_link_state(eth_dev, false);
+	qede_dealloc_fp_resc(eth_dev);
 
 	qdev->ops->common->slowpath_stop(edev);
 
@@ -752,7 +748,7 @@ static void qede_dev_close(struct rte_eth_dev *eth_dev)
 	if (edev->num_hwfns > 1)
 		rte_eal_alarm_cancel(qede_poll_sp_sb_cb, (void *)eth_dev);
 
-	qdev->state = QEDE_CLOSE;
+	qdev->state = QEDE_DEV_INIT; /* Go back to init state */
 }
 
 static void
@@ -1388,6 +1384,8 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf)
 		do_once = false;
 	}
 
+	adapter->state = QEDE_DEV_INIT;
+
 	DP_NOTICE(edev, false, "MAC address : %02x:%02x:%02x:%02x:%02x:%02x\n",
 		  adapter->primary_mac.addr_bytes[0],
 		  adapter->primary_mac.addr_bytes[1],
diff --git a/drivers/net/qede/qede_ethdev.h b/drivers/net/qede/qede_ethdev.h
index 1f62283..f0bb720 100644
--- a/drivers/net/qede/qede_ethdev.h
+++ b/drivers/net/qede/qede_ethdev.h
@@ -109,10 +109,11 @@
 extern char fw_file[];
 
 /* Port/function states */
-enum dev_state {
-	QEDE_START,
-	QEDE_STOP,
-	QEDE_CLOSE
+enum qede_dev_state {
+	QEDE_DEV_INIT, /* Init the chip and Slowpath */
+	QEDE_DEV_CONFIG, /* Create Vport/Fastpath resources */
+	QEDE_DEV_START, /* Start RX/TX queues, enable traffic */
+	QEDE_DEV_STOP, /* Deactivate vport and stop traffic */
 };
 
 struct qed_int_param {
@@ -148,7 +149,7 @@ struct qede_dev {
 	uint8_t fp_num_tx;
 	uint8_t fp_num_rx;
 
-	enum dev_state state;
+	enum qede_dev_state state;
 
 	/* Vlans */
 	osal_list_t vlan_list;
@@ -165,6 +166,5 @@ struct qede_dev {
 int qed_fill_eth_dev_info(struct ecore_dev *edev,
 				 struct qed_dev_eth_info *info);
 int qede_dev_set_link_state(struct rte_eth_dev *eth_dev, bool link_up);
-void qede_config_rx_mode(struct rte_eth_dev *eth_dev);
 
 #endif /* _QEDE_ETHDEV_H_ */
diff --git a/drivers/net/qede/qede_rxtx.c b/drivers/net/qede/qede_rxtx.c
index 00584a9..e3409a9 100644
--- a/drivers/net/qede/qede_rxtx.c
+++ b/drivers/net/qede/qede_rxtx.c
@@ -324,11 +324,10 @@ qede_tx_queue_setup(struct rte_eth_dev *dev,
 }
 
 /* This function inits fp content and resets the SB, RXQ and TXQ arrays */
-static void qede_init_fp(struct rte_eth_dev *eth_dev)
+static void qede_init_fp(struct qede_dev *qdev)
 {
 	struct qede_fastpath *fp;
-	uint8_t i, rss_id, index, tc;
-	struct qede_dev *qdev = eth_dev->data->dev_private;
+	uint8_t i, rss_id, tc;
 	int fp_rx = qdev->fp_num_rx, rxq = 0, txq = 0;
 
 	memset((void *)qdev->fp_array, 0, (QEDE_QUEUE_CNT(qdev) *
@@ -343,30 +342,9 @@ static void qede_init_fp(struct rte_eth_dev *eth_dev)
 		} else{
 			fp->type = QEDE_FASTPATH_TX;
 		}
-	}
-
-	for_each_queue(i) {
-		fp = &qdev->fp_array[i];
 		fp->qdev = qdev;
 		fp->id = i;
-
-		/* Point rxq to generic rte queues that was created
-		 * as part of queue creation.
-		 */
-		if (fp->type & QEDE_FASTPATH_RX) {
-			fp->rxq = eth_dev->data->rx_queues[i];
-			fp->rxq->queue_id = rxq++;
-		}
 		fp->sb_info = &qdev->sb_array[i];
-
-		if (fp->type & QEDE_FASTPATH_TX) {
-			for (tc = 0; tc < qdev->num_tc; tc++) {
-				index = tc * QEDE_TSS_CNT(qdev) + txq;
-				fp->txqs[tc] = eth_dev->data->tx_queues[index];
-				fp->txqs[tc]->queue_id = index;
-			}
-			txq++;
-		}
 		snprintf(fp->name, sizeof(fp->name), "%s-fp-%d", "qdev", i);
 	}
 
