From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>
Subject: [dpdk-dev] [PATCH v2 11/55] net/sfc: import libefx SFN8xxx family support
Date: Tue, 29 Nov 2016 16:18:43 +0000 [thread overview]
Message-ID: <1480436367-20749-12-git-send-email-arybchenko@solarflare.com> (raw)
In-Reply-To: <1480436367-20749-1-git-send-email-arybchenko@solarflare.com>
SFN8xxx is the second family based on EF10 architecture.
It has few differences from SFN7xxx adapters family.
EFSYS_OPT_MEDFORD should be enabled to use it.
>From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
drivers/net/sfc/base/ef10_impl.h | 6 +-
drivers/net/sfc/base/efx_check.h | 2 +
drivers/net/sfc/base/efx_ev.c | 6 +
drivers/net/sfc/base/efx_filter.c | 6 +
drivers/net/sfc/base/efx_impl.h | 4 +
drivers/net/sfc/base/efx_intr.c | 6 +
drivers/net/sfc/base/efx_mac.c | 7 +
drivers/net/sfc/base/efx_mcdi.c | 6 +
drivers/net/sfc/base/efx_nic.c | 54 +++++
drivers/net/sfc/base/efx_phy.c | 5 +
drivers/net/sfc/base/efx_rx.c | 6 +
drivers/net/sfc/base/efx_tx.c | 29 +++
drivers/net/sfc/base/medford_impl.h | 67 ++++++
drivers/net/sfc/base/medford_nic.c | 398 ++++++++++++++++++++++++++++++++++++
14 files changed, 601 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/sfc/base/medford_impl.h
create mode 100644 drivers/net/sfc/base/medford_nic.c
diff --git a/drivers/net/sfc/base/ef10_impl.h b/drivers/net/sfc/base/ef10_impl.h
index b901ccc..697e99b 100644
--- a/drivers/net/sfc/base/ef10_impl.h
+++ b/drivers/net/sfc/base/ef10_impl.h
@@ -35,8 +35,12 @@
extern "C" {
#endif
-#if EFSYS_OPT_HUNTINGTON
+#if (EFSYS_OPT_HUNTINGTON && EFSYS_OPT_MEDFORD)
+#define EF10_MAX_PIOBUF_NBUFS MAX(HUNT_PIOBUF_NBUFS, MEDFORD_PIOBUF_NBUFS)
+#elif EFSYS_OPT_HUNTINGTON
#define EF10_MAX_PIOBUF_NBUFS HUNT_PIOBUF_NBUFS
+#elif EFSYS_OPT_MEDFORD
+#define EF10_MAX_PIOBUF_NBUFS MEDFORD_PIOBUF_NBUFS
#endif
/*
diff --git a/drivers/net/sfc/base/efx_check.h b/drivers/net/sfc/base/efx_check.h
index 63c809c..ef88645 100644
--- a/drivers/net/sfc/base/efx_check.h
+++ b/drivers/net/sfc/base/efx_check.h
@@ -209,7 +209,9 @@
#if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
/* Support adapters with missing static config (for factory use only) */
+# if !EFSYS_OPT_MEDFORD
# error "ALLOW_UNCONFIGURED_NIC requires MEDFORD"
+# endif
#endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
#endif /* _SYS_EFX_CHECK_H */
diff --git a/drivers/net/sfc/base/efx_ev.c b/drivers/net/sfc/base/efx_ev.c
index 65094c1..8cb78be 100644
--- a/drivers/net/sfc/base/efx_ev.c
+++ b/drivers/net/sfc/base/efx_ev.c
@@ -134,6 +134,12 @@ efx_ev_init(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ eevop = &__efx_ev_ef10_ops;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
EFSYS_ASSERT(0);
rc = ENOTSUP;
diff --git a/drivers/net/sfc/base/efx_filter.c b/drivers/net/sfc/base/efx_filter.c
index 47e2ae4..c878b78 100644
--- a/drivers/net/sfc/base/efx_filter.c
+++ b/drivers/net/sfc/base/efx_filter.c
@@ -165,6 +165,12 @@ efx_filter_init(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ efop = &__efx_filter_ef10_ops;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
EFSYS_ASSERT(0);
rc = ENOTSUP;
diff --git a/drivers/net/sfc/base/efx_impl.h b/drivers/net/sfc/base/efx_impl.h
