From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: <dev@dpdk.org>
Cc: <thomas.monjalon@6wind.com>, <bruce.richardson@intel.com>,
<shreyansh.jain@nxp.com>, <john.mcnamara@intel.com>,
<ferruh.yigit@intel.com>, <jerin.jacob@caviumnetworks.com>,
Cristian Sovaiala <cristian.sovaiala@nxp.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [PATCHv6 08/33] bus/fslmc: add mc dpseci object support
Date: Mon, 23 Jan 2017 17:29:38 +0530 [thread overview]
Message-ID: <1485172803-17288-9-git-send-email-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <1485172803-17288-1-git-send-email-hemant.agrawal@nxp.com>
dpseci represent a instance of SEC HW in DPAA2.
Signed-off-by: Cristian Sovaiala <cristian.sovaiala@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
drivers/bus/fslmc/Makefile | 1 +
drivers/bus/fslmc/mc/dpseci.c | 534 ++++++++++++++++++++++
drivers/bus/fslmc/mc/fsl_dpseci.h | 668 ++++++++++++++++++++++++++++
drivers/bus/fslmc/mc/fsl_dpseci_cmd.h | 255 +++++++++++
drivers/bus/fslmc/rte_bus_fslmc_version.map | 10 +
5 files changed, 1468 insertions(+)
create mode 100644 drivers/bus/fslmc/mc/dpseci.c
create mode 100644 drivers/bus/fslmc/mc/fsl_dpseci.h
create mode 100644 drivers/bus/fslmc/mc/fsl_dpseci_cmd.h
diff --git a/drivers/bus/fslmc/Makefile b/drivers/bus/fslmc/Makefile
index 628e517..4a118a3 100644
--- a/drivers/bus/fslmc/Makefile
+++ b/drivers/bus/fslmc/Makefile
@@ -50,6 +50,7 @@ LIBABIVER := 1
SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += \
mc/dpni.c \
+ mc/dpseci.c \
mc/dpbp.c \
mc/dpio.c \
mc/mc_sys.c
diff --git a/drivers/bus/fslmc/mc/dpseci.c b/drivers/bus/fslmc/mc/dpseci.c
new file mode 100644
index 0000000..bc8c9c5
--- /dev/null
+++ b/drivers/bus/fslmc/mc/dpseci.c
@@ -0,0 +1,534 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <fsl_mc_sys.h>
+#include <fsl_mc_cmd.h>
+#include <fsl_dpseci.h>
+#include <fsl_dpseci_cmd.h>
+
+int dpseci_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpseci_id,
+ uint16_t *token)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_OPEN,
+ cmd_flags,
+ 0);
+ DPSECI_CMD_OPEN(cmd, dpseci_id);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ *token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+ return 0;
+}
+
+int dpseci_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CLOSE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpseci_cfg *cfg,
+ uint32_t *obj_id)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CREATE,
+ cmd_flags,
+ dprc_token);
+ DPSECI_CMD_CREATE(cmd, cfg);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ CMD_CREATE_RSP_GET_OBJ_ID_PARAM0(cmd, *obj_id);
+
+ return 0;
+}
+
+int dpseci_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_DESTROY,
+ cmd_flags,
+ dprc_token);
+ /* set object id to destroy */
+ CMD_DESTROY_SET_OBJ_ID_PARAM0(cmd, object_id);
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_ENABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_DISABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_IS_ENABLED,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_IS_ENABLED(cmd, *en);
+
+ return 0;
+}
+
+int dpseci_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_RESET,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_get_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ int *type,
+ struct dpseci_irq_cfg *irq_cfg)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ(cmd, irq_index);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ(cmd, *type, irq_cfg);
+
+ return 0;
+}
+
+int dpseci_set_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ struct dpseci_irq_cfg *irq_cfg)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_IRQ(cmd, irq_index, irq_cfg);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_get_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t *en)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_ENABLE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ_ENABLE(cmd, irq_index);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ_ENABLE(cmd, *en);
+
+ return 0;
+}
+
+int dpseci_set_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t en)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ_ENABLE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_IRQ_ENABLE(cmd, irq_index, en);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_get_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *mask)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_MASK,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ_MASK(cmd, irq_index);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ_MASK(cmd, *mask);
+
+ return 0;
+}
+
+int dpseci_set_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t mask)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ_MASK,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_IRQ_MASK(cmd, irq_index, mask);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_get_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *status)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_STATUS,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ_STATUS(cmd, irq_index, *status);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ_STATUS(cmd, *status);
+
+ return 0;
+}
+
+int dpseci_clear_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t status)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CLEAR_IRQ_STATUS,
+ cmd_flags,
+ token);
+ DPSECI_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_ATTR,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_ATTR(cmd, attr);
+
+ return 0;
+}
+
+int dpseci_set_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ const struct dpseci_rx_queue_cfg *cfg)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_RX_QUEUE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_RX_QUEUE(cmd, queue, cfg);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpseci_get_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_rx_queue_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_RX_QUEUE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_RX_QUEUE(cmd, queue);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_RX_QUEUE(cmd, attr);
+
+ return 0;
+}
+
+int dpseci_get_tx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_tx_queue_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_TX_QUEUE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_TX_QUEUE(cmd, queue);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_TX_QUEUE(cmd, attr);
+
+ return 0;
+}
+
+int dpseci_get_sec_attr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_SEC_ATTR,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_SEC_ATTR(cmd, attr);
+
+ return 0;
+}
+
+int dpseci_get_sec_counters(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_counters *counters)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_SEC_COUNTERS,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_SEC_COUNTERS(cmd, counters);
+
+ return 0;
+}
+
+int dpseci_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_API_VERSION,
+ cmd_flags,
+ 0);
+
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ DPSECI_RSP_GET_API_VERSION(cmd, *major_ver, *minor_ver);
+
+ return 0;
+}
diff --git a/drivers/bus/fslmc/mc/fsl_dpseci.h b/drivers/bus/fslmc/mc/fsl_dpseci.h
new file mode 100644
index 0000000..b8c6dcc
--- /dev/null
+++ b/drivers/bus/fslmc/mc/fsl_dpseci.h
@@ -0,0 +1,668 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __FSL_DPSECI_H
+#define __FSL_DPSECI_H
+
+/* Data Path SEC Interface API
+ * Contains initialization APIs and runtime control APIs for DPSECI
+ */
+
+struct fsl_mc_io;
+
+/**
+ * General DPSECI macros
+ */
+
+/**
+ * Maximum number of Tx/Rx priorities per DPSECI object
+ */
+#define DPSECI_PRIO_NUM 8
+
+/**
+ * All queues considered; see dpseci_set_rx_queue()
+ */
+#define DPSECI_ALL_QUEUES (uint8_t)(-1)
+
+/**
+ * dpseci_open() - Open a control session for the specified object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @dpseci_id: DPSECI unique ID
+ * @token: Returned token; use in subsequent API calls
+ *
+ * This function can be used to open a control session for an
+ * already created object; an object may have been declared in
+ * the DPL or by calling the dpseci_create() function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent commands for
+ * this specific object.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpseci_id,
+ uint16_t *token);
+
+/**
+ * dpseci_close() - Close the control session of the object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ *
+ * After this function is called, no further operations are
+ * allowed on the object without opening a new control session.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * struct dpseci_cfg - Structure representing DPSECI configuration
+ * @num_tx_queues: num of queues towards the SEC
+ * @num_rx_queues: num of queues back from the SEC
+ * @priorities: Priorities for the SEC hardware processing;
+ * each place in the array is the priority of the tx queue
+ * towards the SEC,
+ * valid priorities are configured with values 1-8;
+ */
+struct dpseci_cfg {
+ uint8_t num_tx_queues;
+ uint8_t num_rx_queues;
+ uint8_t priorities[DPSECI_PRIO_NUM];
+};
+
+/**
+ * dpseci_create() - Create the DPSECI object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @dprc_token: Parent container token; '0' for default container
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @cfg: Configuration structure
+ * @obj_id: returned object id
+ *
+ * Create the DPSECI object, allocate required resources and
+ * perform required initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ *
+ * The function accepts an authentication token of a parent
+ * container that this object should be assigned to. The token
+ * can be '0' so the object will be assigned to the default container.
