[dpdk-dev] [PATCH v3 59/61] net/qede/base: add support for arfs mode

[Rasesh Mody <rasesh.mody@cavium.com>]

From: Harish Patil <harish.patil@qlogic.com>

Add base driver APIs to enable accelerated RFS[aRFS] mode and ramrod
to configure rfs and ntuple filter.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
---
 drivers/net/qede/base/ecore_cxt.c           |   49 +++++++++++-----
 drivers/net/qede/base/ecore_init_fw_funcs.c |   31 ++++++++++
 drivers/net/qede/base/ecore_init_fw_funcs.h |   11 ++++
 drivers/net/qede/base/ecore_l2.c            |   84 +++++++++++++++++++++++++++
 drivers/net/qede/base/ecore_l2.h            |   27 +++++++++
 drivers/net/qede/base/ecore_l2_api.h        |   22 +++++++
 drivers/net/qede/base/ecore_proto_if.h      |    6 ++
 drivers/net/qede/base/ecore_spq.h           |    1 +
 8 files changed, 218 insertions(+), 13 deletions(-)

diff --git a/drivers/net/qede/base/ecore_cxt.c b/drivers/net/qede/base/ecore_cxt.c
index 1a2a701..80ad102 100644
--- a/drivers/net/qede/base/ecore_cxt.c
+++ b/drivers/net/qede/base/ecore_cxt.c
@@ -192,9 +192,6 @@ struct ecore_cxt_mngr {
 	 */
 	u32 vf_count;
 
-	/* total number of SRQ's for this hwfn */
-	u32				srq_count;
-
 	/* Acquired CIDs */
 	struct ecore_cid_acquired_map acquired[MAX_CONN_TYPES];
 	/* TBD - do we want this allocated to reserve space? */
@@ -213,10 +210,29 @@ struct ecore_cxt_mngr {
 	u32 t2_num_pages;
 	u64 first_free;
 	u64 last_free;
+
+	/* The infrastructure originally was very generic and context/task
+	 * oriented - per connection-type we would set how many of those
+	 * are needed, and later when determining how much memory we're
+	 * needing for a given block we'd iterate over all the relevant
+	 * connection-types.
+	 * But since then we've had some additional resources, some of which
+	 * require memory which is indepent of the general context/task
+	 * scheme. We add those here explicitly per-feature.
+	 */
+
+	/* total number of SRQ's for this hwfn */
+	u32				srq_count;
+
+	/* Maximal number of L2 steering filters */
+	u32				arfs_count;
+
+	/* TODO - VF arfs filters ? */
 };
 
 /* check if resources/configuration is required according to protocol type */
-static OSAL_INLINE bool src_proto(enum protocol_type type)
+static OSAL_INLINE bool src_proto(struct ecore_hwfn *p_hwfn,
+				  enum protocol_type type)
 {
 	return type == PROTOCOLID_TOE;
 }
@@ -254,18 +270,22 @@ struct ecore_src_iids {
 	u32 per_vf_cids;
 };
 
-static OSAL_INLINE void ecore_cxt_src_iids(struct ecore_cxt_mngr *p_mngr,
+static OSAL_INLINE void ecore_cxt_src_iids(struct ecore_hwfn *p_hwfn,
+					   struct ecore_cxt_mngr *p_mngr,
 					   struct ecore_src_iids *iids)
 {
 	u32 i;
 
 	for (i = 0; i < MAX_CONN_TYPES; i++) {
-		if (!src_proto(i))
+		if (!src_proto(p_hwfn, i))
 			continue;
 
 		iids->pf_cids += p_mngr->conn_cfg[i].cid_count;
 		iids->per_vf_cids += p_mngr->conn_cfg[i].cids_per_vf;
 	}
+
+	/* Add L2 filtering filters in addition */
+	iids->pf_cids += p_mngr->arfs_count;
 }
 
 /* counts the iids for the Timers block configuration */
@@ -686,7 +706,7 @@ enum _ecore_status_t ecore_cxt_cfg_ilt_compute(struct ecore_hwfn *p_hwfn)
 
