From: Wenzhuo Lu <wenzhuo.lu@intel.com>
To: dev@dpdk.org
Cc: Wenzhuo Lu <wenzhuo.lu@intel.com>
Subject: [dpdk-dev] [PATCH 16/16] e1000: add new i219 devices
Date: Wed, 23 Nov 2016 12:23:00 -0500 [thread overview]
Message-ID: <1479921780-9813-17-git-send-email-wenzhuo.lu@intel.com> (raw)
In-Reply-To: <1479921780-9813-1-git-send-email-wenzhuo.lu@intel.com>
Enable the new i219 devices.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---
drivers/net/e1000/em_ethdev.c | 34 +++++++++++++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/net/e1000/em_ethdev.c b/drivers/net/e1000/em_ethdev.c
index aee3d34..6a4cf2b 100644
--- a/drivers/net/e1000/em_ethdev.c
+++ b/drivers/net/e1000/em_ethdev.c
@@ -168,6 +168,19 @@ static const struct rte_pci_id pci_id_em_map[] = {
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V2) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_LM3) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_I218_V3) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM2) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V2) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_LBG_I219_LM3) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM4) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V4) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_LM5) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_SPT_I219_V5) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_LM6) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_V6) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_LM7) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_PCH_CNP_I219_V7) },
{ .vendor_id = 0, /* sentinel */ },
};
@@ -278,6 +291,19 @@ eth_em_dev_is_ich8(struct e1000_hw *hw)
case E1000_DEV_ID_PCH_I218_LM2:
case E1000_DEV_ID_PCH_I218_V3:
case E1000_DEV_ID_PCH_I218_LM3:
+ case E1000_DEV_ID_PCH_SPT_I219_LM:
+ case E1000_DEV_ID_PCH_SPT_I219_V:
+ case E1000_DEV_ID_PCH_SPT_I219_LM2:
+ case E1000_DEV_ID_PCH_SPT_I219_V2:
+ case E1000_DEV_ID_PCH_LBG_I219_LM3:
+ case E1000_DEV_ID_PCH_SPT_I219_LM4:
+ case E1000_DEV_ID_PCH_SPT_I219_V4:
+ case E1000_DEV_ID_PCH_SPT_I219_LM5:
+ case E1000_DEV_ID_PCH_SPT_I219_V5:
+ case E1000_DEV_ID_PCH_CNP_I219_LM6:
+ case E1000_DEV_ID_PCH_CNP_I219_V6:
+ case E1000_DEV_ID_PCH_CNP_I219_LM7:
+ case E1000_DEV_ID_PCH_CNP_I219_V7:
return 1;
default:
return 0;
@@ -540,6 +566,8 @@ em_set_pba(struct e1000_hw *hw)
case e1000_pchlan:
case e1000_pch2lan:
case e1000_pch_lpt:
+ case e1000_pch_spt:
+ case e1000_pch_cnp:
pba = E1000_PBA_26K;
break;
default:
@@ -853,7 +881,9 @@ em_hardware_init(struct e1000_hw *hw)
hw->fc.low_water = 0x5048;
hw->fc.pause_time = 0x0650;
hw->fc.refresh_time = 0x0400;
- } else if (hw->mac.type == e1000_pch_lpt) {
+ } else if (hw->mac.type == e1000_pch_lpt ||
+ hw->mac.type == e1000_pch_spt ||
+ hw->mac.type == e1000_pch_cnp) {
hw->fc.requested_mode = e1000_fc_full;
}
@@ -1026,6 +1056,8 @@ em_get_max_pktlen(const struct e1000_hw *hw)
case e1000_ich10lan:
case e1000_pch2lan:
case e1000_pch_lpt:
+ case e1000_pch_spt:
+ case e1000_pch_cnp:
case e1000_82574:
case e1000_80003es2lan: /* 9K Jumbo Frame size */
case e1000_82583:
--
1.9.3
next prev parent reply other threads:[~2016-11-24 1:32 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-23 17:22 [dpdk-dev] [PATCH 00/16] e1000 base code update Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 01/16] e1000/base: increased ULP timer Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 02/16] e1000/base: increase PHY PLL clock gate timing Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 03/16] e1000/base: try more times to get HW mailbox lock Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 04/16] e1000/base: add getting HW version support for i354 Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 05/16] e1000/base: expose e1000_write_vfta_i350 Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 06/16] e1000/base: add max RX jumbo frame define Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 07/16] e1000/base: restore link speed after ULP exit Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 08/16] e1000/base: clear ULP configuration register on " Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 09/16] e1000/base: increase LANPHYPC low duration Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 10/16] e1000/base: workaround for ULP entry flow Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 11/16] e1000/base: enable new i219 devices Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 12/16] e1000/base: always request clock during K1 at 1G link speed Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 13/16] e1000/base: ability to force K1-off disabled Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 14/16] e1000/base: support more i219 devices Wenzhuo Lu
2016-11-23 17:22 ` [dpdk-dev] [PATCH 15/16] e1000/base: update readme Wenzhuo Lu
2016-11-23 17:23 ` Wenzhuo Lu [this message]
2016-11-25 12:54 ` [dpdk-dev] [PATCH 00/16] e1000 base code update Ferruh Yigit
2016-11-28 1:15 ` Lu, Wenzhuo
2016-11-25 12:58 ` Ferruh Yigit
2016-11-28 1:16 ` Lu, Wenzhuo
2016-11-28 11:33 ` Thomas Monjalon
2016-11-29 0:30 ` Lu, Wenzhuo
2016-11-29 9:28 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479921780-9813-17-git-send-email-wenzhuo.lu@intel.com \
--to=wenzhuo.lu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).