@@ -444,6 +422,39 @@ qede_alloc_mem_sb(struct qede_dev *qdev, struct ecore_sb_info *sb_info,
 	return 0;
 }
 
+int qede_alloc_fp_resc(struct qede_dev *qdev)
+{
+	struct qede_fastpath *fp;
+	int rc, i;
+
+	if (qdev->fp_array)
+		qede_free_fp_arrays(qdev);
+
+	rc = qede_alloc_fp_array(qdev);
+	if (rc != 0)
+		return rc;
+
+	qede_init_fp(qdev);
+
+	for (i = 0; i < QEDE_QUEUE_CNT(qdev); i++) {
+		fp = &qdev->fp_array[i];
+		if (qede_alloc_mem_sb(qdev, fp->sb_info, i)) {
+			qede_free_fp_arrays(qdev);
+			return -ENOMEM;
+		}
+	}
+
+	return 0;
+}
+
+void qede_dealloc_fp_resc(struct rte_eth_dev *eth_dev)
+{
+	struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
+
+	qede_free_mem_load(eth_dev);
+	qede_free_fp_arrays(qdev);
+}
+
 static inline void
 qede_update_rx_prod(struct qede_dev *edev, struct qede_rx_queue *rxq)
 {
@@ -564,43 +575,21 @@ static int qede_start_queues(struct rte_eth_dev *eth_dev, bool clear_stats)
 	struct qed_update_vport_rss_params *rss_params = &qdev->rss_params;
 	struct qed_dev_info *qed_info = &qdev->dev_info.common;
 	struct qed_update_vport_params vport_update_params;
-	struct qed_start_vport_params start = { 0 };
+	struct qede_tx_queue *txq;
+	struct qede_fastpath *fp;
+	dma_addr_t p_phys_table;
+	int txq_index;
+	uint16_t page_cnt;
 	int vlan_removal_en = 1;
 	int rc, tc, i;
 
-	if (!qdev->fp_num_rx) {
-		DP_ERR(edev,
-		       "Cannot update V-VPORT as active as "
-		       "there are no Rx queues\n");
-		return -EINVAL;
-	}
-
-	start.remove_inner_vlan = vlan_removal_en;
-	start.gro_enable = !qdev->gro_disable;
-	start.mtu = qdev->mtu;
-	start.vport_id = 0;
-	start.drop_ttl0 = true;
-	start.clear_stats = clear_stats;
-
-	rc = qdev->ops->vport_start(edev, &start);
-	if (rc) {
-		DP_ERR(edev, "Start V-PORT failed %d\n", rc);
-		return rc;
-	}
-
-	DP_INFO(edev,
-		"Start vport ramrod passed, vport_id = %d,"
-		" MTU = %d, vlan_removal_en = %d\n",
-		start.vport_id, qdev->mtu, vlan_removal_en);
-
 	for_each_queue(i) {
-		struct qede_fastpath *fp = &qdev->fp_array[i];
-		dma_addr_t tbl;
-		uint16_t cnt;
-
+		fp = &qdev->fp_array[i];
 		if (fp->type & QEDE_FASTPATH_RX) {
-			tbl = ecore_chain_get_pbl_phys(&fp->rxq->rx_comp_ring);
-			cnt = ecore_chain_get_page_cnt(&fp->rxq->rx_comp_ring);
+			p_phys_table = ecore_chain_get_pbl_phys(&fp->rxq->
+								rx_comp_ring);
+			page_cnt = ecore_chain_get_page_cnt(&fp->rxq->
+								rx_comp_ring);
 
 			ecore_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0);
 
