From: Tomasz Kulasek <tomaszx.kulasek@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v13 3/7] fm10k: add Tx preparation
Date: Tue, 13 Dec 2016 18:41:50 +0100 [thread overview]
Message-ID: <1481650914-40324-4-git-send-email-tomaszx.kulasek@intel.com> (raw)
In-Reply-To: <1481650914-40324-1-git-send-email-tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
drivers/net/fm10k/fm10k.h | 6 +++++
drivers/net/fm10k/fm10k_ethdev.c | 5 ++++
drivers/net/fm10k/fm10k_rxtx.c | 50 +++++++++++++++++++++++++++++++++++++-
3 files changed, 60 insertions(+), 1 deletion(-)
diff --git a/drivers/net/fm10k/fm10k.h b/drivers/net/fm10k/fm10k.h
index 05aa1a2..c6fed21 100644
--- a/drivers/net/fm10k/fm10k.h
+++ b/drivers/net/fm10k/fm10k.h
@@ -69,6 +69,9 @@
#define FM10K_MAX_RX_DESC (FM10K_MAX_RX_RING_SZ / sizeof(union fm10k_rx_desc))
#define FM10K_MAX_TX_DESC (FM10K_MAX_TX_RING_SZ / sizeof(struct fm10k_tx_desc))
+#define FM10K_TX_MAX_SEG UINT8_MAX
+#define FM10K_TX_MAX_MTU_SEG UINT8_MAX
+
/*
* byte aligment for HW RX data buffer
* Datasheet requires RX buffer addresses shall either be 512-byte aligned or
@@ -356,6 +359,9 @@ uint16_t fm10k_recv_scattered_pkts(void *rx_queue,
uint16_t fm10k_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
uint16_t nb_pkts);
+uint16_t fm10k_prep_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+
int fm10k_rxq_vec_setup(struct fm10k_rx_queue *rxq);
int fm10k_rx_vec_condition_check(struct rte_eth_dev *);
void fm10k_rx_queue_release_mbufs_vec(struct fm10k_rx_queue *rxq);
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index 923690c..a116822 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -1447,6 +1447,8 @@ static int fm10k_xstats_get_names(__rte_unused struct rte_eth_dev *dev,
.nb_max = FM10K_MAX_TX_DESC,
.nb_min = FM10K_MIN_TX_DESC,
.nb_align = FM10K_MULT_TX_DESC,
+ .nb_seg_max = FM10K_TX_MAX_SEG,
+ .nb_mtu_seg_max = FM10K_TX_MAX_MTU_SEG,
};
dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_2_5G |
@@ -2755,8 +2757,10 @@ static void __attribute__((cold))
fm10k_txq_vec_setup(txq);
}
dev->tx_pkt_burst = fm10k_xmit_pkts_vec;
+ dev->tx_pkt_prepare = NULL;
} else {
dev->tx_pkt_burst = fm10k_xmit_pkts;
+ dev->tx_pkt_prepare = fm10k_prep_pkts;
PMD_INIT_LOG(DEBUG, "Use regular Tx func");
}
}
@@ -2835,6 +2839,7 @@ static void __attribute__((cold))
dev->dev_ops = &fm10k_eth_dev_ops;
dev->rx_pkt_burst = &fm10k_recv_pkts;
dev->tx_pkt_burst = &fm10k_xmit_pkts;
+ dev->tx_pkt_prepare = &fm10k_prep_pkts;
/* only initialize in the primary process */
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
diff --git a/drivers/net/fm10k/fm10k_rxtx.c b/drivers/net/fm10k/fm10k_rxtx.c
index 32cc7ff..144e5e6 100644
--- a/drivers/net/fm10k/fm10k_rxtx.c
+++ b/drivers/net/fm10k/fm10k_rxtx.c
@@ -1,7 +1,7 @@
/*-
* BSD LICENSE
*
- * Copyright(c) 2013-2015 Intel Corporation. All rights reserved.
