From: Jan Blunck <jblunck@infradead.org>
To: dev@dpdk.org
Cc: shreyansh.jain@nxp.com, david.marchand@6wind.com,
stephen@networkplumber.org
Subject: [dpdk-dev] [PATCH v5 15/20] szedata2: localize handling of pci resources
Date: Fri, 23 Dec 2016 16:58:06 +0100 [thread overview]
Message-ID: <1482508691-11408-16-git-send-email-jblunck@infradead.org> (raw)
In-Reply-To: <1482508691-11408-1-git-send-email-jblunck@infradead.org>
In-Reply-To: <1482332986-7599-1-git-send-email-jblunck@infradead.org>
This changes the driver to handle the PCI resource directly instead
of repeatedly going through eth_dev.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
---
drivers/net/szedata2/rte_eth_szedata2.c | 72 ++++++++++++++++++++-------------
drivers/net/szedata2/rte_eth_szedata2.h | 58 +++++++++++---------------
2 files changed, 67 insertions(+), 63 deletions(-)
diff --git a/drivers/net/szedata2/rte_eth_szedata2.c b/drivers/net/szedata2/rte_eth_szedata2.c
index 677ba9f..c4f6134 100644
--- a/drivers/net/szedata2/rte_eth_szedata2.c
+++ b/drivers/net/szedata2/rte_eth_szedata2.c
@@ -91,6 +91,7 @@ struct pmd_internals {
uint16_t max_rx_queues;
uint16_t max_tx_queues;
char sze_dev[PATH_MAX];
+ struct rte_mem_resource *pci_rsc;
};
static struct ether_addr eth_addr = {
@@ -1144,8 +1145,10 @@ eth_link_update(struct rte_eth_dev *dev,
struct rte_eth_link link;
struct rte_eth_link *link_ptr = &link;
struct rte_eth_link *dev_link = &dev->data->dev_link;
+ struct pmd_internals *internals = (struct pmd_internals *)
+ dev->data->dev_private;
volatile struct szedata2_cgmii_ibuf *ibuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_IBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_IBUF_BASE_OFF,
volatile struct szedata2_cgmii_ibuf *);
switch (cgmii_link_speed(ibuf)) {
@@ -1180,11 +1183,13 @@ eth_link_update(struct rte_eth_dev *dev,
static int
eth_dev_set_link_up(struct rte_eth_dev *dev)
{
+ struct pmd_internals *internals = (struct pmd_internals *)
+ dev->data->dev_private;
volatile struct szedata2_cgmii_ibuf *ibuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_IBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_IBUF_BASE_OFF,
volatile struct szedata2_cgmii_ibuf *);
volatile struct szedata2_cgmii_obuf *obuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_OBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_OBUF_BASE_OFF,
volatile struct szedata2_cgmii_obuf *);
cgmii_ibuf_enable(ibuf);
@@ -1195,11 +1200,13 @@ eth_dev_set_link_up(struct rte_eth_dev *dev)
static int
eth_dev_set_link_down(struct rte_eth_dev *dev)
{
+ struct pmd_internals *internals = (struct pmd_internals *)
+ dev->data->dev_private;
volatile struct szedata2_cgmii_ibuf *ibuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_IBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_IBUF_BASE_OFF,
volatile struct szedata2_cgmii_ibuf *);
volatile struct szedata2_cgmii_obuf *obuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_OBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_OBUF_BASE_OFF,
volatile struct szedata2_cgmii_obuf *);
cgmii_ibuf_disable(ibuf);
@@ -1281,8 +1288,10 @@ eth_mac_addr_set(struct rte_eth_dev *dev __rte_unused,
static void
eth_promiscuous_enable(struct rte_eth_dev *dev)
{
+ struct pmd_internals *internals = (struct pmd_internals *)
+ dev->data->dev_private;
volatile struct szedata2_cgmii_ibuf *ibuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_IBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_IBUF_BASE_OFF,
volatile struct szedata2_cgmii_ibuf *);
cgmii_ibuf_mac_mode_write(ibuf, SZEDATA2_MAC_CHMODE_PROMISC);
}