index 10ab36b..97057e4 100644
--- a/drivers/net/sfc/base/efx_impl.h
+++ b/drivers/net/sfc/base/efx_impl.h
@@ -49,6 +49,10 @@
#include "hunt_impl.h"
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+#include "medford_impl.h"
+#endif /* EFSYS_OPT_MEDFORD */
+
#if (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD)
#include "ef10_impl.h"
#endif /* (EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD) */
diff --git a/drivers/net/sfc/base/efx_intr.c b/drivers/net/sfc/base/efx_intr.c
index 50cf388..f0422d5 100644
--- a/drivers/net/sfc/base/efx_intr.c
+++ b/drivers/net/sfc/base/efx_intr.c
@@ -150,6 +150,12 @@ efx_intr_init(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ eiop = &__efx_intr_ef10_ops;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
EFSYS_ASSERT(B_FALSE);
rc = ENOTSUP;
diff --git a/drivers/net/sfc/base/efx_mac.c b/drivers/net/sfc/base/efx_mac.c
index 1d50128..c10c79a 100644
--- a/drivers/net/sfc/base/efx_mac.c
+++ b/drivers/net/sfc/base/efx_mac.c
@@ -516,6 +516,13 @@ efx_mac_select(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ emop = &__efx_ef10_mac_ops;
+ type = EFX_MAC_MEDFORD;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
rc = EINVAL;
goto fail1;
diff --git a/drivers/net/sfc/base/efx_mcdi.c b/drivers/net/sfc/base/efx_mcdi.c
index 338ff49..8d91812 100644
--- a/drivers/net/sfc/base/efx_mcdi.c
+++ b/drivers/net/sfc/base/efx_mcdi.c
@@ -110,6 +110,12 @@ efx_mcdi_init(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ emcop = &__efx_mcdi_ef10_ops;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
EFSYS_ASSERT(0);
rc = ENOTSUP;
diff --git a/drivers/net/sfc/base/efx_nic.c b/drivers/net/sfc/base/efx_nic.c
index 701c6e3..3ce8514 100644
--- a/drivers/net/sfc/base/efx_nic.c
+++ b/drivers/net/sfc/base/efx_nic.c
@@ -74,6 +74,24 @@ efx_family(
return (0);
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_PCI_DEVID_MEDFORD_PF_UNINIT:
+ /*
+ * Hardware default for PF0 of uninitialised Medford.
+ * manftest must be able to cope with this device id.
+ */
+ *efp = EFX_FAMILY_MEDFORD;
+ return (0);
+
+ case EFX_PCI_DEVID_MEDFORD:
+ *efp = EFX_FAMILY_MEDFORD;
+ return (0);
+
+ case EFX_PCI_DEVID_MEDFORD_VF:
+ *efp = EFX_FAMILY_MEDFORD;
+ return (0);
+#endif /* EFSYS_OPT_MEDFORD */
+
case EFX_PCI_DEVID_FALCON: /* Obsolete, not supported */
default:
break;
@@ -188,6 +206,22 @@ static const efx_nic_ops_t __efx_nic_hunt_ops = {
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+
+static const efx_nic_ops_t __efx_nic_medford_ops = {
+ ef10_nic_probe, /* eno_probe */
+ medford_board_cfg, /* eno_board_cfg */
+ ef10_nic_set_drv_limits, /* eno_set_drv_limits */
+ ef10_nic_reset, /* eno_reset */
+ ef10_nic_init, /* eno_init */
+ ef10_nic_get_vi_pool, /* eno_get_vi_pool */
+ ef10_nic_get_bar_region, /* eno_get_bar_region */
+ ef10_nic_fini, /* eno_fini */
+ ef10_nic_unprobe, /* eno_unprobe */
+};
+
+#endif /* EFSYS_OPT_MEDFORD */
+
__checkReturn efx_rc_t
efx_nic_create(
@@ -246,6 +280,26 @@ efx_nic_create(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ enp->en_enop = &__efx_nic_medford_ops;
+ /*
+ * FW_ASSISTED_TSO omitted as Medford only supports firmware
+ * assisted TSO version 2, not the v1 scheme used on Huntington.