+ * Copyright(c) 2013-2016 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -35,6 +35,7 @@
#include <rte_ethdev.h>
#include <rte_common.h>
+#include <rte_net.h>
#include "fm10k.h"
#include "base/fm10k_type.h"
@@ -65,6 +66,15 @@ static inline void dump_rxd(union fm10k_rx_desc *rxd)
}
#endif
+#define FM10K_TX_OFFLOAD_MASK ( \
+ PKT_TX_VLAN_PKT | \
+ PKT_TX_IP_CKSUM | \
+ PKT_TX_L4_MASK | \
+ PKT_TX_TCP_SEG)
+
+#define FM10K_TX_OFFLOAD_NOTSUP_MASK \
+ (PKT_TX_OFFLOAD_MASK ^ FM10K_TX_OFFLOAD_MASK)
+
/* @note: When this function is changed, make corresponding change to
* fm10k_dev_supported_ptypes_get()
*/
@@ -597,3 +607,41 @@ static inline void tx_xmit_pkt(struct fm10k_tx_queue *q, struct rte_mbuf *mb)
return count;
}
+
+uint16_t
+fm10k_prep_pkts(__rte_unused void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts)
+{
+ int i, ret;
+ struct rte_mbuf *m;
+
+ for (i = 0; i < nb_pkts; i++) {
+ m = tx_pkts[i];
+
+ if ((m->ol_flags & PKT_TX_TCP_SEG) &&
+ (m->tso_segsz < FM10K_TSO_MINMSS)) {
+ rte_errno = -EINVAL;
+ return i;
+ }
+
+ if (m->ol_flags & FM10K_TX_OFFLOAD_NOTSUP_MASK) {
+ rte_errno = -ENOTSUP;
+ return i;
+ }
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ ret = rte_validate_tx_offload(m);
+ if (ret != 0) {
+ rte_errno = ret;
+ return i;
+ }
+#endif
+ ret = rte_net_intel_cksum_prepare(m);
+ if (ret != 0) {
+ rte_errno = ret;
+ return i;
+ }
+ }
+
+ return i;
+}
--
1.7.9.5
next prev parent reply other threads:[~2016-12-13 17:45 UTC|newest]
Thread overview: 260+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-26 16:22 [dpdk-dev] [PATCH 0/6] " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 1/6] ethdev: " Tomasz Kulasek
2016-09-08 7:28 ` Jerin Jacob
2016-09-08 16:09 ` Kulasek, TomaszX
2016-09-09 5:58 ` Jerin Jacob
2016-08-26 16:22 ` [dpdk-dev] [PATCH 2/6] e1000: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 3/6] fm10k: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 4/6] i40e: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 5/6] ixgbe: " Tomasz Kulasek
2016-08-26 16:22 ` [dpdk-dev] [PATCH 6/6] testpmd: add txprep engine Tomasz Kulasek
2016-08-26 17:31 ` [dpdk-dev] [PATCH 0/6] add Tx preparation Stephen Hemminger
2016-08-31 12:34 ` Ananyev, Konstantin
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 1/6] ethdev: " Tomasz Kulasek
2016-09-19 13:03 ` Ananyev, Konstantin
2016-09-19 15:29 ` Kulasek, TomaszX
2016-09-19 16:06 ` Jerin Jacob
2016-09-20 9:06 ` Ananyev, Konstantin
2016-09-21 8:29 ` Jerin Jacob
2016-09-22 9:36 ` Ananyev, Konstantin
2016-09-22 9:59 ` Jerin Jacob
2016-09-23 9:41 ` Ananyev, Konstantin
2016-09-23 10:29 ` Jerin Jacob
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 2/6] e1000: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 3/6] fm10k: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 4/6] i40e: " Tomasz Kulasek
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 5/6] ixgbe: " Tomasz Kulasek
2016-09-19 12:54 ` Ananyev, Konstantin
2016-09-19 13:58 ` Kulasek, TomaszX
2016-09-19 15:23 ` Ananyev, Konstantin
2016-09-20 7:15 ` Ananyev, Konstantin
2016-09-12 14:44 ` [dpdk-dev] [PATCH v2 6/6] testpmd: add txprep engine Tomasz Kulasek
2016-09-19 12:59 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 0/6] add Tx preparation Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 1/6] ethdev: " Tomasz Kulasek
2016-09-29 10:40 ` Ananyev, Konstantin
2016-09-29 13:04 ` Kulasek, TomaszX
2016-09-29 13:57 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 2/6] e1000: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 3/6] fm10k: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 4/6] i40e: " Tomasz Kulasek
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 5/6] ixgbe: " Tomasz Kulasek