 	/* SRC */
 	p_cli = &p_mngr->clients[ILT_CLI_SRC];
-	ecore_cxt_src_iids(p_mngr, &src_iids);
+	ecore_cxt_src_iids(p_hwfn, p_mngr, &src_iids);
 
 	/* Both the PF and VFs searcher connections are stored in the per PF
 	 * database. Thus sum the PF searcher cids and all the VFs searcher
@@ -800,7 +820,7 @@ static enum _ecore_status_t ecore_cxt_src_t2_alloc(struct ecore_hwfn *p_hwfn)
 	if (!p_src->active)
 		return ECORE_SUCCESS;
 
-	ecore_cxt_src_iids(p_mngr, &src_iids);
+	ecore_cxt_src_iids(p_hwfn, p_mngr, &src_iids);
 	conn_num = src_iids.pf_cids + src_iids.per_vf_cids * p_mngr->vf_count;
 	total_size = conn_num * sizeof(struct src_ent);
 
@@ -1619,7 +1639,7 @@ static void ecore_src_init_pf(struct ecore_hwfn *p_hwfn)
 	struct ecore_src_iids src_iids;
 
 	OSAL_MEM_ZERO(&src_iids, sizeof(src_iids));
-	ecore_cxt_src_iids(p_mngr, &src_iids);
+	ecore_cxt_src_iids(p_hwfn, p_mngr, &src_iids);
 	conn_num = src_iids.pf_cids + src_iids.per_vf_cids * p_mngr->vf_count;
 	if (!conn_num)
 		return;
@@ -1635,6 +1655,9 @@ static void ecore_src_init_pf(struct ecore_hwfn *p_hwfn)
 			 p_hwfn->p_cxt_mngr->first_free);
 	STORE_RT_REG_AGG(p_hwfn, SRC_REG_LASTFREE_RT_OFFSET,
 			 p_hwfn->p_cxt_mngr->last_free);
+	DP_VERBOSE(p_hwfn, ECORE_MSG_ILT,
+		   "Configured SEARCHER for 0x%08x connections\n",
+		   conn_num);
 }
 
 /* Timers PF */
@@ -1978,10 +2001,10 @@ enum _ecore_status_t ecore_cxt_set_pf_params(struct ecore_hwfn *p_hwfn)
 			 * As of now, allocates 16 * 2 per-VF [to retain regular
 			 * functionality].
 			 */
-			ecore_cxt_set_proto_cid_count(p_hwfn,
-				PROTOCOLID_ETH,
-				p_params->num_cons, 32);
-
+			ecore_cxt_set_proto_cid_count(p_hwfn, PROTOCOLID_ETH,
+						      p_params->num_cons, 32);
+			p_hwfn->p_cxt_mngr->arfs_count =
+						p_params->num_arfs_filters;
 			break;
 		}
 	default:
diff --git a/drivers/net/qede/base/ecore_init_fw_funcs.c b/drivers/net/qede/base/ecore_init_fw_funcs.c
index af0deaa..004ab35 100644
--- a/drivers/net/qede/base/ecore_init_fw_funcs.c
+++ b/drivers/net/qede/base/ecore_init_fw_funcs.c
@@ -1497,6 +1497,37 @@ void ecore_set_geneve_enable(struct ecore_hwfn *p_hwfn,
 #define RAM_LINE_SIZE sizeof(u64)
 #define REG_SIZE sizeof(u32)
 