+ */
+ enp->en_features =
+ EFX_FEATURE_IPV6 |
+ EFX_FEATURE_LINK_EVENTS |
+ EFX_FEATURE_PERIODIC_MAC_STATS |
+ EFX_FEATURE_MCDI |
+ EFX_FEATURE_MAC_HEADER_FILTERS |
+ EFX_FEATURE_MCDI_DMA |
+ EFX_FEATURE_PIO_BUFFERS |
+ EFX_FEATURE_FW_ASSISTED_TSO_V2 |
+ EFX_FEATURE_PACKED_STREAM;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
rc = ENOTSUP;
goto fail2;
diff --git a/drivers/net/sfc/base/efx_phy.c b/drivers/net/sfc/base/efx_phy.c
index b663cf8..e7e915e 100644
--- a/drivers/net/sfc/base/efx_phy.c
+++ b/drivers/net/sfc/base/efx_phy.c
@@ -78,6 +78,11 @@ efx_phy_probe(
epop = &__efx_phy_ef10_ops;
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ epop = &__efx_phy_ef10_ops;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
default:
rc = ENOTSUP;
goto fail1;
diff --git a/drivers/net/sfc/base/efx_rx.c b/drivers/net/sfc/base/efx_rx.c
index 8ca5731..2899a0f 100644
--- a/drivers/net/sfc/base/efx_rx.c
+++ b/drivers/net/sfc/base/efx_rx.c
@@ -152,6 +152,12 @@ efx_rx_init(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ erxop = &__efx_rx_ef10_ops;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
EFSYS_ASSERT(0);
rc = ENOTSUP;
diff --git a/drivers/net/sfc/base/efx_tx.c b/drivers/net/sfc/base/efx_tx.c
index ed66695..16834af 100644
--- a/drivers/net/sfc/base/efx_tx.c
+++ b/drivers/net/sfc/base/efx_tx.c
@@ -152,6 +152,29 @@ static const efx_tx_ops_t __efx_tx_hunt_ops = {
};
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+static const efx_tx_ops_t __efx_tx_medford_ops = {
+ ef10_tx_init, /* etxo_init */
+ ef10_tx_fini, /* etxo_fini */
+ ef10_tx_qcreate, /* etxo_qcreate */
+ ef10_tx_qdestroy, /* etxo_qdestroy */
+ ef10_tx_qpost, /* etxo_qpost */
+ ef10_tx_qpush, /* etxo_qpush */
+ ef10_tx_qpace, /* etxo_qpace */
+ ef10_tx_qflush, /* etxo_qflush */
+ ef10_tx_qenable, /* etxo_qenable */
+ ef10_tx_qpio_enable, /* etxo_qpio_enable */
+ ef10_tx_qpio_disable, /* etxo_qpio_disable */
+ ef10_tx_qpio_write, /* etxo_qpio_write */
+ ef10_tx_qpio_post, /* etxo_qpio_post */
+ ef10_tx_qdesc_post, /* etxo_qdesc_post */
+ ef10_tx_qdesc_dma_create, /* etxo_qdesc_dma_create */
+ NULL, /* etxo_qdesc_tso_create */
+ ef10_tx_qdesc_tso2_create, /* etxo_qdesc_tso2_create */
+ ef10_tx_qdesc_vlantci_create, /* etxo_qdesc_vlantci_create */
+};
+#endif /* EFSYS_OPT_MEDFORD */
+
__checkReturn efx_rc_t
efx_tx_init(
__in efx_nic_t *enp)
@@ -185,6 +208,12 @@ efx_tx_init(
break;
#endif /* EFSYS_OPT_HUNTINGTON */
+#if EFSYS_OPT_MEDFORD
+ case EFX_FAMILY_MEDFORD:
+ etxop = &__efx_tx_medford_ops;
+ break;
+#endif /* EFSYS_OPT_MEDFORD */
+
default:
EFSYS_ASSERT(0);
rc = ENOTSUP;
diff --git a/drivers/net/sfc/base/medford_impl.h b/drivers/net/sfc/base/medford_impl.h
new file mode 100644
index 0000000..de2f5cf
--- /dev/null
+++ b/drivers/net/sfc/base/medford_impl.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 2015-2016 Solarflare Communications Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * The views and conclusions contained in the software and documentation are
+ * those of the authors and should not be interpreted as representing official
+ * policies, either expressed or implied, of the FreeBSD Project.
+ */
+
+#ifndef _SYS_MEDFORD_IMPL_H
+#define _SYS_MEDFORD_IMPL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Alignment requirement for value written to RX WPTR:
+ * the WPTR must be aligned to an 8 descriptor boundary
+ *
+ * FIXME: Is this the same on Medford as Huntington?