@@ -610,17 +599,17 @@ static int qede_start_queues(struct rte_eth_dev *eth_dev, bool clear_stats)
 					   RX_PI,
 					   fp->rxq->rx_buf_size,
 					   fp->rxq->rx_bd_ring.p_phys_addr,
-					   tbl,
-					   cnt,
-			&fp->rxq->hw_rxq_prod_addr);
+					   p_phys_table,
+					   page_cnt,
+					   &fp->rxq->hw_rxq_prod_addr);
 			if (rc) {
-				DP_ERR(edev,
-				       "Start rxq #%d failed %d\n",
+				DP_ERR(edev, "Start rxq #%d failed %d\n",
 				       fp->rxq->queue_id, rc);
-			return rc;
-		}
+				return rc;
+			}
 
-		fp->rxq->hw_cons_ptr = &fp->sb_info->sb_virt->pi_array[RX_PI];
+			fp->rxq->hw_cons_ptr =
+					&fp->sb_info->sb_virt->pi_array[RX_PI];
 
 			qede_update_rx_prod(qdev, fp->rxq);
 		}
@@ -628,16 +617,16 @@ static int qede_start_queues(struct rte_eth_dev *eth_dev, bool clear_stats)
 		if (!(fp->type & QEDE_FASTPATH_TX))
 			continue;
 		for (tc = 0; tc < qdev->num_tc; tc++) {
-			struct qede_tx_queue *txq = fp->txqs[tc];
-			int txq_index = tc * QEDE_RSS_CNT(qdev) + i;
+			txq = fp->txqs[tc];
+			txq_index = tc * QEDE_RSS_CNT(qdev) + i;
 
-			tbl = ecore_chain_get_pbl_phys(&txq->tx_pbl);
-			cnt = ecore_chain_get_page_cnt(&txq->tx_pbl);
+			p_phys_table = ecore_chain_get_pbl_phys(&txq->tx_pbl);
+			page_cnt = ecore_chain_get_page_cnt(&txq->tx_pbl);
 			rc = qdev->ops->q_tx_start(edev, i, txq->queue_id,
 						   0,
 						   fp->sb_info->igu_sb_id,
 						   TX_PI(tc),
-						   tbl, cnt,
+						   p_phys_table, page_cnt,
 						   &txq->doorbell_addr);
 			if (rc) {
 				DP_ERR(edev, "Start txq %u failed %d\n",
@@ -661,7 +650,7 @@ static int qede_start_queues(struct rte_eth_dev *eth_dev, bool clear_stats)
 
 	/* Prepare and send the vport enable */
 	memset(&vport_update_params, 0, sizeof(vport_update_params));
-	vport_update_params.vport_id = start.vport_id;
+	vport_update_params.vport_id = 0;
 	vport_update_params.update_vport_active_flg = 1;
 	vport_update_params.vport_active_flg = 1;
 
@@ -1116,6 +1105,32 @@ qede_xmit_pkts(void *p_txq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
 	return nb_pkt_sent;
 }
 
+static void qede_init_fp_queue(struct rte_eth_dev *eth_dev)
+{
+	struct qede_dev *qdev = eth_dev->data->dev_private;
+	struct qede_fastpath *fp;
+	uint8_t i, rss_id, txq_index, tc;
+	int rxq = 0, txq = 0;
+
+	for_each_queue(i) {
+		fp = &qdev->fp_array[i];
+		if (fp->type & QEDE_FASTPATH_RX) {
+			fp->rxq = eth_dev->data->rx_queues[i];
+			fp->rxq->queue_id = rxq++;
+		}
+
+		if (fp->type & QEDE_FASTPATH_TX) {
+			for (tc = 0; tc < qdev->num_tc; tc++) {
+				txq_index = tc * QEDE_TSS_CNT(qdev) + txq;
+				fp->txqs[tc] =
+					eth_dev->data->tx_queues[txq_index];
+				fp->txqs[tc]->queue_id = txq_index;
+			}
+			txq++;
+		}
+	}
+}
+
 int qede_dev_start(struct rte_eth_dev *eth_dev)
 {
 	struct qede_dev *qdev = eth_dev->data->dev_private;
@@ -1126,47 +1141,34 @@ int qede_dev_start(struct rte_eth_dev *eth_dev)
 