@@ -1290,8 +1299,10 @@ eth_promiscuous_enable(struct rte_eth_dev *dev)
static void
eth_promiscuous_disable(struct rte_eth_dev *dev)
{
+ struct pmd_internals *internals = (struct pmd_internals *)
+ dev->data->dev_private;
volatile struct szedata2_cgmii_ibuf *ibuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_IBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_IBUF_BASE_OFF,
volatile struct szedata2_cgmii_ibuf *);
cgmii_ibuf_mac_mode_write(ibuf, SZEDATA2_MAC_CHMODE_ONLY_VALID);
}
@@ -1299,8 +1310,10 @@ eth_promiscuous_disable(struct rte_eth_dev *dev)
static void
eth_allmulticast_enable(struct rte_eth_dev *dev)
{
+ struct pmd_internals *internals = (struct pmd_internals *)
+ dev->data->dev_private;
volatile struct szedata2_cgmii_ibuf *ibuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_IBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_IBUF_BASE_OFF,
volatile struct szedata2_cgmii_ibuf *);
cgmii_ibuf_mac_mode_write(ibuf, SZEDATA2_MAC_CHMODE_ALL_MULTICAST);
}
@@ -1308,8 +1321,10 @@ eth_allmulticast_enable(struct rte_eth_dev *dev)
static void
eth_allmulticast_disable(struct rte_eth_dev *dev)
{
+ struct pmd_internals *internals = (struct pmd_internals *)
+ dev->data->dev_private;
volatile struct szedata2_cgmii_ibuf *ibuf = SZEDATA2_PCI_RESOURCE_PTR(
- dev, SZEDATA2_CGMII_IBUF_BASE_OFF,
+ internals->pci_rsc, SZEDATA2_CGMII_IBUF_BASE_OFF,
volatile struct szedata2_cgmii_ibuf *);
cgmii_ibuf_mac_mode_write(ibuf, SZEDATA2_MAC_CHMODE_ONLY_VALID);
}
@@ -1349,7 +1364,7 @@ static const struct eth_dev_ops ops = {
* -1 on error
*/
static int
-get_szedata2_index(struct rte_eth_dev *dev, uint32_t *index)
+get_szedata2_index(const struct rte_pci_addr *pcislot_addr, uint32_t *index)
{
DIR *dir;
struct dirent *entry;
@@ -1357,7 +1372,6 @@ get_szedata2_index(struct rte_eth_dev *dev, uint32_t *index)
uint32_t tmp_index;
FILE *fd;
char pcislot_path[PATH_MAX];
- struct rte_pci_addr pcislot_addr = dev->pci_dev->addr;
uint32_t domain;
uint32_t bus;
uint32_t devid;
@@ -1392,10 +1406,10 @@ get_szedata2_index(struct rte_eth_dev *dev, uint32_t *index)
if (ret != 4)
continue;
- if (pcislot_addr.domain == domain &&
- pcislot_addr.bus == bus &&
- pcislot_addr.devid == devid &&
- pcislot_addr.function == function) {
+ if (pcislot_addr->domain == domain &&
+ pcislot_addr->bus == bus &&
+ pcislot_addr->devid == devid &&
+ pcislot_addr->function == function) {
*index = tmp_index;
closedir(dir);
return 0;
@@ -1415,9 +1429,10 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev)
struct szedata *szedata_temp;
int ret;
uint32_t szedata2_index;
- struct rte_pci_addr *pci_addr = &dev->pci_dev->addr;
+ struct rte_pci_device *pci_dev = dev->pci_dev;
+ struct rte_pci_addr *pci_addr = &pci_dev->addr;
struct rte_mem_resource *pci_rsc =
- &dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER];
+ &pci_dev->mem_resource[PCI_RESOURCE_NUMBER];
char rsc_filename[PATH_MAX];
void *pci_resource_ptr = NULL;
int fd;
@@ -1427,7 +1442,7 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev)
pci_addr->function);
/* Get index of szedata2 device file and create path to device file */
- ret = get_szedata2_index(dev, &szedata2_index);
+ ret = get_szedata2_index(pci_addr, &szedata2_index);
if (ret != 0) {
RTE_LOG(ERR, PMD, "Failed to get szedata2 device index!\n");
return -ENODEV;
@@ -1471,10 +1486,10 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev)
/* Set function callbacks for Ethernet API */
dev->dev_ops = &ops;
- rte_eth_copy_pci_info(dev, dev->pci_dev);
+ rte_eth_copy_pci_info(dev, pci_dev);
/* mmap pci resource0 file to rte_mem_resource structure */