+ */
+#define MEDFORD_RX_WPTR_ALIGN 8
+
+
+
+#ifndef ER_EZ_TX_PIOBUF_SIZE
+#define ER_EZ_TX_PIOBUF_SIZE 4096
+#endif
+
+
+#define MEDFORD_PIOBUF_NBUFS (16)
+#define MEDFORD_PIOBUF_SIZE (ER_EZ_TX_PIOBUF_SIZE)
+
+#define MEDFORD_MIN_PIO_ALLOC_SIZE (MEDFORD_PIOBUF_SIZE / 32)
+
+
+extern __checkReturn efx_rc_t
+medford_board_cfg(
+ __in efx_nic_t *enp);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _SYS_MEDFORD_IMPL_H */
diff --git a/drivers/net/sfc/base/medford_nic.c b/drivers/net/sfc/base/medford_nic.c
new file mode 100644
index 0000000..6ad68c6
--- /dev/null
+++ b/drivers/net/sfc/base/medford_nic.c
@@ -0,0 +1,398 @@
+/*
+ * Copyright (c) 2015-2016 Solarflare Communications Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * The views and conclusions contained in the software and documentation are
+ * those of the authors and should not be interpreted as representing official
+ * policies, either expressed or implied, of the FreeBSD Project.
+ */
+
+#include "efx.h"
+#include "efx_impl.h"
+
+
+#if EFSYS_OPT_MEDFORD
+
+static __checkReturn efx_rc_t
+efx_mcdi_get_rxdp_config(
+ __in efx_nic_t *enp,
+ __out uint32_t *end_paddingp)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_GET_RXDP_CONFIG_IN_LEN,
+ MC_CMD_GET_RXDP_CONFIG_OUT_LEN)];
+ uint32_t end_padding;
+ efx_rc_t rc;
+
+ memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_GET_RXDP_CONFIG;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_GET_RXDP_CONFIG_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_GET_RXDP_CONFIG_OUT_LEN;
+
+ efx_mcdi_execute(enp, &req);
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (MCDI_OUT_DWORD_FIELD(req, GET_RXDP_CONFIG_OUT_DATA,
+ GET_RXDP_CONFIG_OUT_PAD_HOST_DMA) == 0) {
+ /* RX DMA end padding is disabled */
+ end_padding = 0;
+ } else {
+ switch (MCDI_OUT_DWORD_FIELD(req, GET_RXDP_CONFIG_OUT_DATA,
+ GET_RXDP_CONFIG_OUT_PAD_HOST_LEN)) {
+ case MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_64:
+ end_padding = 64;
+ break;
+ case MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_128:
+ end_padding = 128;
+ break;
+ case MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_256:
+ end_padding = 256;
+ break;
+ default:
+ rc = ENOTSUP;
+ goto fail2;
+ }
+ }
+
+ *end_paddingp = end_padding;
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static __checkReturn efx_rc_t
+medford_nic_get_required_pcie_bandwidth(
+ __in efx_nic_t *enp,
+ __out uint32_t *bandwidth_mbpsp)
+{
+ uint32_t port_modes;
+ uint32_t current_mode;
+ uint32_t bandwidth;
+ efx_rc_t rc;
+
+ if ((rc = efx_mcdi_get_port_modes(enp, &port_modes,
+ ¤t_mode)) != 0) {
+ /* No port mode info available. */
+ bandwidth = 0;
+ goto out;
+ }
+
+ if ((rc = ef10_nic_get_port_mode_bandwidth(current_mode,
+ &bandwidth)) != 0)
+ goto fail1;
+
+out:
+ *bandwidth_mbpsp = bandwidth;
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+medford_board_cfg(
+ __in efx_nic_t *enp)
+{
+ efx_mcdi_iface_t *emip = &(enp->en_mcdi.em_emip);
+ efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
+ uint8_t mac_addr[6] = { 0 };
+ uint32_t board_type = 0;
+ ef10_link_state_t els;
+ efx_port_t *epp = &(enp->en_port);
+ uint32_t port;
+ uint32_t pf;
+ uint32_t vf;
+ uint32_t mask;
+ uint32_t sysclk, dpcpu_clk;
+ uint32_t base, nvec;
+ uint32_t end_padding;
+ uint32_t bandwidth;
+ efx_rc_t rc;
+
+ /*
+ * FIXME: Likely to be incomplete and incorrect.
+ * Parts of this should be shared with Huntington.
+ */
+
+ if ((rc = efx_mcdi_get_port_assignment(enp, &port)) != 0)
+ goto fail1;
+
+ /*
+ * NOTE: The MCDI protocol numbers ports from zero.
+ * The common code MCDI interface numbers ports from one.
+ */
+ emip->emi_port = port + 1;
+
+ if ((rc = ef10_external_port_mapping(enp, port,
+ &encp->enc_external_port)) != 0)
+ goto fail2;
+
+ /*
+ * Get PCIe function number from firmware (used for
+ * per-function privilege and dynamic config info).
