[dpdk-dev] [PATCH v3 36/46] net/liquidio: add API to validate VF MTU

[Shijith Thotton <shijith.thotton@caviumnetworks.com>]

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
---
 drivers/net/liquidio/lio_ethdev.c | 46 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/net/liquidio/lio_ethdev.c b/drivers/net/liquidio/lio_ethdev.c
index e2040b9..560f195 100644
--- a/drivers/net/liquidio/lio_ethdev.c
+++ b/drivers/net/liquidio/lio_ethdev.c
@@ -152,6 +152,33 @@
 }
 
 static int
+lio_dev_validate_vf_mtu(struct rte_eth_dev *eth_dev, uint16_t new_mtu)
+{
+	struct lio_device *lio_dev = LIO_DEV(eth_dev);
+
+	PMD_INIT_FUNC_TRACE();
+
+	if (!lio_dev->intf_open) {
+		lio_dev_err(lio_dev, "Port %d down, can't check MTU\n",
+			    lio_dev->port_id);
+		return -EINVAL;
+	}
+
+	/* Limit the MTU to make sure the ethernet packets are between
+	 * ETHER_MIN_MTU bytes and PF's MTU
+	 */
+	if ((new_mtu < ETHER_MIN_MTU) ||
+			(new_mtu > lio_dev->linfo.link.s.mtu)) {
+		lio_dev_err(lio_dev, "Invalid MTU: %d\n", new_mtu);
+		lio_dev_err(lio_dev, "Valid range %d and %d\n",
+			    ETHER_MIN_MTU, lio_dev->linfo.link.s.mtu);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int
 lio_dev_rss_reta_update(struct rte_eth_dev *eth_dev,
 			struct rte_eth_rss_reta_entry64 *reta_conf,
 			uint16_t reta_size)
@@ -824,7 +851,9 @@
 static int
 lio_dev_start(struct rte_eth_dev *eth_dev)
 {
+	uint16_t mtu = eth_dev->data->dev_conf.rxmode.max_rx_pkt_len;
 	struct lio_device *lio_dev = LIO_DEV(eth_dev);
+	uint16_t timeout = LIO_MAX_CMD_TIMEOUT;
 	int ret = 0;
 
 	lio_dev_info(lio_dev, "Starting port %d\n", eth_dev->data->port_id);
@@ -852,8 +881,25 @@
 		goto dev_lsc_handle_error;
 	}
 
+	while ((lio_dev->linfo.link.link_status64 == 0) && (--timeout))
+		rte_delay_ms(1);
+
+	if (lio_dev->linfo.link.link_status64 == 0) {
+		ret = -1;
+		goto dev_mtu_check_error;
+	}
+
+	if (lio_dev->linfo.link.s.mtu != mtu) {
+		ret = lio_dev_validate_vf_mtu(eth_dev, mtu);
+		if (ret)
+			goto dev_mtu_check_error;
+	}
+
 	return 0;
 
+dev_mtu_check_error:
+	rte_eal_alarm_cancel(lio_sync_link_state_check, eth_dev);
+
 dev_lsc_handle_error:
 	lio_dev->intf_open = 0;
 	lio_send_rx_ctrl_cmd(eth_dev, 0);
-- 
1.8.3.1