+ * The newly created object can be opened with the returned
+ * object id and using the container's associated tokens and MC portals.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpseci_cfg *cfg,
+ uint32_t *obj_id);
+
+/**
+ * dpseci_destroy() - Destroy the DPSECI object and release all its resources.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @dprc_token: Parent container token; '0' for default container
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @object_id: The object id; it must be a valid id within the container that
+ * created this object;
+ *
+ * The function accepts the authentication token of the parent container that
+ * created the object (not the one that currently owns the object). The object
+ * is searched within parent using the provided 'object_id'.
+ * All tokens to the object must be closed before calling destroy.
+ *
+ * Return: '0' on Success; error code otherwise.
+ */
+int dpseci_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id);
+
+/**
+ * dpseci_enable() - Enable the DPSECI, allow sending and receiving frames.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpseci_disable() - Disable the DPSECI, stop sending and receiving frames.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpseci_is_enabled() - Check if the DPSECI is enabled.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @en: Returns '1' if object is enabled; '0' otherwise
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en);
+
+/**
+ * dpseci_reset() - Reset the DPSECI, returns the object to initial state.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * struct dpseci_irq_cfg - IRQ configuration
+ * @addr: Address that must be written to signal a message-based interrupt
+ * @val: Value to write into irq_addr address
+ * @irq_num: A user defined number associated with this IRQ
+ */
+struct dpseci_irq_cfg {
+ uint64_t addr;
+ uint32_t val;
+ int irq_num;
+};
+
+/**
+ * dpseci_set_irq() - Set IRQ information for the DPSECI to trigger an interrupt
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: Identifies the interrupt index to configure
+ * @irq_cfg: IRQ configuration
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_set_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ struct dpseci_irq_cfg *irq_cfg);
+
+/**
+ * dpseci_get_irq() - Get IRQ information from the DPSECI
+ *
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: The interrupt index to configure
+ * @type: Interrupt type: 0 represents message interrupt
+ * type (both irq_addr and irq_val are valid)
+ * @irq_cfg: IRQ attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ int *type,
+ struct dpseci_irq_cfg *irq_cfg);
+
+/**
+ * dpseci_set_irq_enable() - Set overall interrupt state.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: The interrupt index to configure
+ * @en: Interrupt state - enable = 1, disable = 0
+ *
+ * Allows GPP software to control when interrupts are generated.
+ * Each interrupt can have up to 32 causes. The enable/disable control's the
+ * overall interrupt state. if the interrupt is disabled no causes will cause
+ * an interrupt
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_set_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t en);
+
+/**
+ * dpseci_get_irq_enable() - Get overall interrupt state
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: The interrupt index to configure
+ * @en: Returned Interrupt state - enable = 1, disable = 0
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t *en);
+
+/**
+ * dpseci_set_irq_mask() - Set interrupt mask.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: The interrupt index to configure
+ * @mask: event mask to trigger interrupt;
+ * each bit:
+ * 0 = ignore event
+ * 1 = consider event for asserting IRQ
+ *
+ * Every interrupt can have up to 32 causes and the interrupt model supports
+ * masking/unmasking each cause independently
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_set_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t mask);
+
+/**
+ * dpseci_get_irq_mask() - Get interrupt mask.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: The interrupt index to configure
+ * @mask: Returned event mask to trigger interrupt
+ *
+ * Every interrupt can have up to 32 causes and the interrupt model supports
+ * masking/unmasking each cause independently
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *mask);
+
+/**
+ * dpseci_get_irq_status() - Get the current status of any pending interrupts
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: The interrupt index to configure
+ * @status: Returned interrupts status - one bit per cause:
+ * 0 = no interrupt pending
+ * 1 = interrupt pending
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *status);
+
+/**
+ * dpseci_clear_irq_status() - Clear a pending interrupt's status
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @irq_index: The interrupt index to configure
+ * @status: bits to clear (W1C) - one bit per cause:
+ * 0 = don't change
+ * 1 = clear status bit
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_clear_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t status);
+
+/**
+ * struct dpseci_attr - Structure representing DPSECI attributes
+ * @id: DPSECI object ID
+ * @num_tx_queues: number of queues towards the SEC
+ * @num_rx_queues: number of queues back from the SEC
+ */
+struct dpseci_attr {
+ int id;
+ uint8_t num_tx_queues;
+ uint8_t num_rx_queues;
+};
+
+/**
+ * dpseci_get_attributes() - Retrieve DPSECI attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @attr: Returned object's attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_attr *attr);
+
+/**
+ * enum dpseci_dest - DPSECI destination types
+ * @DPSECI_DEST_NONE: Unassigned destination; The queue is set in parked mode
+ * and does not generate FQDAN notifications; user is expected to