2016-09-29 11:09 ` Ananyev, Konstantin
2016-09-29 15:12 ` Kulasek, TomaszX
2016-09-29 17:01 ` Ananyev, Konstantin
2016-09-28 11:10 ` [dpdk-dev] [PATCH v3 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 0/6] add Tx preparation Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 1/6] ethdev: " Tomasz Kulasek
2016-10-10 14:08 ` Thomas Monjalon
2016-10-13 7:08 ` Thomas Monjalon
2016-10-13 10:47 ` Kulasek, TomaszX
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 2/6] e1000: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 3/6] fm10k: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 4/6] i40e: " Tomasz Kulasek
2016-10-10 14:02 ` Wu, Jingjing
2016-10-10 17:20 ` Kulasek, TomaszX
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 5/6] ixgbe: " Tomasz Kulasek
2016-09-30 9:00 ` [dpdk-dev] [PATCH v4 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-09-30 9:55 ` [dpdk-dev] [PATCH v4 0/6] add Tx preparation Ananyev, Konstantin
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 " Tomasz Kulasek
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 1/6] ethdev: " Tomasz Kulasek
2016-10-13 19:21 ` Thomas Monjalon
2016-10-14 14:02 ` Kulasek, TomaszX
2016-10-14 14:20 ` Thomas Monjalon
2016-10-17 16:25 ` Kulasek, TomaszX
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 2/6] e1000: " Tomasz Kulasek
2016-10-13 17:36 ` [dpdk-dev] [PATCH v5 3/6] fm10k: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 4/6] i40e: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 5/6] ixgbe: " Tomasz Kulasek
2016-10-13 17:37 ` [dpdk-dev] [PATCH v5 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 0/6] add Tx preparation Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 1/6] ethdev: " Tomasz Kulasek
2016-10-18 14:57 ` Olivier Matz
2016-10-19 15:42 ` Kulasek, TomaszX
2016-10-19 22:07 ` Ananyev, Konstantin
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 2/6] e1000: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 3/6] fm10k: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 4/6] i40e: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 5/6] ixgbe: " Tomasz Kulasek
2016-10-14 15:05 ` [dpdk-dev] [PATCH v6 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-18 12:28 ` [dpdk-dev] [PATCH v6 0/6] add Tx preparation Ananyev, Konstantin
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 1/6] ethdev: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 2/6] e1000: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 3/6] fm10k: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 4/6] i40e: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 5/6] ixgbe: " Tomasz Kulasek
2016-10-21 13:42 ` [dpdk-dev] [PATCH v7 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 0/6] add Tx preparation Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 1/6] ethdev: " Tomasz Kulasek
2016-10-24 12:14 ` Ananyev, Konstantin
2016-10-24 12:49 ` Kulasek, TomaszX
2016-10-24 12:56 ` Ananyev, Konstantin
2016-10-24 14:12 ` Kulasek, TomaszX
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 2/6] e1000: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 3/6] fm10k: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 4/6] i40e: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 5/6] ixgbe: " Tomasz Kulasek
2016-10-21 14:46 ` [dpdk-dev] [PATCH v8 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 0/6] add Tx preparation Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 1/6] ethdev: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 2/6] e1000: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 3/6] fm10k: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 4/6] i40e: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 5/6] ixgbe: " Tomasz Kulasek