- if (dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].phys_addr ==
+ if (pci_dev->mem_resource[PCI_RESOURCE_NUMBER].phys_addr ==
0) {
RTE_LOG(ERR, PMD, "Missing resource%u file\n",
PCI_RESOURCE_NUMBER);
@@ -1491,7 +1506,7 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev)
}
pci_resource_ptr = mmap(0,
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len,
+ pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len,
PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
close(fd);
if (pci_resource_ptr == NULL) {
@@ -1499,8 +1514,8 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev)
rsc_filename, fd);
return -EINVAL;
}
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr =
- pci_resource_ptr;
+ pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr = pci_resource_ptr;
+ internals->pci_rsc = pci_rsc;
RTE_LOG(DEBUG, PMD, "resource%u phys_addr = 0x%llx len = %llu "
"virt addr = %llx\n", PCI_RESOURCE_NUMBER,
@@ -1516,8 +1531,8 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev)
RTE_CACHE_LINE_SIZE);
if (data->mac_addrs == NULL) {
RTE_LOG(ERR, PMD, "Could not alloc space for MAC address!\n");
- munmap(dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr,
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len);
+ munmap(pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr,
+ pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len);
return -EINVAL;
}
@@ -1537,12 +1552,13 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev)
static int
rte_szedata2_eth_dev_uninit(struct rte_eth_dev *dev)
{
- struct rte_pci_addr *pci_addr = &dev->pci_dev->addr;
+ struct rte_pci_device *pci_dev = dev->pci_dev;
+ struct rte_pci_addr *pci_addr = &pci_dev->addr;
rte_free(dev->data->mac_addrs);
dev->data->mac_addrs = NULL;
- munmap(dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr,
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len);
+ munmap(pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr,
+ pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len);
RTE_LOG(INFO, PMD, "szedata2 device ("
PCI_PRI_FMT ") successfully uninitialized\n",
diff --git a/drivers/net/szedata2/rte_eth_szedata2.h b/drivers/net/szedata2/rte_eth_szedata2.h
index 522cf47..3b90924 100644
--- a/drivers/net/szedata2/rte_eth_szedata2.h
+++ b/drivers/net/szedata2/rte_eth_szedata2.h
@@ -117,94 +117,82 @@ struct szedata {
* @return Byte from PCI resource at offset "offset".
*/
static inline uint8_t
-pci_resource_read8(struct rte_eth_dev *dev, uint32_t offset)
+pci_resource_read8(struct rte_mem_resource *rsc, uint32_t offset)
{
- return *((uint8_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset));
+ return *((uint8_t *)((uint8_t *)rsc->addr + offset));
}
/*
* @return Two bytes from PCI resource starting at offset "offset".
*/
static inline uint16_t
-pci_resource_read16(struct rte_eth_dev *dev, uint32_t offset)
+pci_resource_read16(struct rte_mem_resource *rsc, uint32_t offset)
{
- return rte_le_to_cpu_16(*((uint16_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset)));
+ return rte_le_to_cpu_16(*((uint16_t *)((uint8_t *)rsc->addr +
+ offset)));
}
/*
* @return Four bytes from PCI resource starting at offset "offset".
*/
static inline uint32_t
-pci_resource_read32(struct rte_eth_dev *dev, uint32_t offset)
+pci_resource_read32(struct rte_mem_resource *rsc, uint32_t offset)
{
- return rte_le_to_cpu_32(*((uint32_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset)));
+ return rte_le_to_cpu_32(*((uint32_t *)((uint8_t *)rsc->addr +
+ offset)));
}
/*
* @return Eight bytes from PCI resource starting at offset "offset".