+ * dequeue from the queue based on polling or other user-defined
+ * method
+ * @DPSECI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
+ * notifications to the specified DPIO; user is expected to dequeue
+ * from the queue only after notification is received
+ * @DPSECI_DEST_DPCON: The queue is set in schedule mode and does not generate
+ * FQDAN notifications, but is connected to the specified DPCON
+ * object; user is expected to dequeue from the DPCON channel
+ */
+enum dpseci_dest {
+ DPSECI_DEST_NONE = 0,
+ DPSECI_DEST_DPIO = 1,
+ DPSECI_DEST_DPCON = 2
+};
+
+/**
+ * struct dpseci_dest_cfg - Structure representing DPSECI destination parameters
+ * @dest_type: Destination type
+ * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type
+ * @priority: Priority selection within the DPIO or DPCON channel; valid values
+ * are 0-1 or 0-7, depending on the number of priorities in that
+ * channel; not relevant for 'DPSECI_DEST_NONE' option
+ */
+struct dpseci_dest_cfg {
+ enum dpseci_dest dest_type;
+ int dest_id;
+ uint8_t priority;
+};
+
+/**
+ * DPSECI queue modification options
+ */
+
+/**
+ * Select to modify the user's context associated with the queue
+ */
+#define DPSECI_QUEUE_OPT_USER_CTX 0x00000001
+
+/**
+ * Select to modify the queue's destination
+ */
+#define DPSECI_QUEUE_OPT_DEST 0x00000002
+
+/**
+ * Select to modify the queue's order preservation
+ */
+#define DPSECI_QUEUE_OPT_ORDER_PRESERVATION 0x00000004
+
+/**
+ * struct dpseci_rx_queue_cfg - DPSECI RX queue configuration
+ * @options: Flags representing the suggested modifications to the queue;
+ * Use any combination of 'DPSECI_QUEUE_OPT_<X>' flags
+ * @order_preservation_en: order preservation configuration for the rx queue
+ * valid only if 'DPSECI_QUEUE_OPT_ORDER_PRESERVATION' is contained in 'options'
+ * @user_ctx: User context value provided in the frame descriptor of each
+ * dequeued frame;
+ * valid only if 'DPSECI_QUEUE_OPT_USER_CTX' is contained in 'options'
+ * @dest_cfg: Queue destination parameters;
+ * valid only if 'DPSECI_QUEUE_OPT_DEST' is contained in 'options'
+ */
+struct dpseci_rx_queue_cfg {
+ uint32_t options;
+ int order_preservation_en;
+ uint64_t user_ctx;
+ struct dpseci_dest_cfg dest_cfg;
+};
+
+/**
+ * dpseci_set_rx_queue() - Set Rx queue configuration
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @queue: Select the queue relative to number of
+ * priorities configured at DPSECI creation; use
+ * DPSECI_ALL_QUEUES to configure all Rx queues identically.
+ * @cfg: Rx queue configuration
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_set_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ const struct dpseci_rx_queue_cfg *cfg);
+
+/**
+ * struct dpseci_rx_queue_attr - Structure representing attributes of Rx queues
+ * @user_ctx: User context value provided in the frame descriptor of each
+ * dequeued frame
+ * @order_preservation_en: Status of the order preservation configuration
+ * on the queue
+ * @dest_cfg: Queue destination configuration
+ * @fqid: Virtual FQID value to be used for dequeue operations
+ */
+struct dpseci_rx_queue_attr {
+ uint64_t user_ctx;
+ int order_preservation_en;
+ struct dpseci_dest_cfg dest_cfg;
+ uint32_t fqid;
+};
+
+/**
+ * dpseci_get_rx_queue() - Retrieve Rx queue attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @queue: Select the queue relative to number of
+ * priorities configured at DPSECI creation
+ * @attr: Returned Rx queue attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_rx_queue_attr *attr);
+
+/**
+ * struct dpseci_tx_queue_attr - Structure representing attributes of Tx queues
+ * @fqid: Virtual FQID to be used for sending frames to SEC hardware
+ * @priority: SEC hardware processing priority for the queue
+ */
+struct dpseci_tx_queue_attr {
+ uint32_t fqid;
+ uint8_t priority;
+};
+
+/**
+ * dpseci_get_tx_queue() - Retrieve Tx queue attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @queue: Select the queue relative to number of
+ * priorities configured at DPSECI creation
+ * @attr: Returned Tx queue attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_tx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_tx_queue_attr *attr);
+
+/**
+ * struct dpseci_sec_attr - Structure representing attributes of the SEC
+ * hardware accelerator
+ * @ip_id: ID for SEC.
+ * @major_rev: Major revision number for SEC.
+ * @minor_rev: Minor revision number for SEC.
+ * @era: SEC Era.
+ * @deco_num: The number of copies of the DECO that are implemented in
+ * this version of SEC.
+ * @zuc_auth_acc_num: The number of copies of ZUCA that are implemented
+ * in this version of SEC.
+ * @zuc_enc_acc_num: The number of copies of ZUCE that are implemented
+ * in this version of SEC.
+ * @snow_f8_acc_num: The number of copies of the SNOW-f8 module that are
+ * implemented in this version of SEC.
+ * @snow_f9_acc_num: The number of copies of the SNOW-f9 module that are
+ * implemented in this version of SEC.
+ * @crc_acc_num: The number of copies of the CRC module that are implemented
+ * in this version of SEC.
+ * @pk_acc_num: The number of copies of the Public Key module that are
+ * implemented in this version of SEC.
+ * @kasumi_acc_num: The number of copies of the Kasumi module that are
+ * implemented in this version of SEC.
+ * @rng_acc_num: The number of copies of the Random Number Generator that are
+ * implemented in this version of SEC.
+ * @md_acc_num: The number of copies of the MDHA (Hashing module) that are
+ * implemented in this version of SEC.
+ * @arc4_acc_num: The number of copies of the ARC4 module that are implemented
+ * in this version of SEC.
+ * @des_acc_num: The number of copies of the DES module that are implemented
+ * in this version of SEC.
+ * @aes_acc_num: The number of copies of the AES module that are implemented
+ * in this version of SEC.