+void ecore_set_rfs_mode_disable(struct ecore_hwfn *p_hwfn,
+	struct ecore_ptt *p_ptt,
+	u16 pf_id)
+{
+	union gft_cam_line_union cam_line;
+	struct gft_ram_line ram_line;
+	u32 i, *ram_line_ptr;
+
+	ram_line_ptr = (u32 *)&ram_line;
+
+	/* Stop using gft logic, disable gft search */
+	ecore_wr(p_hwfn, p_ptt, PRS_REG_SEARCH_GFT, 0);
+	ecore_wr(p_hwfn, p_ptt, PRS_REG_CM_HDR_GFT, 0x0);
+
+	/* Clean ram & cam for next rfs/gft session*/
+
+	/* Zero camline */
+	OSAL_MEMSET(&cam_line, 0, sizeof(cam_line));
+	ecore_wr(p_hwfn, p_ptt, PRS_REG_GFT_CAM + CAM_LINE_SIZE * pf_id,
+					cam_line.cam_line_mapped.camline);
+
+	/* Zero ramline */
+	OSAL_MEMSET(&ram_line, 0, sizeof(ram_line));
+
+	/* Each iteration write to reg */
+	for (i = 0; i < RAM_LINE_SIZE / REG_SIZE; i++)
+		ecore_wr(p_hwfn, p_ptt, PRS_REG_GFT_PROFILE_MASK_RAM +
+			 RAM_LINE_SIZE * pf_id +
+			 i * REG_SIZE, *(ram_line_ptr + i));
+}
+
 
 void ecore_set_gft_event_id_cm_hdr(struct ecore_hwfn *p_hwfn,
 				   struct ecore_ptt *p_ptt)
diff --git a/drivers/net/qede/base/ecore_init_fw_funcs.h b/drivers/net/qede/base/ecore_init_fw_funcs.h
index 2d1ab7c..4da3fc2 100644
--- a/drivers/net/qede/base/ecore_init_fw_funcs.h
+++ b/drivers/net/qede/base/ecore_init_fw_funcs.h
@@ -351,6 +351,17 @@ void ecore_set_gft_event_id_cm_hdr(struct ecore_hwfn *p_hwfn,
 				   struct ecore_ptt *p_ptt);
 