+ * - PCIe PF: pf = PF number, vf = 0xffff.
+ * - PCIe VF: pf = parent PF, vf = VF number.
+ */
+ if ((rc = efx_mcdi_get_function_info(enp, &pf, &vf)) != 0)
+ goto fail3;
+
+ encp->enc_pf = pf;
+ encp->enc_vf = vf;
+
+ /* MAC address for this function */
+ if (EFX_PCI_FUNCTION_IS_PF(encp)) {
+ rc = efx_mcdi_get_mac_address_pf(enp, mac_addr);
+#if EFSYS_OPT_ALLOW_UNCONFIGURED_NIC
+ /* Disable static config checking for Medford NICs, ONLY
+ * for manufacturing test and setup at the factory, to
+ * allow the static config to be installed.
+ */
+#else /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
+ if ((rc == 0) && (mac_addr[0] & 0x02)) {
+ /*
+ * If the static config does not include a global MAC
+ * address pool then the board may return a locally
+ * administered MAC address (this should only happen on
+ * incorrectly programmed boards).
+ */
+ rc = EINVAL;
+ }
+#endif /* EFSYS_OPT_ALLOW_UNCONFIGURED_NIC */
+ } else {
+ rc = efx_mcdi_get_mac_address_vf(enp, mac_addr);
+ }
+ if (rc != 0)
+ goto fail4;
+
+ EFX_MAC_ADDR_COPY(encp->enc_mac_addr, mac_addr);
+
+ /* Board configuration */
+ rc = efx_mcdi_get_board_cfg(enp, &board_type, NULL, NULL);
+ if (rc != 0) {
+ /* Unprivileged functions may not be able to read board cfg */
+ if (rc == EACCES)
+ board_type = 0;
+ else
+ goto fail5;
+ }
+
+ encp->enc_board_type = board_type;
+ encp->enc_clk_mult = 1; /* not used for Medford */
+
+ /* Fill out fields in enp->en_port and enp->en_nic_cfg from MCDI */
+ if ((rc = efx_mcdi_get_phy_cfg(enp)) != 0)
+ goto fail6;
+
+ /* Obtain the default PHY advertised capabilities */
+ if ((rc = ef10_phy_get_link(enp, &els)) != 0)
+ goto fail7;
+ epp->ep_default_adv_cap_mask = els.els_adv_cap_mask;
+ epp->ep_adv_cap_mask = els.els_adv_cap_mask;
+
+ /*
+ * Enable firmware workarounds for hardware errata.
+ * Expected responses are:
+ * - 0 (zero):
+ * Success: workaround enabled or disabled as requested.
+ * - MC_CMD_ERR_ENOSYS (reported as ENOTSUP):
+ * Firmware does not support the MC_CMD_WORKAROUND request.
+ * (assume that the workaround is not supported).
+ * - MC_CMD_ERR_ENOENT (reported as ENOENT):
+ * Firmware does not support the requested workaround.
+ * - MC_CMD_ERR_EPERM (reported as EACCES):
+ * Unprivileged function cannot enable/disable workarounds.
+ *
+ * See efx_mcdi_request_errcode() for MCDI error translations.
+ */
+
+
+ if (EFX_PCI_FUNCTION_IS_VF(encp)) {
+ /*
+ * Interrupt testing does not work for VFs. See bug50084.
+ * FIXME: Does this still apply to Medford?
+ */
+ encp->enc_bug41750_workaround = B_TRUE;
+ }
+
+ /* Chained multicast is always enabled on Medford */
+ encp->enc_bug26807_workaround = B_TRUE;
+
+ /*
+ * If the bug61265 workaround is enabled, then interrupt holdoff timers
+ * cannot be controlled by timer table writes, so MCDI must be used
+ * (timer table writes can still be used for wakeup timers).
+ */
+ rc = efx_mcdi_set_workaround(enp, MC_CMD_WORKAROUND_BUG61265, B_TRUE,
+ NULL);
+ if ((rc == 0) || (rc == EACCES))
+ encp->enc_bug61265_workaround = B_TRUE;
+ else if ((rc == ENOTSUP) || (rc == ENOENT))
+ encp->enc_bug61265_workaround = B_FALSE;
+ else
+ goto fail8;
+
+ /* Get clock frequencies (in MHz). */
+ if ((rc = efx_mcdi_get_clock(enp, &sysclk, &dpcpu_clk)) != 0)
+ goto fail9;
+
+ /*
+ * The Medford timer quantum is 1536 dpcpu_clk cycles, documented for
+ * the EV_TMR_VAL field of EV_TIMER_TBL. Scale for MHz and ns units.