+ **/
+
+struct dpseci_sec_attr {
+ uint16_t ip_id;
+ uint8_t major_rev;
+ uint8_t minor_rev;
+ uint8_t era;
+ uint8_t deco_num;
+ uint8_t zuc_auth_acc_num;
+ uint8_t zuc_enc_acc_num;
+ uint8_t snow_f8_acc_num;
+ uint8_t snow_f9_acc_num;
+ uint8_t crc_acc_num;
+ uint8_t pk_acc_num;
+ uint8_t kasumi_acc_num;
+ uint8_t rng_acc_num;
+ uint8_t md_acc_num;
+ uint8_t arc4_acc_num;
+ uint8_t des_acc_num;
+ uint8_t aes_acc_num;
+};
+
+/**
+ * dpseci_get_sec_attr() - Retrieve SEC accelerator attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @attr: Returned SEC attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_sec_attr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_attr *attr);
+
+/**
+ * struct dpseci_sec_counters - Structure representing global SEC counters and
+ * not per dpseci counters
+ * @dequeued_requests: Number of Requests Dequeued
+ * @ob_enc_requests: Number of Outbound Encrypt Requests
+ * @ib_dec_requests: Number of Inbound Decrypt Requests
+ * @ob_enc_bytes: Number of Outbound Bytes Encrypted
+ * @ob_prot_bytes: Number of Outbound Bytes Protected
+ * @ib_dec_bytes: Number of Inbound Bytes Decrypted
+ * @ib_valid_bytes: Number of Inbound Bytes Validated
+ */
+struct dpseci_sec_counters {
+ uint64_t dequeued_requests;
+ uint64_t ob_enc_requests;
+ uint64_t ib_dec_requests;
+ uint64_t ob_enc_bytes;
+ uint64_t ob_prot_bytes;
+ uint64_t ib_dec_bytes;
+ uint64_t ib_valid_bytes;
+};
+
+/**
+ * dpseci_get_sec_counters() - Retrieve SEC accelerator counters.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPSECI object
+ * @counters: Returned SEC counters
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_sec_counters(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_counters *counters);
+
+/**
+ * dpseci_get_api_version() - Get Data Path SEC Interface API version
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @major_ver: Major version of data path sec API
+ * @minor_ver: Minor version of data path sec API
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpseci_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver);
+
+#endif /* __FSL_DPSECI_H */
diff --git a/drivers/bus/fslmc/mc/fsl_dpseci_cmd.h b/drivers/bus/fslmc/mc/fsl_dpseci_cmd.h
new file mode 100644
index 0000000..97494f4
--- /dev/null
+++ b/drivers/bus/fslmc/mc/fsl_dpseci_cmd.h
@@ -0,0 +1,255 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_DPSECI_CMD_H
+#define _FSL_DPSECI_CMD_H
+
+/* DPSECI Version */
+#define DPSECI_VER_MAJOR 5
+#define DPSECI_VER_MINOR 0
+
+/* Command IDs */
+#define DPSECI_CMDID_CLOSE ((0x800 << 4) | (0x1))
+#define DPSECI_CMDID_OPEN ((0x809 << 4) | (0x1))
+#define DPSECI_CMDID_CREATE ((0x909 << 4) | (0x1))
+#define DPSECI_CMDID_DESTROY ((0x989 << 4) | (0x1))
+#define DPSECI_CMDID_GET_API_VERSION ((0xa09 << 4) | (0x1))
+
+#define DPSECI_CMDID_ENABLE ((0x002 << 4) | (0x1))
+#define DPSECI_CMDID_DISABLE ((0x003 << 4) | (0x1))
+#define DPSECI_CMDID_GET_ATTR ((0x004 << 4) | (0x1))
+#define DPSECI_CMDID_RESET ((0x005 << 4) | (0x1))
+#define DPSECI_CMDID_IS_ENABLED ((0x006 << 4) | (0x1))
+
+#define DPSECI_CMDID_SET_IRQ ((0x010 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ ((0x011 << 4) | (0x1))
+#define DPSECI_CMDID_SET_IRQ_ENABLE ((0x012 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ_ENABLE ((0x013 << 4) | (0x1))
+#define DPSECI_CMDID_SET_IRQ_MASK ((0x014 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ_MASK ((0x015 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ_STATUS ((0x016 << 4) | (0x1))
+#define DPSECI_CMDID_CLEAR_IRQ_STATUS ((0x017 << 4) | (0x1))
+
+#define DPSECI_CMDID_SET_RX_QUEUE ((0x194 << 4) | (0x1))
+#define DPSECI_CMDID_GET_RX_QUEUE ((0x196 << 4) | (0x1))
+#define DPSECI_CMDID_GET_TX_QUEUE ((0x197 << 4) | (0x1))
+#define DPSECI_CMDID_GET_SEC_ATTR ((0x198 << 4) | (0x1))
+#define DPSECI_CMDID_GET_SEC_COUNTERS ((0x199 << 4) | (0x1))
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_OPEN(cmd, dpseci_id) \
+ MC_CMD_OP(cmd, 0, 0, 32, int, dpseci_id)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_CREATE(cmd, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->priorities[0]);\
+ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, cfg->priorities[1]);\
+ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->priorities[2]);\
+ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->priorities[3]);\
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->priorities[4]);\
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, cfg->priorities[5]);\
+ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, cfg->priorities[6]);\
+ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, cfg->priorities[7]);\
+ MC_CMD_OP(cmd, 1, 0, 8, uint8_t, cfg->num_tx_queues);\
+ MC_CMD_OP(cmd, 1, 8, 8, uint8_t, cfg->num_rx_queues);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_IS_ENABLED(cmd, en) \
+ MC_RSP_OP(cmd, 0, 0, 1, int, en)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\
+ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\
+ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\
+ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ(cmd, type, irq_cfg) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \
+ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\
+ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \
+ MC_RSP_OP(cmd, 2, 32, 32, int, type); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_IRQ_ENABLE(cmd, irq_index, enable_state) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, enable_state); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ_ENABLE(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ_ENABLE(cmd, enable_state) \
+ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, enable_state)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ_MASK(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ_MASK(cmd, mask) \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ_STATUS(cmd, status) \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_ATTR(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, attr->id); \
+ MC_RSP_OP(cmd, 1, 0, 8, uint8_t, attr->num_tx_queues); \
+ MC_RSP_OP(cmd, 1, 8, 8, uint8_t, attr->num_rx_queues); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_RX_QUEUE(cmd, queue, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dest_cfg.dest_id); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->dest_cfg.priority); \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, queue); \
+ MC_CMD_OP(cmd, 0, 48, 4, enum dpseci_dest, cfg->dest_cfg.dest_type); \
+ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx); \
+ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->options);\
+ MC_CMD_OP(cmd, 2, 32, 1, int, cfg->order_preservation_en);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_RX_QUEUE(cmd, queue) \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, queue)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_RX_QUEUE(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, attr->dest_cfg.dest_id);\
+ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->dest_cfg.priority);\
+ MC_RSP_OP(cmd, 0, 48, 4, enum dpseci_dest, attr->dest_cfg.dest_type);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint64_t, attr->user_ctx);\
+ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->fqid);\
+ MC_RSP_OP(cmd, 2, 32, 1, int, attr->order_preservation_en);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_TX_QUEUE(cmd, queue) \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, queue)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_TX_QUEUE(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 32, 32, uint32_t, attr->fqid);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint8_t, attr->priority);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_SEC_ATTR(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, attr->ip_id);\
+ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, attr->major_rev);\
+ MC_RSP_OP(cmd, 0, 24, 8, uint8_t, attr->minor_rev);\
+ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->era);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint8_t, attr->deco_num);\
+ MC_RSP_OP(cmd, 1, 8, 8, uint8_t, attr->zuc_auth_acc_num);\
+ MC_RSP_OP(cmd, 1, 16, 8, uint8_t, attr->zuc_enc_acc_num);\
+ MC_RSP_OP(cmd, 1, 32, 8, uint8_t, attr->snow_f8_acc_num);\