*/
static inline uint64_t
-pci_resource_read64(struct rte_eth_dev *dev, uint32_t offset)
+pci_resource_read64(struct rte_mem_resource *rsc, uint32_t offset)
{
- return rte_le_to_cpu_64(*((uint64_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset)));
+ return rte_le_to_cpu_64(*((uint64_t *)((uint8_t *)rsc->addr +
+ offset)));
}
/*
* Write one byte to PCI resource address space at offset "offset".
*/
static inline void
-pci_resource_write8(struct rte_eth_dev *dev, uint32_t offset, uint8_t val)
+pci_resource_write8(struct rte_mem_resource *rsc, uint32_t offset, uint8_t val)
{
- *((uint8_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset)) = val;
+ *((uint8_t *)((uint8_t *)rsc->addr + offset)) = val;
}
/*
* Write two bytes to PCI resource address space at offset "offset".
*/
static inline void
-pci_resource_write16(struct rte_eth_dev *dev, uint32_t offset, uint16_t val)
+pci_resource_write16(struct rte_mem_resource *rsc, uint32_t offset,
+ uint16_t val)
{
- *((uint16_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset)) = rte_cpu_to_le_16(val);
+ *((uint16_t *)((uint8_t *)rsc->addr + offset)) = rte_cpu_to_le_16(val);
}
/*
* Write four bytes to PCI resource address space at offset "offset".
*/
static inline void
-pci_resource_write32(struct rte_eth_dev *dev, uint32_t offset, uint32_t val)
+pci_resource_write32(struct rte_mem_resource *rsc, uint32_t offset,
+ uint32_t val)
{
- *((uint32_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset)) = rte_cpu_to_le_32(val);
+ *((uint32_t *)((uint8_t *)rsc->addr + offset)) = rte_cpu_to_le_32(val);
}
/*
* Write eight bytes to PCI resource address space at offset "offset".
*/
static inline void
-pci_resource_write64(struct rte_eth_dev *dev, uint32_t offset, uint64_t val)
+pci_resource_write64(struct rte_mem_resource *rsc, uint32_t offset,
+ uint64_t val)
{
- *((uint64_t *)((uint8_t *)
- dev->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr +
- offset)) = rte_cpu_to_le_64(val);
+ *((uint64_t *)((uint8_t *)rsc->addr + offset)) = rte_cpu_to_le_64(val);
}
#define SZEDATA2_PCI_RESOURCE_PTR(dev, offset, type) \
- ((type)((uint8_t *) \
- ((dev)->pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr) \
- + (offset)))
+ ((type)((uint8_t *)(rsc)->addr) + (offset)))
enum szedata2_link_speed {
SZEDATA2_LINK_SPEED_DEFAULT = 0,
--
2.7.4
next prev parent reply other threads:[~2016-12-23 15:58 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-21 15:09 [dpdk-dev] [PATCH v4 00/23] Decouple ethdev from PCI device Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 01/23] eal: define container_of macro Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 02/23] eal: Allow passing const rte_intr_handle Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 03/23] rte_device: make driver pointer const Jan Blunck
2016-12-22 7:18 ` Shreyansh Jain
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 04/23] pmd: remove useless reset of dev_info->dev_pci Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 05/23] e1000: localize mapping from eth_dev to pci Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 06/23] ixgbe: localize mapping from eth_dev to pci_device Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 07/23] i40e: localize mapping of eth_dev to pci Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 08/23] broadcom: localize mapping from " Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 09/23] virtio: Don't fill dev_info->driver_name Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 10/23] virtio: Add vtpci_intr_handle() helper to get rte_intr_handle Jan Blunck
2016-12-21 20:08 ` Stephen Hemminger
2016-12-23 11:04 ` Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 11/23] virtio: Don't depend on struct rte_eth_dev's pci_dev Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 12/23] bnx2x: localize mapping from eth_dev to pci Jan Blunck
2016-12-21 16:35 ` Harish Patil
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 13/23] fm10k: " Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 14/23] qede: localize mapping of " Jan Blunck
2016-12-21 16:35 ` Harish Patil
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 15/23] szedata2: localize handling of pci resources Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 16/23] nfp: localize rte_pci_device handling Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 17/23] vmxnet3: use eth_dev->data->drv_name instead of pci_drv name Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 18/23] ethdev: Helper to map to struct rte_pci_device Jan Blunck