2016-10-24 14:05 ` [dpdk-dev] [PATCH v9 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 0/6] add Tx preparation Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 1/6] ethdev: " Tomasz Kulasek
2016-10-25 14:41 ` Olivier Matz
2016-10-25 17:28 ` Kulasek, TomaszX
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 2/6] e1000: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 3/6] fm10k: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 4/6] i40e: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 5/6] ixgbe: " Tomasz Kulasek
2016-10-24 16:51 ` [dpdk-dev] [PATCH v10 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-10-24 17:26 ` [dpdk-dev] [PATCH v10 0/6] add Tx preparation Ananyev, Konstantin
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 1/6] ethdev: " Tomasz Kulasek
2016-10-27 12:38 ` Olivier Matz
2016-10-27 15:01 ` Thomas Monjalon
2016-10-27 15:52 ` Ananyev, Konstantin
2016-10-27 16:02 ` Thomas Monjalon
2016-10-27 16:24 ` Ananyev, Konstantin
2016-10-27 16:39 ` Thomas Monjalon
2016-10-28 11:29 ` Ananyev, Konstantin
2016-10-28 11:34 ` Ananyev, Konstantin
2016-10-28 12:23 ` Thomas Monjalon
2016-10-28 12:59 ` Ananyev, Konstantin
2016-10-28 13:42 ` Thomas Monjalon
2016-11-01 12:57 ` Ananyev, Konstantin
2016-11-04 11:35 ` Thomas Monjalon
2016-10-27 16:39 ` Kulasek, TomaszX
2016-10-28 10:15 ` Ananyev, Konstantin
2016-10-28 10:22 ` Kulasek, TomaszX
2016-10-28 10:22 ` Thomas Monjalon
2016-10-28 10:28 ` Ananyev, Konstantin
2016-10-28 11:02 ` Richardson, Bruce
2016-10-28 11:14 ` Jerin Jacob
2016-10-27 16:29 ` Kulasek, TomaszX
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 2/6] e1000: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 3/6] fm10k: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 4/6] i40e: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 5/6] ixgbe: " Tomasz Kulasek
2016-10-26 12:56 ` [dpdk-dev] [PATCH v11 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 0/6] add Tx preparation Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 1/6] ethdev: " Tomasz Kulasek
2016-11-28 10:54 ` Thomas Monjalon
2016-12-01 16:24 ` Thomas Monjalon
2016-12-01 19:20 ` Kulasek, TomaszX
2016-12-01 19:52 ` Thomas Monjalon
2016-12-01 21:56 ` Jerin Jacob
2016-12-01 22:31 ` Kulasek, TomaszX
2016-12-01 23:50 ` Thomas Monjalon
2016-12-09 13:25 ` Kulasek, TomaszX
2016-12-02 0:10 ` Ananyev, Konstantin
2016-12-22 13:14 ` Thomas Monjalon
2016-12-22 13:37 ` Jerin Jacob
2016-12-01 16:26 ` Thomas Monjalon
2016-12-01 16:28 ` Thomas Monjalon
2016-12-02 1:06 ` Ananyev, Konstantin
2016-12-02 8:24 ` Olivier Matz
2016-12-02 16:17 ` Ananyev, Konstantin
2016-12-08 17:24 ` Olivier Matz
2016-12-09 17:19 ` Kulasek, TomaszX
2016-12-12 11:51 ` Ananyev, Konstantin
2016-12-22 13:30 ` Thomas Monjalon
2016-12-22 14:11 ` Ananyev, Konstantin
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 2/6] e1000: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 3/6] fm10k: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 4/6] i40e: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 5/6] ixgbe: " Tomasz Kulasek
2016-11-23 17:36 ` [dpdk-dev] [PATCH v12 6/6] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-07 11:13 ` Ferruh Yigit
2016-12-07 12:00 ` Mcnamara, John
2016-12-07 12:12 ` Kulasek, TomaszX
2016-12-07 12:49 ` Ananyev, Konstantin
2016-12-07 12:00 ` Kulasek, TomaszX
2016-11-28 11:03 ` [dpdk-dev] [PATCH v12 0/6] add Tx preparation Thomas Monjalon
2016-11-30 5:48 ` John Daley (johndale)
2016-11-30 10:59 ` Ananyev, Konstantin
2016-11-30 7:40 ` Adrien Mazarguil
2016-11-30 8:50 ` Thomas Monjalon
2016-11-30 10:30 ` Kulasek, TomaszX
2016-12-01 7:19 ` Adrien Mazarguil
2016-11-30 10:54 ` Ananyev, Konstantin
2016-12-01 7:15 ` Adrien Mazarguil