+ MC_RSP_OP(cmd, 1, 40, 8, uint8_t, attr->snow_f9_acc_num);\
+ MC_RSP_OP(cmd, 1, 48, 8, uint8_t, attr->crc_acc_num);\
+ MC_RSP_OP(cmd, 2, 0, 8, uint8_t, attr->pk_acc_num);\
+ MC_RSP_OP(cmd, 2, 8, 8, uint8_t, attr->kasumi_acc_num);\
+ MC_RSP_OP(cmd, 2, 16, 8, uint8_t, attr->rng_acc_num);\
+ MC_RSP_OP(cmd, 2, 32, 8, uint8_t, attr->md_acc_num);\
+ MC_RSP_OP(cmd, 2, 40, 8, uint8_t, attr->arc4_acc_num);\
+ MC_RSP_OP(cmd, 2, 48, 8, uint8_t, attr->des_acc_num);\
+ MC_RSP_OP(cmd, 2, 56, 8, uint8_t, attr->aes_acc_num);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_SEC_COUNTERS(cmd, counters) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 64, uint64_t, counters->dequeued_requests);\
+ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, counters->ob_enc_requests);\
+ MC_RSP_OP(cmd, 2, 0, 64, uint64_t, counters->ib_dec_requests);\
+ MC_RSP_OP(cmd, 3, 0, 64, uint64_t, counters->ob_enc_bytes);\
+ MC_RSP_OP(cmd, 4, 0, 64, uint64_t, counters->ob_prot_bytes);\
+ MC_RSP_OP(cmd, 5, 0, 64, uint64_t, counters->ib_dec_bytes);\
+ MC_RSP_OP(cmd, 6, 0, 64, uint64_t, counters->ib_valid_bytes);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_API_VERSION(cmd, major, minor) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, major);\
+ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, minor);\
+} while (0)
+
+#endif /* _FSL_DPSECI_CMD_H */
diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/rte_bus_fslmc_version.map
index 5167262..c4b3408 100644
--- a/drivers/bus/fslmc/rte_bus_fslmc_version.map
+++ b/drivers/bus/fslmc/rte_bus_fslmc_version.map
@@ -35,6 +35,16 @@ DPDK_17.02 {
dpni_set_rx_tc_dist;
dpni_set_tx_confirmation_mode;
dpni_set_unicast_promisc;
+ dpseci_close;
+ dpseci_disable;
+ dpseci_enable;
+ dpseci_get_attributes;
+ dpseci_get_rx_queue;
+ dpseci_get_sec_counters;
+ dpseci_get_tx_queue;
+ dpseci_open;
+ dpseci_reset;
+ dpseci_set_rx_queue;
rte_fslmc_driver_register;
rte_fslmc_driver_unregister;
--
1.9.1
next prev parent reply other threads:[~2017-01-23 12:00 UTC|newest]
Thread overview: 549+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-04 18:16 [dpdk-dev] [PATCH 00/32] NXP DPAA2 PMD Hemant Agrawal
2016-12-04 18:16 ` [dpdk-dev] [PATCH 01/32] doc: add dpaa2 nic details Hemant Agrawal
2016-12-05 17:12 ` Mcnamara, John
2016-12-06 13:58 ` Hemant Agrawal
2016-12-06 19:48 ` Ferruh Yigit
2016-12-04 18:16 ` [dpdk-dev] [PATCH 02/32] drivers/common: introducing dpaa2 mc driver Hemant Agrawal
2016-12-06 19:48 ` Ferruh Yigit
2016-12-12 10:32 ` Hemant Agrawal
2016-12-15 6:04 ` Jerin Jacob
2016-12-19 5:27 ` Hemant Agrawal
2016-12-17 9:55 ` Jerin Jacob
2016-12-19 15:23 ` Hemant Agrawal
2016-12-04 18:16 ` [dpdk-dev] [PATCH 03/32] drivers/common/dpaa2: add mc dpni object support Hemant Agrawal
2016-12-04 18:16 ` [dpdk-dev] [PATCH 04/32] drivers/common/dpaa2: add mc dpio " Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 05/32] drivers/common/dpaa2: add mc dpbp " Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 06/32] drivers/common/dpaa2: add mc dpseci " Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 07/32] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 08/32] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2016-12-15 6:35 ` Jerin Jacob
2016-12-04 18:17 ` [dpdk-dev] [PATCH 09/32] lib/ether: add rte_device in rte_eth_dev Hemant Agrawal
2016-12-06 19:48 ` Ferruh Yigit
2016-12-07 6:41 ` Hemant Agrawal
2016-12-15 14:41 ` Ferruh Yigit
2016-12-19 5:30 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 10/32] net/dpaa2: introducing dpaa2 bus driver for fsl-mc bus Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-07 6:57 ` Hemant Agrawal
2016-12-07 10:13 ` Shreyansh Jain
2016-12-07 10:40 ` Thomas Monjalon
2016-12-07 12:21 ` David Marchand
2016-12-07 12:32 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 11/32] net/dpaa2: add dpaa2 vfio support Hemant Agrawal
2016-12-06 21:04 ` Thomas Monjalon
2016-12-07 7:00 ` Hemant Agrawal
2016-12-07 8:38 ` Thomas Monjalon
2016-12-07 10:04 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 12/32] net/dpaa2: vfio scan for net and sec device Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 13/32] net/dpaa2: add debug log macros Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:24 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 14/32] net/dpaa2: dpio object driver Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 15/32] net/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:25 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 16/32] net/dpaa2: dpio add support to check SOC type Hemant Agrawal
2016-12-15 6:34 ` Jerin Jacob
2016-12-15 7:01 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 17/32] net/dpaa2: dpbp based mempool hw offload driver Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-15 6:09 ` Jerin Jacob
2016-12-15 6:37 ` Shreyansh Jain
2016-12-15 6:54 ` Jerin Jacob
2016-12-04 18:17 ` [dpdk-dev] [PATCH 18/32] net/dpaa2: introducing dpaa2 pmd driver Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-06 21:08 ` Thomas Monjalon
2016-12-07 9:55 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 19/32] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:28 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 20/32] net/dpaa2: add queue configuration support Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:30 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 21/32] net/dpaa2: add rss flow distribution Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-04 18:17 ` [dpdk-dev] [PATCH 22/32] net/dpaa2: configure mac address at init Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-19 15:31 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 23/32] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 24/32] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 25/32] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 26/32] net/dpaa2: add mtu config support Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 27/32] net/dpaa2: add packet rx and tx support Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 28/32] net/dpaa2: add support for physical address usages Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-04 18:17 ` [dpdk-dev] [PATCH 29/32] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 30/32] net/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 31/32] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 32/32] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-06 19:48 ` [dpdk-dev] [PATCH 00/32] NXP DPAA2 PMD Ferruh Yigit
2016-12-07 9:53 ` Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 00/34] " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 01/34] lib/ether: add rte_device in rte_eth_dev Hemant Agrawal
2016-12-19 16:16 ` Stephen Hemminger
2016-12-20 4:41 ` Shreyansh Jain
2016-12-20 6:12 ` Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 02/34] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 03/34] doc: add dpaa2 nic details Hemant Agrawal
2016-12-21 18:45 ` Mcnamara, John
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 04/34] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 05/34] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 06/34] bus/fslmc: introduce mc object functions Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 07/34] bus/fslmc: add mc dpni object support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 08/34] bus/fslmc: add mc dpio " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 09/34] bus/fslmc: add mc dpbp " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 10/34] bus/fslmc: add mc dpseci " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 11/34] bus/fslmc: add vfio support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 12/34] bus/fslmc: scan for net and sec devices Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 13/34] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 14/34] bus/fslmc: add debug log message support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 15/34] drivers/common/dpaa2: dpio object driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 16/34] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 17/34] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 18/34] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 19/34] net/dpaa2: add queue