 /**
+ * @brief ecore_set_rfs_mode_disable - Disable and configure HW for RFS
+ *
+ * @param p_hwfn -   HW device data
+ * @param p_ptt -   ptt window used for writing the registers.
+ * @param pf_id - pf on which to disable RFS.
+ */
+void ecore_set_rfs_mode_disable(struct ecore_hwfn *p_hwfn,
+				struct ecore_ptt *p_ptt,
+				u16 pf_id);
+
+/**
 * @brief ecore_set_rfs_mode_enable - enable and configure HW for RFS
 *
 * @param p_ptt	- ptt window used for writing the registers.
diff --git a/drivers/net/qede/base/ecore_l2.c b/drivers/net/qede/base/ecore_l2.c
index c4af895..4ab8fd5 100644
--- a/drivers/net/qede/base/ecore_l2.c
+++ b/drivers/net/qede/base/ecore_l2.c
@@ -2018,3 +2018,87 @@ void ecore_reset_vport_stats(struct ecore_dev *p_dev)
 	else
 		_ecore_get_vport_stats(p_dev, p_dev->reset_stats);
 }
+
+void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn,
+			       struct ecore_ptt *p_ptt,
+			       struct ecore_arfs_config_params *p_cfg_params)
+{
+	if (p_cfg_params->arfs_enable) {
+		ecore_set_rfs_mode_enable(p_hwfn, p_ptt, p_hwfn->rel_pf_id,
+					  p_cfg_params->tcp,
+					  p_cfg_params->udp,
+					  p_cfg_params->ipv4,
+					  p_cfg_params->ipv6);
+		DP_VERBOSE(p_hwfn, ECORE_MSG_SP,
+			   "tcp = %s, udp = %s, ipv4 = %s, ipv6 =%s\n",
+			   p_cfg_params->tcp ? "Enable" : "Disable",
+			   p_cfg_params->udp ? "Enable" : "Disable",
+			   p_cfg_params->ipv4 ? "Enable" : "Disable",
+			   p_cfg_params->ipv6 ? "Enable" : "Disable");
+	} else {
+		ecore_set_rfs_mode_disable(p_hwfn, p_ptt, p_hwfn->rel_pf_id);
+	}
+	DP_VERBOSE(p_hwfn, ECORE_MSG_SP, "Configured ARFS mode : %s\n",
+		   p_cfg_params->arfs_enable ? "Enable" : "Disable");
+}
+
+enum _ecore_status_t
+ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn,
+				  struct ecore_ptt *p_ptt,
+				  struct ecore_spq_comp_cb *p_cb,
+				  dma_addr_t p_addr, u16 length,
+				  u16 qid, u8 vport_id,
+				  bool b_is_add)
+{
+	struct rx_update_gft_filter_data *p_ramrod = OSAL_NULL;
+	struct ecore_spq_entry *p_ent = OSAL_NULL;
+	struct ecore_sp_init_data init_data;
+	u16 abs_rx_q_id = 0;
+	u8 abs_vport_id = 0;
+	enum _ecore_status_t rc = ECORE_NOTIMPL;
+
+	rc = ecore_fw_vport(p_hwfn, vport_id, &abs_vport_id);
+	if (rc != ECORE_SUCCESS)
+		return rc;
+
+	rc = ecore_fw_l2_queue(p_hwfn, qid, &abs_rx_q_id);
+	if (rc != ECORE_SUCCESS)
+		return rc;
+
+	/* Get SPQ entry */
+	OSAL_MEMSET(&init_data, 0, sizeof(init_data));
+	init_data.cid = ecore_spq_get_cid(p_hwfn);
+
+	init_data.opaque_fid = p_hwfn->hw_info.opaque_fid;
+
+	if (p_cb) {
+		init_data.comp_mode = ECORE_SPQ_MODE_CB;
+		init_data.p_comp_data = p_cb;
+	} else {
+		init_data.comp_mode = ECORE_SPQ_MODE_EBLOCK;
+	}
+
+	rc = ecore_sp_init_request(p_hwfn, &p_ent,
+				   ETH_RAMROD_GFT_UPDATE_FILTER,
+				   PROTOCOLID_ETH, &init_data);
+	if (rc != ECORE_SUCCESS)
+		return rc;
+
+	p_ramrod = &p_ent->ramrod.rx_update_gft;
+
+	DMA_REGPAIR_LE(p_ramrod->pkt_hdr_addr, p_addr);
+	p_ramrod->pkt_hdr_length = OSAL_CPU_TO_LE16(length);
+	p_ramrod->rx_qid_or_action_icid = OSAL_CPU_TO_LE16(abs_rx_q_id);
+	p_ramrod->vport_id = abs_vport_id;
+	p_ramrod->filter_type = RFS_FILTER_TYPE;
+	p_ramrod->filter_action = b_is_add ? GFT_ADD_FILTER
+					   : GFT_DELETE_FILTER;
+
+	DP_VERBOSE(p_hwfn, ECORE_MSG_SP,
+		   "V[%0x], Q[%04x] - %s filter from 0x%lx [length %04xb]\n",
+		   abs_vport_id, abs_rx_q_id,
+		   b_is_add ? "Adding" : "Removing",
+		   (unsigned long)p_addr, length);
+
+	return ecore_spq_post(p_hwfn, p_ent, OSAL_NULL);
+}
diff --git a/drivers/net/qede/base/ecore_l2.h b/drivers/net/qede/base/ecore_l2.h
index 3f86eac..7fe4cbc 100644
--- a/drivers/net/qede/base/ecore_l2.h
+++ b/drivers/net/qede/base/ecore_l2.h
@@ -129,4 +129,31 @@ ecore_eth_txq_start_ramrod(struct ecore_hwfn *p_hwfn,
 
 u8 ecore_mcast_bin_from_mac(u8 *mac);
 
