[dpdk-dev] [PATCH v3 8/9] ethdev: Decouple interrupt handling from PCI device

[Jan Blunck <jblunck@infradead.org>]

The struct rte_intr_handle is an abstraction layer for different types of
interrupt mechanisms. It is embedded in the low-level device (e.g. PCI).
On allocation of a struct rte_eth_dev a reference to the intr_handle
should be stored for devices supporting interrupts.

Signed-off-by: Jan Blunck <jblunck@infradead.org>
---
 lib/librte_ether/rte_ethdev.c | 18 ++++++++++++++++--
 lib/librte_ether/rte_ethdev.h |  1 +
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 4288577..4ecea50 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -258,6 +258,7 @@ rte_eth_dev_pci_probe(struct rte_pci_driver *pci_drv,
 			rte_panic("Cannot allocate memzone for private port data\n");
 	}
 	eth_dev->pci_dev = pci_dev;
+	eth_dev->intr_handle = &pci_dev->intr_handle;
 	eth_dev->driver = eth_drv;
 	eth_dev->data->rx_mbuf_alloc_failed = 0;
 
@@ -2543,7 +2544,13 @@ rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data)
 	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
 
 	dev = &rte_eth_devices[port_id];
-	intr_handle = &dev->pci_dev->intr_handle;
+
+	if (!dev->intr_handle) {
+		RTE_PMD_DEBUG_TRACE("RX Intr handle unset\n");
+		return -ENOTSUP;
+	}
+
+	intr_handle = dev->intr_handle;
 	if (!intr_handle->intr_vec) {
 		RTE_PMD_DEBUG_TRACE("RX Intr vector unset\n");
 		return -EPERM;
@@ -2603,7 +2610,12 @@ rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
 		return -EINVAL;
 	}
 
-	intr_handle = &dev->pci_dev->intr_handle;
+	if (!dev->intr_handle) {
+		RTE_PMD_DEBUG_TRACE("RX Intr handle unset\n");
+		return -ENOTSUP;
+	}
+
+	intr_handle = dev->intr_handle;
 	if (!intr_handle->intr_vec) {
 		RTE_PMD_DEBUG_TRACE("RX Intr vector unset\n");
 		return -EPERM;
@@ -3205,6 +3217,8 @@ rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev, struct rte_pci_device *pci_de
 		return;
 	}
 
+	eth_dev->intr_handle = &pci_dev->intr_handle;
+
 	eth_dev->data->dev_flags = 0;
 	if (pci_dev->driver->drv_flags & RTE_PCI_DRV_INTR_LSC)
 		eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_LSC;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 3adbb2b..f1f656a 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1629,6 +1629,7 @@ struct rte_eth_dev {
 	const struct eth_driver *driver;/**< Driver for this device */
 	const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
 	struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
+	struct rte_intr_handle *intr_handle; /**< Device interrupt handle */
 	/** User application callbacks for NIC interrupts */
 	struct rte_eth_dev_cb_list link_intr_cbs;
 	/**
-- 
2.7.4