configuration support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 20/34] net/dpaa2: add rss flow distribution Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 21/34] net/dpaa2: configure mac address at init Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 22/34] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 23/34] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 24/34] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 25/34] net/dpaa2: add mtu config support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 26/34] net/dpaa2: add packet rx and tx support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 27/34] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 28/34] net/dpaa2: link status update Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 29/34] net/dpaa2: basic stats support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 30/34] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 31/34] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 32/34] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 33/34] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 34/34] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 00/33] NXP DPAA2 PMD Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 01/33] mk/dpaa2: add the crc support to the machine type Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 02/33] eal/vfio: adding vfio utility functions in map file Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 03/33] doc: add dpaa2 nic details Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 04/33] drivers/common/dpaa2: adding qbman driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 05/33] bus/fslmc: introducing fsl-mc bus driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 06/33] bus/fslmc: introduce mc object functions Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 07/33] bus/fslmc: add mc dpni object support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 08/33] bus/fslmc: add mc dpio " Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 09/33] bus/fslmc: add mc dpbp " Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 10/33] bus/fslmc: add mc dpseci " Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 11/33] bus/fslmc: add vfio support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 12/33] bus/fslmc: scan for net and sec devices Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 13/33] net/dpaa2: introducing NXP dpaa2 pmd driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 14/33] bus/fslmc: add debug log message support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 15/33] drivers/common/dpaa2: dpio portal driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Shreyansh Jain
2016-12-29 7:08 ` Santosh Shukla
2017-01-03 8:22 ` Hemant Agrawal
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 18/33] net/dpaa2: adding eth ops to dpaa2 Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 19/33] net/dpaa2: add rss flow distribution Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 20/33] net/dpaa2: configure mac address at init Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 21/33] net/dpaa2: attach the buffer pool to dpni Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 22/33] net/dpaa2: add support for l3 and l4 checksum offload Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 23/33] net/dpaa2: add support for promiscuous mode Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 24/33] net/dpaa2: add mtu config support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 25/33] net/dpaa2: add packet rx and tx support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 26/33] net/dpaa2: rx packet parsing and packet type support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 27/33] net/dpaa2: link status update Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 28/33] net/dpaa2: basic stats support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 29/33] net/dpaa2: enable stashing for LS2088A devices Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 31/33] net/dpaa2: enabling the use of physical addresses Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 32/33] bus/fslmc: add support for dmamap to ARM SMMU Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Shreyansh Jain
2017-01-09 17:42 ` [dpdk-dev] [PATCH v3 00/33] NXP DPAA2 PMD Ferruh Yigit
2017-01-10 4:19 ` Shreyansh Jain
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 01/33] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 02/33] doc: add dpaa2 nic details Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 03/33] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 04/33] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 05/33] bus/fslmc: introduce mc object functions Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 06/33] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 07/33] bus/fslmc: add mc dpio " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 08/33] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 09/33] bus/fslmc: add mc dpseci " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 10/33] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 11/33] bus/fslmc: add vfio support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 12/33] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 13/33] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 14/33] bus/fslmc: add debug log message support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 15/33] drivers/common/dpaa2: dpio portal driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 18/33] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 19/33] net/dpaa2: add rss flow distribution Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 20/33] net/dpaa2: configure mac address at init Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 21/33] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 22/33] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 23/33] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 24/33] net/dpaa2: add mtu config support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 25/33] net/dpaa2: add packet rx and tx support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 26/33] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 27/33] net/dpaa2: link status update Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 28/33] net/dpaa2: basic stats support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 29/33] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 31/33] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 32/33] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 00/33] NXP DPAA2 PMD Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCH] cryptodev: decouple from PCI device Hemant Agrawal
2017-01-19 13:27 ` Hemant Agrawal
2017-01-20 12:28 ` De Lara Guarch, Pablo
2017-01-19 13:23 ` [dpdk-dev] [PATCH] mbuf: use pktmbuf helper to create the pool Hemant Agrawal
2017-01-19 13:27 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 01/33] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 02/33] doc: add dpaa2 nic details Hemant Agrawal
2017-01-19 17:08 ` Thomas Monjalon
2017-01-20 4:47 ` Hemant Agrawal
2017-01-19 17:34 ` Mcnamara, John
2017-01-20 4:46 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 03/33] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2017-01-19 19:07 ` Ferruh Yigit
2017-01-20 4:48 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 04/33] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-01-19 17:12 ` Thomas Monjalon
2017-01-19 19:08 ` Ferruh Yigit
2017-01-20 5:05 ` Shreyansh Jain
2017-01-20 11:39 ` Ferruh Yigit
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 05/33] bus/fslmc: introduce mc object functions Hemant Agrawal
2017-01-19 19:10 ` Ferruh Yigit
2017-01-20 4:52 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 06/33] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-01-19 17:14 ` Thomas Monjalon
2017-01-20 12:00 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 07/33] bus/fslmc: add mc dpio " Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 08/33] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 09/33] bus/fslmc: add mc dpseci " Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 10/33] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-01-19 17:16 ` Thomas Monjalon
