DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting
@ 2017-03-27 20:21 Remy Horton
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library Remy Horton
                   ` (7 more replies)
  0 siblings, 8 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-27 20:21 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patchset consists of three libraries: A Metrics library for
distributing device information, a library that calculates bit-rate
statistics, and a library that calculates latency statistics. The
latter two libraries make use of the first library.

Metrics Library
---------------
The Metrics library implements a mechanism by which producers can
publish numeric information for later querying by consumers.
In practice producers will typically be other libraries or
primary processes, whereas consumers will typically be applications.

Metrics themselves are statistics that are not generated by PMDs.
Metric information is populated using a push model, where producers
update the values contained within the metric library by calling an
update function on the relevant metrics. Consumers receive metric
information by querying the central metric data, which is held
in shared memory so it can also be accessed by secondary processes.

For each metric, a separate value is maintained for each port id,
and when publishing metric values the producers need to specify
which port is being updated. In addition there is a special id
RTE_METRICS_GLOBAL that is intended for global statistics that are
not associated with any individual device. Since the metrics
library is self-contained, the only restriction on port numbers is
that they are less than RTE_MAX_ETHPORTS - there is no requirement
for the ports to actually exist.

Metrics must first be registered, which is the way producers declare
the names of the metrics they will be publishing. Registration can
either be done individually, or as a group as a metric set. The
intention is for all metrics in a set to be updated in one go,
although it is also possible for metrics within a set to be updated
individually. It is up to the producers to update metrics as required.

Bit-rate statistics library
---------------------------
The bit-rate library calculates the mean, the exponentially-weighted
moving average, and peak bit-rates for each active port (i.e. network
device). These statistics are then reported via the metrics library
using the following names: mean_bits_in, mean_bits_out, ewma_bits_in,
ewma_bits_out, peak_bits_in, and peak_bits_out. The sampling window 
used for calculation is decided by the application requiring the statistics.

Latency statistics library
--------------------------
The latency statistics library calculates the port-to-port latency of
packet processing by a DPDK application, reporting the minimum, average,
and maximum nano-seconds that packet processing takes, as well as the
jitter in processing delay. These statistics are then reported via the
metrics library using the following names: min_latency_ns, avg_latency_ns,
mac_latency_ns, and jitter_ns.

This is dependent on http://dpdk.org/dev/patchwork/patch/21607/ for the
timestamp MBUF field.

For more details on the metrics library and the Bit-rate and Latency
components see the Programmer's Guide updates in the patchset.
--

v12 changes:
* Rebased to latest master
* Misspellings in MAINTAINERS corrected
* Removed MBUF modifications (use Olivier's MBUF rework)

v11 changes:
* Rebased
* .map references to 17.02 changed to 17.05
* Release ntoes moved to release_17_05.rst
* Bit-rate library now also gives unfiltered average

v10 changes:
* Rebased
* Relocated some config-related directives.
* Removed incorrect capitalisations in API docs.
* Formatting & detail corrections in release notes.
* Moved around struct member descriptions.
* Rewritten rte_metrics.h file description.
* Rewritten description of RTE_METRICS_GLOBAL.
* Used 'producers' and 'consumers' as terms.
* Removed markup (bold text) in Doxygen tags.
* Added programming guide section.

v9 changes:
* Updated .map files to reflect function changes in v8
* Fixed rte_malloc() of zero bytes in proc_info when no metrics exist
* Fixed rte_metrics_init not being called explicitly in testpmd

v8 changes:
* Release notes correction
* Updated copyright years
* rte_metric_init() takes socket id & must be explicitly called
* rte_metrics_reg_metric renamed to rte_metrics_reg_name()
* rte_metrics_update_metric() renamed to rte_metrics_update_value()
* Doxygen updates
* Changed malloc()/free() to rte_malloc()/rte_free()
* Removed redundant memset()
* rte_stats_bitrates_s renamed to rte_stats_bitrates_s
* Split mbuf change to own patch for visibility
* CYCLES_PER_NS now a static inline function
* latency: "hidden" pthread creation now has polling API instead.
* Struct declarations and variable definitions cleaned up
* Double initialization of the latency library now returns -EEXIST
* MAINTAINERS entry for layenctstats in correct section

v7 changes:
* RTE_METRICS_NONPORT renamed to RTE_METRICS_GLOBAL
* Multiple changes to rte_metrics.h doxygen documentation
* Split apart latency patch into lib, test-pmd, & proc_info parts
* Reordered patches by functionality
* Insufficent capacity return value changed from -ERANGE to actual size
* Cache alignment in bitrate library
* Tightened up const usage to avoid STATIC_CONST_CHAR_ARRAY warning
* Reshma reinstated as author for (now split) latency patch
* Rebase to master

v6 changes:
* Metrics display now has "Non port specific" rather than "port -1"
* Fixed sign issue in EWMA delta calculation
* Rebased to master

v5 changes:
* Updated Shared Library Versions in release notes
* Merged in Reshma's latencystats library

v4 changes:
* References to 16.11 changed to 17.02
* Fetching of non-port values was broken
* Added sanity checks to value fetching
* rte_stat_value renamed to rte_metric_value
* Corrected doxygen descriptions
* Added MAINTAINERS entries
* Added #ifdef directives to bitrate code in test-pmd

v3 changes:
* Marked rte_stats_bitrate_s as internal
* Minor integer roundoff correction
* Coding style corrections
* Removed spurious object allocation
* Changes to rte_metrics.[ch] moved from Patch 2/3 to 1/3.
* Reintroduced non-port values (RTE_METRICS_NONPORT)
* Added spinlocks to metric library
* Removed spurious test registration/update
* Added release notes entries

v2 changes:
* Uses a new metrics library rather than being part of ethdev


Harry van Haaren (2):
  lib: added new library for latency stats
  app/test-pmd: add latency statistics calculation

Remy Horton (3):
  lib: add information metrics library
  lib: add bitrate statistics library
  app/test-pmd: add bitrate statistics calculation

Reshma Pattan (1):
  app/proc_info: add metrics displaying

 MAINTAINERS                                        |  12 +
 app/proc_info/main.c                               |  79 ++++-
 app/test-pmd/parameters.c                          |  20 +-
 app/test-pmd/testpmd.c                             |  78 ++++-
 app/test-pmd/testpmd.h                             |   6 +-
 config/common_base                                 |  15 +
 doc/api/doxy-api-index.md                          |   3 +
 doc/api/doxy-api.conf                              |   3 +
 doc/guides/prog_guide/index.rst                    |   1 +
 doc/guides/prog_guide/metrics_lib.rst              | 299 +++++++++++++++++
 doc/guides/rel_notes/release_17_02.rst             |   3 +
 doc/guides/rel_notes/release_17_05.rst             |  18 +
 lib/Makefile                                       |   3 +
 lib/librte_bitratestats/Makefile                   |  53 +++
 lib/librte_bitratestats/rte_bitrate.c              | 141 ++++++++
 lib/librte_bitratestats/rte_bitrate.h              |  80 +++++
 .../rte_bitratestats_version.map                   |   9 +
 lib/librte_latencystats/Makefile                   |  56 ++++
 lib/librte_latencystats/rte_latencystats.c         | 366 +++++++++++++++++++++
 lib/librte_latencystats/rte_latencystats.h         | 154 +++++++++
 .../rte_latencystats_version.map                   |  11 +
 lib/librte_metrics/Makefile                        |  51 +++
 lib/librte_metrics/rte_metrics.c                   | 299 +++++++++++++++++
 lib/librte_metrics/rte_metrics.h                   | 240 ++++++++++++++
 lib/librte_metrics/rte_metrics_version.map         |  13 +
 mk/rte.app.mk                                      |   3 +
 26 files changed, 2012 insertions(+), 4 deletions(-)
 create mode 100644 doc/guides/prog_guide/metrics_lib.rst
 create mode 100644 lib/librte_bitratestats/Makefile
 create mode 100644 lib/librte_bitratestats/rte_bitrate.c
 create mode 100644 lib/librte_bitratestats/rte_bitrate.h
 create mode 100644 lib/librte_bitratestats/rte_bitratestats_version.map
 create mode 100644 lib/librte_latencystats/Makefile
 create mode 100644 lib/librte_latencystats/rte_latencystats.c
 create mode 100644 lib/librte_latencystats/rte_latencystats.h
 create mode 100644 lib/librte_latencystats/rte_latencystats_version.map
 create mode 100644 lib/librte_metrics/Makefile
 create mode 100644 lib/librte_metrics/rte_metrics.c
 create mode 100644 lib/librte_metrics/rte_metrics.h
 create mode 100644 lib/librte_metrics/rte_metrics_version.map

-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
@ 2017-03-27 20:21 ` Remy Horton
  2017-03-28 14:14   ` Pattan, Reshma
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 2/6] app/proc_info: add metrics displaying Remy Horton
                   ` (6 subsequent siblings)
  7 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-03-27 20:21 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.

Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 MAINTAINERS                                |   4 +
 config/common_base                         |   5 +
 doc/api/doxy-api-index.md                  |   1 +
 doc/api/doxy-api.conf                      |   1 +
 doc/guides/prog_guide/index.rst            |   1 +
 doc/guides/prog_guide/metrics_lib.rst      | 180 +++++++++++++++++
 doc/guides/rel_notes/release_17_02.rst     |   1 +
 doc/guides/rel_notes/release_17_05.rst     |   8 +
 lib/Makefile                               |   1 +
 lib/librte_metrics/Makefile                |  51 +++++
 lib/librte_metrics/rte_metrics.c           | 299 +++++++++++++++++++++++++++++
 lib/librte_metrics/rte_metrics.h           | 240 +++++++++++++++++++++++
 lib/librte_metrics/rte_metrics_version.map |  13 ++
 mk/rte.app.mk                              |   2 +
 14 files changed, 807 insertions(+)
 create mode 100644 doc/guides/prog_guide/metrics_lib.rst
 create mode 100644 lib/librte_metrics/Makefile
 create mode 100644 lib/librte_metrics/rte_metrics.c
 create mode 100644 lib/librte_metrics/rte_metrics.h
 create mode 100644 lib/librte_metrics/rte_metrics_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 0c78b58..d58a1a7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -626,6 +626,10 @@ F: lib/librte_jobstats/
 F: examples/l2fwd-jobstats/
 F: doc/guides/sample_app_ug/l2_forward_job_stats.rst
 
+Metrics
+M: Remy Horton <remy.horton@intel.com>
+F: lib/librte_metrics/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 37aa1e1..1e84c3b 100644
--- a/config/common_base
+++ b/config/common_base
@@ -506,6 +506,11 @@ CONFIG_RTE_LIBRTE_EFD=y
 CONFIG_RTE_LIBRTE_JOBSTATS=y
 
 #
+# Compile the device metrics library
+#
+CONFIG_RTE_LIBRTE_METRICS=y
+
+#
 # Compile librte_lpm
 #
 CONFIG_RTE_LIBRTE_LPM=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index eb39f69..26a26b7 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -156,4 +156,5 @@ There are many libraries, so their headers may be grouped by topics:
   [common]             (@ref rte_common.h),
   [ABI compat]         (@ref rte_compat.h),
   [keepalive]          (@ref rte_keepalive.h),
+  [device metrics]     (@ref rte_metrics.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index fdcf13c..fbbcf8e 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -52,6 +52,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_mbuf \
                           lib/librte_mempool \
                           lib/librte_meter \
+                          lib/librte_metrics \
                           lib/librte_net \
                           lib/librte_pdump \
                           lib/librte_pipeline \
diff --git a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst
index 77f427e..2a69844 100644
--- a/doc/guides/prog_guide/index.rst
+++ b/doc/guides/prog_guide/index.rst
@@ -62,6 +62,7 @@ Programmer's Guide
     packet_classif_access_ctrl
     packet_framework
     vhost_lib
+    metrics_lib
     port_hotplug_framework
     source_org
     dev_kit_build_system
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
new file mode 100644
index 0000000..87f806d
--- /dev/null
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -0,0 +1,180 @@
+..  BSD LICENSE
+    Copyright(c) 2017 Intel Corporation. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+.. _Metrics_Library:
+
+Metrics Library
+===============
+
+The Metrics library implements a mechanism by which *producers* can
+publish numeric information for later querying by *consumers*. In
+practice producers will typically be other libraries or primary
+processes, whereas consumers will typically be applications.
+
+Metrics themselves are statistics that are not generated by PMDs. Metric
+information is populated using a push model, where producers update the
+values contained within the metric library by calling an update function
+on the relevant metrics. Consumers receive metric information by querying
+the central metric data, which is held in shared memory.
+
+For each metric, a separate value is maintained for each port id, and
+when publishing metric values the producers need to specify which port is
+being updated. In addition there is a special id ``RTE_METRICS_GLOBAL``
+that is intended for global statistics that are not associated with any
+individual device. Since the metrics library is self-contained, the only
+restriction on port numbers is that they are less than ``RTE_MAX_ETHPORTS``
+- there is no requirement for the ports to actually exist.
+
+Initialising the library
+------------------------
+
+Before the library can be used, it has to be initialized by calling
+``rte_metrics_init()`` which sets up the metric store in shared memory.
+This is where producers will publish metric information to, and where
+consumers will query it from.
+
+.. code-block:: c
+
+    rte_metrics_init(rte_socket_id());
+
+This function **must** be called from a primary process, but otherwise
+producers and consumers can be in either primary or secondary processes.
+
+Registering metrics
+-------------------
+
+Metrics must first be *registered*, which is the way producers declare
+the names of the metrics they will be publishing. Registration can either
+be done individually, or a set of metrics can be registered as a group.
+Individual registration is done using ``rte_metrics_reg_name()``:
+
+.. code-block:: c
+
+    id_1 = rte_metrics_reg_name("mean_bits_in");
+    id_2 = rte_metrics_reg_name("mean_bits_out");
+    id_3 = rte_metrics_reg_name("peak_bits_in");
+    id_4 = rte_metrics_reg_name("peak_bits_out");
+
+or alternatively, a set of metrics can be registered together using
+``rte_metrics_reg_names()``:
+
+.. code-block:: c
+
+    const char * const names[] = {
+        "mean_bits_in", "mean_bits_out",
+        "peak_bits_in", "peak_bits_out",
+    };
+    id_set = rte_metrics_reg_names(&names[0], 4);
+
+If the return value is negative, it means registration failed. Otherwise
+the return value is the *key* for the metric, which is used when updating
+values. A table mapping together these key values and the metrics' names
+can be obtained using ``rte_metrics_get_names()``.
+
+Updating metric values
+----------------------
+
+Once registered, producers can update the metric for a given port using
+the ``rte_metrics_update_value()`` function. This uses the metric key
+that is returned when registering the metric, and can also be looked up
+using ``rte_metrics_get_names()``.
+
+.. code-block:: c
+
+    rte_metrics_update_value(port_id, id_1, values[0]);
+    rte_metrics_update_value(port_id, id_2, values[1]);
+    rte_metrics_update_value(port_id, id_3, values[2]);
+    rte_metrics_update_value(port_id, id_4, values[3]);
+
+if metrics were registered as a single set, they can either be updated
+individually using ``rte_metrics_update_value()``, or updated together
+using the ``rte_metrics_update_values()`` function:
+
+.. code-block:: c
+
+    rte_metrics_update_value(port_id, id_set, values[0]);
+    rte_metrics_update_value(port_id, id_set + 1, values[1]);
+    rte_metrics_update_value(port_id, id_set + 2, values[2]);
+    rte_metrics_update_value(port_id, id_set + 3, values[3]);
+
+    rte_metrics_update_values(port_id, id_set, values, 4);
+
+Note that ``rte_metrics_update_values()`` cannot be used to update
+metric values from *multiple* *sets*, as there is no guarantee two
+sets registered one after the other have contiguous id values.
+
+Querying metrics
+----------------
+
+Consumers can obtain metric values by querying the metrics library using
+the ``rte_metrics_get_values()`` function that return an array of
+``struct rte_metric_value``. Each entry within this array contains a metric
+value and its associated key. A key-name mapping can be obtained using the
+``rte_metrics_get_names()`` function that returns an array of
+``struct rte_metric_name`` that is indexed by the key. The following will
+print out all metrics for a given port:
+
+.. code-block:: c
+
+    void print_metrics() {
+        struct rte_metric_name *names;
+        int len;
+
+        len = rte_metrics_get_names(NULL, 0);
+        if (len < 0) {
+            printf("Cannot get metrics count\n");
+            return;
+        }
+        if (len == 0) {
+            printf("No metrics to display (none have been registered)\n");
+            return;
+        }
+        metrics = malloc(sizeof(struct rte_metric_value) * len);
+        names =  malloc(sizeof(struct rte_metric_name) * len);
+        if (metrics == NULL || names == NULL) {
+            printf("Cannot allocate memory\n");
+            free(metrics);
+            free(names);
+            return;
+        }
+        ret = rte_metrics_get_values(port_id, metrics, len);
+        if (ret < 0 || ret > len) {
+            printf("Cannot get metrics values\n");
+            free(metrics);
+            free(names);
+            return;
+        }
+        printf("Metrics for port %i:\n", port_id);
+        for (i = 0; i < len; i++)
+            printf("  %s: %"PRIu64"\n",
+                names[metrics[i].key].name, metrics[i].value);
+        free(metrics);
+        free(names);
+    }
diff --git a/doc/guides/rel_notes/release_17_02.rst b/doc/guides/rel_notes/release_17_02.rst
index 357965a..8bd706f 100644
--- a/doc/guides/rel_notes/release_17_02.rst
+++ b/doc/guides/rel_notes/release_17_02.rst
@@ -368,6 +368,7 @@ The libraries prepended with a plus sign were incremented in this version.
      librte_mbuf.so.2
      librte_mempool.so.2
      librte_meter.so.1
+   + librte_metrics.so.1
      librte_net.so.1
      librte_pdump.so.1
      librte_pipeline.so.3
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 2a045b3..33bc8dd 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -75,6 +75,14 @@ Resolved Issues
    Also, make sure to start the actual text at the margin.
    =========================================================
 
+* **Added information metric library.**
+
+  A library that allows information metrics to be added and updated
+  by producers, typically other libraries, for later retrieval by
+  consumers such as applications. It is intended to provide a
+  reporting mechanism that is independent of other libraries such
+  as ethdev.
+
 
