[dpdk-dev] [PATCH] ether: fix configure() to use a default for max_rx_pkt_len

[Andriy Berestovskyy <Andriy.Berestovskyy@cavium.com>]

At the moment rte_eth_dev_configure() behaves inconsistent:
 - for normal frames: out of range max_rx_pkt_len uses a default
 - for jumbo frames: out of range max_rx_pkt_len gives an error

This patch fixes this inconsistency by using a default value
for max_rx_pkt_len both for normal and jumbo frames.

Signed-off-by: Andriy Berestovskyy <Andriy.Berestovskyy@cavium.com>
---
 lib/librte_ether/rte_ethdev.c | 20 +++++---------------
 lib/librte_ether/rte_ethdev.h |  6 +++++-
 2 files changed, 10 insertions(+), 16 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index eb0a94a..f560051 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -856,21 +856,11 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 	 * length is supported by the configured device.
 	 */
 	if (dev_conf->rxmode.jumbo_frame == 1) {
-		if (dev_conf->rxmode.max_rx_pkt_len >
-		    dev_info.max_rx_pktlen) {
-			RTE_PMD_DEBUG_TRACE("ethdev port_id=%d max_rx_pkt_len %u"
-				" > max valid value %u\n",
-				port_id,
-				(unsigned)dev_conf->rxmode.max_rx_pkt_len,
-				(unsigned)dev_info.max_rx_pktlen);
-			return -EINVAL;
-		} else if (dev_conf->rxmode.max_rx_pkt_len < ETHER_MIN_LEN) {
-			RTE_PMD_DEBUG_TRACE("ethdev port_id=%d max_rx_pkt_len %u"
-				" < min valid value %u\n",
-				port_id,
-				(unsigned)dev_conf->rxmode.max_rx_pkt_len,
-				(unsigned)ETHER_MIN_LEN);
-			return -EINVAL;
+		if (dev_conf->rxmode.max_rx_pkt_len > dev_info.max_rx_pktlen ||
+			dev_conf->rxmode.max_rx_pkt_len < ETHER_MIN_LEN) {
+			/* Use maximum frame size the NIC supports */
+			dev->data->dev_conf.rxmode.max_rx_pkt_len =
+							dev_info.max_rx_pktlen;
 		}
 	} else {
 		if (dev_conf->rxmode.max_rx_pkt_len < ETHER_MIN_LEN ||
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 4be217c..2adfd77 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -349,7 +349,11 @@ enum rte_eth_tx_mq_mode {
 struct rte_eth_rxmode {
 	/** The multi-queue packet distribution mode to be used, e.g. RSS. */
 	enum rte_eth_rx_mq_mode mq_mode;
-	uint32_t max_rx_pkt_len;  /**< Only used if jumbo_frame enabled. */
+	/**
+	 * Desired maximum RX frame size. Too short or too long size will be
+	 * substituted by a default value.
+	 */
+	uint32_t max_rx_pkt_len;
 	uint16_t split_hdr_size;  /**< hdr buf size (header_split enabled).*/
 	__extension__
 	uint16_t header_split : 1, /**< Header Split enable. */
-- 
2.7.4