+ */
+ encp->enc_evq_timer_quantum_ns = 1536000UL / dpcpu_clk; /* 1536 cycles */
+ encp->enc_evq_timer_max_us = (encp->enc_evq_timer_quantum_ns <<
+ FRF_CZ_TC_TIMER_VAL_WIDTH) / 1000;
+
+ /* Check capabilities of running datapath firmware */
+ if ((rc = ef10_get_datapath_caps(enp)) != 0)
+ goto fail10;
+
+ /* Alignment for receive packet DMA buffers */
+ encp->enc_rx_buf_align_start = 1;
+
+ /* Get the RX DMA end padding alignment configuration */
+ if ((rc = efx_mcdi_get_rxdp_config(enp, &end_padding)) != 0) {
+ if (rc != EACCES)
+ goto fail11;
+
+ /* Assume largest tail padding size supported by hardware */
+ end_padding = 256;
+ }
+ encp->enc_rx_buf_align_end = end_padding;
+
+ /* Alignment for WPTR updates */
+ encp->enc_rx_push_align = EF10_RX_WPTR_ALIGN;
+
+ /*
+ * Set resource limits for MC_CMD_ALLOC_VIS. Note that we cannot use
+ * MC_CMD_GET_RESOURCE_LIMITS here as that reports the available
+ * resources (allocated to this PCIe function), which is zero until
+ * after we have allocated VIs.
+ */
+ encp->enc_evq_limit = 1024;
+ encp->enc_rxq_limit = EFX_RXQ_LIMIT_TARGET;
+ encp->enc_txq_limit = EFX_TXQ_LIMIT_TARGET;
+
+ /*
+ * The maximum supported transmit queue size is 2048. TXQs with 4096
+ * descriptors are not supported as the top bit is used for vfifo
+ * stuffing.
+ */
+ encp->enc_txq_max_ndescs = 2048;
+
+ encp->enc_buftbl_limit = 0xFFFFFFFF;
+
+ encp->enc_piobuf_limit = MEDFORD_PIOBUF_NBUFS;
+ encp->enc_piobuf_size = MEDFORD_PIOBUF_SIZE;
+ encp->enc_piobuf_min_alloc_size = MEDFORD_MIN_PIO_ALLOC_SIZE;
+
+ /*
+ * Get the current privilege mask. Note that this may be modified
+ * dynamically, so this value is informational only. DO NOT use
+ * the privilege mask to check for sufficient privileges, as that
+ * can result in time-of-check/time-of-use bugs.
+ */
+ if ((rc = ef10_get_privilege_mask(enp, &mask)) != 0)
+ goto fail12;
+ encp->enc_privilege_mask = mask;
+
+ /* Get interrupt vector limits */
+ if ((rc = efx_mcdi_get_vector_cfg(enp, &base, &nvec, NULL)) != 0) {
+ if (EFX_PCI_FUNCTION_IS_PF(encp))
+ goto fail13;
+
+ /* Ignore error (cannot query vector limits from a VF). */
+ base = 0;
+ nvec = 1024;
+ }
+ encp->enc_intr_vec_base = base;
+ encp->enc_intr_limit = nvec;
+
+ /*
+ * Maximum number of bytes into the frame the TCP header can start for
+ * firmware assisted TSO to work.
+ */
+ encp->enc_tx_tso_tcp_header_offset_limit = EF10_TCP_HEADER_OFFSET_LIMIT;
+
+ /*
+ * Medford stores a single global copy of VPD, not per-PF as on
+ * Huntington.