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 11/33] bus/fslmc: add vfio support Hemant Agrawal
2017-01-19 17:23 ` Thomas Monjalon
2017-01-20 4:58 ` Hemant Agrawal
2017-01-19 19:12 ` Ferruh Yigit
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 12/33] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 13/33] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2017-01-19 19:15 ` Ferruh Yigit
2017-01-20 14:01 ` Shreyansh Jain
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 14/33] bus/fslmc: add debug log message support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 15/33] drivers/common/dpaa2: dpio portal driver Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 18/33] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 19/33] net/dpaa2: add rss flow distribution Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 20/33] net/dpaa2: configure mac address at init Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 21/33] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 22/33] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 23/33] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 24/33] net/dpaa2: add mtu config support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 25/33] net/dpaa2: add packet rx and tx support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 26/33] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 27/33] net/dpaa2: link status update Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 28/33] net/dpaa2: basic stats support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 29/33] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 31/33] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 32/33] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2017-01-19 13:24 ` [dpdk-dev] [PATCHv5 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 00/33] NXP DPAA2 PMD Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 01/33] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 02/33] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2017-01-23 17:30 ` Ferruh Yigit
2017-01-24 6:28 ` Shreyansh Jain
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 03/33] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 04/33] bus/fslmc: introduce mc object functions Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 05/33] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 06/33] bus/fslmc: add mc dpio " Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 07/33] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-01-23 11:59 ` Hemant Agrawal [this message]
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 09/33] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 10/33] bus/fslmc: add vfio support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 11/33] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 12/33] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2017-01-23 17:32 ` Ferruh Yigit
2017-01-24 8:38 ` Shreyansh Jain
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 13/33] doc: add dpaa2 nic details Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 14/33] bus/fslmc: add debug log message support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 15/33] drivers/common/dpaa2: dpio portal driver Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2017-01-23 17:34 ` Ferruh Yigit
2017-01-24 9:12 ` Shreyansh Jain
2017-01-24 10:49 ` Ferruh Yigit
2017-01-24 14:37 ` Hemant Agrawal
2017-01-24 16:35 ` Ferruh Yigit
2017-01-24 17:28 ` Thomas Monjalon
2017-01-25 12:23 ` Neil Horman
2017-01-25 13:34 ` Shreyansh Jain
2017-01-25 13:47 ` Jerin Jacob
2017-01-25 15:07 ` Neil Horman
2017-01-26 12:05 ` Shreyansh Jain
2017-01-25 15:29 ` Ferruh Yigit
2017-01-25 15:33 ` Ferruh Yigit
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 18/33] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-01-23 17:35 ` Ferruh Yigit
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 19/33] net/dpaa2: add rss flow distribution Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 20/33] net/dpaa2: configure mac address at init Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 21/33] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 22/33] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2017-01-23 17:35 ` Ferruh Yigit
2017-01-24 10:45 ` Hemant Agrawal
2017-01-24 10:51 ` Ferruh Yigit
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 23/33] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 24/33] net/dpaa2: add mtu config support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 25/33] net/dpaa2: add packet rx and tx support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 26/33] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 27/33] net/dpaa2: link status update Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 28/33] net/dpaa2: basic stats support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 29/33] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 31/33] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 32/33] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2017-01-23 17:56 ` [dpdk-dev] [PATCHv6 00/33] NXP DPAA2 PMD Ferruh Yigit
2017-01-26 11:55 ` Ferruh Yigit
2017-01-26 12:18 ` Hemant Agrawal
2017-01-26 18:02 ` Thomas Monjalon
2017-01-23 17:58 ` Ferruh Yigit
2017-01-24 11:25 ` Ferruh Yigit
2017-01-25 4:03 ` Hemant Agrawal
2017-02-16 0:38 ` [dpdk-dev] [PATCHv7 00/47] " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 01/47] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 02/47] mk: handle intra drivers dependencies for shared build Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 03/47] common/dpaa2: adding qbman driver Hemant Agrawal
2017-02-16 5:57 ` Shreyansh Jain
2017-02-21 13:42 ` [dpdk-dev] Hello Ferruh, Neil, Shreyansh Jain
2017-02-21 13:45 ` [dpdk-dev] [PATCHv7 03/47] common/dpaa2: adding qbman driver Shreyansh Jain
2017-02-21 14:39 ` [dpdk-dev] Hello Ferruh, Neil, Ferruh Yigit
2017-02-22 8:23 ` [dpdk-dev] [PATCHv7 03/47] common/dpaa2: adding qbman driver Shreyansh Jain
2017-02-24 9:58 ` Ferruh Yigit
2017-02-27 10:01 ` Shreyansh Jain
2017-02-27 15:35 ` Ferruh Yigit
2017-02-28 5:27 ` Shreyansh Jain
2017-03-01 11:00 ` Thomas Monjalon
2017-03-01 12:26 ` Hemant Agrawal
2017-02-22 12:41 ` [dpdk-dev] Hello Ferruh, Neil, Neil Horman
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 04/47] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 05/47] bus/fslmc: introduce MC object functions Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 06/47] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 07/47] bus/fslmc: add mc dpio " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 08/47] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 09/47] bus/fslmc: add mc dpseci " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 10/47] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 11/47] bus/fslmc: add vfio support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 12/47] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 13/47] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 14/47] doc: add DPAA2 NIC details Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 15/47] bus/fslmc: add debug log support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 16/47] net/dpaa2: " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 17/47] common/dpaa2: " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 18/47] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 19/47] bus/fslmc: dpio portal driver Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 20/47] pool/dpaa2: add DPAA2 hardware offloaded mempool Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 21/47] bus/fslmc: affine dpio to crypto threads Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 22/47] bus/fslmc: define queues for DPAA2 devices Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 23/47] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 24/47] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 25/47] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 26/47] bus/fslmc: define hardware annotation area size Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 27/47] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 