 	DP_INFO(edev, "Device state is %d\n", qdev->state);
 
-	switch (qdev->state) {
-	case QEDE_START:
-		DP_INFO(edev, "Device already started\n");
+	if (qdev->state == QEDE_DEV_START) {
+		DP_INFO(edev, "Port is already started\n");
 		return 0;
-	case QEDE_CLOSE:
-		if (qede_alloc_fp_array(qdev))
-			return -ENOMEM;
-		qede_init_fp(eth_dev);
-		/* Fall-thru */
-	case QEDE_STOP:
-		for (i = 0; i < QEDE_QUEUE_CNT(qdev); i++) {
-			fp = &qdev->fp_array[i];
-			if (qede_alloc_mem_sb(qdev, fp->sb_info, i))
-				return -ENOMEM;
-		}
-		break;
-	default:
-		DP_INFO(edev, "Unknown state for port %u\n",
-			eth_dev->data->port_id);
-		return -EINVAL;
 	}
 
+	if (qdev->state == QEDE_DEV_CONFIG)
+		qede_init_fp_queue(eth_dev);
+
 	rc = qede_start_queues(eth_dev, true);
 	if (rc) {
 		DP_ERR(edev, "Failed to start queues\n");
 		/* TBD: free */
 		return rc;
 	}
-	DP_INFO(edev, "Allocated %d RSS queues on %d TC/s\n",
-		QEDE_RSS_CNT(qdev), qdev->num_tc);
 
 	/* Bring-up the link */
 	qede_dev_set_link_state(eth_dev, true);
-	qdev->state = QEDE_START;
-	qede_config_rx_mode(eth_dev);
 
-	/* Init the queues */
+	/* Reset ring */
 	if (qede_reset_fp_rings(qdev))
 		return -ENOMEM;
 
-	DP_INFO(edev, "dev_state is QEDE_START\n");
+	/* Start/resume traffic */
+	qdev->ops->fastpath_start(edev);
+
+	qdev->state = QEDE_DEV_START;
+
+	DP_INFO(edev, "dev_state is QEDE_DEV_START\n");
 
 	return 0;
 }
@@ -1222,7 +1224,7 @@ static int qede_stop_queues(struct qede_dev *qdev)
 	vport_update_params.vport_active_flg = 0;
 	vport_update_params.update_rss_flg = 0;
 
-	DP_INFO(edev, "vport_update\n");
+	DP_INFO(edev, "Deactivate vport\n");
 
 	rc = qdev->ops->vport_update(edev, &vport_update_params);
 	if (rc) {
@@ -1288,14 +1290,7 @@ static int qede_stop_queues(struct qede_dev *qdev)
 		}
 	}
 
-	DP_INFO(edev, "Stopping vports\n");
-
-	/* Stop the vport */
-	rc = qdev->ops->vport_stop(edev, 0);
-	if (rc)
-		DP_ERR(edev, "Failed to stop VPORT\n");
-
-	return rc;
+	return 0;
 }
 
 int qede_reset_fp_rings(struct qede_dev *qdev)
@@ -1306,15 +1301,17 @@ int qede_reset_fp_rings(struct qede_dev *qdev)
 	uint16_t id, i;
 
 	for_each_queue(id) {
-		DP_INFO(&qdev->edev, "Reset FP chain for RSS %u\n", id);
 		fp = &qdev->fp_array[id];
 
 		if (fp->type & QEDE_FASTPATH_RX) {
+			DP_INFO(&qdev->edev,
+				"Reset FP chain for RSS %u\n", id);
 			qede_rx_queue_release_mbufs(fp->rxq);
 			ecore_chain_reset(&fp->rxq->rx_bd_ring);
 			ecore_chain_reset(&fp->rxq->rx_comp_ring);
 			fp->rxq->sw_rx_prod = 0;
 			fp->rxq->sw_rx_cons = 0;
+			*fp->rxq->hw_cons_ptr = 0;
 			for (i = 0; i < fp->rxq->nb_rx_desc; i++) {
 				if (qede_alloc_rx_buffer(fp->rxq)) {
 					DP_ERR(&qdev->edev,
@@ -1329,6 +1326,7 @@ int qede_reset_fp_rings(struct qede_dev *qdev)
 				ecore_chain_reset(&txq->tx_pbl);
 				txq->sw_tx_cons = 0;
 				txq->sw_tx_prod = 0;
+				*txq->hw_cons_ptr = 0;
 			}
 		}
 	}
@@ -1337,24 +1335,30 @@ int qede_reset_fp_rings(struct qede_dev *qdev)
 }
 