+ */
+ encp->enc_vpd_is_global = B_TRUE;
+
+ rc = medford_nic_get_required_pcie_bandwidth(enp, &bandwidth);
+ if (rc != 0)
+ goto fail14;
+ encp->enc_required_pcie_bandwidth_mbps = bandwidth;
+ encp->enc_max_pcie_link_gen = EFX_PCIE_LINK_SPEED_GEN3;
+
+ return (0);
+
+fail14:
+ EFSYS_PROBE(fail14);
+fail13:
+ EFSYS_PROBE(fail13);
+fail12:
+ EFSYS_PROBE(fail12);
+fail11:
+ EFSYS_PROBE(fail11);
+fail10:
+ EFSYS_PROBE(fail10);
+fail9:
+ EFSYS_PROBE(fail9);
+fail8:
+ EFSYS_PROBE(fail8);
+fail7:
+ EFSYS_PROBE(fail7);
+fail6:
+ EFSYS_PROBE(fail6);
+fail5:
+ EFSYS_PROBE(fail5);
+fail4:
+ EFSYS_PROBE(fail4);
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+#endif /* EFSYS_OPT_MEDFORD */
--
2.5.5
next prev parent reply other threads:[~2016-11-29 16:20 UTC|newest]
Thread overview: 149+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 15:00 [dpdk-dev] [PATCH 00/56] Solarflare libefx-based PMD Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 01/56] net/sfc: libefx-based PMD stub sufficient to build and init Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 15:59 ` Andrew Rybchenko
2016-11-25 10:17 ` Ferruh Yigit
2016-11-25 14:22 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 02/56] net/sfc: import libefx base Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 03/56] net/sfc: import libefx register definitions Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 04/56] net/sfc: import libefx filters support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 05/56] net/sfc: import libefx MCDI definition Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 06/56] net/sfc: import libefx MCDI implementation Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 07/56] net/sfc: import libefx MCDI logging support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 08/56] net/sfc: import libefx MCDI proxy authorization support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 09/56] net/sfc: import libefx 5xxx/6xxx family support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 10/56] net/sfc: import libefx SFN7xxx " Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 11/56] net/sfc: import libefx SFN8xxx " Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 12/56] net/sfc: import libefx diagnostics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 13/56] net/sfc: import libefx built-in selftest support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 14/56] net/sfc: import libefx software per-queue statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 15/56] net/sfc: import libefx PHY flags control support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 16/56] net/sfc: import libefx PHY statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 17/56] net/sfc: import libefx PHY LEDs control support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 18/56] net/sfc: import libefx MAC statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 19/56] net/sfc: import libefx event prefetch support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 20/56] net/sfc: import libefx Rx scatter support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 21/56] net/sfc: import libefx RSS support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 22/56] net/sfc: import libefx loopback control support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 23/56] net/sfc: import libefx monitors statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 24/56] net/sfc: import libefx support to access monitors via MCDI Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 25/56] net/sfc: import libefx support for Rx packed stream mode Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 26/56] net/sfc: import libefx NVRAM support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 27/56] net/sfc: import libefx VPD support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 28/56] net/sfc: import libefx bootrom configuration support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 29/56] net/sfc: import libefx licensing support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 30/56] net/sfc: include libefx in build Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 15:44 ` Andrew Rybchenko
2016-11-25 10:24 ` Ferruh Yigit
2016-11-25 15:05 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 31/56] net/sfc: implement dummy callback to get device information Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 15:05 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 32/56] net/sfc: implement driver operation to init device on attach Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 14:58 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 33/56] net/sfc: add device configure and close stubs Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 14:46 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 34/56] net/sfc: add device configuration checks Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 35/56] net/sfc: implement device start and stop operations Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 36/56] net/sfc: make available resources estimation and allocation Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 37/56] net/sfc: interrupts support sufficient for event queue init Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 38/56] net/sfc: implement event queue support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 39/56] net/sfc: implement EVQ dummy exception handling Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 40/56] net/sfc: maintain management event queue Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 41/56] net/sfc: periodic management EVQ polling using alarm Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 42/56] net/sfc: minimum port control sufficient to receive traffic Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 43/56] net/sfc: implement device operation to retrieve link info Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 44/56] net/sfc: implement Rx subsystem stubs Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 45/56] net/sfc: check configured rxmode Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 46/56] net/sfc: implement Rx queue setup release operations Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 47/56] net/sfc: calculate Rx buffer size which may be used Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 48/56] net/sfc: validate Rx queue buffers setup Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 49/56] net/sfc: implement Rx queue start and stop operations Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 50/56] net/sfc: implement device callback to Rx burst of packets Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 51/56] net/sfc: discard scattered packet on Rx correctly Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 52/56] net/sfc: provide basic stubs for Tx subsystem Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 53/56] net/sfc: add function to check configured Tx mode Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 54/56] net/sfc: add callbacks to set up and release Tx queues Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 55/56] net/sfc: implement transmit path start / stop Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 56/56] net/sfc: add callback to send bursts of packets Andrew Rybchenko