+/**
+ * @brief - ecore_configure_rfs_ntuple_filter
+ *
+ * This ramrod should be used to add or remove arfs hw filter
+ *
+ * @params p_hwfn
+ * @params p_ptt
+ * @params p_cb		Used for ECORE_SPQ_MODE_CB,where client would initialize
+			it with cookie and callback function address, if not
+			using this mode then client must pass NULL.
+ * @params p_addr	p_addr is an actual packet header that needs to be
+ *			filter. It has to mapped with IO to read prior to
+ *			calling this, [contains 4 tuples- src ip, dest ip,
+ *			src port, dest port].
+ * @params length	length of p_addr header up to past the transport header.
+ * @params qid		receive packet will be directed to this queue.
+ * @params vport_id
+ * @params b_is_add	flag to add or remove filter.
+ *
+ */
+enum _ecore_status_t
+ecore_configure_rfs_ntuple_filter(struct ecore_hwfn *p_hwfn,
+				  struct ecore_ptt *p_ptt,
+				  struct ecore_spq_comp_cb *p_cb,
+				  dma_addr_t p_addr, u16 length,
+				  u16 qid, u8 vport_id,
+				  bool b_is_add);
 #endif
diff --git a/drivers/net/qede/base/ecore_l2_api.h b/drivers/net/qede/base/ecore_l2_api.h
index 5a7db76..d09f3c4 100644
--- a/drivers/net/qede/base/ecore_l2_api.h
+++ b/drivers/net/qede/base/ecore_l2_api.h
@@ -141,6 +141,14 @@ struct ecore_filter_accept_flags {
 #define ECORE_ACCEPT_BCAST		0x20
 };
 
+struct ecore_arfs_config_params {
+	bool tcp;
+	bool udp;
+	bool ipv4;
+	bool ipv6;
+	bool arfs_enable;	/* Enable or disable arfs mode */
+};
+
 /* Add / remove / move / remove-all unicast MAC-VLAN filters.
  * FW will assert in the following cases, so driver should take care...:
  * 1. Adding a filter to a full table.
@@ -414,4 +422,18 @@ void ecore_get_vport_stats(struct ecore_dev *p_dev,
 
 void ecore_reset_vport_stats(struct ecore_dev *p_dev);
 
+/**
+ *@brief ecore_arfs_mode_configure -
+ *
+ *Enable or disable rfs mode. It must accept atleast one of tcp or udp true
+ *and atleast one of ipv4 or ipv6 true to enable rfs mode.
+ *
+ *@param p_hwfn
+ *@param p_ptt
+ *@param p_cfg_params		arfs mode configuration parameters.
+ *
+ */
+void ecore_arfs_mode_configure(struct ecore_hwfn *p_hwfn,
+			       struct ecore_ptt *p_ptt,
+			       struct ecore_arfs_config_params *p_cfg_params);
 #endif
diff --git a/drivers/net/qede/base/ecore_proto_if.h b/drivers/net/qede/base/ecore_proto_if.h
index 0ac153f..226e3d2 100644
--- a/drivers/net/qede/base/ecore_proto_if.h
+++ b/drivers/net/qede/base/ecore_proto_if.h
@@ -21,6 +21,12 @@ struct ecore_eth_pf_params {
 	 * to update_pf_params routine invoked before slowpath start
 	 */
 	u16	num_cons;
+
+	/* To enable arfs, previous to HW-init a positive number needs to be
+	 * set [as filters require allocated searcher ILT memory].
+	 * This will set the maximal number of configured steering-filters.
+	 */
+	u32	num_arfs_filters;
 };
 
 /* Most of the the parameters below are described in the FW iSCSI / TCP HSI */
diff --git a/drivers/net/qede/base/ecore_spq.h b/drivers/net/qede/base/ecore_spq.h
index e2468b7..e530f83 100644
--- a/drivers/net/qede/base/ecore_spq.h
+++ b/drivers/net/qede/base/ecore_spq.h
@@ -26,6 +26,7 @@ union ramrod_data {
 	struct tx_queue_stop_ramrod_data		tx_queue_stop;
 	struct vport_start_ramrod_data			vport_start;
 	struct vport_stop_ramrod_data			vport_stop;
+	struct rx_update_gft_filter_data		rx_update_gft;
 	struct vport_update_ramrod_data			vport_update;
 	struct core_rx_start_ramrod_data		core_rx_queue_start;
 	struct core_rx_stop_ramrod_data			core_rx_queue_stop;
-- 
1.7.10.3