 /* This function frees all memory of a single fp */
-static void qede_free_mem_fp(struct qede_dev *qdev, struct qede_fastpath *fp)
+static void qede_free_mem_fp(struct rte_eth_dev *eth_dev,
+			     struct qede_fastpath *fp)
 {
+	struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
 	uint8_t tc;
 
 	qede_rx_queue_release(fp->rxq);
-	for (tc = 0; tc < qdev->num_tc; tc++)
+	for (tc = 0; tc < qdev->num_tc; tc++) {
 		qede_tx_queue_release(fp->txqs[tc]);
+		eth_dev->data->tx_queues[tc] = NULL;
+	}
 }
 
-void qede_free_mem_load(struct qede_dev *qdev)
+void qede_free_mem_load(struct rte_eth_dev *eth_dev)
 {
+	struct qede_dev *qdev = QEDE_INIT_QDEV(eth_dev);
+	struct qede_fastpath *fp;
 	uint8_t rss_id;
 
 	for_each_queue(rss_id) {
-		struct qede_fastpath *fp = &qdev->fp_array[rss_id];
-		qede_free_mem_fp(qdev, fp);
+		fp = &qdev->fp_array[rss_id];
+		qede_free_mem_fp(eth_dev, fp);
+		eth_dev->data->rx_queues[rss_id] = NULL;
 	}
-	/* qdev->num_rss = 0; */
 }
 
 void qede_dev_stop(struct rte_eth_dev *eth_dev)
@@ -1364,7 +1368,7 @@ void qede_dev_stop(struct rte_eth_dev *eth_dev)
 
 	DP_INFO(edev, "port %u\n", eth_dev->data->port_id);
 
-	if (qdev->state != QEDE_START) {
+	if (qdev->state != QEDE_DEV_START) {
 		DP_INFO(edev, "Device not yet started\n");
 		return;
 	}
@@ -1379,7 +1383,7 @@ void qede_dev_stop(struct rte_eth_dev *eth_dev)
 	/* Bring the link down */
 	qede_dev_set_link_state(eth_dev, false);
 
-	qdev->state = QEDE_STOP;
+	qdev->state = QEDE_DEV_STOP;
 
-	DP_INFO(edev, "dev_state is QEDE_STOP\n");
+	DP_INFO(edev, "dev_state is QEDE_DEV_STOP\n");
 }
diff --git a/drivers/net/qede/qede_rxtx.h b/drivers/net/qede/qede_rxtx.h
index a8520ed..9ee69ed 100644
--- a/drivers/net/qede/qede_rxtx.h
+++ b/drivers/net/qede/qede_rxtx.h
@@ -173,7 +173,7 @@ int qede_reset_fp_rings(struct qede_dev *qdev);
 
 void qede_free_fp_arrays(struct qede_dev *qdev);
 
-void qede_free_mem_load(struct qede_dev *qdev);
+void qede_free_mem_load(struct rte_eth_dev *eth_dev);
 
 uint16_t qede_xmit_pkts(void *p_txq, struct rte_mbuf **tx_pkts,
 			uint16_t nb_pkts);
@@ -181,4 +181,9 @@ uint16_t qede_xmit_pkts(void *p_txq, struct rte_mbuf **tx_pkts,
 uint16_t qede_recv_pkts(void *p_rxq, struct rte_mbuf **rx_pkts,
 			uint16_t nb_pkts);
 