2016-11-23 0:02 ` [dpdk-dev] [PATCH 00/56] Solarflare libefx-based PMD Ferruh Yigit
2016-11-23 0:10 ` Ferruh Yigit
2016-11-23 7:49 ` Andrew Rybchenko
2016-11-23 9:57 ` Mcnamara, John
2016-11-23 13:34 ` Thomas Monjalon
2016-11-23 19:21 ` Stephen Hemminger
2016-11-24 10:59 ` Andrew Rybchenko
2016-11-25 10:24 ` Ferruh Yigit
2016-11-25 12:02 ` Andrew Rybchenko
2016-11-25 12:43 ` Ferruh Yigit
2016-11-25 13:00 ` Thomas Monjalon
2016-11-25 13:23 ` Andrew Rybchenko
2016-11-25 12:44 ` Andrew Rybchenko
2016-11-23 15:29 ` Ferruh Yigit
2016-11-24 16:15 ` Andrew Rybchenko
2016-11-25 10:25 ` Ferruh Yigit
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 00/55] " Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 01/55] net/sfc: libefx-based PMD stub sufficient to build and init Andrew Rybchenko
2016-12-02 14:54 ` Ferruh Yigit
2016-12-02 15:03 ` Andrew Rybchenko
2016-12-02 15:08 ` Ferruh Yigit
2016-12-02 15:11 ` Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 02/55] net/sfc: import libefx base Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 03/55] net/sfc: import libefx register definitions Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 04/55] net/sfc: import libefx filters support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 05/55] net/sfc: import libefx MCDI definition Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 06/55] net/sfc: import libefx MCDI implementation Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 07/55] net/sfc: import libefx MCDI logging support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 08/55] net/sfc: import libefx MCDI proxy authorization support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 09/55] net/sfc: import libefx 5xxx/6xxx family support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 10/55] net/sfc: import libefx SFN7xxx " Andrew Rybchenko
2016-11-29 16:18 ` Andrew Rybchenko [this message]
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 12/55] net/sfc: import libefx diagnostics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 13/55] net/sfc: import libefx built-in selftest support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 14/55] net/sfc: import libefx software per-queue statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 15/55] net/sfc: import libefx PHY flags control support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 16/55] net/sfc: import libefx PHY statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 17/55] net/sfc: import libefx PHY LEDs control support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 18/55] net/sfc: import libefx MAC statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 19/55] net/sfc: import libefx event prefetch support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 20/55] net/sfc: import libefx Rx scatter support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 21/55] net/sfc: import libefx RSS support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 22/55] net/sfc: import libefx loopback control support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 23/55] net/sfc: import libefx monitors statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 24/55] net/sfc: import libefx support to access monitors via MCDI Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 25/55] net/sfc: import libefx support for Rx packed stream mode Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 26/55] net/sfc: import libefx NVRAM support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 27/55] net/sfc: import libefx VPD support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 28/55] net/sfc: import libefx bootrom configuration support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 29/55] net/sfc: import libefx licensing support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 30/55] net/sfc: include libefx in build Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 31/55] net/sfc: implement driver operation to init device on attach Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 32/55] net/sfc: add device configure and close stubs Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 33/55] net/sfc: add device configuration checks Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 34/55] net/sfc: implement device start and stop operations Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 35/55] net/sfc: make available resources estimation and allocation Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 36/55] net/sfc: interrupts support sufficient for event queue init Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 37/55] net/sfc: implement event queue support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 38/55] net/sfc: implement EVQ dummy exception handling Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 39/55] net/sfc: maintain management event queue Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 40/55] net/sfc: periodic management EVQ polling using alarm Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 41/55] net/sfc: minimum port control sufficient to receive traffic Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 42/55] net/sfc: implement device operation to retrieve link info Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 43/55] net/sfc: implement Rx subsystem stubs Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 44/55] net/sfc: check configured rxmode Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 45/55] net/sfc: implement Rx queue setup release operations Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 46/55] net/sfc: calculate Rx buffer size which may be used Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 47/55] net/sfc: validate Rx queue buffers setup Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 48/55] net/sfc: implement Rx queue start and stop operations Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 49/55] net/sfc: implement device callback to Rx burst of packets Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 50/55] net/sfc: discard scattered packet on Rx correctly Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 51/55] net/sfc: provide basic stubs for Tx subsystem Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 52/55] net/sfc: add function to check configured Tx mode Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 53/55] net/sfc: add callbacks to set up and release Tx queues Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 54/55] net/sfc: implement transmit path start / stop Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 55/55] net/sfc: add callback to send bursts of packets Andrew Rybchenko
2016-12-02 14:55 ` [dpdk-dev] [PATCH v2 00/55] Solarflare libefx-based PMD Ferruh Yigit
2016-12-05 13:38 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480436367-20749-12-git-send-email-arybchenko@solarflare.com \
--to=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).