 EAL
 ~~~
diff --git a/lib/Makefile b/lib/Makefile
index 4178325..29f6a81 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -49,6 +49,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ACL) += librte_acl
 DIRS-$(CONFIG_RTE_LIBRTE_NET) += librte_net
 DIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += librte_ip_frag
 DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
+DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
 DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
diff --git a/lib/librte_metrics/Makefile b/lib/librte_metrics/Makefile
new file mode 100644
index 0000000..8d6e23a
--- /dev/null
+++ b/lib/librte_metrics/Makefile
@@ -0,0 +1,51 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_metrics.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
+
+EXPORT_MAP := rte_metrics_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_METRICS) := rte_metrics.c
+
+# Install header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_METRICS)-include += rte_metrics.h
+
+DEPDIRS-$(CONFIG_RTE_LIBRTE_METRICS) += lib/librte_eal
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_metrics/rte_metrics.c b/lib/librte_metrics/rte_metrics.c
new file mode 100644
index 0000000..aa9ec50
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics.c
@@ -0,0 +1,299 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_metrics.h>
+#include <rte_lcore.h>
+#include <rte_memzone.h>
+#include <rte_spinlock.h>
+
+#define RTE_METRICS_MAX_METRICS 256
+#define RTE_METRICS_MEMZONE_NAME "RTE_METRICS"
+
+/**
+ * Internal stats metadata and value entry.
+ *
+ * @internal
+ */
+struct rte_metrics_meta_s {
+	/** Name of metric */
+	char name[RTE_METRICS_MAX_NAME_LEN];
+	/** Current value for metric */
+	uint64_t value[RTE_MAX_ETHPORTS];
+	/** Used for global metrics */
+	uint64_t global_value;
+	/** Index of next root element (zero for none) */
+	uint16_t idx_next_set;
+	/** Index of next metric in set (zero for none) */
+	uint16_t idx_next_stat;
+};
+
+/**
+ * Internal stats info structure.
+ *
+ * @internal
+ * Offsets into metadata are used instead of pointers because ASLR
+ * means that having the same physical addresses in different
+ * processes is not guaranteed.
+ */
+struct rte_metrics_data_s {
+	/**   Index of last metadata entry with valid data.
+	 * This value is not valid if cnt_stats is zero.
+	 */
+	uint16_t idx_last_set;
+	/**   Number of metrics. */
+	uint16_t cnt_stats;
+	/** Metric data memory block. */
+	struct rte_metrics_meta_s metadata[RTE_METRICS_MAX_METRICS];
+	/** Metric data access lock */
+	rte_spinlock_t lock;
+};
+
+void
+rte_metrics_init(int socket_id)
+{
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+		return;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone != NULL)
+		return;
+	memzone = rte_memzone_reserve(RTE_METRICS_MEMZONE_NAME,
+		sizeof(struct rte_metrics_data_s), socket_id, 0);
+	if (memzone == NULL)
+		rte_exit(EXIT_FAILURE, "Unable to allocate stats memzone\n");
+	stats = memzone->addr;
+	memset(stats, 0, sizeof(struct rte_metrics_data_s));
+	rte_spinlock_init(&stats->lock);
+}
+
+int
+rte_metrics_reg_name(const char *name)
+{
+	const char * const list_names[] = {name};
+
+	return rte_metrics_reg_names(list_names, 1);
+}
+
+int
+rte_metrics_reg_names(const char * const *names, uint16_t cnt_names)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	uint16_t idx_base;
+
+	/* Some sanity checks */
+	if (cnt_names < 1 || names == NULL)
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone == NULL)
+		return -EIO;
+	stats = memzone->addr;
+
+	if (stats->cnt_stats + cnt_names >= RTE_METRICS_MAX_METRICS)
+		return -ENOMEM;
+
+	rte_spinlock_lock(&stats->lock);
+
+	/* Overwritten later if this is actually first set.. */
+	stats->metadata[stats->idx_last_set].idx_next_set = stats->cnt_stats;
+
+	stats->idx_last_set = idx_base = stats->cnt_stats;
+
+	for (idx_name = 0; idx_name < cnt_names; idx_name++) {
+		entry = &stats->metadata[idx_name + stats->cnt_stats];
+		strncpy(entry->name, names[idx_name],
+			RTE_METRICS_MAX_NAME_LEN);
+		memset(entry->value, 0, sizeof(entry->value));
+		entry->idx_next_stat = idx_name + stats->cnt_stats + 1;
+	}
+	entry->idx_next_stat = 0;
+	entry->idx_next_set = 0;
+	stats->cnt_stats += cnt_names;
+
+	rte_spinlock_unlock(&stats->lock);
+
+	return idx_base;
+}
+
+int
+rte_metrics_update_value(int port_id, uint16_t key, const uint64_t value)
+{
+	return rte_metrics_update_values(port_id, key, &value, 1);
+}
+
+int
+rte_metrics_update_values(int port_id,
+	uint16_t key,
+	const uint64_t *values,
+	uint32_t count)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_metric;
+	uint16_t idx_value;
+	uint16_t cnt_setsize;
+
+	if (port_id != RTE_METRICS_GLOBAL &&
+			(port_id < 0 || port_id > RTE_MAX_ETHPORTS))
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone == NULL)
+		return -EIO;
+	stats = memzone->addr;
+
+	rte_spinlock_lock(&stats->lock);
+	idx_metric = key;
+	cnt_setsize = 1;
+	while (idx_metric < stats->cnt_stats) {
+		entry = &stats->metadata[idx_metric];
+		if (entry->idx_next_stat == 0)
+			break;
+		cnt_setsize++;
+		idx_metric++;
+	}
+	/* Check update does not cross set border */
+	if (count > cnt_setsize) {
+		rte_spinlock_unlock(&stats->lock);
+		return -ERANGE;
+	}
+
+	if (port_id == RTE_METRICS_GLOBAL)
+		for (idx_value = 0; idx_value < count; idx_value++) {
+			idx_metric = key + idx_value;
+			stats->metadata[idx_metric].global_value =
+				values[idx_value];
+		}
+	else
+		for (idx_value = 0; idx_value < count; idx_value++) {
+			idx_metric = key + idx_value;
+			stats->metadata[idx_metric].value[port_id] =
+				values[idx_value];
+		}
+	rte_spinlock_unlock(&stats->lock);
+	return 0;
+}
+
+int
+rte_metrics_get_names(struct rte_metric_name *names,
+	uint16_t capacity)
+{
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	int return_value;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	/* If not allocated, fail silently */
+	if (memzone == NULL)
+		return 0;
+
+	stats = memzone->addr;
+	rte_spinlock_lock(&stats->lock);
+	if (names != NULL) {
+		if (capacity < stats->cnt_stats) {
+			return_value = stats->cnt_stats;
+			rte_spinlock_unlock(&stats->lock);
+			return return_value;
+		}
+		for (idx_name = 0; idx_name < stats->cnt_stats; idx_name++)
+			strncpy(names[idx_name].name,
+				stats->metadata[idx_name].name,
+				RTE_METRICS_MAX_NAME_LEN);
+	}
+	return_value = stats->cnt_stats;
+	rte_spinlock_unlock(&stats->lock);
+	return return_value;
+}
+
+int
+rte_metrics_get_values(int port_id,
+	struct rte_metric_value *values,
+	uint16_t capacity)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	int return_value;
+
+	if (port_id != RTE_METRICS_GLOBAL &&
+			(port_id < 0 || port_id > RTE_MAX_ETHPORTS))
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	/* If not allocated, fail silently */
+	if (memzone == NULL)
+		return 0;
+	stats = memzone->addr;
+	rte_spinlock_lock(&stats->lock);
+
+	if (values != NULL) {
+		if (capacity < stats->cnt_stats) {
+			return_value = stats->cnt_stats;
+			rte_spinlock_unlock(&stats->lock);
+			return return_value;
+		}
+		if (port_id == RTE_METRICS_GLOBAL)
+			for (idx_name = 0;
+					idx_name < stats->cnt_stats;
+					idx_name++) {
+				entry = &stats->metadata[idx_name];
+				values[idx_name].key = idx_name;
+				values[idx_name].value = entry->global_value;
+			}
+		else
+			for (idx_name = 0;
+					idx_name < stats->cnt_stats;
+					idx_name++) {
+				entry = &stats->metadata[idx_name];
+				values[idx_name].key = idx_name;
+				values[idx_name].value = entry->value[port_id];
+			}
+	}
+	return_value = stats->cnt_stats;
+	rte_spinlock_unlock(&stats->lock);
+	return return_value;
+}
diff --git a/lib/librte_metrics/rte_metrics.h b/lib/librte_metrics/rte_metrics.h
new file mode 100644
index 0000000..7458328
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics.h
@@ -0,0 +1,240 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * @file
+ *
+ * DPDK Metrics module
+ *
+ * Metrics are statistics that are not generated by PMDs, and hence
+ * are better reported through a mechanism that is independent from
+ * the ethdev-based extended statistics. Providers will typically
+ * be other libraries and consumers will typically be applications.
+ *
+ * Metric information is populated using a push model, where producers
+ * update the values contained within the metric library by calling
+ * an update function on the relevant metrics. Consumers receive
+ * metric information by querying the central metric data, which is
+ * held in shared memory. Currently only bulk querying of metrics
+ * by consumers is supported.
+ */
+
+#ifndef _RTE_METRICS_H_
+#define _RTE_METRICS_H_
+
+/** Maximum length of metric name (including null-terminator) */
+#define RTE_METRICS_MAX_NAME_LEN 64
+
+/**
+ * Global metric special id.
+ *
+ * When used for the port_id parameter when calling
+ * rte_metrics_update_metric() or rte_metrics_update_metric(),
+ * the global metric, which are not associated with any specific
+ * port (i.e. device), are updated.
+ */
+#define RTE_METRICS_GLOBAL -1
+
+
+/**
+ * A name-key lookup for metrics.
+ *
+ * An array of this structure is returned by rte_metrics_get_names().
+ * The struct rte_metric_value references these names via their array index.
+ */
+struct rte_metric_name {
+	/** String describing metric */
+	char name[RTE_METRICS_MAX_NAME_LEN];
+};
+
+
+/**
+ * Metric value structure.
+ *
+ * This structure is used by rte_metrics_get_values() to return metrics,
+ * which are statistics that are not generated by PMDs. It maps a name key,
+ * which corresponds to an index in the array returned by
+ * rte_metrics_get_names().
+ */
+struct rte_metric_value {
+	/** Numeric identifier of metric. */
+	uint16_t key;
+	/** Value for metric */
+	uint64_t value;
+};
+
+
+/**
+ * Initializes metric module. This function must be called from
+ * a primary process before metrics are used.
+ *
+ * @param socket_id
+ *   Socket to use for shared memory allocation.
+ */
+void rte_metrics_init(int socket_id);
+
+/**
+ * Register a metric, making it available as a reporting parameter.
+ *
+ * Registering a metric is the way producers declare a parameter
+ * that they wish to be reported. Once registered, the associated
+ * numeric key can be obtained via rte_metrics_get_names(), which
+ * is required for updating said metric's value.
+ *
+ * @param name
+ *   Metric name
+ *
+ * @return
+ *  - Zero or positive: Success (index key of new metric)
+ *  - -EIO: Error, unable to access metrics shared memory
+ *    (rte_metrics_init() not called)
+ *  - -EINVAL: Error, invalid parameters
+ *  - -ENOMEM: Error, maximum metrics reached
+ */
+int rte_metrics_reg_name(const char *name);
+
+/**
+ * Register a set of metrics.
+ *
+ * This is a bulk version of rte_metrics_reg_metrics() and aside from
+ * handling multiple keys at once is functionally identical.
+ *
+ * @param names
+ *   List of metric names
+ *
+ * @param cnt_names
+ *   Number of metrics in set
+ *
+ * @return
+ *  - Zero or positive: Success (index key of start of set)
+ *  - -EIO: Error, unable to access metrics shared memory
+ *    (rte_metrics_init() not called)
+ *  - -EINVAL: Error, invalid parameters
+ *  - -ENOMEM: Error, maximum metrics reached
+ */
+int rte_metrics_reg_names(const char * const *names, uint16_t cnt_names);
+
+/**
+ * Get metric name-key lookup table.
+ *
+ * @param names
+ *   A struct rte_metric_name array of at least *capacity* in size to
+ *   receive key names. If this is NULL, function returns the required
+ *   number of elements for this array.
+ *
+ * @param capacity
+ *   Size (number of elements) of struct rte_metric_name array.
+ *   Disregarded if names is NULL.
+ *
+ * @return
+ *   - Positive value above capacity: error, *names* is too small.
+ *     Return value is required size.
+ *   - Positive value equal or less than capacity: Success. Return
+ *     value is number of elements filled in.
+ *   - Negative value: error.
+ */
+int rte_metrics_get_names(
+	struct rte_metric_name *names,
+	uint16_t capacity);
+
+/**
+ * Get metric value table.
+ *
+ * @param port_id
+ *   Port id to query
+ *
+ * @param values
+ *   A struct rte_metric_value array of at least *capacity* in size to
+ *   receive metric ids and values. If this is NULL, function returns
+ *   the required number of elements for this array.
+ *
+ * @param capacity
+ *   Size (number of elements) of struct rte_metric_value array.
+ *   Disregarded if names is NULL.
+ *
+ * @return
+ *   - Positive value above capacity: error, *values* is too small.
+ *     Return value is required size.
+ *   - Positive value equal or less than capacity: Success. Return
+ *     value is number of elements filled in.
+ *   - Negative value: error.
+ */
+int rte_metrics_get_values(
+	int port_id,
+	struct rte_metric_value *values,
+	uint16_t capacity);
+
+/**
+ * Updates a metric
+ *
+ * @param port_id
+ *   Port to update metrics for
+ * @param key
+ *   Id of metric to update
+ * @param value
+ *   New value
+ *
+ * @return
+ *   - -EIO if unable to access shared metrics memory
+ *   - Zero on success
+ */
+int rte_metrics_update_value(
+	int port_id,
+	uint16_t key,
+	const uint64_t value);
+
+/**
+ * Updates a metric set. Note that it is an error to try to
+ * update across a set boundary.
+ *
+ * @param port_id
+ *   Port to update metrics for
+ * @param key
+ *   Base id of metrics set to update
+ * @param values
+ *   Set of new values
+ * @param count
+ *   Number of new values
+ *
+ * @return
+ *   - -ERANGE if count exceeds metric set size
+ *   - -EIO if upable to access shared metrics memory
+ *   - Zero on success
+ */
+int rte_metrics_update_values(
+	int port_id,
+	uint16_t key,
+	const uint64_t *values,
+	uint32_t count);
+
+#endif
diff --git a/lib/librte_metrics/rte_metrics_version.map b/lib/librte_metrics/rte_metrics_version.map
new file mode 100644
index 0000000..4c5234c
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics_version.map
@@ -0,0 +1,13 @@
+DPDK_17.05 {
+	global:
+
+	rte_metrics_get_names;
+	rte_metrics_get_values;
+	rte_metrics_init;
+	rte_metrics_reg_name;
+	rte_metrics_reg_names;
+	rte_metrics_update_value;
+	rte_metrics_update_values;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 0e0b600..dfe5232 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -99,6 +99,8 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_RING)           += -lrte_ring
 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
+_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
+
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v12 2/6] app/proc_info: add metrics displaying
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library Remy Horton
@ 2017-03-27 20:21 ` Remy Horton
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library Remy Horton
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-27 20:21 UTC (permalink / raw)
  To: dev; +Cc: Reshma Pattan, Thomas Monjalon

From: Reshma Pattan <reshma.pattan@intel.com>

Modify the dpdk-procinfo process to display the newly added metrics.
Added new command line option "--metrics" to display metrics.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/proc_info/main.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)

diff --git a/app/proc_info/main.c b/app/proc_info/main.c
index ef2098d..d576b42 100644
--- a/app/proc_info/main.c
+++ b/app/proc_info/main.c
@@ -1,7 +1,7 @@
 /*
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -58,6 +58,7 @@
 #include <rte_atomic.h>
 #include <rte_branch_prediction.h>
 #include <rte_string_fns.h>
+#include <rte_metrics.h>
 
 /* Maximum long option length for option parsing. */
 #define MAX_LONG_OPT_SZ 64
@@ -77,6 +78,8 @@ static uint32_t enable_collectd_format;
 static int stdout_fd;
 /**< Host id process is running on */
 static char host_id[MAX_LONG_OPT_SZ];
+/**< Enable metrics. */
+static uint32_t enable_metrics;
 /**< Enable stats reset. */
 static uint32_t reset_stats;
 /**< Enable xstats reset. */
@@ -94,6 +97,8 @@ proc_info_usage(const char *prgname)
 		"  --stats: to display port statistics, enabled by default\n"
 		"  --xstats: to display extended port statistics, disabled by "
 			"default\n"
+		"  --metrics: to display derived metrics of the ports, disabled by "
+			"default\n"
 		"  --stats-reset: to reset port statistics\n"
 		"  --xstats-reset: to reset port extended statistics\n"
 		"  --collectd-format: to print statistics to STDOUT in expected by collectd format\n"
@@ -171,6 +176,7 @@ proc_info_parse_args(int argc, char **argv)
 		{"stats", 0, NULL, 0},
 		{"stats-reset", 0, NULL, 0},
 		{"xstats", 0, NULL, 0},
+		{"metrics", 0, NULL, 0},
 		{"xstats-reset", 0, NULL, 0},
 		{"collectd-format", 0, NULL, 0},
 		{"host-id", 0, NULL, 0},
@@ -205,6 +211,10 @@ proc_info_parse_args(int argc, char **argv)
 			else if (!strncmp(long_option[option_index].name, "xstats",
 					MAX_LONG_OPT_SZ))
 				enable_xstats = 1;
+			else if (!strncmp(long_option[option_index].name,
+					"metrics",
+					MAX_LONG_OPT_SZ))
+				enable_metrics = 1;
 			/* Reset stats */
 			if (!strncmp(long_option[option_index].name, "stats-reset",
 					MAX_LONG_OPT_SZ))
@@ -414,6 +424,67 @@ nic_xstats_clear(uint8_t port_id)
 	printf("\n  NIC extended statistics for port %d cleared\n", port_id);
 }
 
+static void
+metrics_display(int port_id)
+{
+	struct rte_metric_value *metrics;
+	struct rte_metric_name *names;
+	int len, ret;
+	static const char *nic_stats_border = "########################";
+
+	len = rte_metrics_get_names(NULL, 0);
+	if (len < 0) {
+		printf("Cannot get metrics count\n");
+		return;
+	}
+	if (len == 0) {
+		printf("No metrics to display (none have been registered)\n");
+		return;
+	}
+
+	metrics = rte_malloc("proc_info_metrics",
+		sizeof(struct rte_metric_value) * len, 0);
+	if (metrics == NULL) {
+		printf("Cannot allocate memory for metrics\n");
+		return;
+	}
+
+	names =  rte_malloc(NULL, sizeof(struct rte_metric_name) * len, 0);
+	if (names == NULL) {
+		printf("Cannot allocate memory for metrcis names\n");
+		rte_free(metrics);
+		return;
+	}
+
+	if (len != rte_metrics_get_names(names, len)) {
+		printf("Cannot get metrics names\n");
+		rte_free(metrics);
+		rte_free(names);
+		return;
+	}
+
+	if (port_id == RTE_METRICS_GLOBAL)
+		printf("###### Non port specific metrics  #########\n");
+	else
+		printf("###### metrics for port %-2d #########\n", port_id);
+	printf("%s############################\n", nic_stats_border);
+	ret = rte_metrics_get_values(port_id, metrics, len);
+	if (ret < 0 || ret > len) {
+		printf("Cannot get metrics values\n");
+		rte_free(metrics);
+		rte_free(names);
+		return;
+	}
+
+	int i;
+	for (i = 0; i < len; i++)
+		printf("%s: %"PRIu64"\n", names[i].name, metrics[i].value);
+
+	printf("%s############################\n", nic_stats_border);
+	rte_free(metrics);
+	rte_free(names);
+}
+
 int
 main(int argc, char **argv)
 {
@@ -480,8 +551,14 @@ main(int argc, char **argv)
 				nic_stats_clear(i);
 			else if (reset_xstats)
 				nic_xstats_clear(i);
+			else if (enable_metrics)
+				metrics_display(i);
 		}
 	}
 
+	/* print port independent stats */
+	if (enable_metrics)
+		metrics_display(RTE_METRICS_GLOBAL);
+
 	return 0;
 }
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library Remy Horton
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 2/6] app/proc_info: add metrics displaying Remy Horton
@ 2017-03-27 20:21 ` Remy Horton
  2017-03-28 15:30   ` Pattan, Reshma
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
                   ` (4 subsequent siblings)
  7 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-03-27 20:21 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 MAINTAINERS                                        |   4 +
 config/common_base                                 |   5 +
 doc/api/doxy-api-index.md                          |   1 +
 doc/api/doxy-api.conf                              |   1 +
 doc/guides/prog_guide/metrics_lib.rst              |  65 ++++++++++
 doc/guides/rel_notes/release_17_02.rst             |   1 +
 doc/guides/rel_notes/release_17_05.rst             |   5 +
 lib/Makefile                                       |   1 +
 lib/librte_bitratestats/Makefile                   |  53 ++++++++
 lib/librte_bitratestats/rte_bitrate.c              | 141 +++++++++++++++++++++
 lib/librte_bitratestats/rte_bitrate.h              |  80 ++++++++++++
 .../rte_bitratestats_version.map                   |   9 ++
 mk/rte.app.mk                                      |   1 +
 13 files changed, 367 insertions(+)
 create mode 100644 lib/librte_bitratestats/Makefile
 create mode 100644 lib/librte_bitratestats/rte_bitrate.c
 create mode 100644 lib/librte_bitratestats/rte_bitrate.h
 create mode 100644 lib/librte_bitratestats/rte_bitratestats_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index d58a1a7..9045454 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -630,6 +630,10 @@ Metrics
 M: Remy Horton <remy.horton@intel.com>
 F: lib/librte_metrics/
 
+Bit-rate statistics
+M: Remy Horton <remy.horton@intel.com>
+F: lib/librte_bitratestats/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 1e84c3b..e6163eb 100644
--- a/config/common_base
+++ b/config/common_base
@@ -635,3 +635,8 @@ CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
 # Compile the crypto performance application
 #
 CONFIG_RTE_APP_CRYPTO_PERF=y
+
+#
+# Compile the bitrate statistics library
+#
+CONFIG_RTE_LIBRTE_BITRATE=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 26a26b7..8492bce 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -157,4 +157,5 @@ There are many libraries, so their headers may be grouped by topics:
   [ABI compat]         (@ref rte_compat.h),
   [keepalive]          (@ref rte_keepalive.h),
   [device metrics]     (@ref rte_metrics.h),
+  [bitrate statistics] (@ref rte_bitrate.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index fbbcf8e..c4b3b68 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -36,6 +36,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_eal/common/include \
                           lib/librte_eal/common/include/generic \
                           lib/librte_acl \
+                          lib/librte_bitratestats \
                           lib/librte_cfgfile \
                           lib/librte_cmdline \
                           lib/librte_compat \
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
index 87f806d..1c2a28f 100644
--- a/doc/guides/prog_guide/metrics_lib.rst
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -178,3 +178,68 @@ print out all metrics for a given port:
         free(metrics);
         free(names);
     }
+
+
+Bit-rate statistics library
+---------------------------
+
+The bit-rate library calculates the exponentially-weighted moving
+average and peak bit-rates for each active port (i.e. network device).
+These statistics are reported via the metrics library using the
+following names:
+
+    - ``mean_bits_in``: Average inbound bit-rate
+    - ``mean_bits_out``:  Average outbound bit-rate
+    - ``ewma_bits_in``: Average inbound bit-rate (EWMA smoothed)
+    - ``ewma_bits_out``:  Average outbound bit-rate (EWMA smoothed)
+    - ``peak_bits_in``:  Peak inbound bit-rate
+    - ``peak_bits_out``:  Peak outbound bit-rate
+
+Once initialised and clocked at the appropriate frequency, these
+statistics can be obtained by querying the metrics library.
+
+Initialization
+~~~~~~~~~~~~~~
+
+Before it is used the bit-rate statistics library has to be initialised
+by calling ``rte_stats_bitrate_create()``, which will return a bit-rate
+calculation object. Since the bit-rate library uses the metrics library
+to report the calculated statistics, the bit-rate library then needs to
+register the calculated statistics with the metrics library. This is
+done using the helper function ``rte_stats_bitrate_reg()``.
+
+.. code-block:: c
+
+    struct rte_stats_bitrates *bitrate_data;
+
+    bitrate_data = rte_stats_bitrate_create();
+    if (bitrate_data == NULL)
+        rte_exit(EXIT_FAILURE, "Could not allocate bit-rate data.\n");
+    rte_stats_bitrate_reg(bitrate_data);
+
+Controlling the sampling rate
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Since the library works by periodic sampling but does not use an
+internal thread, the application has to periodically call
+``rte_stats_bitrate_calc()``. The frequency at which this function
+is called should be the intended sampling rate required for the
+calculated statistics. For instance if per-second statistics are
+desired, this function should be called once a second.
+
+.. code-block:: c
+
+    tics_datum = rte_rdtsc();
+    tics_per_1sec = rte_get_timer_hz();
+
+    while( 1 ) {
+        /* ... */
+        tics_current = rte_rdtsc();
+	if (tics_current - tics_datum >= tics_per_1sec) {
+	    /* Periodic bitrate calculation */
+	    for (idx_port = 0; idx_port < cnt_ports; idx_port++)
+	            rte_stats_bitrate_calc(bitrate_data, idx_port);
+		tics_datum = tics_current;
+	    }
+        /* ... */
+    }
diff --git a/doc/guides/rel_notes/release_17_02.rst b/doc/guides/rel_notes/release_17_02.rst
index 8bd706f..63786df 100644
--- a/doc/guides/rel_notes/release_17_02.rst
+++ b/doc/guides/rel_notes/release_17_02.rst
@@ -353,6 +353,7 @@ The libraries prepended with a plus sign were incremented in this version.
 .. code-block:: diff
 
      librte_acl.so.2
+   + librte_bitratestats.so.1
      librte_cfgfile.so.2
      librte_cmdline.so.2
      librte_cryptodev.so.2
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 33bc8dd..f1b83bc 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -83,6 +83,11 @@ Resolved Issues
   reporting mechanism that is independent of other libraries such
   as ethdev.
 
+* **Added bit-rate calculation library.**
+
+  A library that can be used to calculate device bit-rates. Calculated
+  bitrates are reported using the metrics library.
+
 
 EAL
 ~~~
diff --git a/lib/Makefile b/lib/Makefile
index 29f6a81..ecc54c0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -50,6 +50,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_NET) += librte_net
 DIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += librte_ip_frag
 DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
 DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
+DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
 DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
diff --git a/lib/librte_bitratestats/Makefile b/lib/librte_bitratestats/Makefile
new file mode 100644
index 0000000..743b62c
--- /dev/null
+++ b/lib/librte_bitratestats/Makefile
@@ -0,0 +1,53 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_bitratestats.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
+
+EXPORT_MAP := rte_bitratestats_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_BITRATE) := rte_bitrate.c
+
+# Install header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_BITRATE)-include += rte_bitrate.h
+
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_metrics
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_bitratestats/rte_bitrate.c b/lib/librte_bitratestats/rte_bitrate.c
new file mode 100644
index 0000000..3252598
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitrate.c
@@ -0,0 +1,141 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_metrics.h>
+#include <rte_bitrate.h>
+
+/*
+ * Persistent bit-rate data.
+ * @internal
+ */
+struct rte_stats_bitrate {
+	uint64_t last_ibytes;
+	uint64_t last_obytes;
+	uint64_t peak_ibits;
+	uint64_t peak_obits;
+	uint64_t mean_ibits;
+	uint64_t mean_obits;
+	uint64_t ewma_ibits;
+	uint64_t ewma_obits;
+};
+
+struct rte_stats_bitrates {
+	struct rte_stats_bitrate port_stats[RTE_MAX_ETHPORTS];
+	uint16_t id_stats_set;
+};
+
+struct rte_stats_bitrates *
+rte_stats_bitrate_create(void)
+{
+	return rte_zmalloc(NULL, sizeof(struct rte_stats_bitrates),
+		RTE_CACHE_LINE_SIZE);
+}
+
+int
+rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data)
+{
+	const char * const names[] = {
+		"ewma_bits_in", "ewma_bits_out",
+		"mean_bits_in", "mean_bits_out",
+		"peak_bits_in", "peak_bits_out",
+	};
+	int return_value;
+
+	return_value = rte_metrics_reg_names(&names[0], 6);
+	if (return_value >= 0)
+		bitrate_data->id_stats_set = return_value;
+	return return_value;
+}
+
+int
+rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+	uint8_t port_id)
+{
+	struct rte_stats_bitrate *port_data;
+	struct rte_eth_stats eth_stats;
+	int ret_code;
+	uint64_t cnt_bits;
+	int64_t delta;
+	const int64_t alpha_percent = 20;
+	uint64_t values[6];
+
+	ret_code = rte_eth_stats_get(port_id, &eth_stats);
+	if (ret_code != 0)
+		return ret_code;
+
+	port_data = &bitrate_data->port_stats[port_id];
+
+	/* Incoming bitrate. This is an iteratively calculated EWMA
+	 * (Expomentially Weighted Moving Average) that uses a
+	 * weighting factor of alpha_percent. An unsmoothed mean
+	 * for just the current time delta is also calculated for the
+	 * benefit of people who don't understand signal processing.
+	 */
+	cnt_bits = (eth_stats.ibytes - port_data->last_ibytes) << 3;
+	port_data->last_ibytes = eth_stats.ibytes;
+	if (cnt_bits > port_data->peak_ibits)
+		port_data->peak_ibits = cnt_bits;
+	delta = cnt_bits;
+	delta -= port_data->ewma_ibits;
+	/* The +-50 fixes integer rounding during divison */
+	if (delta > 0)
+		delta = (delta * alpha_percent + 50) / 100;
+	else
+		delta = (delta * alpha_percent - 50) / 100;
+	port_data->ewma_ibits += delta;
+	port_data->mean_ibits = cnt_bits;
+
+	/* Outgoing bitrate (also EWMA) */
+	cnt_bits = (eth_stats.obytes - port_data->last_obytes) << 3;
+	port_data->last_obytes = eth_stats.obytes;
+	if (cnt_bits > port_data->peak_obits)
+		port_data->peak_obits = cnt_bits;
+	delta = cnt_bits;
+	delta -= port_data->ewma_obits;
+	delta = (delta * alpha_percent + 50) / 100;
+	port_data->ewma_obits += delta;
+	port_data->mean_obits = cnt_bits;
+
+	values[0] = port_data->ewma_ibits;
+	values[1] = port_data->ewma_obits;
+	values[2] = port_data->mean_ibits;
+	values[3] = port_data->mean_obits;
+	values[4] = port_data->peak_ibits;
+	values[5] = port_data->peak_obits;
+	rte_metrics_update_values(port_id, bitrate_data->id_stats_set,
+		values, 6);
+	return 0;
+}
diff --git a/lib/librte_bitratestats/rte_bitrate.h b/lib/librte_bitratestats/rte_bitrate.h
new file mode 100644
index 0000000..564e4f7
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitrate.h
@@ -0,0 +1,80 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/**
+ *  Bitrate statistics data structure.
+ *  This data structure is intentionally opaque.
+ */
+struct rte_stats_bitrates;
+
+
+/**
+ * Allocate a bitrate statistics structure
+ *
+ * @return
+ *   - Pointer to structure on success
+ *   - NULL on error (zmalloc failure)
+ */
+struct rte_stats_bitrates *rte_stats_bitrate_create(void);
+
+
+/**
+ * Register bitrate statistics with the metric library.
+ *
+ * @param bitrate_data
+ *   Pointer allocated by rte_stats_create()
+ *
+ * @return
+ *   Zero on success
+ *   Negative on error
+ */
+int rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data);
+
+
+/**
+ * Calculate statistics for current time window. The period with which
+ * this function is called should be the intended sampling window width.
+ *
+ * @param bitrate_data
+ *   Bitrate statistics data pointer
+ *
+ * @param port_id
+ *   Port id to calculate statistics for
+ *
+ * @return
+ *  - Zero on success
+ *  - Negative value on error
+ */
+int rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+	uint8_t port_id);
diff --git a/lib/librte_bitratestats/rte_bitratestats_version.map b/lib/librte_bitratestats/rte_bitratestats_version.map
new file mode 100644
index 0000000..fe74544
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitratestats_version.map
@@ -0,0 +1,9 @@
+DPDK_17.05 {
+	global:
+
+	rte_stats_bitrate_calc;
+	rte_stats_bitrate_create;
+	rte_stats_bitrate_reg;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index dfe5232..858b6b6 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -100,6 +100,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
 _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE)        += -lrte_bitratestats
 