2016-12-22 15:21 ` Thomas Monjalon
2016-12-22 18:13 ` Jan Blunck
2016-12-23 8:30 ` Thomas Monjalon
2016-12-23 10:27 ` Jan Blunck
2016-12-23 12:47 ` Thomas Monjalon
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 19/23] drivers: Replace per-PMD macros with rte_eth_dev_to_pci() helper Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 20/23] drivers: Use " Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 21/23] ethdev: Move filling of rte_eth_dev_info->pci_dev to dev_infos_get() Jan Blunck
2016-12-21 20:09 ` Stephen Hemminger
2016-12-22 8:11 ` Shreyansh Jain
2016-12-23 10:50 ` Jan Blunck
2016-12-23 11:11 ` Shreyansh Jain
[not found] ` <CALe+Z005ByAFq03su4VO_=sH299zS_zAQWjyfyW8jQ3sD7zPrw@mail.gmail.com>
2016-12-23 11:39 ` Shreyansh Jain
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 22/23] ethdev: Decouple interrupt handling from PCI device Jan Blunck
2016-12-22 15:13 ` Thomas Monjalon
2016-12-22 18:26 ` Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 23/23] ethdev: Decouple struct rte_eth_dev from struct rte_pci_device Jan Blunck
2016-12-22 15:22 ` Thomas Monjalon
2016-12-22 15:26 ` [dpdk-dev] [PATCH v4 00/23] Decouple ethdev from PCI device Thomas Monjalon
2016-12-23 14:28 ` Thomas Monjalon
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 00/20] " Jan Blunck
2016-12-25 22:33 ` Thomas Monjalon
2017-01-03 12:20 ` Ferruh Yigit
2017-01-06 10:07 ` Andrew Rybchenko
2017-01-03 12:24 ` Ferruh Yigit
2017-01-03 14:06 ` Thomas Monjalon
2017-01-03 14:40 ` Ferruh Yigit
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 01/20] eal: define container_of macro Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 02/20] eal: Allow passing const rte_intr_handle Jan Blunck
2017-01-17 4:42 ` Tan, Jianfeng
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 03/20] rte_device: make driver pointer const Jan Blunck
2016-12-23 16:19 ` Thomas Monjalon
2016-12-23 22:08 ` Stephen Hemminger
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 04/20] pmd: remove useless reset of dev_info->dev_pci Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 05/20] e1000: localize mapping from eth_dev to pci Jan Blunck
2016-12-23 16:20 ` Thomas Monjalon
2016-12-23 22:06 ` Stephen Hemminger
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 06/20] ixgbe: localize mapping from eth_dev to pci_device Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 07/20] i40e: localize mapping of eth_dev to pci Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 08/20] broadcom: localize mapping from " Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 09/20] virtio: Don't fill dev_info->driver_name Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 10/20] virtio: Add vtpci_intr_handle() helper to get rte_intr_handle Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 11/20] virtio: Don't depend on struct rte_eth_dev's pci_dev Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 12/20] bnx2x: localize mapping from eth_dev to pci Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 13/20] fm10k: " Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 14/20] qede: localize mapping of " Jan Blunck
2016-12-23 15:58 ` Jan Blunck [this message]
2016-12-23 18:31 ` [dpdk-dev] [PATCH v5 15/20] szedata2: localize handling of pci resources Thomas Monjalon
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 16/20] nfp: localize rte_pci_device handling Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 17/20] vmxnet3: use eth_dev->data->drv_name instead of pci_drv name Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 18/20] ethdev: Decouple interrupt handling from PCI device Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 19/20] ethdev: Move dev_info filling of PCI information into drivers Jan Blunck
2016-12-23 18:45 ` Thomas Monjalon
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 20/20] ethdev: Decouple from PCI device Jan Blunck
2016-12-23 16:17 ` Thomas Monjalon
2016-12-23 16:20 ` Jan Blunck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482508691-11408-16-git-send-email-jblunck@infradead.org \
--to=jblunck@infradead.org \
--cc=david.marchand@6wind.com \
--cc=dev@dpdk.org \
--cc=shreyansh.jain@nxp.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).