28/47] bus/fslmc: introduce true and false macros Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 29/47] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 30/47] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 31/47] bus/fslmc: define VLAN header length Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 32/47] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 33/47] bus/fslmc: add packet FLE definitions Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 34/47] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 35/47] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 36/47] net/dpaa2: link status update Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 37/47] net/dpaa2: basic stats support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 38/47] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 39/47] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 40/47] bus/fslmc: add physical-virtual address translation helpers Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 41/47] pool/dpaa2: enable physical addressing for pool buffers Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 42/47] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 43/47] config: add configuration for toggling physical addressing Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 44/47] bus/fslmc: add support for DMA mapping for ARM SMMU Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 45/47] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 46/47] bus/fslmc: frame queue based dq storage alloc Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 47/47] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-02-16 13:22 ` [dpdk-dev] [PATCHv7 00/47] NXP DPAA2 PMD Neil Horman
2017-02-16 13:27 ` Bruce Richardson
2017-02-17 11:34 ` Ferruh Yigit
2017-02-17 12:13 ` Bruce Richardson
2017-02-17 12:17 ` Vincent JARDIN
2017-02-17 22:48 ` Neil Horman
2017-02-17 13:40 ` Thomas Monjalon
2017-02-17 12:29 ` Hemant Agrawal
2017-02-19 14:44 ` Neil Horman
2017-02-20 5:31 ` Hemant Agrawal
2017-02-20 12:20 ` Neil Horman
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 00/46] " Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 01/46] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 02/46] mk: handle intra drivers dependencies for shared build Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 03/46] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 04/46] bus/fslmc: add QBMAN driver to bus Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 05/46] bus/fslmc: introduce MC object functions Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 06/46] bus/fslmc: add mc dpio object support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 07/46] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 08/46] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 09/46] bus/fslmc: add vfio support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 10/46] bus/fslmc: scan for net and sec device Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 11/46] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 12/46] doc: add DPAA2 NIC details Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 13/46] bus/fslmc: add debug log support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 14/46] net/dpaa2: " Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 15/46] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 16/46] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 17/46] bus/fslmc: dpio portal driver Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 18/46] bus/fslmc: introduce support for hw mempool object Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 19/46] pool/dpaa2: add DPAA2 hardware offloaded mempool Hemant Agrawal
2017-03-07 16:24 ` Ferruh Yigit
2017-03-08 9:05 ` Olivier MATZ
2017-03-08 12:52 ` Hemant Agrawal
2017-03-08 15:39 ` Thomas Monjalon
2017-03-09 5:57 ` Hemant Agrawal
2017-03-14 6:42 ` Hemant Agrawal
2017-03-14 8:14 ` Olivier Matz
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 20/46] bus/fslmc: affine dpio to crypto threads Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 21/46] bus/fslmc: define queues for DPAA2 devices Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 22/46] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 23/46] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 24/46] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 25/46] bus/fslmc: define hardware annotation area size Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 26/46] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 27/46] bus/fslmc: introduce true and false macros Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 28/46] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 29/46] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 30/46] bus/fslmc: define VLAN header length Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 31/46] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 32/46] bus/fslmc: add packet FLE definitions Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 33/46] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 34/46] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 35/46] net/dpaa2: link status update Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 36/46] net/dpaa2: basic stats support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 37/46] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 38/46] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 39/46] bus/fslmc: add physical-virtual address translation helpers Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 40/46] pool/dpaa2: enable physical addressing for pool buffers Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 41/46] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 42/46] config: add configuration for toggling physical addressing Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 43/46] bus/fslmc: add support for DMA mapping for ARM SMMU Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 44/46] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 45/46] bus/fslmc: frame queue based dq storage alloc Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 46/46] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-03-07 16:13 ` [dpdk-dev] [PATCHv8 00/46] NXP DPAA2 PMD Thomas Monjalon
2017-03-07 17:00 ` Ferruh Yigit
2017-03-08 12:30 ` Shreyansh Jain
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 00/22] " Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-03-24 15:35 ` Ferruh Yigit
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 15/22] net/dpaa2: link status update Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-03-23 14:34 ` [dpdk-dev] [PATCH v9 00/22] NXP DPAA2 PMD Ferruh Yigit
2017-03-23 16:59 ` Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 " Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 15/22] net/dpaa2: link status update Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-03-24 14:58 ` [dpdk-dev] [PATCH v10 00/22] NXP DPAA2 PMD Ferruh Yigit
2017-03-24 15:19 ` Shreyansh Jain
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 " Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-04-09 12:23 ` Shreyansh Jain
2017-04-10 4:54 ` [dpdk-dev] [PATCH] doc: fix build error in DPAA2 PMD guide Shreyansh Jain
2017-04-10 7:46 ` Mcnamara, John
2017-04-11 14:58 ` Ferruh Yigit
2017-04-11 17:13 ` Shreyansh Jain
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 15/22] net/dpaa2: link status update Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 00/22] NXP DPAA2 PMD Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-04-12 15:28 ` Ferruh Yigit
2017-04-13 9:22 ` Shreyansh Jain
2017-04-13 9:18 ` Ferruh Yigit
2017-04-14 12:08 ` Ferruh Yigit
2017-04-14 16:50 ` Shreyansh Jain
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 15/22] net/dpaa2: link status update Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-04-12 13:52 ` [dpdk-dev] [PATCH v12 00/22] NXP DPAA2 PMD Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1485172803-17288-9-git-send-email-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=cristian.sovaiala@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=john.mcnamara@intel.com \
--cc=shreyansh.jain@nxp.com \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).