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v12 4/6] app/test-pmd: add bitrate statistics calculation
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
                   ` (2 preceding siblings ...)
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library Remy Horton
@ 2017-03-27 20:21 ` Remy Horton
  2017-03-28 15:49   ` Pattan, Reshma
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 5/6] lib: added new library for latency stats Remy Horton
                   ` (3 subsequent siblings)
  7 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-03-27 20:21 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

Calculate bitrate statistics using the bitrate stats library. The
resulting statistics can be viewed via proc_info.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/test-pmd/testpmd.c | 41 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index e04e215..72a7181 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -79,6 +79,10 @@
 #include <rte_pdump.h>
 #endif
 #include <rte_flow.h>
+#include <rte_metrics.h>
+#ifdef RTE_LIBRTE_BITRATE
+#include <rte_bitrate.h>
+#endif
 
 #include "testpmd.h"
 
@@ -323,6 +327,9 @@ uint16_t nb_rx_queue_stats_mappings = 0;
 
 unsigned max_socket = 0;
 
+/* Bitrate statistics */
+struct rte_stats_bitrates *bitrate_data;
+
 /* Forward function declarations */
 static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
 static void check_all_ports_link_status(uint32_t port_mask);
@@ -922,12 +929,32 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	struct fwd_stream **fsm;
 	streamid_t nb_fs;
 	streamid_t sm_id;
+#ifdef RTE_LIBRTE_BITRATE
+	uint64_t tics_per_1sec;
+	uint64_t tics_datum;
+	uint64_t tics_current;
+	uint8_t idx_port, cnt_ports;
+#endif
 
+#ifdef RTE_LIBRTE_BITRATE
+	cnt_ports = rte_eth_dev_count();
+	tics_datum = rte_rdtsc();
+	tics_per_1sec = rte_get_timer_hz();
+#endif
 	fsm = &fwd_streams[fc->stream_idx];
 	nb_fs = fc->stream_nb;
 	do {
 		for (sm_id = 0; sm_id < nb_fs; sm_id++)
 			(*pkt_fwd)(fsm[sm_id]);
+#ifdef RTE_LIBRTE_BITRATE
+		tics_current = rte_rdtsc();
+		if (tics_current - tics_datum >= tics_per_1sec) {
+			/* Periodic bitrate calculation */
+			for (idx_port = 0; idx_port < cnt_ports; idx_port++)
+				rte_stats_bitrate_calc(bitrate_data, idx_port);
+			tics_datum = tics_current;
+		}
+#endif
 	} while (! fc->stopped);
 }
 
@@ -2139,6 +2166,18 @@ main(int argc, char** argv)
 	FOREACH_PORT(port_id, ports)
 		rte_eth_promiscuous_enable(port_id);
 
+	/* Init metrics library */
+	rte_metrics_init(rte_socket_id());
+
+	/* Setup bitrate stats */
+#ifdef RTE_LIBRTE_BITRATE
+	bitrate_data = rte_stats_bitrate_create();
+	if (bitrate_data == NULL)
+		rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n");
+	rte_stats_bitrate_reg(bitrate_data);
+#endif
+
+
 #ifdef RTE_LIBRTE_CMDLINE
 	if (interactive == 1) {
 		if (auto_start) {
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v12 5/6] lib: added new library for latency stats
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
                   ` (3 preceding siblings ...)
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
@ 2017-03-27 20:21 ` Remy Horton
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 6/6] app/test-pmd: add latency statistics calculation Remy Horton
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-27 20:21 UTC (permalink / raw)
  To: dev; +Cc: Harry van Haaren, Thomas Monjalon, Reshma Pattan

From: Harry van Haaren <harry.van.haaren@intel.com>

Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 MAINTAINERS                                        |   4 +
 config/common_base                                 |   5 +
 doc/api/doxy-api-index.md                          |   1 +
 doc/api/doxy-api.conf                              |   1 +
 doc/guides/prog_guide/metrics_lib.rst              |  58 +++-
 doc/guides/rel_notes/release_17_02.rst             |   1 +
 doc/guides/rel_notes/release_17_05.rst             |   5 +
 lib/Makefile                                       |   1 +
 lib/librte_latencystats/Makefile                   |  56 ++++
 lib/librte_latencystats/rte_latencystats.c         | 366 +++++++++++++++++++++
 lib/librte_latencystats/rte_latencystats.h         | 154 +++++++++
 .../rte_latencystats_version.map                   |  11 +
 mk/rte.app.mk                                      |   2 +-
 13 files changed, 662 insertions(+), 3 deletions(-)
 create mode 100644 lib/librte_latencystats/Makefile
 create mode 100644 lib/librte_latencystats/rte_latencystats.c
 create mode 100644 lib/librte_latencystats/rte_latencystats.h
 create mode 100644 lib/librte_latencystats/rte_latencystats_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 9045454..fac3237 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -634,6 +634,10 @@ Bit-rate statistics
 M: Remy Horton <remy.horton@intel.com>
 F: lib/librte_bitratestats/
 
+Latency statistics
+M: Reshma Pattan <reshma.pattan@intel.com>
+F: lib/librte_latencystats/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index e6163eb..f35b938 100644
--- a/config/common_base
+++ b/config/common_base
@@ -640,3 +640,8 @@ CONFIG_RTE_APP_CRYPTO_PERF=y
 # Compile the bitrate statistics library
 #
 CONFIG_RTE_LIBRTE_BITRATE=y
+
+#
+# Compile the latency statistics library
+#
+CONFIG_RTE_LIBRTE_LATENCY_STATS=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 8492bce..9d1818c 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -158,4 +158,5 @@ There are many libraries, so their headers may be grouped by topics:
   [keepalive]          (@ref rte_keepalive.h),
   [device metrics]     (@ref rte_metrics.h),
   [bitrate statistics] (@ref rte_bitrate.h),
+  [latency statistics] (@ref rte_latencystats.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index c4b3b68..5babafa 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -49,6 +49,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_jobstats \
                           lib/librte_kni \
                           lib/librte_kvargs \
+                          lib/librte_latencystats \
                           lib/librte_lpm \
                           lib/librte_mbuf \
                           lib/librte_mempool \
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
index 1c2a28f..702c29d 100644
--- a/doc/guides/prog_guide/metrics_lib.rst
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -201,8 +201,8 @@ statistics can be obtained by querying the metrics library.
 Initialization
 ~~~~~~~~~~~~~~
 
-Before it is used the bit-rate statistics library has to be initialised
-by calling ``rte_stats_bitrate_create()``, which will return a bit-rate
+Before the library can be used, it has to be initialised by calling
+``rte_stats_bitrate_create()``, which will return a bit-rate
 calculation object. Since the bit-rate library uses the metrics library
 to report the calculated statistics, the bit-rate library then needs to
 register the calculated statistics with the metrics library. This is
@@ -243,3 +243,57 @@ desired, this function should be called once a second.
 	    }
         /* ... */
     }
+
+
+Latency statistics library
+--------------------------
+
+The latency statistics library calculates the latency of packet
+processing by a DPDK application, reporting the minimum, average,
+and maximum nano-seconds that packet processing takes, as well as
+the jitter in processing delay. These statistics are then reported
+via the metrics library using the following names:
+
+    - ``min_latency_ns``: Minimum processing latency (nano-seconds)
+    - ``avg_latency_ns``:  Average  processing latency (nano-seconds)
+    - ``mac_latency_ns``:  Maximum  processing latency (nano-seconds)
+    - ``jitter_ns``: Variance in processing latency (nano-seconds)
+
+Once initialised and clocked at the appropriate frequency, these
+statistics can be obtained by querying the metrics library.
+
+Initialization
+~~~~~~~~~~~~~~
+
+Before the library can be used, it has to be initialised by calling
+``rte_latencystats_init()``.
+
+.. code-block:: c
+
+    lcoreid_t latencystats_lcore_id = -1;
+
+    int ret = rte_latencystats_init(1, NULL);
+    if (ret)
+        rte_exit(EXIT_FAILURE, "Could not allocate latency data.\n");
+
+
+Triggering statistic updates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The ``rte_latencystats_update()`` function needs to be called
+periodically so that latency statistics can be updated.
+
+.. code-block:: c
+
+    if (latencystats_lcore_id == rte_lcore_id())
+        rte_latencystats_update();
+
+Library shutdown
+~~~~~~~~~~~~~~~~
+
+When finished, ``rte_latencystats_uninit()`` needs to be called to
+de-initialise the latency library.
+
+.. code-block:: c
+
+    rte_latencystats_uninit();
diff --git a/doc/guides/rel_notes/release_17_02.rst b/doc/guides/rel_notes/release_17_02.rst
index 63786df..05764a0 100644
--- a/doc/guides/rel_notes/release_17_02.rst
+++ b/doc/guides/rel_notes/release_17_02.rst
@@ -365,6 +365,7 @@ The libraries prepended with a plus sign were incremented in this version.
      librte_jobstats.so.1
      librte_kni.so.2
      librte_kvargs.so.1
+   + librte_latencystats.so.1
      librte_lpm.so.2
      librte_mbuf.so.2
      librte_mempool.so.2
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index f1b83bc..9db79a8 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -88,6 +88,11 @@ Resolved Issues
   A library that can be used to calculate device bit-rates. Calculated
   bitrates are reported using the metrics library.
 
+* **Added latency stats library.**
+
+  A library that measures packet latency. The collected statistics are jitter
+  and latency. For latency the minimum, average, and maximum is measured.
+
 
 EAL
 ~~~
diff --git a/lib/Makefile b/lib/Makefile
index ecc54c0..78cba3e 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -51,6 +51,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += librte_ip_frag
 DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
 DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
 DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
+DIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += librte_latencystats
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
 DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
diff --git a/lib/librte_latencystats/Makefile b/lib/librte_latencystats/Makefile
new file mode 100644
index 0000000..fd145d3
--- /dev/null
+++ b/lib/librte_latencystats/Makefile
@@ -0,0 +1,56 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_latencystats.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+LDLIBS += -lm
+LDLIBS += -lpthread
+
+EXPORT_MAP := rte_latencystats_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) := rte_latencystats.c
+
+# install this header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_LATENCY_STATS)-include := rte_latencystats.h
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_metrics
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_latencystats/rte_latencystats.c b/lib/librte_latencystats/rte_latencystats.c
new file mode 100644
index 0000000..5334b8b
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats.c
@@ -0,0 +1,366 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <sys/types.h>
+#include <stdbool.h>
+#include <math.h>
+
+#include <rte_mbuf.h>
+#include <rte_log.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_metrics.h>
+#include <rte_memzone.h>
+#include <rte_lcore.h>
+#include <rte_timer.h>
+
+#include "rte_latencystats.h"
+
+/** Nano seconds per second */
+#define NS_PER_SEC 1E9
+
+/** Clock cycles per nano second */
+static uint64_t
+latencystat_cycles_per_ns(void)
+{
+	return rte_get_timer_hz() / NS_PER_SEC;
+}
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_LATENCY_STATS RTE_LOGTYPE_USER1
+
+static const char *MZ_RTE_LATENCY_STATS = "rte_latencystats";
+static int latency_stats_index;
+static uint64_t samp_intvl;
+static uint64_t timer_tsc;
+static uint64_t prev_tsc;
+
+struct rte_latency_stats {
+	float min_latency; /**< Minimum latency in nano seconds */
+	float avg_latency; /**< Average latency in nano seconds */
+	float max_latency; /**< Maximum latency in nano seconds */
+	float jitter; /** Latency variation */
+};
+
+static struct rte_latency_stats *glob_stats;
+
+struct rxtx_cbs {
+	struct rte_eth_rxtx_callback *cb;
+};
+
+static struct rxtx_cbs rx_cbs[RTE_MAX_ETHPORTS][RTE_MAX_QUEUES_PER_PORT];
+static struct rxtx_cbs tx_cbs[RTE_MAX_ETHPORTS][RTE_MAX_QUEUES_PER_PORT];
+
+struct latency_stats_nameoff {
+	char name[RTE_ETH_XSTATS_NAME_SIZE];
+	unsigned int offset;
+};
+
+static const struct latency_stats_nameoff lat_stats_strings[] = {
+	{"min_latency_ns", offsetof(struct rte_latency_stats, min_latency)},
+	{"avg_latency_ns", offsetof(struct rte_latency_stats, avg_latency)},
+	{"max_latency_ns", offsetof(struct rte_latency_stats, max_latency)},
+	{"jitter_ns", offsetof(struct rte_latency_stats, jitter)},
+};
+
+#define NUM_LATENCY_STATS (sizeof(lat_stats_strings) / \
+				sizeof(lat_stats_strings[0]))
+
+int32_t
+rte_latencystats_update(void)
+{
+	unsigned int i;
+	float *stats_ptr = NULL;
+	uint64_t values[NUM_LATENCY_STATS] = {0};
+	int ret;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++) {
+		stats_ptr = RTE_PTR_ADD(glob_stats,
+				lat_stats_strings[i].offset);
+		values[i] = (uint64_t)floor((*stats_ptr)/
+				latencystat_cycles_per_ns());
+	}
+
+	ret = rte_metrics_update_values(RTE_METRICS_GLOBAL,
+					latency_stats_index,
+					values, NUM_LATENCY_STATS);
+	if (ret < 0)
+		RTE_LOG(INFO, LATENCY_STATS, "Failed to push the stats\n");
+
+	return ret;
+}
+
+static void
+rte_latencystats_fill_values(struct rte_metric_value *values)
+{
+	unsigned int i;
+	float *stats_ptr = NULL;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++) {
+		stats_ptr = RTE_PTR_ADD(glob_stats,
+				lat_stats_strings[i].offset);
+		values[i].key = i;
+		values[i].value = (uint64_t)floor((*stats_ptr)/
+						latencystat_cycles_per_ns());
+	}
+}
+
+static uint16_t
+add_time_stamps(uint8_t pid __rte_unused,
+		uint16_t qid __rte_unused,
+		struct rte_mbuf **pkts,
+		uint16_t nb_pkts,
+		uint16_t max_pkts __rte_unused,
+		void *user_cb __rte_unused)
+{
+	unsigned int i;
+	uint64_t diff_tsc, now;
+
+	/*
+	 * For every sample interval,
+	 * time stamp is marked on one received packet.
+	 */
+	now = rte_rdtsc();
+	for (i = 0; i < nb_pkts; i++) {
+		diff_tsc = now - prev_tsc;
+		timer_tsc += diff_tsc;
+		if (timer_tsc >= samp_intvl) {
+			/*
+			 * TBD: Mark the timestamp only
+			 * if not already marked by the
+			 * hardware or the PMD.
+			 */
+			pkts[i]->timestamp = now;
+			timer_tsc = 0;
+		}
+		prev_tsc = now;
+		now = rte_rdtsc();
+	}
+
+	return nb_pkts;
+}
+
+static uint16_t
+calc_latency(uint8_t pid __rte_unused,
+		uint16_t qid __rte_unused,
+		struct rte_mbuf **pkts,
+		uint16_t nb_pkts,
+		void *_ __rte_unused)
+{
+	unsigned int i, cnt = 0;
+	uint64_t now;
+	float latency[nb_pkts];
+	static float prev_latency;
+	/*
+	 * Alpha represents degree of weighting decrease in EWMA,
+	 * a constant smoothing factor between 0 and 1. The value
+	 * is used below for measuring average latency.
+	 */
+	const float alpha = 0.2;
+
+	now = rte_rdtsc();
+	for (i = 0; i < nb_pkts; i++) {
+		if (pkts[i]->timestamp)
+			latency[cnt++] = now - pkts[i]->timestamp;
+	}
+
+	for (i = 0; i < cnt; i++) {
+		/*
+		 * The jitter is calculated as statistical mean of interpacket
+		 * delay variation. The "jitter estimate" is computed by taking
+		 * the absolute values of the ipdv sequence and applying an
+		 * exponential filter with parameter 1/16 to generate the
+		 * estimate. i.e J=J+(|D(i-1,i)|-J)/16. Where J is jitter,
+		 * D(i-1,i) is difference in latency of two consecutive packets
+		 * i-1 and i.
+		 * Reference: Calculated as per RFC 5481, sec 4.1,
+		 * RFC 3393 sec 4.5, RFC 1889 sec.
+		 */
+		glob_stats->jitter +=  (abs(prev_latency - latency[i])
+					- glob_stats->jitter)/16;
+		if (glob_stats->min_latency == 0)
+			glob_stats->min_latency = latency[i];
+		else if (latency[i] < glob_stats->min_latency)
+			glob_stats->min_latency = latency[i];
+		else if (latency[i] > glob_stats->max_latency)
+			glob_stats->max_latency = latency[i];
+		/*
+		 * The average latency is measured using exponential moving
+		 * average, i.e. using EWMA
+		 * https://en.wikipedia.org/wiki/Moving_average
+		 */
+		glob_stats->avg_latency +=
+			alpha * (latency[i] - glob_stats->avg_latency);
+		prev_latency = latency[i];
+	}
+
+	return nb_pkts;
+}
+
+int
+rte_latencystats_init(uint64_t app_samp_intvl,
+		rte_latency_stats_flow_type_fn user_cb)
+{
+	unsigned int i;
+	uint8_t pid;
+	uint16_t qid;
+	struct rxtx_cbs *cbs = NULL;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const char *ptr_strings[NUM_LATENCY_STATS] = {0};
+	const struct rte_memzone *mz = NULL;
+	const unsigned int flags = 0;
+
+	if (rte_memzone_lookup(MZ_RTE_LATENCY_STATS))
+		return -EEXIST;
+
+	/** Allocate stats in shared memory fo multi process support */
+	mz = rte_memzone_reserve(MZ_RTE_LATENCY_STATS, sizeof(*glob_stats),
+					rte_socket_id(), flags);
+	if (mz == NULL) {
+		RTE_LOG(ERR, LATENCY_STATS, "Cannot reserve memory: %s:%d\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	glob_stats = mz->addr;
+	samp_intvl = app_samp_intvl * latencystat_cycles_per_ns();
+
+	/** Register latency stats with stats library */
+	for (i = 0; i < NUM_LATENCY_STATS; i++)
+		ptr_strings[i] = lat_stats_strings[i].name;
+
+	latency_stats_index = rte_metrics_reg_names(ptr_strings,
+							NUM_LATENCY_STATS);
+	if (latency_stats_index < 0) {
+		RTE_LOG(DEBUG, LATENCY_STATS,
+			"Failed to register latency stats names\n");
+		return -1;
+	}
+
+	/** Register Rx/Tx callbacks */
+	for (pid = 0; pid < nb_ports; pid++) {
+		struct rte_eth_dev_info dev_info;
+		rte_eth_dev_info_get(pid, &dev_info);
+		for (qid = 0; qid < dev_info.nb_rx_queues; qid++) {
+			cbs = &rx_cbs[pid][qid];
+			cbs->cb = rte_eth_add_first_rx_callback(pid, qid,
+					add_time_stamps, user_cb);
+			if (!cbs->cb)
+				RTE_LOG(INFO, LATENCY_STATS, "Failed to "
+					"register Rx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+		for (qid = 0; qid < dev_info.nb_tx_queues; qid++) {
+			cbs = &tx_cbs[pid][qid];
+			cbs->cb =  rte_eth_add_tx_callback(pid, qid,
+					calc_latency, user_cb);
+			if (!cbs->cb)
+				RTE_LOG(INFO, LATENCY_STATS, "Failed to "
+					"register Tx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+	}
+	return 0;
+}
+
+int
+rte_latencystats_uninit(void)
+{
+	uint8_t pid;
+	uint16_t qid;
+	int ret = 0;
+	struct rxtx_cbs *cbs = NULL;
+	const uint8_t nb_ports = rte_eth_dev_count();
+
+	/** De register Rx/Tx callbacks */
+	for (pid = 0; pid < nb_ports; pid++) {
+		struct rte_eth_dev_info dev_info;
+		rte_eth_dev_info_get(pid, &dev_info);
+		for (qid = 0; qid < dev_info.nb_rx_queues; qid++) {
+			cbs = &rx_cbs[pid][qid];
+			ret = rte_eth_remove_rx_callback(pid, qid, cbs->cb);
+			if (ret)
+				RTE_LOG(INFO, LATENCY_STATS, "failed to "
+					"remove Rx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+		for (qid = 0; qid < dev_info.nb_tx_queues; qid++) {
+			cbs = &tx_cbs[pid][qid];
+			ret = rte_eth_remove_tx_callback(pid, qid, cbs->cb);
+			if (ret)
+				RTE_LOG(INFO, LATENCY_STATS, "failed to "
+					"remove Tx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+	}
+
+	return 0;
+}
+
+int
+rte_latencystats_get_names(struct rte_metric_name *names, uint16_t size)
+{
+	unsigned int i;
+
+	if (names == NULL || size < NUM_LATENCY_STATS)
+		return NUM_LATENCY_STATS;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++)
+		snprintf(names[i].name, sizeof(names[i].name),
+				"%s", lat_stats_strings[i].name);
+
+	return NUM_LATENCY_STATS;
+}
+
+int
+rte_latencystats_get(struct rte_metric_value *values, uint16_t size)
+{
+	if (size < NUM_LATENCY_STATS || values == NULL)
+		return NUM_LATENCY_STATS;
+
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+		const struct rte_memzone *mz;
+		mz = rte_memzone_lookup(MZ_RTE_LATENCY_STATS);
+		if (mz == NULL) {
+			RTE_LOG(ERR, LATENCY_STATS,
+				"Latency stats memzone not found\n");
+			return -ENOMEM;
+		}
+		glob_stats =  mz->addr;
+	}
+
+	/* Retrieve latency stats */
+	rte_latencystats_fill_values(values);
+
+	return NUM_LATENCY_STATS;
+}
diff --git a/lib/librte_latencystats/rte_latencystats.h b/lib/librte_latencystats/rte_latencystats.h
new file mode 100644
index 0000000..28c6dcf
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats.h
@@ -0,0 +1,154 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_LATENCYSTATS_H_
+#define _RTE_LATENCYSTATS_H_
+
+/**
+ * @file
+ * RTE latency stats
+ *
+ * library to provide application and flow based latency stats.
+ */
+
+#include <rte_metrics.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  Note: This function pointer is for future flow based latency stats
+ *  implementation.
+ *
+ * Function type used for identifting flow types of a Rx packet.
+ *
+ * The callback function is called on Rx for each packet.
+ * This function is used for flow based latency calculations.
+ *
+ * @param pkt
+ *   Packet that has to be identified with its flow types.
+ * @param user_param
+ *   The arbitrary user parameter passed in by the application when
+ *   the callback was originally configured.
+ * @return
+ *   The flow_mask, representing the multiple flow types of a packet.
+ */
+typedef uint16_t (*rte_latency_stats_flow_type_fn)(struct rte_mbuf *pkt,
+							void *user_param);
+
+/**
+ *  Registers Rx/Tx callbacks for each active port, queue.
+ *
+ * @param samp_intvl
+ *  Sampling time period in nano seconds, at which packet
+ *  should be marked with time stamp.
+ * @param user_cb
+ *  Note: This param is for future flow based latency stats
+ *  implementation.
+ *  User callback to be called to get flow types of a packet.
+ *  Used for flow based latency calculation.
+ *  If the value is NULL, global stats will be calculated,
+ *  else flow based latency stats will be calculated.
+ *  For now just pass on the NULL value to this param.
+ *  @return
+ *   -1     : On error
+ *   -ENOMEM: On error
+ *    0     : On success
+ */
+int rte_latencystats_init(uint64_t samp_intvl,
+			rte_latency_stats_flow_type_fn user_cb);
+
+/**
+ * Calculates the latency and jitter values internally, exposing the updated
+ * values via *rte_latencystats_get* or the rte_metrics API.
+ * @return:
+ *  0      : on Success
+ *  < 0    : Error in updating values.
+ */
+int32_t rte_latencystats_update(void);
+
+/**
+ *  Removes registered Rx/Tx callbacks for each active port, queue.
+ *
+ *  @return
+ *   -1: On error
+ *    0: On success
+ */
+int rte_latencystats_uninit(void);
+
+/**
+ * Retrieve names of latency statistics
+ *
+ * @param names
+ *  Block of memory to insert names into. Must be at least size in capacity.
+ *  If set to NULL, function returns required capacity.
+ * @param size
+ *  Capacity of latency stats names (number of names).
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ */
+int rte_latencystats_get_names(struct rte_metric_name *names,
+				uint16_t size);
+
+/**
+ * Retrieve latency statistics.
+ *
+ * @param values
+ *   A pointer to a table of structure of type *rte_metric_value*
+ *   to be filled with latency statistics ids and values.
+ *   This parameter can be set to NULL if size is 0.
+ * @param size
+ *   The size of the stats table, which should be large enough to store
+ *   all the latency stats.
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   -ENOMEM: On failure.
+ */
+int rte_latencystats_get(struct rte_metric_value *values,
+			uint16_t size);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_LATENCYSTATS_H_ */
diff --git a/lib/librte_latencystats/rte_latencystats_version.map b/lib/librte_latencystats/rte_latencystats_version.map
new file mode 100644
index 0000000..ac8403e
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats_version.map
@@ -0,0 +1,11 @@
+DPDK_17.05 {
+	global:
+
+	rte_latencystats_get;
+	rte_latencystats_get_names;
+	rte_latencystats_init;
+	rte_latencystats_uninit;
+	rte_latencystats_update;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 858b6b6..ad1f8af 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -101,7 +101,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
 _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
 _LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE)        += -lrte_bitratestats
-
+_LDLIBS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS)  += -lrte_latencystats
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v12 6/6] app/test-pmd: add latency statistics calculation
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
                   ` (4 preceding siblings ...)
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 5/6] lib: added new library for latency stats Remy Horton
@ 2017-03-27 20:21 ` Remy Horton
  2017-03-27 21:03 ` [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Stephen Hemminger
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
  7 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-27 20:21 UTC (permalink / raw)
  To: dev; +Cc: Harry van Haaren, Thomas Monjalon, Reshma Pattan