2016-12-01 8:58 ` Thomas Monjalon
2016-12-01 22:03 ` Jerin Jacob
2016-12-02 1:00 ` Ananyev, Konstantin
2016-12-05 15:03 ` Adrien Mazarguil
2016-12-05 16:43 ` Ananyev, Konstantin
2016-12-05 18:10 ` Adrien Mazarguil
2016-12-06 10:56 ` Ananyev, Konstantin
2016-12-06 13:59 ` Adrien Mazarguil
2016-12-06 20:31 ` Ananyev, Konstantin
2016-12-07 10:08 ` Adrien Mazarguil
2016-11-30 16:34 ` Harish Patil
2016-11-30 17:42 ` Ananyev, Konstantin
2016-11-30 18:26 ` Thomas Monjalon
2016-11-30 21:01 ` Jerin Jacob
2016-12-01 10:50 ` Ferruh Yigit
2016-12-02 23:55 ` Yong Wang
2016-12-04 12:11 ` Ananyev, Konstantin
2016-12-06 18:25 ` Yong Wang
2016-12-07 9:57 ` Ferruh Yigit
2016-12-07 10:03 ` Ananyev, Konstantin
2016-12-07 14:31 ` Alejandro Lucero
2016-12-08 18:20 ` Yong Wang
2016-12-09 14:40 ` Jan Mędala
2016-12-12 15:02 ` Ananyev, Konstantin
2016-12-16 0:15 ` Ananyev, Konstantin
2016-12-16 13:53 ` Jan Mędala
2016-12-16 15:27 ` Ananyev, Konstantin
2016-12-16 15:37 ` Jan Mędala
2016-12-12 17:29 ` Ananyev, Konstantin
2016-11-30 18:39 ` Harish Patil
2016-11-30 19:37 ` Ajit Khaparde
2016-12-01 8:24 ` Rahul Lakkireddy
2016-12-06 15:53 ` Ferruh Yigit
2016-12-07 7:55 ` Andrew Rybchenko
2016-12-07 8:11 ` Yuanhan Liu
2016-12-07 10:13 ` Ananyev, Konstantin
2016-12-07 10:18 ` Yuanhan Liu
2016-12-07 10:22 ` Ananyev, Konstantin
2016-12-13 11:59 ` Ferruh Yigit
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 0/7] " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 1/7] ethdev: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 2/7] e1000: " Tomasz Kulasek
2016-12-13 17:41 ` Tomasz Kulasek [this message]
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 4/7] i40e: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 5/7] ixgbe: " Tomasz Kulasek
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 6/7] vmxnet3: " Tomasz Kulasek
2016-12-13 18:15 ` Yong Wang
2016-12-20 13:36 ` Ferruh Yigit
2016-12-22 13:10 ` Thomas Monjalon
2016-12-13 17:41 ` [dpdk-dev] [PATCH v13 7/7] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 0/8] add Tx preparation Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 1/8] ethdev: " Tomasz Kulasek
2016-12-22 14:24 ` Thomas Monjalon
2016-12-23 18:49 ` Kulasek, TomaszX
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 2/8] e1000: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 3/8] fm10k: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 4/8] i40e: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 5/8] ixgbe: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 6/8] vmxnet3: " Tomasz Kulasek
2016-12-22 17:59 ` Yong Wang
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 7/8] ena: " Tomasz Kulasek
2016-12-22 13:05 ` [dpdk-dev] [PATCH v14 8/8] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2016-12-22 14:28 ` Thomas Monjalon
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 0/8] add Tx preparation Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 1/8] ethdev: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 2/8] e1000: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 3/8] fm10k: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 4/8] i40e: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 5/8] ixgbe: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 6/8] vmxnet3: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 7/8] ena: " Tomasz Kulasek
2016-12-23 18:40 ` [dpdk-dev] [PATCH v15 8/8] testpmd: use Tx preparation in csum engine Tomasz Kulasek
2017-01-04 19:41 ` [dpdk-dev] [PATCH v15 0/8] add Tx preparation Thomas Monjalon
2017-01-05 15:43 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481650914-40324-4-git-send-email-tomaszx.kulasek@intel.com \
--to=tomaszx.kulasek@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).