+/* Fastpath resource alloc/dealloc helpers */
+int qede_alloc_fp_resc(struct qede_dev *qdev);
+
+void qede_dealloc_fp_resc(struct rte_eth_dev *eth_dev);
+
 #endif /* _QEDE_RXTX_H_ */
-- 
1.8.3.1

  parent reply	other threads:[~2016-10-19  4:13 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-19  4:11 [dpdk-dev] [PATCH v4 00/32] net/qede: update qede pmd to 1.2.0.1 and enable by default Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 01/32] net/qede/base: add new init files and rearrange the code Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 02/32] net/qede/base: formatting changes Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 03/32] net/qede: use FW CONFIG defines as needed Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 04/32] net/qede/base: add HSI changes and register defines Rasesh Mody
2016-10-19 12:37   ` Ferruh Yigit
2016-10-19 13:46     ` Mody, Rasesh
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 05/32] net/qede/base: add attention formatting string Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 06/32] net/qede/base: additional formatting/comment changes Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 07/32] net/qede: fix 32 bit compilation Rasesh Mody
2016-10-26 16:54   ` Thomas Monjalon
2016-10-26 21:01     ` Mody, Rasesh
2016-10-26 21:40       ` Thomas Monjalon
2016-10-28  6:37         ` [dpdk-dev] [PATCH] net/qede: fix gcc compiler option checks Rasesh Mody
2016-10-28 22:12           ` Stephen Hemminger
2016-10-28 22:49             ` Mody, Rasesh
2016-11-07 19:54               ` Thomas Monjalon
2016-11-07 20:10           ` Thomas Monjalon
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 08/32] net/qede: change signature of MCP command API Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 09/32] net/qede: serialize access to MFW mbox Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 10/32] net/qede: add NIC selftest and query sensor info support Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 11/32] net/qede/base: update base driver Rasesh Mody
2021-03-24 14:07   ` Ferruh Yigit
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 12/32] net/qede/base: rename structure and defines Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 13/32] net/qede/base: comment enhancements Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 14/32] net/qede/base: add MFW crash dump support Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 15/32] net/qede: enable support for unequal number of Rx/Tx queues Rasesh Mody
2016-10-19  4:11 ` Rasesh Mody [this message]
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 17/32] net/qede/base: allow MTU change via vport-update Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 18/32] net/qede: add missing 100G link speed capability Rasesh Mody
2016-10-26 15:41   ` Thomas Monjalon
2016-10-26 15:54     ` Bruce Richardson
2016-10-26 21:28     ` Harish Patil
2016-10-26 21:43       ` Thomas Monjalon
2016-10-28  6:42         ` [dpdk-dev] [PATCH] net/qede: fix advertising " Rasesh Mody
2016-10-28  7:26           ` Thomas Monjalon
2016-10-29  1:11             ` Harish Patil
2016-10-29  6:14             ` [dpdk-dev] [PATCH v2] " Rasesh Mody
2016-10-31 18:35               ` [dpdk-dev] [PATCH v3] " Rasesh Mody
2016-10-31 18:35                 ` Rasesh Mody
2016-11-07 19:48                   ` Thomas Monjalon
2016-11-10  2:54                     ` Harish Patil
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 19/32] net/qede: remove unused/dead code Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 20/32] net/qede: fixes for VLAN filters Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 21/32] net/qede: add enable/disable VLAN filtering Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 22/32] net/qede: fix RSS related issues Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 23/32] net/qede: add scatter gather support Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 24/32] net/qede/base: change Rx Tx queue start APIs Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 25/32] net/qede/base: add support to initiate PF FLR Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 26/32] net/qede: skip slowpath polling for 100G VF device Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 27/32] net/qede: fix driver version string Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 28/32] net/qede: fix status block index for VF queues Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 29/32] net/qede: add support for queue statistics Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 30/32] net/qede: remove zlib dependency and enable PMD by default Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 31/32] doc: update qede pmd documentation Rasesh Mody
2016-10-19  4:11 ` [dpdk-dev] [PATCH v4 32/32] net/qede: update driver version Rasesh Mody
2016-10-24 13:41 ` [dpdk-dev] [PATCH v4 00/32] net/qede: update qede pmd to 1.2.0.1 and enable by default Bruce Richardson
2016-10-26 15:20   ` Thomas Monjalon
2016-10-26 17:01     ` Mody, Rasesh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1476850306-2141-17-git-send-email-rasesh.mody@qlogic.com \
    --to=rasesh.mody@qlogic.com \
    --cc=Dept-EngDPDKDev@qlogic.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=harish.patil@qlogic.com \
    --cc=thomas.monjalon@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).