From: Harry van Haaren <harry.van.haaren@intel.com>

This patch adds latency stats commandline argument to testpmd,
allowing to specify the lcore to use for latencystats updates.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/test-pmd/parameters.c | 20 +++++++++++++++++++-
 app/test-pmd/testpmd.c    | 37 +++++++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.h    |  6 +++++-
 3 files changed, 61 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 28db8cd..30b60ba 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -149,6 +149,10 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	printf("  --latencystats=N: enable latency and jitter statistcs "
+	       "monitoring on lcore id N.\n");
+#endif
 	printf("  --crc-strip: enable CRC stripping by hardware.\n");
 	printf("  --enable-lro: enable large receive offload.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
@@ -526,6 +530,7 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
+		{ "latencystats",               1, 0, 0 },
 		{ "crc-strip",                  0, 0, 0 },
 		{ "enable-lro",                 0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
@@ -766,6 +771,19 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
+#ifdef RTE_LIBRTE_LATENCY_STATS
+			if (!strcmp(lgopts[opt_idx].name,
+				    "latencystats")) {
+				n = atoi(optarg);
+				if (n >= 0) {
+					latencystats_lcore_id = (lcoreid_t) n;
+					latencystats_enabled = 1;
+				} else
+					rte_exit(EXIT_FAILURE,
+						 "invalid lcore id %d for latencystats"
+						 " must be >= 0\n", n);
+			}
+#endif
 			if (!strcmp(lgopts[opt_idx].name, "crc-strip"))
 				rx_mode.hw_strip_crc = 1;
 			if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 72a7181..171e1b4 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -83,6 +83,10 @@
 #ifdef RTE_LIBRTE_BITRATE
 #include <rte_bitrate.h>
 #endif
+#include <rte_metrics.h>
+#ifdef RTE_LIBRTE_LATENCY_STATS
+#include <rte_latencystats.h>
+#endif
 
 #include "testpmd.h"
 
@@ -276,6 +280,20 @@ uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
 
 #endif
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+
+/*
+ * Set when latency stats is enabled in the commandline
+ */
+uint8_t latencystats_enabled;
+
+/*
+ * Lcore ID to serive latency statistics.
+ */
+lcoreid_t latencystats_lcore_id = -1;
+
+#endif
+
 /*
  * Ethernet device configuration.
  */
@@ -955,6 +973,11 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 			tics_datum = tics_current;
 		}
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		if (latencystats_lcore_id == rte_lcore_id())
+			rte_latencystats_update();
+#endif
+
 	} while (! fc->stopped);
 }
 
@@ -2108,6 +2131,9 @@ signal_handler(int signum)
 		/* uninitialize packet capture framework */
 		rte_pdump_uninit();
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		rte_latencystats_uninit();
+#endif
 		force_quit();
 		/* exit with the expected status */
 		signal(signum, SIG_DFL);
@@ -2169,6 +2195,17 @@ main(int argc, char** argv)
 	/* Init metrics library */
 	rte_metrics_init(rte_socket_id());
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	if (latencystats_enabled != 0) {
+		int ret = rte_latencystats_init(1, NULL);
+		if (ret)
+			printf("Warning: latencystats init()"
+				" returned error %d\n",	ret);
+		printf("Latencystats running on lcore %d\n",
+			latencystats_lcore_id);
+	}
+#endif
+
 	/* Setup bitrate stats */
 #ifdef RTE_LIBRTE_BITRATE
 	bitrate_data = rte_stats_bitrate_create();
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 8cf2860..f0652ee 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -381,6 +381,10 @@ extern enum dcb_queue_mapping_mode dcb_q_mapping;
 extern uint16_t mbuf_data_size; /**< Mbuf data space size. */
 extern uint32_t param_total_num_mbufs;
 
+
+extern uint8_t latencystats_enabled;
+extern lcoreid_t latencystats_lcore_id;
+
 extern struct rte_fdir_conf fdir_conf;
 
 /*
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
                   ` (5 preceding siblings ...)
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 6/6] app/test-pmd: add latency statistics calculation Remy Horton
@ 2017-03-27 21:03 ` Stephen Hemminger
  2017-03-28 11:21   ` Mcnamara, John
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
  7 siblings, 1 reply; 41+ messages in thread
From: Stephen Hemminger @ 2017-03-27 21:03 UTC (permalink / raw)
  To: Remy Horton; +Cc: dev, Thomas Monjalon

On Mon, 27 Mar 2017 21:21:31 +0100
Remy Horton <remy.horton@intel.com> wrote:

> This patchset consists of three libraries: A Metrics library for
> distributing device information, a library that calculates bit-rate
> statistics, and a library that calculates latency statistics. The
> latter two libraries make use of the first library.
> 

Having more libraries is not always a good thing, why cant latency and other
information be part of one metrics library?

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting
  2017-03-27 21:03 ` [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Stephen Hemminger
@ 2017-03-28 11:21   ` Mcnamara, John
  0 siblings, 0 replies; 41+ messages in thread
From: Mcnamara, John @ 2017-03-28 11:21 UTC (permalink / raw)
  To: Stephen Hemminger, Horton, Remy; +Cc: dev, Thomas Monjalon



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Stephen Hemminger
> Sent: Monday, March 27, 2017 10:03 PM
> To: Horton, Remy <remy.horton@intel.com>
> Cc: dev@dpdk.org; Thomas Monjalon <thomas.monjalon@6wind.com>
> Subject: Re: [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting
> 
> On Mon, 27 Mar 2017 21:21:31 +0100
> Remy Horton <remy.horton@intel.com> wrote:
> 
> > This patchset consists of three libraries: A Metrics library for
> > distributing device information, a library that calculates bit-rate
> > statistics, and a library that calculates latency statistics. The
> > latter two libraries make use of the first library.
> >
> 
> Having more libraries is not always a good thing, why cant latency and
> other information be part of one metrics library?

Hi Stephen,

Technically they could be merged and from an end user point of view it
would probably be the same.

I would be concerned about doing that now, 2 days before the merge
window. 

We would be amenable to merging as is and then reworking the sub libs into
the metrics lib in the next release.

John 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library Remy Horton
@ 2017-03-28 14:14   ` Pattan, Reshma
  2017-03-28 15:00     ` Remy Horton
  0 siblings, 1 reply; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-28 14:14 UTC (permalink / raw)
  To: Horton, Remy, dev; +Cc: Thomas Monjalon

Hi,

Few nits below.

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Remy Horton
> Sent: Monday, March 27, 2017 9:22 PM
> To: dev@dpdk.org
> Cc: Thomas Monjalon <thomas.monjalon@6wind.com>
> Subject: [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library
> 
> diff --git a/doc/guides/rel_notes/release_17_02.rst
> b/doc/guides/rel_notes/release_17_02.rst
> index 357965a..8bd706f 100644
> --- a/doc/guides/rel_notes/release_17_02.rst
> +++ b/doc/guides/rel_notes/release_17_02.rst
> @@ -368,6 +368,7 @@ The libraries prepended with a plus sign were
> incremented in this version.
>       librte_mbuf.so.2
>       librte_mempool.so.2
>       librte_meter.so.1
> +   + librte_metrics.so.1

This change should go in release_17_05.rst. 

> a/lib/librte_metrics/Makefile b/lib/librte_metrics/Makefile new file mode
> 100644 index 0000000..8d6e23a
> --- /dev/null
> +++ b/lib/librte_metrics/Makefile
> @@ -0,0 +1,51 @@
> +#   BSD LICENSE
> +#
> +#   Copyright(c) 2016 Intel Corporation. All rights reserved.
> +#   All rights reserved.
> +#

Year 2017, and same for some other files too.

> +
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# library name
> +LIB = librte_metrics.a
> +
> +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)

How about adding -O3 to flags?

>int
>rte_metrics_update_values(int port_id,
>	uint16_t key,
>	const uint64_t *values,
>	uint32_t count)
>{

How about adding Null check of values .

> +int
> +rte_metrics_get_names(struct rte_metric_name *names,
> +	uint16_t capacity)
> +{
> +	struct rte_metrics_data_s *stats;
> +	const struct rte_memzone *memzone;
> +	uint16_t idx_name;
> +	int return_value;
> +
> +	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
> +	/* If not allocated, fail silently */
> +	if (memzone == NULL)
> +		return 0;
> +
> +	stats = memzone->addr;
> +	rte_spinlock_lock(&stats->lock);
> +	if (names != NULL) {

You can check names == NULL at memzone check and return instead of doing that inside lock?

> +
> +int
> +rte_metrics_get_values(int port_id,
> +	struct rte_metric_value *values,
> +	uint16_t capacity)
> +{
> +	struct rte_metrics_meta_s *entry;
> +	struct rte_metrics_data_s *stats;
> +	const struct rte_memzone *memzone;
> +	uint16_t idx_name;
> +	int return_value;
> +
> +	if (port_id != RTE_METRICS_GLOBAL &&
> +			(port_id < 0 || port_id > RTE_MAX_ETHPORTS))
> +		return -EINVAL;
> +
> +	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
> +	/* If not allocated, fail silently */
> +	if (memzone == NULL)
> +		return 0;
> +	stats = memzone->addr;
> +	rte_spinlock_lock(&stats->lock);
> +
> +	if (values != NULL) {

Can we have values == NULL check  along with memzone and return? Then remove this if check here?

> + *  - -ENOMEM: Error, maximum metrics reached  */ int
> +rte_metrics_reg_name(const char *name);
> +
> +/**
> + * Register a set of metrics.
> + *
> + * This is a bulk version of rte_metrics_reg_metrics() and aside from

Is that rte_metrics_reg_name().

> + *
> + * @return
> + *   - -ERANGE if count exceeds metric set size
> + *   - -EIO if upable to access shared metrics memory

Typo unable

Thanks,
Reshma

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library
  2017-03-28 14:14   ` Pattan, Reshma
@ 2017-03-28 15:00     ` Remy Horton
  0 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-28 15:00 UTC (permalink / raw)
  To: Pattan, Reshma, dev; +Cc: Thomas Monjalon


On 28/03/2017 15:14, Pattan, Reshma wrote:
[..]
>> +
>> +include $(RTE_SDK)/mk/rte.vars.mk
>> +
>> +# library name
>> +LIB = librte_metrics.a
>> +
>> +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
>
> How about adding -O3 to flags?

Off the top of my mind, I think such flags are added to CFLAGS 
separately. I think optimisation flags probably shouldn't be set at 
third-level makefiles such as this one.


>> +int
>> +rte_metrics_get_names(struct rte_metric_name *names,
>> +	uint16_t capacity)
>> +{
[..]
>> +	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
>> +	/* If not allocated, fail silently */
>> +	if (memzone == NULL)
>> +		return 0;
>> +
>> +	stats = memzone->addr;
>> +	rte_spinlock_lock(&stats->lock);
>> +	if (names != NULL) {
>
> You can check names == NULL at memzone check and return instead of doing that inside lock?

Since the names==NULL case still requires accessing of the protected 
memory to get the name count, don't see any gain in doing so.


>> +
>> +int
>> +rte_metrics_get_values(int port_id,
>> +	struct rte_metric_value *values,
>> +	uint16_t capacity)
>> +{
[..]
>> +	if (values != NULL) {
>
> Can we have values == NULL check  along with memzone and return? Then remove this if check here?

Same as rte_metrics_get_names() above.

Other changes noted. Will send out v12 either tonight or tomorrow.

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library Remy Horton
@ 2017-03-28 15:30   ` Pattan, Reshma
  2017-03-28 15:45     ` Remy Horton
  0 siblings, 1 reply; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-28 15:30 UTC (permalink / raw)
  To: Horton, Remy, dev; +Cc: Thomas Monjalon



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Remy Horton
> Sent: Monday, March 27, 2017 9:22 PM
> To: dev@dpdk.org
> Cc: Thomas Monjalon <thomas.monjalon@6wind.com>
> Subject: [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library
> 
> This patch adds a library that calculates peak and average data-rate
> statistics. For ethernet devices. These statistics are reported using the
> metrics library.
> 
> Signed-off-by: Remy Horton <remy.horton@intel.com>
> ---
> diff --git a/doc/guides/rel_notes/release_17_02.rst
> b/doc/guides/rel_notes/release_17_02.rst
> index 8bd706f..63786df 100644
> --- a/doc/guides/rel_notes/release_17_02.rst
> +++ b/doc/guides/rel_notes/release_17_02.rst
> @@ -353,6 +353,7 @@ The libraries prepended with a plus sign were
> incremented in this version.
>  .. code-block:: diff
> 
>       librte_acl.so.2
> +   + librte_bitratestats.so.1

Should be removed here and added to 17.05.rst.

> a/lib/librte_bitratestats/Makefile b/lib/librte_bitratestats/Makefile
> new file mode 100644
> index 0000000..743b62c
> --- /dev/null
> +++ b/lib/librte_bitratestats/Makefile
> @@ -0,0 +1,53 @@
> +#   BSD LICENSE
> +#
> +#   Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
> +#   All rights reserved.
> +#

Year correction here and other places

> +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
> +

Adding -O3 flags?

> +int
> +rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data) {
> +	const char * const names[] = {
> +		"ewma_bits_in", "ewma_bits_out",
> +		"mean_bits_in", "mean_bits_out",
> +		"peak_bits_in", "peak_bits_out",
> +	};
> +	int return_value;
> +
> +	return_value = rte_metrics_reg_names(&names[0], 6);

Can we passing size of namesInstead of hard coded 6 here and in some other places below?

> +int
> +rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
> +	uint8_t port_id)
> +{
> +	/* Incoming bitrate. This is an iteratively calculated EWMA
> +	 * (Expomentially Weighted Moving Average) that uses a
> +	 * weighting factor of alpha_percent. An unsmoothed mean
> +	 * for just the current time delta is also calculated for the
> +	 * benefit of people who don't understand signal processing.
> +	 */
> +	cnt_bits = (eth_stats.ibytes - port_data->last_ibytes) << 3;
> +	port_data->last_ibytes = eth_stats.ibytes;
> +	if (cnt_bits > port_data->peak_ibits)
> +		port_data->peak_ibits = cnt_bits;
> +	delta = cnt_bits;
> +	delta -= port_data->ewma_ibits;
> +	/* The +-50 fixes integer rounding during divison */
> +	if (delta > 0)
> +		delta = (delta * alpha_percent + 50) / 100;
> +	else
> +		delta = (delta * alpha_percent - 50) / 100;
> +	port_data->ewma_ibits += delta;
> +	port_data->mean_ibits = cnt_bits;
> +
> +	/* Outgoing bitrate (also EWMA) */
> +	cnt_bits = (eth_stats.obytes - port_data->last_obytes) << 3;
> +	port_data->last_obytes = eth_stats.obytes;
> +	if (cnt_bits > port_data->peak_obits)
> +		port_data->peak_obits = cnt_bits;
> +	delta = cnt_bits;
> +	delta -= port_data->ewma_obits;
> +	delta = (delta * alpha_percent + 50) / 100;

Like input bitrate calculation, should we also add if else case for delta being < 0 and >0.

> diff --git a/lib/librte_bitratestats/rte_bitrate.h
> b/lib/librte_bitratestats/rte_bitrate.h
> new file mode 100644
> index 0000000..564e4f7
> --- /dev/null
> +++ b/lib/librte_bitratestats/rte_bitrate.h
> @@ -0,0 +1,80 @@
> +/*-

Include guards are missing for this file  #ifndef _RTE_BITRATE_H_ & #define _RTE_BITRATE_H_

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library
  2017-03-28 15:30   ` Pattan, Reshma
@ 2017-03-28 15:45     ` Remy Horton
  0 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-28 15:45 UTC (permalink / raw)
  To: Pattan, Reshma, dev; +Cc: Thomas Monjalon


On 28/03/2017 16:30, Pattan, Reshma wrote:
[..]
>> +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
>> +
>
> Adding -O3 flags?

Not here, as I don't think optimization flags should be in non top-level 
Makefiles (someone correct me if this is wrong..).

Other changes done.

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v12 4/6] app/test-pmd: add bitrate statistics calculation
  2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
@ 2017-03-28 15:49   ` Pattan, Reshma
  0 siblings, 0 replies; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-28 15:49 UTC (permalink / raw)
  To: Horton, Remy, dev; +Cc: Thomas Monjalon



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Remy Horton
> Sent: Monday, March 27, 2017 9:22 PM
> To: dev@dpdk.org
> Cc: Thomas Monjalon <thomas.monjalon@6wind.com>
> Subject: [dpdk-dev] [PATCH v12 4/6] app/test-pmd: add bitrate statistics
> calculation
> 
> ---
>  app/test-pmd/testpmd.c | 41
> ++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 40 insertions(+), 1 deletion(-)
> 
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> e04e215..72a7181 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -1,7 +1,7 @@
> +#ifdef RTE_LIBRTE_BITRATE
> +	uint64_t tics_per_1sec;
> +	uint64_t tics_datum;
> +	uint64_t tics_current;
> +	uint8_t idx_port, cnt_ports;
> +#endif
> 
The above lines and below lines can be combined in one ifdef, endif

> +#ifdef RTE_LIBRTE_BITRATE
> +	cnt_ports = rte_eth_dev_count();
> +	tics_datum = rte_rdtsc();
> +	tics_per_1sec = rte_get_timer_hz();
> +#endif

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v13 0/6] Expanded statistics reporting
  2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
                   ` (6 preceding siblings ...)
  2017-03-27 21:03 ` [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Stephen Hemminger
@ 2017-03-29 18:28 ` Remy Horton
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library Remy Horton
                     ` (7 more replies)
  7 siblings, 8 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-29 18:28 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patchset consists of three libraries: A Metrics library for
distributing device information, a library that calculates bit-rate
statistics, and a library that calculates latency statistics. The
latter two libraries make use of the first library.

Metrics Library
---------------
The Metrics library implements a mechanism by which producers can
publish numeric information for later querying by consumers.
In practice producers will typically be other libraries or
primary processes, whereas consumers will typically be applications.

Metrics themselves are statistics that are not generated by PMDs.
Metric information is populated using a push model, where producers
update the values contained within the metric library by calling an
update function on the relevant metrics. Consumers receive metric
information by querying the central metric data, which is held
in shared memory so it can also be accessed by secondary processes.

For each metric, a separate value is maintained for each port id,
and when publishing metric values the producers need to specify
which port is being updated. In addition there is a special id
RTE_METRICS_GLOBAL that is intended for global statistics that are
not associated with any individual device. Since the metrics
library is self-contained, the only restriction on port numbers is
that they are less than RTE_MAX_ETHPORTS - there is no requirement
for the ports to actually exist.

Metrics must first be registered, which is the way producers declare
the names of the metrics they will be publishing. Registration can
either be done individually, or as a group as a metric set. The
intention is for all metrics in a set to be updated in one go,
although it is also possible for metrics within a set to be updated
individually. It is up to the producers to update metrics as required.

Bit-rate statistics library
---------------------------
The bit-rate library calculates the mean, the exponentially-weighted
moving average, and peak bit-rates for each active port (i.e. network
device). These statistics are then reported via the metrics library
using the following names: mean_bits_in, mean_bits_out, ewma_bits_in,
ewma_bits_out, peak_bits_in, and peak_bits_out. The sampling window 
used for calculation is decided by the application requiring the statistics.

Latency statistics library
--------------------------
The latency statistics library calculates the port-to-port latency of
packet processing by a DPDK application, reporting the minimum, average,
and maximum nano-seconds that packet processing takes, as well as the
jitter in processing delay. These statistics are then reported via the
metrics library using the following names: min_latency_ns, avg_latency_ns,
mac_latency_ns, and jitter_ns.

This is dependent on http://dpdk.org/dev/patchwork/patch/21607/ for the
timestamp MBUF field.

For more details on the metrics library and the Bit-rate and Latency
components see the Programmer's Guide updates in the patchset.
--
v13 changes:
* Rebased to latest master (b88161be4227)
* Updated copyright years to 2017
* Some release notes were in wrong file (17.02 rather than 17.05)
* Added a missing NULL check
* Doxygen & comment spelling corrections
* Authorship of some patches changed to reflect main contributer
* EWMA calculation for inbound and outbound bitrates were subtly different
* Use sizeof() rather than magic numbers for array sizes
* The recent feb9f680cd2c ("mk: optimize directory dependencies") required
  DEPDIRS-librte_ dependency information to be added to lib/Makefile

v12 changes:
* Rebased to latest master
* Misspellings in MAINTAINERS corrected
* Removed MBUF modifications (use Olivier's MBUF rework)

v11 changes:
* Rebased
* .map references to 17.02 changed to 17.05
* Release ntoes moved to release_17_05.rst
* Bit-rate library now also gives unfiltered average

v10 changes:
* Rebased
* Relocated some config-related directives.
* Removed incorrect capitalisations in API docs.
* Formatting & detail corrections in release notes.
* Moved around struct member descriptions.
* Rewritten rte_metrics.h file description.
* Rewritten description of RTE_METRICS_GLOBAL.
* Used 'producers' and 'consumers' as terms.
* Removed markup (bold text) in Doxygen tags.
* Added programming guide section.

v9 changes:
* Updated .map files to reflect function changes in v8
* Fixed rte_malloc() of zero bytes in proc_info when no metrics exist
* Fixed rte_metrics_init not being called explicitly in testpmd

v8 changes:
* Release notes correction
* Updated copyright years
* rte_metric_init() takes socket id & must be explicitly called
* rte_metrics_reg_metric renamed to rte_metrics_reg_name()
* rte_metrics_update_metric() renamed to rte_metrics_update_value()
* Doxygen updates
* Changed malloc()/free() to rte_malloc()/rte_free()
* Removed redundant memset()
* rte_stats_bitrates_s renamed to rte_stats_bitrates_s
* Split mbuf change to own patch for visibility
* CYCLES_PER_NS now a static inline function
* latency: "hidden" pthread creation now has polling API instead.
* Struct declarations and variable definitions cleaned up
* Double initialization of the latency library now returns -EEXIST
* MAINTAINERS entry for layenctstats in correct section

v7 changes:
* RTE_METRICS_NONPORT renamed to RTE_METRICS_GLOBAL
* Multiple changes to rte_metrics.h doxygen documentation
* Split apart latency patch into lib, test-pmd, & proc_info parts
* Reordered patches by functionality
* Insufficent capacity return value changed from -ERANGE to actual size
* Cache alignment in bitrate library
* Tightened up const usage to avoid STATIC_CONST_CHAR_ARRAY warning
* Reshma reinstated as author for (now split) latency patch
* Rebase to master

v6 changes:
* Metrics display now has "Non port specific" rather than "port -1"
* Fixed sign issue in EWMA delta calculation
* Rebased to master

v5 changes:
* Updated Shared Library Versions in release notes
* Merged in Reshma's latencystats library

v4 changes:
* References to 16.11 changed to 17.02
* Fetching of non-port values was broken
* Added sanity checks to value fetching
* rte_stat_value renamed to rte_metric_value
* Corrected doxygen descriptions
* Added MAINTAINERS entries
* Added #ifdef directives to bitrate code in test-pmd

v3 changes:
* Marked rte_stats_bitrate_s as internal
* Minor integer roundoff correction
* Coding style corrections
* Removed spurious object allocation
* Changes to rte_metrics.[ch] moved from Patch 2/3 to 1/3.
* Reintroduced non-port values (RTE_METRICS_NONPORT)
* Added spinlocks to metric library
* Removed spurious test registration/update
* Added release notes entries

v2 changes:
* Uses a new metrics library rather than being part of ethdev


Remy Horton (3):
  lib: add information metrics library
  lib: add bitrate statistics library
  app/test-pmd: add bitrate statistics calculation

Reshma Pattan (3):
  app/proc_info: add metrics displaying
  lib: added new library for latency stats
  app/test-pmd: add latency statistics calculation

 MAINTAINERS                                        |  12 +
 app/proc_info/main.c                               |  79 ++++-
 app/test-pmd/parameters.c                          |  20 +-
 app/test-pmd/testpmd.c                             |  78 ++++-
 app/test-pmd/testpmd.h                             |   6 +-
 config/common_base                                 |  15 +
 doc/api/doxy-api-index.md                          |   5 +-
 doc/api/doxy-api.conf                              |   5 +-
 doc/guides/prog_guide/index.rst                    |   3 +-
 doc/guides/prog_guide/metrics_lib.rst              | 299 +++++++++++++++++
 doc/guides/rel_notes/release_17_05.rst             |  21 ++
 lib/Makefile                                       |   6 +
 lib/librte_bitratestats/Makefile                   |  53 +++
 lib/librte_bitratestats/rte_bitrate.c              | 145 +++++++++
 lib/librte_bitratestats/rte_bitrate.h              |  84 +++++
 .../rte_bitratestats_version.map                   |   9 +
 lib/librte_latencystats/Makefile                   |  56 ++++
 lib/librte_latencystats/rte_latencystats.c         | 361 +++++++++++++++++++++
 lib/librte_latencystats/rte_latencystats.h         | 154 +++++++++
 .../rte_latencystats_version.map                   |  11 +
 lib/librte_metrics/Makefile                        |  51 +++
 lib/librte_metrics/rte_metrics.c                   | 302 +++++++++++++++++
 lib/librte_metrics/rte_metrics.h                   | 240 ++++++++++++++
 lib/librte_metrics/rte_metrics_version.map         |  13 +
 mk/rte.app.mk                                      |   3 +
 25 files changed, 2023 insertions(+), 8 deletions(-)
 create mode 100644 doc/guides/prog_guide/metrics_lib.rst
 create mode 100644 lib/librte_bitratestats/Makefile
 create mode 100644 lib/librte_bitratestats/rte_bitrate.c
 create mode 100644 lib/librte_bitratestats/rte_bitrate.h
 create mode 100644 lib/librte_bitratestats/rte_bitratestats_version.map
 create mode 100644 lib/librte_latencystats/Makefile
 create mode 100644 lib/librte_latencystats/rte_latencystats.c
 create mode 100644 lib/librte_latencystats/rte_latencystats.h
 create mode 100644 lib/librte_latencystats/rte_latencystats_version.map
 create mode 100644 lib/librte_metrics/Makefile
 create mode 100644 lib/librte_metrics/rte_metrics.c
 create mode 100644 lib/librte_metrics/rte_metrics.h
 create mode 100644 lib/librte_metrics/rte_metrics_version.map

-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
@ 2017-03-29 18:28   ` Remy Horton
  2017-03-30 10:01     ` Pattan, Reshma
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 2/6] app/proc_info: add metrics displaying Remy Horton
                     ` (6 subsequent siblings)
  7 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-03-29 18:28 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.

Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 MAINTAINERS                                |   4 +
 config/common_base                         |   5 +
 doc/api/doxy-api-index.md                  |   3 +-
 doc/api/doxy-api.conf                      |   3 +-
 doc/guides/prog_guide/index.rst            |   3 +-
 doc/guides/prog_guide/metrics_lib.rst      | 180 +++++++++++++++++
 doc/guides/rel_notes/release_17_05.rst     |   9 +
 lib/Makefile                               |   2 +
 lib/librte_metrics/Makefile                |  51 +++++
 lib/librte_metrics/rte_metrics.c           | 302 +++++++++++++++++++++++++++++
 lib/librte_metrics/rte_metrics.h           | 240 +++++++++++++++++++++++
 lib/librte_metrics/rte_metrics_version.map |  13 ++
 mk/rte.app.mk                              |   1 +
 13 files changed, 813 insertions(+), 3 deletions(-)
 create mode 100644 doc/guides/prog_guide/metrics_lib.rst
 create mode 100644 lib/librte_metrics/Makefile
 create mode 100644 lib/librte_metrics/rte_metrics.c
 create mode 100644 lib/librte_metrics/rte_metrics.h
 create mode 100644 lib/librte_metrics/rte_metrics_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 0b1524d..c8b4b41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -625,6 +625,10 @@ F: lib/librte_jobstats/
 F: examples/l2fwd-jobstats/
 F: doc/guides/sample_app_ug/l2_forward_job_stats.rst
 
+Metrics
+M: Remy Horton <remy.horton@intel.com>
+F: lib/librte_metrics/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 37aa1e1..1e84c3b 100644
--- a/config/common_base
+++ b/config/common_base
@@ -506,6 +506,11 @@ CONFIG_RTE_LIBRTE_EFD=y
 CONFIG_RTE_LIBRTE_JOBSTATS=y
 
 #
+# Compile the device metrics library
+#
+CONFIG_RTE_LIBRTE_METRICS=y
+
+#
 # Compile librte_lpm
 #
 CONFIG_RTE_LIBRTE_LPM=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index eb39f69..1cbe128 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -4,7 +4,7 @@ API {#index}
 <!--
   BSD LICENSE
 
-  Copyright 2013 6WIND S.A.
+  Copyright 2013-2017 6WIND S.A.
 
   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
@@ -156,4 +156,5 @@ There are many libraries, so their headers may be grouped by topics:
   [common]             (@ref rte_common.h),
   [ABI compat]         (@ref rte_compat.h),
   [keepalive]          (@ref rte_keepalive.h),
+  [device metrics]     (@ref rte_metrics.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index fdcf13c..0562814 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -1,6 +1,6 @@
 # BSD LICENSE
 #
-# Copyright 2013 6WIND S.A.
+# Copyright 2013-2017 6WIND S.A.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -52,6 +52,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_mbuf \
                           lib/librte_mempool \
                           lib/librte_meter \
+                          lib/librte_metrics \
                           lib/librte_net \
                           lib/librte_pdump \
                           lib/librte_pipeline \
diff --git a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst
index 77f427e..ef5a02a 100644
--- a/doc/guides/prog_guide/index.rst
+++ b/doc/guides/prog_guide/index.rst
@@ -1,5 +1,5 @@
 ..  BSD LICENSE
-    Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+    Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
     All rights reserved.
 
     Redistribution and use in source and binary forms, with or without
@@ -62,6 +62,7 @@ Programmer's Guide
     packet_classif_access_ctrl
     packet_framework
     vhost_lib
+    metrics_lib
     port_hotplug_framework
     source_org
     dev_kit_build_system
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
new file mode 100644
index 0000000..87f806d
--- /dev/null
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -0,0 +1,180 @@
+..  BSD LICENSE
+    Copyright(c) 2017 Intel Corporation. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+.. _Metrics_Library:
+
+Metrics Library
+===============
+
+The Metrics library implements a mechanism by which *producers* can
+publish numeric information for later querying by *consumers*. In
+practice producers will typically be other libraries or primary
+processes, whereas consumers will typically be applications.
+
+Metrics themselves are statistics that are not generated by PMDs. Metric
+information is populated using a push model, where producers update the
+values contained within the metric library by calling an update function
+on the relevant metrics. Consumers receive metric information by querying
+the central metric data, which is held in shared memory.
+
+For each metric, a separate value is maintained for each port id, and
+when publishing metric values the producers need to specify which port is
+being updated. In addition there is a special id ``RTE_METRICS_GLOBAL``
+that is intended for global statistics that are not associated with any
+individual device. Since the metrics library is self-contained, the only
+restriction on port numbers is that they are less than ``RTE_MAX_ETHPORTS``
+- there is no requirement for the ports to actually exist.
+
+Initialising the library
+------------------------
+
+Before the library can be used, it has to be initialized by calling
+``rte_metrics_init()`` which sets up the metric store in shared memory.
+This is where producers will publish metric information to, and where
+consumers will query it from.
+
+.. code-block:: c
+
+    rte_metrics_init(rte_socket_id());
+
+This function **must** be called from a primary process, but otherwise
+producers and consumers can be in either primary or secondary processes.
+
+Registering metrics
+-------------------
+
+Metrics must first be *registered*, which is the way producers declare
+the names of the metrics they will be publishing. Registration can either
+be done individually, or a set of metrics can be registered as a group.
+Individual registration is done using ``rte_metrics_reg_name()``:
+
+.. code-block:: c
+
+    id_1 = rte_metrics_reg_name("mean_bits_in");
+    id_2 = rte_metrics_reg_name("mean_bits_out");
+    id_3 = rte_metrics_reg_name("peak_bits_in");
+    id_4 = rte_metrics_reg_name("peak_bits_out");
+
+or alternatively, a set of metrics can be registered together using
+``rte_metrics_reg_names()``:
+
+.. code-block:: c
+
+    const char * const names[] = {
+        "mean_bits_in", "mean_bits_out",
+        "peak_bits_in", "peak_bits_out",
+    };
+    id_set = rte_metrics_reg_names(&names[0], 4);
+
+If the return value is negative, it means registration failed. Otherwise
+the return value is the *key* for the metric, which is used when updating
+values. A table mapping together these key values and the metrics' names
+can be obtained using ``rte_metrics_get_names()``.
+
+Updating metric values
+----------------------
+
+Once registered, producers can update the metric for a given port using
+the ``rte_metrics_update_value()`` function. This uses the metric key
+that is returned when registering the metric, and can also be looked up
+using ``rte_metrics_get_names()``.
+
+.. code-block:: c
+
+    rte_metrics_update_value(port_id, id_1, values[0]);
+    rte_metrics_update_value(port_id, id_2, values[1]);
+    rte_metrics_update_value(port_id, id_3, values[2]);
+    rte_metrics_update_value(port_id, id_4, values[3]);
+
+if metrics were registered as a single set, they can either be updated
+individually using ``rte_metrics_update_value()``, or updated together
+using the ``rte_metrics_update_values()`` function:
+
+.. code-block:: c
+
+    rte_metrics_update_value(port_id, id_set, values[0]);
+    rte_metrics_update_value(port_id, id_set + 1, values[1]);
+    rte_metrics_update_value(port_id, id_set + 2, values[2]);
+    rte_metrics_update_value(port_id, id_set + 3, values[3]);
+
+    rte_metrics_update_values(port_id, id_set, values, 4);
+
+Note that ``rte_metrics_update_values()`` cannot be used to update
+metric values from *multiple* *sets*, as there is no guarantee two
+sets registered one after the other have contiguous id values.
+
+Querying metrics
+----------------
+
+Consumers can obtain metric values by querying the metrics library using
+the ``rte_metrics_get_values()`` function that return an array of
+``struct rte_metric_value``. Each entry within this array contains a metric
+value and its associated key. A key-name mapping can be obtained using the
+``rte_metrics_get_names()`` function that returns an array of
+``struct rte_metric_name`` that is indexed by the key. The following will
+print out all metrics for a given port:
+
+.. code-block:: c
+
+    void print_metrics() {
+        struct rte_metric_name *names;
+        int len;
+
+        len = rte_metrics_get_names(NULL, 0);
+        if (len < 0) {
+            printf("Cannot get metrics count\n");
+            return;
+        }
+        if (len == 0) {
+            printf("No metrics to display (none have been registered)\n");
+            return;
+        }
+        metrics = malloc(sizeof(struct rte_metric_value) * len);
+        names =  malloc(sizeof(struct rte_metric_name) * len);
+        if (metrics == NULL || names == NULL) {
+            printf("Cannot allocate memory\n");
+            free(metrics);
+            free(names);
+            return;
+        }
+        ret = rte_metrics_get_values(port_id, metrics, len);
+        if (ret < 0 || ret > len) {
+            printf("Cannot get metrics values\n");
+            free(metrics);
+            free(names);
+            return;
+        }
+        printf("Metrics for port %i:\n", port_id);
+        for (i = 0; i < len; i++)
+            printf("  %s: %"PRIu64"\n",
+                names[metrics[i].key].name, metrics[i].value);
+        free(metrics);
+        free(names);
+    }
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 2a045b3..731363a 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -75,6 +75,14 @@ Resolved Issues
    Also, make sure to start the actual text at the margin.
    =========================================================
 
+* **Added information metric library.**
+
+  A library that allows information metrics to be added and updated
+  by producers, typically other libraries, for later retrieval by
+  consumers such as applications. It is intended to provide a
+  reporting mechanism that is independent of other libraries such
+  as ethdev.
+
 
