DPDK patches and discussions
 help / color / mirror / Atom feed
From: Wenzhuo Lu <wenzhuo.lu@intel.com>
To: dev@dpdk.org
Cc: Wenzhuo Lu <wenzhuo.lu@intel.com>
Subject: [dpdk-dev] [PATCH 10/16] e1000/base: workaround for ULP entry flow
Date: Wed, 23 Nov 2016 12:22:54 -0500	[thread overview]
Message-ID: <1479921780-9813-11-git-send-email-wenzhuo.lu@intel.com> (raw)
In-Reply-To: <1479921780-9813-1-git-send-email-wenzhuo.lu@intel.com>

For i217 revision 6, when entering Ultra Low Power (ULP)
we need to enable Low Power Link Up (LPLU) and disable Gig
speed to make it work.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
 drivers/net/e1000/base/e1000_ich8lan.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/net/e1000/base/e1000_ich8lan.c b/drivers/net/e1000/base/e1000_ich8lan.c
index 0ac982c..0837a40 100644
--- a/drivers/net/e1000/base/e1000_ich8lan.c
+++ b/drivers/net/e1000/base/e1000_ich8lan.c
@@ -1068,6 +1068,7 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
 	u32 mac_reg;
 	s32 ret_val = E1000_SUCCESS;
 	u16 phy_reg;
+	u16 oem_reg = 0;
 
 	if ((hw->mac.type < e1000_pch_lpt) ||
 	    (hw->device_id == E1000_DEV_ID_PCH_LPT_I217_LM) ||
@@ -1128,6 +1129,25 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
 	mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
 	E1000_WRITE_REG(hw, E1000_CTRL_EXT, mac_reg);
 
+	/* Si workaround for ULP entry flow on i127/rev6 h/w.  Enable
+	 * LPLU and disable Gig speed when entering ULP
+	 */
+	if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) {
+		ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS,
+						       &oem_reg);
+		if (ret_val)
+			goto release;
+
+		phy_reg = oem_reg;
+		phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS;
+
+		ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
+							phy_reg);
+
+		if (ret_val)
+			goto release;
+	}
+
 skip_smbus:
 	if (!to_sx) {
 		/* Change the 'Link Status Change' interrupt to trigger
@@ -1184,6 +1204,14 @@ skip_smbus:
 		E1000_WRITE_REG(hw, E1000_TCTL, mac_reg);
 	}
 
+	if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) &&
+	    to_sx && (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) {
+		ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS,
+							oem_reg);
+		if (ret_val)
+			goto release;
+	}
+
 release:
 	hw->phy.ops.release(hw);
 out:
@@ -1401,6 +1429,8 @@ out:
 }
 
 #endif /* ULP_SUPPORT */
+
+
 /**
  *  e1000_check_for_copper_link_ich8lan - Check for link (Copper)
  *  @hw: pointer to the HW structure
-- 
1.9.3

  parent reply	other threads:[~2016-11-24  1:32 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-23 17:22 [dpdk-dev] [PATCH 00/16] e1000 base code update Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 01/16] e1000/base: increased ULP timer Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 02/16] e1000/base: increase PHY PLL clock gate timing Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 03/16] e1000/base: try more times to get HW mailbox lock Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 04/16] e1000/base: add getting HW version support for i354 Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 05/16] e1000/base: expose e1000_write_vfta_i350 Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 06/16] e1000/base: add max RX jumbo frame define Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 07/16] e1000/base: restore link speed after ULP exit Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 08/16] e1000/base: clear ULP configuration register on " Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 09/16] e1000/base: increase LANPHYPC low duration Wenzhuo Lu
2016-11-23 17:22 ` Wenzhuo Lu [this message]
2016-11-23 17:22 ` [dpdk-dev] [PATCH 11/16] e1000/base: enable new i219 devices Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 12/16] e1000/base: always request clock during K1 at 1G link speed Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 13/16] e1000/base: ability to force K1-off disabled Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 14/16] e1000/base: support more i219 devices Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 15/16] e1000/base: update readme Wenzhuo Lu
2016-11-23 17:23 ` [dpdk-dev] [PATCH 16/16] e1000: add new i219 devices Wenzhuo Lu
2016-11-25 12:54 ` [dpdk-dev] [PATCH 00/16] e1000 base code update Ferruh Yigit
2016-11-28  1:15   ` Lu, Wenzhuo
2016-11-25 12:58 ` Ferruh Yigit
2016-11-28  1:16   ` Lu, Wenzhuo
2016-11-28 11:33   ` Thomas Monjalon
2016-11-29  0:30     ` Lu, Wenzhuo
2016-11-29  9:28       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1479921780-9813-11-git-send-email-wenzhuo.lu@intel.com \
    --to=wenzhuo.lu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).