 EAL
 ~~~
@@ -190,6 +198,7 @@ The libraries prepended with a plus sign were incremented in this version.
      librte_mbuf.so.2
      librte_mempool.so.2
      librte_meter.so.1
+   + librte_metrics.so.1
      librte_net.so.1
      librte_pdump.so.1
      librte_pipeline.so.3
diff --git a/lib/Makefile b/lib/Makefile
index 5ad3c7c..7a69e65 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -68,6 +68,8 @@ DEPDIRS-librte_ip_frag := librte_eal librte_mempool librte_mbuf librte_ether
 DEPDIRS-librte_ip_frag += librte_hash
 DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
 DEPDIRS-librte_jobstats := librte_eal
+DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
+DEPDIRS-librte_metrics := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DEPDIRS-librte_power := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
diff --git a/lib/librte_metrics/Makefile b/lib/librte_metrics/Makefile
new file mode 100644
index 0000000..156ea95
--- /dev/null
+++ b/lib/librte_metrics/Makefile
@@ -0,0 +1,51 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_metrics.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
+
+EXPORT_MAP := rte_metrics_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_METRICS) := rte_metrics.c
+
+# Install header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_METRICS)-include += rte_metrics.h
+
+DEPDIRS-$(CONFIG_RTE_LIBRTE_METRICS) += lib/librte_eal
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_metrics/rte_metrics.c b/lib/librte_metrics/rte_metrics.c
new file mode 100644
index 0000000..e9a122c
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics.c
@@ -0,0 +1,302 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_metrics.h>
+#include <rte_lcore.h>
+#include <rte_memzone.h>
+#include <rte_spinlock.h>
+
+#define RTE_METRICS_MAX_METRICS 256
+#define RTE_METRICS_MEMZONE_NAME "RTE_METRICS"
+
+/**
+ * Internal stats metadata and value entry.
+ *
+ * @internal
+ */
+struct rte_metrics_meta_s {
+	/** Name of metric */
+	char name[RTE_METRICS_MAX_NAME_LEN];
+	/** Current value for metric */
+	uint64_t value[RTE_MAX_ETHPORTS];
+	/** Used for global metrics */
+	uint64_t global_value;
+	/** Index of next root element (zero for none) */
+	uint16_t idx_next_set;
+	/** Index of next metric in set (zero for none) */
+	uint16_t idx_next_stat;
+};
+
+/**
+ * Internal stats info structure.
+ *
+ * @internal
+ * Offsets into metadata are used instead of pointers because ASLR
+ * means that having the same physical addresses in different
+ * processes is not guaranteed.
+ */
+struct rte_metrics_data_s {
+	/**   Index of last metadata entry with valid data.
+	 * This value is not valid if cnt_stats is zero.
+	 */
+	uint16_t idx_last_set;
+	/**   Number of metrics. */
+	uint16_t cnt_stats;
+	/** Metric data memory block. */
+	struct rte_metrics_meta_s metadata[RTE_METRICS_MAX_METRICS];
+	/** Metric data access lock */
+	rte_spinlock_t lock;
+};
+
+void
+rte_metrics_init(int socket_id)
+{
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+		return;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone != NULL)
+		return;
+	memzone = rte_memzone_reserve(RTE_METRICS_MEMZONE_NAME,
+		sizeof(struct rte_metrics_data_s), socket_id, 0);
+	if (memzone == NULL)
+		rte_exit(EXIT_FAILURE, "Unable to allocate stats memzone\n");
+	stats = memzone->addr;
+	memset(stats, 0, sizeof(struct rte_metrics_data_s));
+	rte_spinlock_init(&stats->lock);
+}
+
+int
+rte_metrics_reg_name(const char *name)
+{
+	const char * const list_names[] = {name};
+
+	return rte_metrics_reg_names(list_names, 1);
+}
+
+int
+rte_metrics_reg_names(const char * const *names, uint16_t cnt_names)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	uint16_t idx_base;
+
+	/* Some sanity checks */
+	if (cnt_names < 1 || names == NULL)
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone == NULL)
+		return -EIO;
+	stats = memzone->addr;
+
+	if (stats->cnt_stats + cnt_names >= RTE_METRICS_MAX_METRICS)
+		return -ENOMEM;
+
+	rte_spinlock_lock(&stats->lock);
+
+	/* Overwritten later if this is actually first set.. */
+	stats->metadata[stats->idx_last_set].idx_next_set = stats->cnt_stats;
+
+	stats->idx_last_set = idx_base = stats->cnt_stats;
+
+	for (idx_name = 0; idx_name < cnt_names; idx_name++) {
+		entry = &stats->metadata[idx_name + stats->cnt_stats];
+		strncpy(entry->name, names[idx_name],
+			RTE_METRICS_MAX_NAME_LEN);
+		memset(entry->value, 0, sizeof(entry->value));
+		entry->idx_next_stat = idx_name + stats->cnt_stats + 1;
+	}
+	entry->idx_next_stat = 0;
+	entry->idx_next_set = 0;
+	stats->cnt_stats += cnt_names;
+
+	rte_spinlock_unlock(&stats->lock);
+
+	return idx_base;
+}
+
+int
+rte_metrics_update_value(int port_id, uint16_t key, const uint64_t value)
+{
+	return rte_metrics_update_values(port_id, key, &value, 1);
+}
+
+int
+rte_metrics_update_values(int port_id,
+	uint16_t key,
+	const uint64_t *values,
+	uint32_t count)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_metric;
+	uint16_t idx_value;
+	uint16_t cnt_setsize;
+
+	if (port_id != RTE_METRICS_GLOBAL &&
+			(port_id < 0 || port_id > RTE_MAX_ETHPORTS))
+		return -EINVAL;
+
+	if (values == NULL)
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone == NULL)
+		return -EIO;
+	stats = memzone->addr;
+
+	rte_spinlock_lock(&stats->lock);
+	idx_metric = key;
+	cnt_setsize = 1;
+	while (idx_metric < stats->cnt_stats) {
+		entry = &stats->metadata[idx_metric];
+		if (entry->idx_next_stat == 0)
+			break;
+		cnt_setsize++;
+		idx_metric++;
+	}
+	/* Check update does not cross set border */
+	if (count > cnt_setsize) {
+		rte_spinlock_unlock(&stats->lock);
+		return -ERANGE;
+	}
+
+	if (port_id == RTE_METRICS_GLOBAL)
+		for (idx_value = 0; idx_value < count; idx_value++) {
+			idx_metric = key + idx_value;
+			stats->metadata[idx_metric].global_value =
+				values[idx_value];
+		}
+	else
+		for (idx_value = 0; idx_value < count; idx_value++) {
+			idx_metric = key + idx_value;
+			stats->metadata[idx_metric].value[port_id] =
+				values[idx_value];
+		}
+	rte_spinlock_unlock(&stats->lock);
+	return 0;
+}
+
+int
+rte_metrics_get_names(struct rte_metric_name *names,
+	uint16_t capacity)
+{
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	int return_value;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	/* If not allocated, fail silently */
+	if (memzone == NULL)
+		return 0;
+
+	stats = memzone->addr;
+	rte_spinlock_lock(&stats->lock);
+	if (names != NULL) {
+		if (capacity < stats->cnt_stats) {
+			return_value = stats->cnt_stats;
+			rte_spinlock_unlock(&stats->lock);
+			return return_value;
+		}
+		for (idx_name = 0; idx_name < stats->cnt_stats; idx_name++)
+			strncpy(names[idx_name].name,
+				stats->metadata[idx_name].name,
+				RTE_METRICS_MAX_NAME_LEN);
+	}
+	return_value = stats->cnt_stats;
+	rte_spinlock_unlock(&stats->lock);
+	return return_value;
+}
+
+int
+rte_metrics_get_values(int port_id,
+	struct rte_metric_value *values,
+	uint16_t capacity)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	int return_value;
+
+	if (port_id != RTE_METRICS_GLOBAL &&
+			(port_id < 0 || port_id > RTE_MAX_ETHPORTS))
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	/* If not allocated, fail silently */
+	if (memzone == NULL)
+		return 0;
+	stats = memzone->addr;
+	rte_spinlock_lock(&stats->lock);
+
+	if (values != NULL) {
+		if (capacity < stats->cnt_stats) {
+			return_value = stats->cnt_stats;
+			rte_spinlock_unlock(&stats->lock);
+			return return_value;
+		}
+		if (port_id == RTE_METRICS_GLOBAL)
+			for (idx_name = 0;
+					idx_name < stats->cnt_stats;
+					idx_name++) {
+				entry = &stats->metadata[idx_name];
+				values[idx_name].key = idx_name;
+				values[idx_name].value = entry->global_value;
+			}
+		else
+			for (idx_name = 0;
+					idx_name < stats->cnt_stats;
+					idx_name++) {
+				entry = &stats->metadata[idx_name];
+				values[idx_name].key = idx_name;
+				values[idx_name].value = entry->value[port_id];
+			}
+	}
+	return_value = stats->cnt_stats;
+	rte_spinlock_unlock(&stats->lock);
+	return return_value;
+}
diff --git a/lib/librte_metrics/rte_metrics.h b/lib/librte_metrics/rte_metrics.h
new file mode 100644
index 0000000..fd0154f
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics.h
@@ -0,0 +1,240 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * @file
+ *
+ * DPDK Metrics module
+ *
+ * Metrics are statistics that are not generated by PMDs, and hence
+ * are better reported through a mechanism that is independent from
+ * the ethdev-based extended statistics. Providers will typically
+ * be other libraries and consumers will typically be applications.
+ *
+ * Metric information is populated using a push model, where producers
+ * update the values contained within the metric library by calling
+ * an update function on the relevant metrics. Consumers receive
+ * metric information by querying the central metric data, which is
+ * held in shared memory. Currently only bulk querying of metrics
+ * by consumers is supported.
+ */
+
+#ifndef _RTE_METRICS_H_
+#define _RTE_METRICS_H_
+
+/** Maximum length of metric name (including null-terminator) */
+#define RTE_METRICS_MAX_NAME_LEN 64
+
+/**
+ * Global metric special id.
+ *
+ * When used for the port_id parameter when calling
+ * rte_metrics_update_metric() or rte_metrics_update_metric(),
+ * the global metric, which are not associated with any specific
+ * port (i.e. device), are updated.
+ */
+#define RTE_METRICS_GLOBAL -1
+
+
+/**
+ * A name-key lookup for metrics.
+ *
+ * An array of this structure is returned by rte_metrics_get_names().
+ * The struct rte_metric_value references these names via their array index.
+ */
+struct rte_metric_name {
+	/** String describing metric */
+	char name[RTE_METRICS_MAX_NAME_LEN];
+};
+
+
+/**
+ * Metric value structure.
+ *
+ * This structure is used by rte_metrics_get_values() to return metrics,
+ * which are statistics that are not generated by PMDs. It maps a name key,
+ * which corresponds to an index in the array returned by
+ * rte_metrics_get_names().
+ */
+struct rte_metric_value {
+	/** Numeric identifier of metric. */
+	uint16_t key;
+	/** Value for metric */
+	uint64_t value;
+};
+
+
+/**
+ * Initializes metric module. This function must be called from
+ * a primary process before metrics are used.
+ *
+ * @param socket_id
+ *   Socket to use for shared memory allocation.
+ */
+void rte_metrics_init(int socket_id);
+
+/**
+ * Register a metric, making it available as a reporting parameter.
+ *
+ * Registering a metric is the way producers declare a parameter
+ * that they wish to be reported. Once registered, the associated
+ * numeric key can be obtained via rte_metrics_get_names(), which
+ * is required for updating said metric's value.
+ *
+ * @param name
+ *   Metric name
+ *
+ * @return
+ *  - Zero or positive: Success (index key of new metric)
+ *  - -EIO: Error, unable to access metrics shared memory
+ *    (rte_metrics_init() not called)
+ *  - -EINVAL: Error, invalid parameters
+ *  - -ENOMEM: Error, maximum metrics reached
+ */
+int rte_metrics_reg_name(const char *name);
+
+/**
+ * Register a set of metrics.
+ *
+ * This is a bulk version of rte_metrics_reg_names() and aside from
+ * handling multiple keys at once is functionally identical.
+ *
+ * @param names
+ *   List of metric names
+ *
+ * @param cnt_names
+ *   Number of metrics in set
+ *
+ * @return
+ *  - Zero or positive: Success (index key of start of set)
+ *  - -EIO: Error, unable to access metrics shared memory
+ *    (rte_metrics_init() not called)
+ *  - -EINVAL: Error, invalid parameters
+ *  - -ENOMEM: Error, maximum metrics reached
+ */
+int rte_metrics_reg_names(const char * const *names, uint16_t cnt_names);
+
+/**
+ * Get metric name-key lookup table.
+ *
+ * @param names
+ *   A struct rte_metric_name array of at least *capacity* in size to
+ *   receive key names. If this is NULL, function returns the required
+ *   number of elements for this array.
+ *
+ * @param capacity
+ *   Size (number of elements) of struct rte_metric_name array.
+ *   Disregarded if names is NULL.
+ *
+ * @return
+ *   - Positive value above capacity: error, *names* is too small.
+ *     Return value is required size.
+ *   - Positive value equal or less than capacity: Success. Return
+ *     value is number of elements filled in.
+ *   - Negative value: error.
+ */
+int rte_metrics_get_names(
+	struct rte_metric_name *names,
+	uint16_t capacity);
+
+/**
+ * Get metric value table.
+ *
+ * @param port_id
+ *   Port id to query
+ *
+ * @param values
+ *   A struct rte_metric_value array of at least *capacity* in size to
+ *   receive metric ids and values. If this is NULL, function returns
+ *   the required number of elements for this array.
+ *
+ * @param capacity
+ *   Size (number of elements) of struct rte_metric_value array.
+ *   Disregarded if names is NULL.
+ *
+ * @return
+ *   - Positive value above capacity: error, *values* is too small.
+ *     Return value is required size.
+ *   - Positive value equal or less than capacity: Success. Return
+ *     value is number of elements filled in.
+ *   - Negative value: error.
+ */
+int rte_metrics_get_values(
+	int port_id,
+	struct rte_metric_value *values,
+	uint16_t capacity);
+
+/**
+ * Updates a metric
+ *
+ * @param port_id
+ *   Port to update metrics for
+ * @param key
+ *   Id of metric to update
+ * @param value
+ *   New value
+ *
+ * @return
+ *   - -EIO if unable to access shared metrics memory
+ *   - Zero on success
+ */
+int rte_metrics_update_value(
+	int port_id,
+	uint16_t key,
+	const uint64_t value);
+
+/**
+ * Updates a metric set. Note that it is an error to try to
+ * update across a set boundary.
+ *
+ * @param port_id
+ *   Port to update metrics for
+ * @param key
+ *   Base id of metrics set to update
+ * @param values
+ *   Set of new values
+ * @param count
+ *   Number of new values
+ *
+ * @return
+ *   - -ERANGE if count exceeds metric set size
+ *   - -EIO if unable to access shared metrics memory
+ *   - Zero on success
+ */
+int rte_metrics_update_values(
+	int port_id,
+	uint16_t key,
+	const uint64_t *values,
+	uint32_t count);
+
+#endif
diff --git a/lib/librte_metrics/rte_metrics_version.map b/lib/librte_metrics/rte_metrics_version.map
new file mode 100644
index 0000000..4c5234c
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics_version.map
@@ -0,0 +1,13 @@
+DPDK_17.05 {
+	global:
+
+	rte_metrics_get_names;
+	rte_metrics_get_values;
+	rte_metrics_init;
+	rte_metrics_reg_name;
+	rte_metrics_reg_names;
+	rte_metrics_update_value;
+	rte_metrics_update_values;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 62a2a1a..ed3315c 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -98,6 +98,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_RING)           += -lrte_ring
 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
+_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v13 2/6] app/proc_info: add metrics displaying
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library Remy Horton
@ 2017-03-29 18:28   ` Remy Horton
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library Remy Horton
                     ` (5 subsequent siblings)
  7 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-29 18:28 UTC (permalink / raw)
  To: dev; +Cc: Reshma Pattan, Thomas Monjalon

From: Reshma Pattan <reshma.pattan@intel.com>

Modify the dpdk-procinfo process to display the newly added metrics.
Added new command line option "--metrics" to display metrics.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/proc_info/main.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)

diff --git a/app/proc_info/main.c b/app/proc_info/main.c
index ef2098d..d576b42 100644
--- a/app/proc_info/main.c
+++ b/app/proc_info/main.c
@@ -1,7 +1,7 @@
 /*
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -58,6 +58,7 @@
 #include <rte_atomic.h>
 #include <rte_branch_prediction.h>
 #include <rte_string_fns.h>
+#include <rte_metrics.h>
 
 /* Maximum long option length for option parsing. */
 #define MAX_LONG_OPT_SZ 64
@@ -77,6 +78,8 @@ static uint32_t enable_collectd_format;
 static int stdout_fd;
 /**< Host id process is running on */
 static char host_id[MAX_LONG_OPT_SZ];
+/**< Enable metrics. */
+static uint32_t enable_metrics;
 /**< Enable stats reset. */
 static uint32_t reset_stats;
 /**< Enable xstats reset. */
@@ -94,6 +97,8 @@ proc_info_usage(const char *prgname)
 		"  --stats: to display port statistics, enabled by default\n"
 		"  --xstats: to display extended port statistics, disabled by "
 			"default\n"
+		"  --metrics: to display derived metrics of the ports, disabled by "
+			"default\n"
 		"  --stats-reset: to reset port statistics\n"
 		"  --xstats-reset: to reset port extended statistics\n"
 		"  --collectd-format: to print statistics to STDOUT in expected by collectd format\n"
@@ -171,6 +176,7 @@ proc_info_parse_args(int argc, char **argv)
 		{"stats", 0, NULL, 0},
 		{"stats-reset", 0, NULL, 0},
 		{"xstats", 0, NULL, 0},
+		{"metrics", 0, NULL, 0},
 		{"xstats-reset", 0, NULL, 0},
 		{"collectd-format", 0, NULL, 0},
 		{"host-id", 0, NULL, 0},
@@ -205,6 +211,10 @@ proc_info_parse_args(int argc, char **argv)
 			else if (!strncmp(long_option[option_index].name, "xstats",
 					MAX_LONG_OPT_SZ))
 				enable_xstats = 1;
+			else if (!strncmp(long_option[option_index].name,
+					"metrics",
+					MAX_LONG_OPT_SZ))
+				enable_metrics = 1;
 			/* Reset stats */
 			if (!strncmp(long_option[option_index].name, "stats-reset",
 					MAX_LONG_OPT_SZ))
@@ -414,6 +424,67 @@ nic_xstats_clear(uint8_t port_id)
 	printf("\n  NIC extended statistics for port %d cleared\n", port_id);
 }
 
+static void
+metrics_display(int port_id)
+{
+	struct rte_metric_value *metrics;
+	struct rte_metric_name *names;
+	int len, ret;
+	static const char *nic_stats_border = "########################";
+
+	len = rte_metrics_get_names(NULL, 0);
+	if (len < 0) {
+		printf("Cannot get metrics count\n");
+		return;
+	}
+	if (len == 0) {
+		printf("No metrics to display (none have been registered)\n");
+		return;
+	}
+
+	metrics = rte_malloc("proc_info_metrics",
+		sizeof(struct rte_metric_value) * len, 0);
+	if (metrics == NULL) {
+		printf("Cannot allocate memory for metrics\n");
+		return;
+	}
+
+	names =  rte_malloc(NULL, sizeof(struct rte_metric_name) * len, 0);
+	if (names == NULL) {
+		printf("Cannot allocate memory for metrcis names\n");
+		rte_free(metrics);
+		return;
+	}
+
+	if (len != rte_metrics_get_names(names, len)) {
+		printf("Cannot get metrics names\n");
+		rte_free(metrics);
+		rte_free(names);
+		return;
+	}
+
+	if (port_id == RTE_METRICS_GLOBAL)
+		printf("###### Non port specific metrics  #########\n");
+	else
+		printf("###### metrics for port %-2d #########\n", port_id);
+	printf("%s############################\n", nic_stats_border);
+	ret = rte_metrics_get_values(port_id, metrics, len);
+	if (ret < 0 || ret > len) {
+		printf("Cannot get metrics values\n");
+		rte_free(metrics);
+		rte_free(names);
+		return;
+	}
+
+	int i;
+	for (i = 0; i < len; i++)
+		printf("%s: %"PRIu64"\n", names[i].name, metrics[i].value);
+
+	printf("%s############################\n", nic_stats_border);
+	rte_free(metrics);
+	rte_free(names);
+}
+
 int
 main(int argc, char **argv)
 {
@@ -480,8 +551,14 @@ main(int argc, char **argv)
 				nic_stats_clear(i);
 			else if (reset_xstats)
 				nic_xstats_clear(i);
+			else if (enable_metrics)
+				metrics_display(i);
 		}
 	}
 
+	/* print port independent stats */
+	if (enable_metrics)
+		metrics_display(RTE_METRICS_GLOBAL);
+
 	return 0;
 }
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library Remy Horton
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 2/6] app/proc_info: add metrics displaying Remy Horton
@ 2017-03-29 18:28   ` Remy Horton
  2017-03-30 10:04     ` Pattan, Reshma
  2017-03-30 10:08     ` Pattan, Reshma
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
                     ` (4 subsequent siblings)
  7 siblings, 2 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-29 18:28 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 MAINTAINERS                                        |   4 +
 config/common_base                                 |   5 +
 doc/api/doxy-api-index.md                          |   1 +
 doc/api/doxy-api.conf                              |   1 +
 doc/guides/prog_guide/metrics_lib.rst              |  65 +++++++++
 doc/guides/rel_notes/release_17_05.rst             |   6 +
 lib/Makefile                                       |   2 +
 lib/librte_bitratestats/Makefile                   |  53 ++++++++
 lib/librte_bitratestats/rte_bitrate.c              | 145 +++++++++++++++++++++
 lib/librte_bitratestats/rte_bitrate.h              |  84 ++++++++++++
 .../rte_bitratestats_version.map                   |   9 ++
 mk/rte.app.mk                                      |   1 +
 12 files changed, 376 insertions(+)
 create mode 100644 lib/librte_bitratestats/Makefile
 create mode 100644 lib/librte_bitratestats/rte_bitrate.c
 create mode 100644 lib/librte_bitratestats/rte_bitrate.h
 create mode 100644 lib/librte_bitratestats/rte_bitratestats_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index c8b4b41..8b01439 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -629,6 +629,10 @@ Metrics
 M: Remy Horton <remy.horton@intel.com>
 F: lib/librte_metrics/
 
+Bit-rate statistics
+M: Remy Horton <remy.horton@intel.com>
+F: lib/librte_bitratestats/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 1e84c3b..e6163eb 100644
--- a/config/common_base
+++ b/config/common_base
@@ -635,3 +635,8 @@ CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
 # Compile the crypto performance application
 #
 CONFIG_RTE_APP_CRYPTO_PERF=y
+
+#
+# Compile the bitrate statistics library
+#
+CONFIG_RTE_LIBRTE_BITRATE=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 1cbe128..18c8676 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -157,4 +157,5 @@ There are many libraries, so their headers may be grouped by topics:
   [ABI compat]         (@ref rte_compat.h),
   [keepalive]          (@ref rte_keepalive.h),
   [device metrics]     (@ref rte_metrics.h),
+  [bitrate statistics] (@ref rte_bitrate.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index 0562814..7a971b6 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -36,6 +36,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_eal/common/include \
                           lib/librte_eal/common/include/generic \
                           lib/librte_acl \
+                          lib/librte_bitratestats \
                           lib/librte_cfgfile \
                           lib/librte_cmdline \
                           lib/librte_compat \
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
index 87f806d..71c3a1b 100644
--- a/doc/guides/prog_guide/metrics_lib.rst
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -178,3 +178,68 @@ print out all metrics for a given port:
         free(metrics);
         free(names);
     }
+
+
+Bit-rate statistics library
+---------------------------
+
+The bit-rate library calculates the exponentially-weighted moving
+average and peak bit-rates for each active port (i.e. network device).
+These statistics are reported via the metrics library using the
+following names:
+
+    - ``mean_bits_in``: Average inbound bit-rate
+    - ``mean_bits_out``:  Average outbound bit-rate
+    - ``ewma_bits_in``: Average inbound bit-rate (EWMA smoothed)
+    - ``ewma_bits_out``:  Average outbound bit-rate (EWMA smoothed)
+    - ``peak_bits_in``:  Peak inbound bit-rate
+    - ``peak_bits_out``:  Peak outbound bit-rate
+
+Once initialised and clocked at the appropriate frequency, these
+statistics can be obtained by querying the metrics library.
+
+Initialization
+~~~~~~~~~~~~~~
+
+Before the library can be used, it has to be initialised by calling
+``rte_stats_bitrate_create()``, which will return a bit-rate
+calculation object. Since the bit-rate library uses the metrics library
+to report the calculated statistics, the bit-rate library then needs to
+register the calculated statistics with the metrics library. This is
+done using the helper function ``rte_stats_bitrate_reg()``.
+
+.. code-block:: c
+
+    struct rte_stats_bitrates *bitrate_data;
+
+    bitrate_data = rte_stats_bitrate_create();
+    if (bitrate_data == NULL)
+        rte_exit(EXIT_FAILURE, "Could not allocate bit-rate data.\n");
+    rte_stats_bitrate_reg(bitrate_data);
+
+Controlling the sampling rate
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Since the library works by periodic sampling but does not use an
+internal thread, the application has to periodically call
+``rte_stats_bitrate_calc()``. The frequency at which this function
+is called should be the intended sampling rate required for the
+calculated statistics. For instance if per-second statistics are
+desired, this function should be called once a second.
+
+.. code-block:: c
+
+    tics_datum = rte_rdtsc();
+    tics_per_1sec = rte_get_timer_hz();
+
+    while( 1 ) {
+        /* ... */
+        tics_current = rte_rdtsc();
+	if (tics_current - tics_datum >= tics_per_1sec) {
+	    /* Periodic bitrate calculation */
+	    for (idx_port = 0; idx_port < cnt_ports; idx_port++)
+	            rte_stats_bitrate_calc(bitrate_data, idx_port);
+		tics_datum = tics_current;
+	    }
+        /* ... */
+    }
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 731363a..e8bcbc1 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -83,6 +83,11 @@ Resolved Issues
   reporting mechanism that is independent of other libraries such
   as ethdev.
 
+* **Added bit-rate calculation library.**
+
+  A library that can be used to calculate device bit-rates. Calculated
+  bitrates are reported using the metrics library.
+
 
 EAL
 ~~~
@@ -183,6 +188,7 @@ The libraries prepended with a plus sign were incremented in this version.
 .. code-block:: diff
 
      librte_acl.so.2
+   + librte_bitratestats.so.1
      librte_cfgfile.so.2
      librte_cmdline.so.2
      librte_cryptodev.so.2
diff --git a/lib/Makefile b/lib/Makefile
index 7a69e65..785f0d3 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -70,6 +70,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
 DEPDIRS-librte_jobstats := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
 DEPDIRS-librte_metrics := librte_eal
+DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
+DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ether
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DEPDIRS-librte_power := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
diff --git a/lib/librte_bitratestats/Makefile b/lib/librte_bitratestats/Makefile
new file mode 100644
index 0000000..656b041
--- /dev/null
+++ b/lib/librte_bitratestats/Makefile
@@ -0,0 +1,53 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_bitratestats.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
+
+EXPORT_MAP := rte_bitratestats_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_BITRATE) := rte_bitrate.c
+
+# Install header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_BITRATE)-include += rte_bitrate.h
+
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_metrics
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_bitratestats/rte_bitrate.c b/lib/librte_bitratestats/rte_bitrate.c
new file mode 100644
index 0000000..1e5fb07
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitrate.c
@@ -0,0 +1,145 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_metrics.h>
+#include <rte_bitrate.h>
+
+/*
+ * Persistent bit-rate data.
+ * @internal
+ */
+struct rte_stats_bitrate {
+	uint64_t last_ibytes;
+	uint64_t last_obytes;
+	uint64_t peak_ibits;
+	uint64_t peak_obits;
+	uint64_t mean_ibits;
+	uint64_t mean_obits;
+	uint64_t ewma_ibits;
+	uint64_t ewma_obits;
+};
+
+struct rte_stats_bitrates {
+	struct rte_stats_bitrate port_stats[RTE_MAX_ETHPORTS];
+	uint16_t id_stats_set;
+};
+
+struct rte_stats_bitrates *
+rte_stats_bitrate_create(void)
+{
+	return rte_zmalloc(NULL, sizeof(struct rte_stats_bitrates),
+		RTE_CACHE_LINE_SIZE);
+}
+
+int
+rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data)
+{
+	const char * const names[] = {
+		"ewma_bits_in", "ewma_bits_out",
+		"mean_bits_in", "mean_bits_out",
+		"peak_bits_in", "peak_bits_out",
+	};
+	int return_value;
+
+	return_value = rte_metrics_reg_names(&names[0],
+		sizeof(names) / sizeof(names[0]));
+	if (return_value >= 0)
+		bitrate_data->id_stats_set = return_value;
+	return return_value;
+}
+
+int
+rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+	uint8_t port_id)
+{
+	struct rte_stats_bitrate *port_data;
+	struct rte_eth_stats eth_stats;
+	int ret_code;
+	uint64_t cnt_bits;
+	int64_t delta;
+	const int64_t alpha_percent = 20;
+	uint64_t values[6];
+
+	ret_code = rte_eth_stats_get(port_id, &eth_stats);
+	if (ret_code != 0)
+		return ret_code;
+
+	port_data = &bitrate_data->port_stats[port_id];
+
+	/* Incoming bitrate. This is an iteratively calculated EWMA
+	 * (Exponentially Weighted Moving Average) that uses a
+	 * weighting factor of alpha_percent. An unsmoothed mean
+	 * for just the current time delta is also calculated for the
+	 * benefit of people who don't understand signal processing.
+	 */
+	cnt_bits = (eth_stats.ibytes - port_data->last_ibytes) << 3;
+	port_data->last_ibytes = eth_stats.ibytes;
+	if (cnt_bits > port_data->peak_ibits)
+		port_data->peak_ibits = cnt_bits;
+	delta = cnt_bits;
+	delta -= port_data->ewma_ibits;
+	/* The +-50 fixes integer rounding during divison */
+	if (delta > 0)
+		delta = (delta * alpha_percent + 50) / 100;
+	else
+		delta = (delta * alpha_percent - 50) / 100;
+	port_data->ewma_ibits += delta;
+	port_data->mean_ibits = cnt_bits;
+
+	/* Outgoing bitrate (also EWMA) */
+	cnt_bits = (eth_stats.obytes - port_data->last_obytes) << 3;
+	port_data->last_obytes = eth_stats.obytes;
+	if (cnt_bits > port_data->peak_obits)
+		port_data->peak_obits = cnt_bits;
+	delta = cnt_bits;
+	delta -= port_data->ewma_obits;
+	if (delta > 0)
+		delta = (delta * alpha_percent + 50) / 100;
+	else
+		delta = (delta * alpha_percent - 50) / 100;
+	port_data->ewma_obits += delta;
+	port_data->mean_obits = cnt_bits;
+
+	values[0] = port_data->ewma_ibits;
+	values[1] = port_data->ewma_obits;
+	values[2] = port_data->mean_ibits;
+	values[3] = port_data->mean_obits;
+	values[4] = port_data->peak_ibits;
+	values[5] = port_data->peak_obits;
+	rte_metrics_update_values(port_id, bitrate_data->id_stats_set,
+		values, sizeof(values) / sizeof(values[0]));
+	return 0;
+}
diff --git a/lib/librte_bitratestats/rte_bitrate.h b/lib/librte_bitratestats/rte_bitrate.h
new file mode 100644
index 0000000..b9f11bd
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitrate.h
@@ -0,0 +1,84 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BITRATE_H_
+#define _RTE_BITRATE_H_
+
+/**
+ *  Bitrate statistics data structure.
+ *  This data structure is intentionally opaque.
+ */
+struct rte_stats_bitrates;
+
+
+/**
+ * Allocate a bitrate statistics structure
+ *
+ * @return
+ *   - Pointer to structure on success
+ *   - NULL on error (zmalloc failure)
+ */
+struct rte_stats_bitrates *rte_stats_bitrate_create(void);
+
+
+/**
+ * Register bitrate statistics with the metric library.
+ *
+ * @param bitrate_data
+ *   Pointer allocated by rte_stats_create()
+ *
+ * @return
+ *   Zero on success
+ *   Negative on error
+ */
+int rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data);
+
+
+/**
+ * Calculate statistics for current time window. The period with which
+ * this function is called should be the intended sampling window width.
+ *
+ * @param bitrate_data
+ *   Bitrate statistics data pointer
+ *
+ * @param port_id
+ *   Port id to calculate statistics for
+ *
+ * @return
+ *  - Zero on success
+ *  - Negative value on error
+ */
+int rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+	uint8_t port_id);
+
+#endif /* _RTE_BITRATE_H_ */
diff --git a/lib/librte_bitratestats/rte_bitratestats_version.map b/lib/librte_bitratestats/rte_bitratestats_version.map
new file mode 100644
index 0000000..fe74544
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitratestats_version.map
@@ -0,0 +1,9 @@
+DPDK_17.05 {
+	global:
+
+	rte_stats_bitrate_calc;
+	rte_stats_bitrate_create;
+	rte_stats_bitrate_reg;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index ed3315c..7104a8b 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -99,6 +99,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
 _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE)        += -lrte_bitratestats
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v13 4/6] app/test-pmd: add bitrate statistics calculation
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
                     ` (2 preceding siblings ...)
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library Remy Horton
@ 2017-03-29 18:28   ` Remy Horton
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 5/6] lib: added new library for latency stats Remy Horton
                     ` (3 subsequent siblings)
  7 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-29 18:28 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

Calculate bitrate statistics using the bitrate stats library. The
resulting statistics can be viewed via proc_info.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/test-pmd/testpmd.c | 41 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index e04e215..fc96f36 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -79,6 +79,10 @@
 #include <rte_pdump.h>
 #endif
 #include <rte_flow.h>
+#include <rte_metrics.h>
+#ifdef RTE_LIBRTE_BITRATE
+#include <rte_bitrate.h>
+#endif
 
 #include "testpmd.h"
 
@@ -323,6 +327,9 @@ uint16_t nb_rx_queue_stats_mappings = 0;
 
 unsigned max_socket = 0;
 
+/* Bitrate statistics */
+struct rte_stats_bitrates *bitrate_data;
+
 /* Forward function declarations */
 static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
 static void check_all_ports_link_status(uint32_t port_mask);
@@ -922,12 +929,30 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	struct fwd_stream **fsm;
 	streamid_t nb_fs;
 	streamid_t sm_id;
-
+#ifdef RTE_LIBRTE_BITRATE
+	uint64_t tics_per_1sec;
+	uint64_t tics_datum;
+	uint64_t tics_current;
+	uint8_t idx_port, cnt_ports;
+
+	cnt_ports = rte_eth_dev_count();
+	tics_datum = rte_rdtsc();
+	tics_per_1sec = rte_get_timer_hz();
+#endif
 	fsm = &fwd_streams[fc->stream_idx];
 	nb_fs = fc->stream_nb;
 	do {
 		for (sm_id = 0; sm_id < nb_fs; sm_id++)
 			(*pkt_fwd)(fsm[sm_id]);
+#ifdef RTE_LIBRTE_BITRATE
+		tics_current = rte_rdtsc();
+		if (tics_current - tics_datum >= tics_per_1sec) {
+			/* Periodic bitrate calculation */
+			for (idx_port = 0; idx_port < cnt_ports; idx_port++)
+				rte_stats_bitrate_calc(bitrate_data, idx_port);
+			tics_datum = tics_current;
+		}
+#endif
 	} while (! fc->stopped);
 }
 
@@ -2139,6 +2164,18 @@ main(int argc, char** argv)
 	FOREACH_PORT(port_id, ports)
 		rte_eth_promiscuous_enable(port_id);
 
+	/* Init metrics library */
+	rte_metrics_init(rte_socket_id());
+
+	/* Setup bitrate stats */
+#ifdef RTE_LIBRTE_BITRATE
+	bitrate_data = rte_stats_bitrate_create();
+	if (bitrate_data == NULL)
+		rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n");
+	rte_stats_bitrate_reg(bitrate_data);
+#endif
+
+
 #ifdef RTE_LIBRTE_CMDLINE
 	if (interactive == 1) {
 		if (auto_start) {
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v13 5/6] lib: added new library for latency stats
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
                     ` (3 preceding siblings ...)
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
@ 2017-03-29 18:28   ` Remy Horton
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 6/6] app/test-pmd: add latency statistics calculation Remy Horton
                     ` (2 subsequent siblings)
  7 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-29 18:28 UTC (permalink / raw)
  To: dev; +Cc: Reshma Pattan, Thomas Monjalon, Harry van Haaren

From: Reshma Pattan <reshma.pattan@intel.com>

Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 MAINTAINERS                                        |   4 +
 config/common_base                                 |   5 +
 doc/api/doxy-api-index.md                          |   1 +
 doc/api/doxy-api.conf                              |   1 +
 doc/guides/prog_guide/metrics_lib.rst              |  54 +++
 doc/guides/rel_notes/release_17_05.rst             |   6 +
 lib/Makefile                                       |   2 +
 lib/librte_latencystats/Makefile                   |  56 ++++
 lib/librte_latencystats/rte_latencystats.c         | 361 +++++++++++++++++++++
 lib/librte_latencystats/rte_latencystats.h         | 154 +++++++++
 .../rte_latencystats_version.map                   |  11 +
 mk/rte.app.mk                                      |   1 +
 12 files changed, 656 insertions(+)
 create mode 100644 lib/librte_latencystats/Makefile
 create mode 100644 lib/librte_latencystats/rte_latencystats.c
 create mode 100644 lib/librte_latencystats/rte_latencystats.h
 create mode 100644 lib/librte_latencystats/rte_latencystats_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 8b01439..2bc114b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -633,6 +633,10 @@ Bit-rate statistics
 M: Remy Horton <remy.horton@intel.com>
 F: lib/librte_bitratestats/
 
+Latency statistics
+M: Reshma Pattan <reshma.pattan@intel.com>
+F: lib/librte_latencystats/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index e6163eb..f35b938 100644
--- a/config/common_base
+++ b/config/common_base
@@ -640,3 +640,8 @@ CONFIG_RTE_APP_CRYPTO_PERF=y
 # Compile the bitrate statistics library
 #
 CONFIG_RTE_LIBRTE_BITRATE=y
+
+#
+# Compile the latency statistics library
+#
+CONFIG_RTE_LIBRTE_LATENCY_STATS=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 18c8676..6c969a3 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -158,4 +158,5 @@ There are many libraries, so their headers may be grouped by topics:
   [keepalive]          (@ref rte_keepalive.h),
   [device metrics]     (@ref rte_metrics.h),
   [bitrate statistics] (@ref rte_bitrate.h),
+  [latency statistics] (@ref rte_latencystats.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index 7a971b6..a610eb9 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -49,6 +49,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_jobstats \
                           lib/librte_kni \
                           lib/librte_kvargs \
+                          lib/librte_latencystats \
                           lib/librte_lpm \
                           lib/librte_mbuf \
                           lib/librte_mempool \
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
index 71c3a1b..702c29d 100644
--- a/doc/guides/prog_guide/metrics_lib.rst
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -243,3 +243,57 @@ desired, this function should be called once a second.
 	    }
         /* ... */
     }
+
+
+Latency statistics library
+--------------------------
+
+The latency statistics library calculates the latency of packet
+processing by a DPDK application, reporting the minimum, average,
+and maximum nano-seconds that packet processing takes, as well as
+the jitter in processing delay. These statistics are then reported
+via the metrics library using the following names:
+
+    - ``min_latency_ns``: Minimum processing latency (nano-seconds)
+    - ``avg_latency_ns``:  Average  processing latency (nano-seconds)
+    - ``mac_latency_ns``:  Maximum  processing latency (nano-seconds)
+    - ``jitter_ns``: Variance in processing latency (nano-seconds)
+
+Once initialised and clocked at the appropriate frequency, these
+statistics can be obtained by querying the metrics library.
+
+Initialization
+~~~~~~~~~~~~~~
+
+Before the library can be used, it has to be initialised by calling
+``rte_latencystats_init()``.
+
+.. code-block:: c
+
+    lcoreid_t latencystats_lcore_id = -1;
+
+    int ret = rte_latencystats_init(1, NULL);
+    if (ret)
+        rte_exit(EXIT_FAILURE, "Could not allocate latency data.\n");
+
+
+Triggering statistic updates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The ``rte_latencystats_update()`` function needs to be called
+periodically so that latency statistics can be updated.
+
+.. code-block:: c
+
+    if (latencystats_lcore_id == rte_lcore_id())
+        rte_latencystats_update();
+
+Library shutdown
+~~~~~~~~~~~~~~~~
+
+When finished, ``rte_latencystats_uninit()`` needs to be called to
+de-initialise the latency library.
+
+.. code-block:: c
+
+    rte_latencystats_uninit();
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index e8bcbc1..ad62465 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -88,6 +88,11 @@ Resolved Issues
   A library that can be used to calculate device bit-rates. Calculated
   bitrates are reported using the metrics library.
 
+* **Added latency stats library.**
+
+  A library that measures packet latency. The collected statistics are jitter
+  and latency. For latency the minimum, average, and maximum is measured.
+
 
 EAL
 ~~~
@@ -200,6 +205,7 @@ The libraries prepended with a plus sign were incremented in this version.
      librte_jobstats.so.1
      librte_kni.so.2
      librte_kvargs.so.1
+   + librte_latencystats.so.1
      librte_lpm.so.2
      librte_mbuf.so.2
      librte_mempool.so.2
diff --git a/lib/Makefile b/lib/Makefile
index 785f0d3..04d70a7 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -72,6 +72,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
 DEPDIRS-librte_metrics := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
 DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ether
+DIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += librte_latencystats
+DEPDIRS-librte_latencystats := librte_ether librte_metrics librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DEPDIRS-librte_power := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
diff --git a/lib/librte_latencystats/Makefile b/lib/librte_latencystats/Makefile
new file mode 100644
index 0000000..4b96f3d
--- /dev/null
+++ b/lib/librte_latencystats/Makefile
@@ -0,0 +1,56 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_latencystats.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+LDLIBS += -lm
+LDLIBS += -lpthread
+
+EXPORT_MAP := rte_latencystats_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) := rte_latencystats.c
+
+# install this header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_LATENCY_STATS)-include := rte_latencystats.h
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_metrics
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_latencystats/rte_latencystats.c b/lib/librte_latencystats/rte_latencystats.c
new file mode 100644
index 0000000..285b75c
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats.c
@@ -0,0 +1,361 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <sys/types.h>
+#include <stdbool.h>
+#include <math.h>
+
+#include <rte_mbuf.h>
+#include <rte_log.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_metrics.h>
+#include <rte_memzone.h>
+#include <rte_lcore.h>
+#include <rte_timer.h>
+
+#include "rte_latencystats.h"
+
+/** Nano seconds per second */
+#define NS_PER_SEC 1E9
+
+/** Clock cycles per nano second */
+static uint64_t
+latencystat_cycles_per_ns(void)
+{
+	return rte_get_timer_hz() / NS_PER_SEC;
+}
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_LATENCY_STATS RTE_LOGTYPE_USER1
+
+static const char *MZ_RTE_LATENCY_STATS = "rte_latencystats";
+static int latency_stats_index;
+static uint64_t samp_intvl;
+static uint64_t timer_tsc;
+static uint64_t prev_tsc;
+
+struct rte_latency_stats {
+	float min_latency; /**< Minimum latency in nano seconds */
+	float avg_latency; /**< Average latency in nano seconds */
+	float max_latency; /**< Maximum latency in nano seconds */
+	float jitter; /** Latency variation */
+};
+
+static struct rte_latency_stats *glob_stats;
+
+struct rxtx_cbs {
+	struct rte_eth_rxtx_callback *cb;
+};
+
+static struct rxtx_cbs rx_cbs[RTE_MAX_ETHPORTS][RTE_MAX_QUEUES_PER_PORT];
+static struct rxtx_cbs tx_cbs[RTE_MAX_ETHPORTS][RTE_MAX_QUEUES_PER_PORT];
+
+struct latency_stats_nameoff {
+	char name[RTE_ETH_XSTATS_NAME_SIZE];
+	unsigned int offset;
+};
+
+static const struct latency_stats_nameoff lat_stats_strings[] = {
+	{"min_latency_ns", offsetof(struct rte_latency_stats, min_latency)},
+	{"avg_latency_ns", offsetof(struct rte_latency_stats, avg_latency)},
+	{"max_latency_ns", offsetof(struct rte_latency_stats, max_latency)},
+	{"jitter_ns", offsetof(struct rte_latency_stats, jitter)},
+};
+
+#define NUM_LATENCY_STATS (sizeof(lat_stats_strings) / \
+				sizeof(lat_stats_strings[0]))
+
+int32_t
+rte_latencystats_update(void)
+{
+	unsigned int i;
+	float *stats_ptr = NULL;
+	uint64_t values[NUM_LATENCY_STATS] = {0};
+	int ret;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++) {
+		stats_ptr = RTE_PTR_ADD(glob_stats,
+				lat_stats_strings[i].offset);
+		values[i] = (uint64_t)floor((*stats_ptr)/
+				latencystat_cycles_per_ns());
+	}
+
+	ret = rte_metrics_update_values(RTE_METRICS_GLOBAL,
+					latency_stats_index,
+					values, NUM_LATENCY_STATS);
+	if (ret < 0)
+		RTE_LOG(INFO, LATENCY_STATS, "Failed to push the stats\n");
+
+	return ret;
+}
+
+static void
+rte_latencystats_fill_values(struct rte_metric_value *values)
+{
+	unsigned int i;
+	float *stats_ptr = NULL;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++) {
+		stats_ptr = RTE_PTR_ADD(glob_stats,
+				lat_stats_strings[i].offset);
+		values[i].key = i;
+		values[i].value = (uint64_t)floor((*stats_ptr)/
+						latencystat_cycles_per_ns());
+	}
+}
+
+static uint16_t
+add_time_stamps(uint8_t pid __rte_unused,
+		uint16_t qid __rte_unused,
+		struct rte_mbuf **pkts,
+		uint16_t nb_pkts,
+		uint16_t max_pkts __rte_unused,
+		void *user_cb __rte_unused)
+{
+	unsigned int i;
+	uint64_t diff_tsc, now;
+
+	/*
+	 * For every sample interval,
+	 * time stamp is marked on one received packet.
+	 */
+	now = rte_rdtsc();
+	for (i = 0; i < nb_pkts; i++) {
+		diff_tsc = now - prev_tsc;
+		timer_tsc += diff_tsc;
+		if (timer_tsc >= samp_intvl) {
+			pkts[i]->timestamp = now;
+			timer_tsc = 0;
+		}
+		prev_tsc = now;
+		now = rte_rdtsc();
+	}
+
+	return nb_pkts;
+}
+
+static uint16_t
+calc_latency(uint8_t pid __rte_unused,
+		uint16_t qid __rte_unused,
+		struct rte_mbuf **pkts,
+		uint16_t nb_pkts,
+		void *_ __rte_unused)
+{
+	unsigned int i, cnt = 0;
+	uint64_t now;
+	float latency[nb_pkts];
+	static float prev_latency;
+	/*
+	 * Alpha represents degree of weighting decrease in EWMA,
+	 * a constant smoothing factor between 0 and 1. The value
+	 * is used below for measuring average latency.
+	 */
+	const float alpha = 0.2;
+
+	now = rte_rdtsc();
+	for (i = 0; i < nb_pkts; i++) {
+		if (pkts[i]->timestamp)
+			latency[cnt++] = now - pkts[i]->timestamp;
+	}
+
+	for (i = 0; i < cnt; i++) {
+		/*
+		 * The jitter is calculated as statistical mean of interpacket
+		 * delay variation. The "jitter estimate" is computed by taking
+		 * the absolute values of the ipdv sequence and applying an
+		 * exponential filter with parameter 1/16 to generate the
+		 * estimate. i.e J=J+(|D(i-1,i)|-J)/16. Where J is jitter,
+		 * D(i-1,i) is difference in latency of two consecutive packets
+		 * i-1 and i.
+		 * Reference: Calculated as per RFC 5481, sec 4.1,
+		 * RFC 3393 sec 4.5, RFC 1889 sec.
+		 */
+		glob_stats->jitter +=  (abs(prev_latency - latency[i])
+					- glob_stats->jitter)/16;
+		if (glob_stats->min_latency == 0)
+			glob_stats->min_latency = latency[i];
+		else if (latency[i] < glob_stats->min_latency)
+			glob_stats->min_latency = latency[i];
+		else if (latency[i] > glob_stats->max_latency)
+			glob_stats->max_latency = latency[i];
+		/*
+		 * The average latency is measured using exponential moving
+		 * average, i.e. using EWMA
+		 * https://en.wikipedia.org/wiki/Moving_average
+		 */
+		glob_stats->avg_latency +=
+			alpha * (latency[i] - glob_stats->avg_latency);
+		prev_latency = latency[i];
+	}
+
+	return nb_pkts;
+}
+
+int
+rte_latencystats_init(uint64_t app_samp_intvl,
+		rte_latency_stats_flow_type_fn user_cb)
+{
+	unsigned int i;
+	uint8_t pid;
+	uint16_t qid;
+	struct rxtx_cbs *cbs = NULL;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const char *ptr_strings[NUM_LATENCY_STATS] = {0};
+	const struct rte_memzone *mz = NULL;
+	const unsigned int flags = 0;
+
+	if (rte_memzone_lookup(MZ_RTE_LATENCY_STATS))
+		return -EEXIST;
+
+	/** Allocate stats in shared memory fo multi process support */
+	mz = rte_memzone_reserve(MZ_RTE_LATENCY_STATS, sizeof(*glob_stats),
+					rte_socket_id(), flags);
+	if (mz == NULL) {
+		RTE_LOG(ERR, LATENCY_STATS, "Cannot reserve memory: %s:%d\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	glob_stats = mz->addr;
+	samp_intvl = app_samp_intvl * latencystat_cycles_per_ns();
+
+	/** Register latency stats with stats library */
+	for (i = 0; i < NUM_LATENCY_STATS; i++)
+		ptr_strings[i] = lat_stats_strings[i].name;
+
+	latency_stats_index = rte_metrics_reg_names(ptr_strings,
+							NUM_LATENCY_STATS);
+	if (latency_stats_index < 0) {
+		RTE_LOG(DEBUG, LATENCY_STATS,
+			"Failed to register latency stats names\n");
+		return -1;
+	}
+
+	/** Register Rx/Tx callbacks */
+	for (pid = 0; pid < nb_ports; pid++) {
+		struct rte_eth_dev_info dev_info;
+		rte_eth_dev_info_get(pid, &dev_info);
+		for (qid = 0; qid < dev_info.nb_rx_queues; qid++) {
+			cbs = &rx_cbs[pid][qid];
+			cbs->cb = rte_eth_add_first_rx_callback(pid, qid,
+					add_time_stamps, user_cb);
+			if (!cbs->cb)
+				RTE_LOG(INFO, LATENCY_STATS, "Failed to "
+					"register Rx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+		for (qid = 0; qid < dev_info.nb_tx_queues; qid++) {
+			cbs = &tx_cbs[pid][qid];
+			cbs->cb =  rte_eth_add_tx_callback(pid, qid,
+					calc_latency, user_cb);
+			if (!cbs->cb)
+				RTE_LOG(INFO, LATENCY_STATS, "Failed to "
+					"register Tx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+	}
+	return 0;
+}
+
+int
+rte_latencystats_uninit(void)
+{
+	uint8_t pid;
+	uint16_t qid;
+	int ret = 0;
+	struct rxtx_cbs *cbs = NULL;
+	const uint8_t nb_ports = rte_eth_dev_count();
+
+	/** De register Rx/Tx callbacks */
+	for (pid = 0; pid < nb_ports; pid++) {
+		struct rte_eth_dev_info dev_info;
+		rte_eth_dev_info_get(pid, &dev_info);
+		for (qid = 0; qid < dev_info.nb_rx_queues; qid++) {
+			cbs = &rx_cbs[pid][qid];
+			ret = rte_eth_remove_rx_callback(pid, qid, cbs->cb);
+			if (ret)
+				RTE_LOG(INFO, LATENCY_STATS, "failed to "
+					"remove Rx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+		for (qid = 0; qid < dev_info.nb_tx_queues; qid++) {
+			cbs = &tx_cbs[pid][qid];
+			ret = rte_eth_remove_tx_callback(pid, qid, cbs->cb);
+			if (ret)
+				RTE_LOG(INFO, LATENCY_STATS, "failed to "
+					"remove Tx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+	}
+
+	return 0;
+}
+
+int
+rte_latencystats_get_names(struct rte_metric_name *names, uint16_t size)
+{
+	unsigned int i;
+
+	if (names == NULL || size < NUM_LATENCY_STATS)
+		return NUM_LATENCY_STATS;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++)
+		snprintf(names[i].name, sizeof(names[i].name),
+				"%s", lat_stats_strings[i].name);
+
+	return NUM_LATENCY_STATS;
+}
+
+int
+rte_latencystats_get(struct rte_metric_value *values, uint16_t size)
+{
+	if (size < NUM_LATENCY_STATS || values == NULL)
+		return NUM_LATENCY_STATS;
+
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+		const struct rte_memzone *mz;
+		mz = rte_memzone_lookup(MZ_RTE_LATENCY_STATS);
+		if (mz == NULL) {
+			RTE_LOG(ERR, LATENCY_STATS,
+				"Latency stats memzone not found\n");
+			return -ENOMEM;
+		}
+		glob_stats =  mz->addr;
+	}
+
+	/* Retrieve latency stats */
+	rte_latencystats_fill_values(values);
+
+	return NUM_LATENCY_STATS;
+}
diff --git a/lib/librte_latencystats/rte_latencystats.h b/lib/librte_latencystats/rte_latencystats.h
new file mode 100644
index 0000000..6efeaf4
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats.h
@@ -0,0 +1,154 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_LATENCYSTATS_H_
+#define _RTE_LATENCYSTATS_H_
+
+/**
+ * @file
+ * RTE latency stats
+ *
+ * library to provide application and flow based latency stats.
+ */
+
+#include <rte_metrics.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  Note: This function pointer is for future flow based latency stats
+ *  implementation.
+ *
+ * Function type used for identifting flow types of a Rx packet.
+ *
+ * The callback function is called on Rx for each packet.
+ * This function is used for flow based latency calculations.
+ *
+ * @param pkt
+ *   Packet that has to be identified with its flow types.
+ * @param user_param
+ *   The arbitrary user parameter passed in by the application when
+ *   the callback was originally configured.
+ * @return
+ *   The flow_mask, representing the multiple flow types of a packet.
+ */
+typedef uint16_t (*rte_latency_stats_flow_type_fn)(struct rte_mbuf *pkt,
+							void *user_param);
+
+/**
+ *  Registers Rx/Tx callbacks for each active port, queue.
+ *
+ * @param samp_intvl
+ *  Sampling time period in nano seconds, at which packet
+ *  should be marked with time stamp.
+ * @param user_cb
+ *  Note: This param is for future flow based latency stats
+ *  implementation.
+ *  User callback to be called to get flow types of a packet.
+ *  Used for flow based latency calculation.
+ *  If the value is NULL, global stats will be calculated,
+ *  else flow based latency stats will be calculated.
+ *  For now just pass on the NULL value to this param.
+ *  @return
+ *   -1     : On error
+ *   -ENOMEM: On error
+ *    0     : On success
+ */
+int rte_latencystats_init(uint64_t samp_intvl,
+			rte_latency_stats_flow_type_fn user_cb);
+
+/**
+ * Calculates the latency and jitter values internally, exposing the updated
+ * values via *rte_latencystats_get* or the rte_metrics API.
+ * @return:
+ *  0      : on Success
+ *  < 0    : Error in updating values.
+ */
+int32_t rte_latencystats_update(void);
+
+/**
+ *  Removes registered Rx/Tx callbacks for each active port, queue.
+ *
+ *  @return
+ *   -1: On error
+ *    0: On success
+ */
+int rte_latencystats_uninit(void);
+
+/**
+ * Retrieve names of latency statistics
+ *
+ * @param names
+ *  Block of memory to insert names into. Must be at least size in capacity.
+ *  If set to NULL, function returns required capacity.
+ * @param size
+ *  Capacity of latency stats names (number of names).
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ */
+int rte_latencystats_get_names(struct rte_metric_name *names,
+				uint16_t size);
+
+/**
+ * Retrieve latency statistics.
+ *
+ * @param values
+ *   A pointer to a table of structure of type *rte_metric_value*
+ *   to be filled with latency statistics ids and values.
+ *   This parameter can be set to NULL if size is 0.
+ * @param size
+ *   The size of the stats table, which should be large enough to store
+ *   all the latency stats.
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   -ENOMEM: On failure.
+ */
+int rte_latencystats_get(struct rte_metric_value *values,
+			uint16_t size);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_LATENCYSTATS_H_ */
diff --git a/lib/librte_latencystats/rte_latencystats_version.map b/lib/librte_latencystats/rte_latencystats_version.map
new file mode 100644
index 0000000..ac8403e
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats_version.map
@@ -0,0 +1,11 @@
+DPDK_17.05 {
+	global:
+
+	rte_latencystats_get;
+	rte_latencystats_get_names;
+	rte_latencystats_init;
+	rte_latencystats_uninit;
+	rte_latencystats_update;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 7104a8b..fc0e877 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -100,6 +100,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
 _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
 _LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE)        += -lrte_bitratestats
+_LDLIBS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS)  += -lrte_latencystats
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v13 6/6] app/test-pmd: add latency statistics calculation
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
                     ` (4 preceding siblings ...)
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 5/6] lib: added new library for latency stats Remy Horton
@ 2017-03-29 18:28   ` Remy Horton
  2017-03-30 10:22     ` Pattan, Reshma
  2017-03-30 13:18   ` [dpdk-dev] [PATCH v13 0/6] Expanded statistics reporting Pattan, Reshma
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
  7 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-03-29 18:28 UTC (permalink / raw)
  To: dev; +Cc: Reshma Pattan, Thomas Monjalon, Harry van Haaren

From: Reshma Pattan <reshma.pattan@intel.com>

This patch adds latency stats commandline argument to testpmd,
allowing to specify the lcore to use for latencystats updates.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/test-pmd/parameters.c | 20 +++++++++++++++++++-
 app/test-pmd/testpmd.c    | 37 +++++++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.h    |  6 +++++-
 3 files changed, 61 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 28db8cd..30b60ba 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -149,6 +149,10 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	printf("  --latencystats=N: enable latency and jitter statistcs "
+	       "monitoring on lcore id N.\n");
+#endif
 	printf("  --crc-strip: enable CRC stripping by hardware.\n");
 	printf("  --enable-lro: enable large receive offload.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
@@ -526,6 +530,7 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
+		{ "latencystats",               1, 0, 0 },
 		{ "crc-strip",                  0, 0, 0 },
 		{ "enable-lro",                 0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
@@ -766,6 +771,19 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
+#ifdef RTE_LIBRTE_LATENCY_STATS
+			if (!strcmp(lgopts[opt_idx].name,
+				    "latencystats")) {
+				n = atoi(optarg);
+				if (n >= 0) {
+					latencystats_lcore_id = (lcoreid_t) n;
+					latencystats_enabled = 1;
+				} else
+					rte_exit(EXIT_FAILURE,
+						 "invalid lcore id %d for latencystats"
+						 " must be >= 0\n", n);
+			}
+#endif
 			if (!strcmp(lgopts[opt_idx].name, "crc-strip"))
 				rx_mode.hw_strip_crc = 1;
 			if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index fc96f36..e36b61f 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -83,6 +83,10 @@
 #ifdef RTE_LIBRTE_BITRATE
 #include <rte_bitrate.h>
 #endif
+#include <rte_metrics.h>
+#ifdef RTE_LIBRTE_LATENCY_STATS
+#include <rte_latencystats.h>
+#endif
 
 #include "testpmd.h"
 
@@ -276,6 +280,20 @@ uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
 
 #endif
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+
+/*
+ * Set when latency stats is enabled in the commandline
+ */
+uint8_t latencystats_enabled;
+
+/*
+ * Lcore ID to serive latency statistics.
+ */
+lcoreid_t latencystats_lcore_id = -1;
+
+#endif
+
 /*
  * Ethernet device configuration.
  */
@@ -953,6 +971,11 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 			tics_datum = tics_current;
 		}
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		if (latencystats_lcore_id == rte_lcore_id())
+			rte_latencystats_update();
+#endif
+
 	} while (! fc->stopped);
 }
 
@@ -2106,6 +2129,9 @@ signal_handler(int signum)
 		/* uninitialize packet capture framework */
 		rte_pdump_uninit();
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		rte_latencystats_uninit();
+#endif
 		force_quit();
 		/* exit with the expected status */
 		signal(signum, SIG_DFL);
@@ -2167,6 +2193,17 @@ main(int argc, char** argv)
 	/* Init metrics library */
 	rte_metrics_init(rte_socket_id());
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	if (latencystats_enabled != 0) {
+		int ret = rte_latencystats_init(1, NULL);
+		if (ret)
+			printf("Warning: latencystats init()"
+				" returned error %d\n",	ret);
+		printf("Latencystats running on lcore %d\n",
+			latencystats_lcore_id);
+	}
+#endif
+
 	/* Setup bitrate stats */
 #ifdef RTE_LIBRTE_BITRATE
 	bitrate_data = rte_stats_bitrate_create();
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 8cf2860..f0652ee 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -381,6 +381,10 @@ extern enum dcb_queue_mapping_mode dcb_q_mapping;
 extern uint16_t mbuf_data_size; /**< Mbuf data space size. */
 extern uint32_t param_total_num_mbufs;
 
+
+extern uint8_t latencystats_enabled;
+extern lcoreid_t latencystats_lcore_id;
+
 extern struct rte_fdir_conf fdir_conf;
 
 /*
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library Remy Horton
@ 2017-03-30 10:01     ` Pattan, Reshma
  0 siblings, 0 replies; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-30 10:01 UTC (permalink / raw)
  To: Horton, Remy; +Cc: Thomas Monjalon, dev

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Remy Horton
> Sent: Wednesday, March 29, 2017 7:29 PM
> To: dev@dpdk.org
> Cc: Thomas Monjalon <thomas.monjalon@6wind.com>
> Subject: [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library
> 

> a/lib/librte_metrics/Makefile b/lib/librte_metrics/Makefile new file mode
> 100644 index 0000000..156ea95
> --- /dev/null
> +++ b/lib/librte_metrics/Makefile
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# library name
> +LIB = librte_metrics.a
> +
> +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)

All new libraries do add -O3 flag explicitly as of now. 
Looks like higher level make files don't provide -O3 support,  because after compiling using V=1 option i.e. "make -j install T=x86_64-native-linuxapp-gcc V=1",
I don't see any -O3 flags been used for metrics library source files compilation.  So you can check the same and add the flags.

Patchwork has reported couple of warnings you can check them too.

Thanks,
Reshma

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library Remy Horton
@ 2017-03-30 10:04     ` Pattan, Reshma
  2017-03-30 10:08     ` Pattan, Reshma
  1 sibling, 0 replies; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-30 10:04 UTC (permalink / raw)
  To: Horton, Remy, dev; +Cc: Thomas Monjalon

Hi Remy,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Remy Horton
> Sent: Wednesday, March 29, 2017 7:29 PM
> To: dev@dpdk.org
> Cc: Thomas Monjalon <thomas.monjalon@6wind.com>
> Subject: [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library
> 
> +++ b/lib/librte_bitratestats/Makefile
> @@ -0,0 +1,53 @@
> +include $(RTE_SDK)/mk/rte.vars.mk
> +
> +# library name
> +LIB = librte_bitratestats.a
> +
> +CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR)
> +

Just recheck this for adding -O3. No other comments

Thanks,
Reshma

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library Remy Horton
  2017-03-30 10:04     ` Pattan, Reshma
@ 2017-03-30 10:08     ` Pattan, Reshma
  1 sibling, 0 replies; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-30 10:08 UTC (permalink / raw)
  To: Horton, Remy, dev; +Cc: Thomas Monjalon

Hi Remy,

Warning is shown in patchwork checkpatch status, you can check that too.

Thanks,
Reshma

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v13 6/6] app/test-pmd: add latency statistics calculation
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 6/6] app/test-pmd: add latency statistics calculation Remy Horton
@ 2017-03-30 10:22     ` Pattan, Reshma
  0 siblings, 0 replies; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-30 10:22 UTC (permalink / raw)
  To: Horton, Remy, dev; +Cc: Thomas Monjalon, Van Haaren, Harry

Hi,

Few nits. 

> -----Original Message-----
> From: Horton, Remy
> Sent: Wednesday, March 29, 2017 7:29 PM
> To: dev@dpdk.org
> Cc: Pattan, Reshma <reshma.pattan@intel.com>; Thomas Monjalon
> <thomas.monjalon@6wind.com>; Van Haaren, Harry
> <harry.van.haaren@intel.com>
> Subject: [PATCH v13 6/6] app/test-pmd: add latency statistics calculation
> 
> 
> diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index
> 28db8cd..30b60ba 100644
> --- a/app/test-pmd/parameters.c
> +++ b/app/test-pmd/parameters.c
> @@ -1,7 +1,7 @@
> +#ifdef RTE_LIBRTE_LATENCY_STATS
> +	printf("  --latencystats=N: enable latency and jitter statistcs "
> +	       "monitoring on lcore id N.\n"); #endif

In the above printf , we need to mention "monitoring on forwarding lcore id"

> +		{ "latencystats",               1, 0, 0 },
Do we need to add ifdef RTE_LIBRTE_LATENCY_STATS flag here also ?


> pmd/testpmd.h b/app/test-pmd/testpmd.h index 8cf2860..f0652ee 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -1,7 +1,7 @@
>  /*-

Do we need to add ifdef RTE_LIBRTE_LATENCY_STATS flag here also ?
> +
> +extern uint8_t latencystats_enabled;
> +extern lcoreid_t latencystats_lcore_id;

Thanks,
Reshma

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v13 0/6] Expanded statistics reporting
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
                     ` (5 preceding siblings ...)
  2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 6/6] app/test-pmd: add latency statistics calculation Remy Horton
@ 2017-03-30 13:18   ` Pattan, Reshma
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
  7 siblings, 0 replies; 41+ messages in thread
From: Pattan, Reshma @ 2017-03-30 13:18 UTC (permalink / raw)
  To: Horton, Remy, dev; +Cc: Thomas Monjalon



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Remy Horton
> Sent: Wednesday, March 29, 2017 7:29 PM
> To: dev@dpdk.org
> Cc: Thomas Monjalon <thomas.monjalon@6wind.com>
> Subject: [dpdk-dev] [PATCH v13 0/6] Expanded statistics reporting
> 
> This patchset consists of three libraries: A Metrics library for distributing
> device information, a library that calculates bit-rate statistics, and a library
> that calculates latency statistics. The latter two libraries make use of the first
> library.
> 
> Metrics Library
> ---------------
> The Metrics library implements a mechanism by which producers can publish
> numeric information for later querying by consumers.
> In practice producers will typically be other libraries or primary processes,
> whereas consumers will typically be applications.
> 
> Metrics themselves are statistics that are not generated by PMDs.
> Metric information is populated using a push model, where producers
> update the values contained within the metric library by calling an update
> function on the relevant metrics. Consumers receive metric information by
> querying the central metric data, which is held in shared memory so it can
> also be accessed by secondary processes.
> 
> For each metric, a separate value is maintained for each port id, and when
> publishing metric values the producers need to specify which port is being
> updated. In addition there is a special id RTE_METRICS_GLOBAL that is
> intended for global statistics that are not associated with any individual
> device. Since the metrics library is self-contained, the only restriction on port
> numbers is that they are less than RTE_MAX_ETHPORTS - there is no
> requirement for the ports to actually exist.
> 
> Metrics must first be registered, which is the way producers declare the
> names of the metrics they will be publishing. Registration can either be done
> individually, or as a group as a metric set. The intention is for all metrics in a
> set to be updated in one go, although it is also possible for metrics within a
> set to be updated individually. It is up to the producers to update metrics as
> required.
> 
> Bit-rate statistics library
> ---------------------------
> The bit-rate library calculates the mean, the exponentially-weighted moving
> average, and peak bit-rates for each active port (i.e. network device). These
> statistics are then reported via the metrics library using the following names:
> mean_bits_in, mean_bits_out, ewma_bits_in, ewma_bits_out, peak_bits_in,
> and peak_bits_out. The sampling window used for calculation is decided by
> the application requiring the statistics.
> 
> Latency statistics library
> --------------------------
> The latency statistics library calculates the port-to-port latency of packet
> processing by a DPDK application, reporting the minimum, average, and
> maximum nano-seconds that packet processing takes, as well as the jitter in
> processing delay. These statistics are then reported via the metrics library
> using the following names: min_latency_ns, avg_latency_ns, mac_latency_ns,
> and jitter_ns.
> 
> This is dependent on http://dpdk.org/dev/patchwork/patch/21607/ for the
> timestamp MBUF field.
> 
> For more details on the metrics library and the Bit-rate and Latency
> components see the Programmer's Guide updates in the patchset.
> --
> v13 changes:
> * Rebased to latest master (b88161be4227)
> * Updated copyright years to 2017
> * Some release notes were in wrong file (17.02 rather than 17.05)
> * Added a missing NULL check
> * Doxygen & comment spelling corrections
> * Authorship of some patches changed to reflect main contributer
> * EWMA calculation for inbound and outbound bitrates were subtly
> different
> * Use sizeof() rather than magic numbers for array sizes
> * The recent feb9f680cd2c ("mk: optimize directory dependencies") required
>   DEPDIRS-librte_ dependency information to be added to lib/Makefile
> 
> v12 changes:
> * Rebased to latest master
> * Misspellings in MAINTAINERS corrected
> * Removed MBUF modifications (use Olivier's MBUF rework)
> 
> v11 changes:
> * Rebased
> * .map references to 17.02 changed to 17.05
> * Release ntoes moved to release_17_05.rst
> * Bit-rate library now also gives unfiltered average
> 
> v10 changes:
> * Rebased
> * Relocated some config-related directives.
> * Removed incorrect capitalisations in API docs.
> * Formatting & detail corrections in release notes.
> * Moved around struct member descriptions.
> * Rewritten rte_metrics.h file description.
> * Rewritten description of RTE_METRICS_GLOBAL.
> * Used 'producers' and 'consumers' as terms.
> * Removed markup (bold text) in Doxygen tags.
> * Added programming guide section.
> 
> v9 changes:
> * Updated .map files to reflect function changes in v8
> * Fixed rte_malloc() of zero bytes in proc_info when no metrics exist
> * Fixed rte_metrics_init not being called explicitly in testpmd
> 
> v8 changes:
> * Release notes correction
> * Updated copyright years
> * rte_metric_init() takes socket id & must be explicitly called
> * rte_metrics_reg_metric renamed to rte_metrics_reg_name()
> * rte_metrics_update_metric() renamed to rte_metrics_update_value()
> * Doxygen updates
> * Changed malloc()/free() to rte_malloc()/rte_free()
> * Removed redundant memset()
> * rte_stats_bitrates_s renamed to rte_stats_bitrates_s
> * Split mbuf change to own patch for visibility
> * CYCLES_PER_NS now a static inline function
> * latency: "hidden" pthread creation now has polling API instead.
> * Struct declarations and variable definitions cleaned up
> * Double initialization of the latency library now returns -EEXIST
> * MAINTAINERS entry for layenctstats in correct section
> 
> v7 changes:
> * RTE_METRICS_NONPORT renamed to RTE_METRICS_GLOBAL
> * Multiple changes to rte_metrics.h doxygen documentation
> * Split apart latency patch into lib, test-pmd, & proc_info parts
> * Reordered patches by functionality
> * Insufficent capacity return value changed from -ERANGE to actual size
> * Cache alignment in bitrate library
> * Tightened up const usage to avoid STATIC_CONST_CHAR_ARRAY warning
> * Reshma reinstated as author for (now split) latency patch
> * Rebase to master
> 
> v6 changes:
> * Metrics display now has "Non port specific" rather than "port -1"
> * Fixed sign issue in EWMA delta calculation
> * Rebased to master
> 
> v5 changes:
> * Updated Shared Library Versions in release notes
> * Merged in Reshma's latencystats library
> 
> v4 changes:
> * References to 16.11 changed to 17.02
> * Fetching of non-port values was broken
> * Added sanity checks to value fetching
> * rte_stat_value renamed to rte_metric_value
> * Corrected doxygen descriptions
> * Added MAINTAINERS entries
> * Added #ifdef directives to bitrate code in test-pmd
> 
> v3 changes:
> * Marked rte_stats_bitrate_s as internal
> * Minor integer roundoff correction
> * Coding style corrections
> * Removed spurious object allocation
> * Changes to rte_metrics.[ch] moved from Patch 2/3 to 1/3.
> * Reintroduced non-port values (RTE_METRICS_NONPORT)
> * Added spinlocks to metric library
> * Removed spurious test registration/update
> * Added release notes entries
> 
> v2 changes:
> * Uses a new metrics library rather than being part of ethdev
> 
> 
> Remy Horton (3):
>   lib: add information metrics library
>   lib: add bitrate statistics library
>   app/test-pmd: add bitrate statistics calculation
> 
> Reshma Pattan (3):
>   app/proc_info: add metrics displaying
>   lib: added new library for latency stats
>   app/test-pmd: add latency statistics calculation
> 
>  MAINTAINERS                                        |  12 +
>  app/proc_info/main.c                               |  79 ++++-
>  app/test-pmd/parameters.c                          |  20 +-
>  app/test-pmd/testpmd.c                             |  78 ++++-
>  app/test-pmd/testpmd.h                             |   6 +-
>  config/common_base                                 |  15 +
>  doc/api/doxy-api-index.md                          |   5 +-
>  doc/api/doxy-api.conf                              |   5 +-
>  doc/guides/prog_guide/index.rst                    |   3 +-
>  doc/guides/prog_guide/metrics_lib.rst              | 299 +++++++++++++++++
>  doc/guides/rel_notes/release_17_05.rst             |  21 ++
>  lib/Makefile                                       |   6 +
>  lib/librte_bitratestats/Makefile                   |  53 +++
>  lib/librte_bitratestats/rte_bitrate.c              | 145 +++++++++
>  lib/librte_bitratestats/rte_bitrate.h              |  84 +++++
>  .../rte_bitratestats_version.map                   |   9 +
>  lib/librte_latencystats/Makefile                   |  56 ++++
>  lib/librte_latencystats/rte_latencystats.c         | 361
> +++++++++++++++++++++
>  lib/librte_latencystats/rte_latencystats.h         | 154 +++++++++
>  .../rte_latencystats_version.map                   |  11 +
>  lib/librte_metrics/Makefile                        |  51 +++
>  lib/librte_metrics/rte_metrics.c                   | 302 +++++++++++++++++
>  lib/librte_metrics/rte_metrics.h                   | 240 ++++++++++++++
>  lib/librte_metrics/rte_metrics_version.map         |  13 +
>  mk/rte.app.mk                                      |   3 +
>  25 files changed, 2023 insertions(+), 8 deletions(-)  create mode 100644
> doc/guides/prog_guide/metrics_lib.rst
>  create mode 100644 lib/librte_bitratestats/Makefile  create mode 100644
> lib/librte_bitratestats/rte_bitrate.c
>  create mode 100644 lib/librte_bitratestats/rte_bitrate.h
>  create mode 100644 lib/librte_bitratestats/rte_bitratestats_version.map
>  create mode 100644 lib/librte_latencystats/Makefile  create mode 100644
> lib/librte_latencystats/rte_latencystats.c
>  create mode 100644 lib/librte_latencystats/rte_latencystats.h
>  create mode 100644 lib/librte_latencystats/rte_latencystats_version.map
>  create mode 100644 lib/librte_metrics/Makefile  create mode 100644
> lib/librte_metrics/rte_metrics.c  create mode 100644
> lib/librte_metrics/rte_metrics.h  create mode 100644
> lib/librte_metrics/rte_metrics_version.map
> 
> --
> 2.5.5

Since I have only very few minor comments on this patch set , I will ack this patch, please feel free to add my ack for next patch set.

Series Acked-by: Reshma Pattan <reshma.pattan@intel.com>

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v14 0/6] Expanded statistics reporting
  2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
                     ` (6 preceding siblings ...)
  2017-03-30 13:18   ` [dpdk-dev] [PATCH v13 0/6] Expanded statistics reporting Pattan, Reshma
@ 2017-03-30 21:00   ` Remy Horton
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library Remy Horton
                       ` (6 more replies)
  7 siblings, 7 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-30 21:00 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patchset consists of three libraries: A Metrics library for
distributing device information, a library that calculates bit-rate
statistics, and a library that calculates latency statistics. The
latter two libraries make use of the first library.

Metrics Library
---------------
The Metrics library implements a mechanism by which producers can
publish numeric information for later querying by consumers.
In practice producers will typically be other libraries or
primary processes, whereas consumers will typically be applications.

Metrics themselves are statistics that are not generated by PMDs.
Metric information is populated using a push model, where producers
update the values contained within the metric library by calling an
update function on the relevant metrics. Consumers receive metric
information by querying the central metric data, which is held
in shared memory so it can also be accessed by secondary processes.

For each metric, a separate value is maintained for each port id,
and when publishing metric values the producers need to specify
which port is being updated. In addition there is a special id
RTE_METRICS_GLOBAL that is intended for global statistics that are
not associated with any individual device. Since the metrics
library is self-contained, the only restriction on port numbers is
that they are less than RTE_MAX_ETHPORTS - there is no requirement
for the ports to actually exist.

Metrics must first be registered, which is the way producers declare
the names of the metrics they will be publishing. Registration can
either be done individually, or as a group as a metric set. The
intention is for all metrics in a set to be updated in one go,
although it is also possible for metrics within a set to be updated
individually. It is up to the producers to update metrics as required.

Bit-rate statistics library
---------------------------
The bit-rate library calculates the mean, the exponentially-weighted
moving average, and peak bit-rates for each active port (i.e. network
device). These statistics are then reported via the metrics library
using the following names: mean_bits_in, mean_bits_out, ewma_bits_in,
ewma_bits_out, peak_bits_in, and peak_bits_out. The sampling window 
used for calculation is decided by the application requiring the statistics.

Latency statistics library
--------------------------
The latency statistics library calculates the port-to-port latency of
packet processing by a DPDK application, reporting the minimum, average,
and maximum nano-seconds that packet processing takes, as well as the
jitter in processing delay. These statistics are then reported via the
metrics library using the following names: min_latency_ns, avg_latency_ns,
mac_latency_ns, and jitter_ns.

This is dependent on http://dpdk.org/dev/patchwork/patch/21607/ for the
timestamp MBUF field.

For more details on the metrics library and the Bit-rate and Latency
components see the Programmer's Guide updates in the patchset.

Series-acked-by: Reshma Pattan <reshma.pattan@intel.com>
--
v14 changes:
* Rebased to 94c0776b1bad
* Added library optimisation flags
* Added missing ifdef guards
* Made use of ARRAY_SIZE() macro
* Corrected printf message

v13 changes:
* Rebased to latest master (b88161be4227)
* Updated copyright years to 2017
* Some release notes were in wrong file (17.02 rather than 17.05)
* Added a missing NULL check
* Doxygen & comment spelling corrections
* Authorship of some patches changed to reflect main contributer
* EWMA calculation for inbound and outbound bitrates were subtly different
* Use sizeof() rather than magic numbers for array sizes
* The recent feb9f680cd2c ("mk: optimize directory dependencies") required
  DEPDIRS-librte_ dependency information to be added to lib/Makefile

v12 changes:
* Rebased to latest master
* Misspellings in MAINTAINERS corrected
* Removed MBUF modifications (use Olivier's MBUF rework)

v11 changes:
* Rebased
* .map references to 17.02 changed to 17.05
* Release ntoes moved to release_17_05.rst
* Bit-rate library now also gives unfiltered average

v10 changes:
* Rebased
* Relocated some config-related directives.
* Removed incorrect capitalisations in API docs.
* Formatting & detail corrections in release notes.
* Moved around struct member descriptions.
* Rewritten rte_metrics.h file description.
* Rewritten description of RTE_METRICS_GLOBAL.
* Used 'producers' and 'consumers' as terms.
* Removed markup (bold text) in Doxygen tags.
* Added programming guide section.

v9 changes:
* Updated .map files to reflect function changes in v8
* Fixed rte_malloc() of zero bytes in proc_info when no metrics exist
* Fixed rte_metrics_init not being called explicitly in testpmd

v8 changes:
* Release notes correction
* Updated copyright years
* rte_metric_init() takes socket id & must be explicitly called
* rte_metrics_reg_metric renamed to rte_metrics_reg_name()
* rte_metrics_update_metric() renamed to rte_metrics_update_value()
* Doxygen updates
* Changed malloc()/free() to rte_malloc()/rte_free()
* Removed redundant memset()
* rte_stats_bitrates_s renamed to rte_stats_bitrates_s
* Split mbuf change to own patch for visibility
* CYCLES_PER_NS now a static inline function
* latency: "hidden" pthread creation now has polling API instead.
* Struct declarations and variable definitions cleaned up
* Double initialization of the latency library now returns -EEXIST
* MAINTAINERS entry for layenctstats in correct section

v7 changes:
* RTE_METRICS_NONPORT renamed to RTE_METRICS_GLOBAL
* Multiple changes to rte_metrics.h doxygen documentation
* Split apart latency patch into lib, test-pmd, & proc_info parts
* Reordered patches by functionality
* Insufficent capacity return value changed from -ERANGE to actual size
* Cache alignment in bitrate library
* Tightened up const usage to avoid STATIC_CONST_CHAR_ARRAY warning
* Reshma reinstated as author for (now split) latency patch
* Rebase to master

v6 changes:
* Metrics display now has "Non port specific" rather than "port -1"
* Fixed sign issue in EWMA delta calculation
* Rebased to master

v5 changes:
* Updated Shared Library Versions in release notes
* Merged in Reshma's latencystats library

v4 changes:
* References to 16.11 changed to 17.02
* Fetching of non-port values was broken
* Added sanity checks to value fetching
* rte_stat_value renamed to rte_metric_value
* Corrected doxygen descriptions
* Added MAINTAINERS entries
* Added #ifdef directives to bitrate code in test-pmd

v3 changes:
* Marked rte_stats_bitrate_s as internal
* Minor integer roundoff correction
* Coding style corrections
* Removed spurious object allocation
* Changes to rte_metrics.[ch] moved from Patch 2/3 to 1/3.
* Reintroduced non-port values (RTE_METRICS_NONPORT)
* Added spinlocks to metric library
* Removed spurious test registration/update
* Added release notes entries

v2 changes:
* Uses a new metrics library rather than being part of ethdev


Remy Horton (3):
  lib: add information metrics library
  lib: add bitrate statistics library
  app/test-pmd: add bitrate statistics calculation

Reshma Pattan (3):
  app/proc_info: add metrics displaying
  lib: added new library for latency stats
  app/test-pmd: add latency statistics calculation

 MAINTAINERS                                        |  12 +
 app/proc_info/main.c                               |  79 ++++-
 app/test-pmd/parameters.c                          |  22 +-
 app/test-pmd/testpmd.c                             |  78 ++++-
 app/test-pmd/testpmd.h                             |   8 +-
 config/common_base                                 |  15 +
 doc/api/doxy-api-index.md                          |   5 +-
 doc/api/doxy-api.conf                              |   5 +-
 doc/guides/prog_guide/index.rst                    |   3 +-
 doc/guides/prog_guide/metrics_lib.rst              | 299 +++++++++++++++++
 doc/guides/rel_notes/release_17_05.rst             |  21 ++
 lib/Makefile                                       |   6 +
 lib/librte_bitratestats/Makefile                   |  53 +++
 lib/librte_bitratestats/rte_bitrate.c              | 146 +++++++++
 lib/librte_bitratestats/rte_bitrate.h              |  84 +++++
 .../rte_bitratestats_version.map                   |   9 +
 lib/librte_latencystats/Makefile                   |  56 ++++
 lib/librte_latencystats/rte_latencystats.c         | 361 +++++++++++++++++++++
 lib/librte_latencystats/rte_latencystats.h         | 154 +++++++++
 .../rte_latencystats_version.map                   |  11 +
 lib/librte_metrics/Makefile                        |  51 +++
 lib/librte_metrics/rte_metrics.c                   | 302 +++++++++++++++++
 lib/librte_metrics/rte_metrics.h                   | 240 ++++++++++++++
 lib/librte_metrics/rte_metrics_version.map         |  13 +
 mk/rte.app.mk                                      |   3 +
 25 files changed, 2028 insertions(+), 8 deletions(-)
 create mode 100644 doc/guides/prog_guide/metrics_lib.rst
 create mode 100644 lib/librte_bitratestats/Makefile
 create mode 100644 lib/librte_bitratestats/rte_bitrate.c
 create mode 100644 lib/librte_bitratestats/rte_bitrate.h
 create mode 100644 lib/librte_bitratestats/rte_bitratestats_version.map
 create mode 100644 lib/librte_latencystats/Makefile
 create mode 100644 lib/librte_latencystats/rte_latencystats.c
 create mode 100644 lib/librte_latencystats/rte_latencystats.h
 create mode 100644 lib/librte_latencystats/rte_latencystats_version.map
 create mode 100644 lib/librte_metrics/Makefile
 create mode 100644 lib/librte_metrics/rte_metrics.c
 create mode 100644 lib/librte_metrics/rte_metrics.h
 create mode 100644 lib/librte_metrics/rte_metrics_version.map

-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
@ 2017-03-30 21:00     ` Remy Horton
  2017-04-05 13:39       ` Thomas Monjalon
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 2/6] app/proc_info: add metrics displaying Remy Horton
                       ` (5 subsequent siblings)
  6 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-03-30 21:00 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.

Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 MAINTAINERS                                |   4 +
 config/common_base                         |   5 +
 doc/api/doxy-api-index.md                  |   3 +-
 doc/api/doxy-api.conf                      |   3 +-
 doc/guides/prog_guide/index.rst            |   3 +-
 doc/guides/prog_guide/metrics_lib.rst      | 180 +++++++++++++++++
 doc/guides/rel_notes/release_17_05.rst     |   9 +
 lib/Makefile                               |   2 +
 lib/librte_metrics/Makefile                |  51 +++++
 lib/librte_metrics/rte_metrics.c           | 302 +++++++++++++++++++++++++++++
 lib/librte_metrics/rte_metrics.h           | 240 +++++++++++++++++++++++
 lib/librte_metrics/rte_metrics_version.map |  13 ++
 mk/rte.app.mk                              |   1 +
 13 files changed, 813 insertions(+), 3 deletions(-)
 create mode 100644 doc/guides/prog_guide/metrics_lib.rst
 create mode 100644 lib/librte_metrics/Makefile
 create mode 100644 lib/librte_metrics/rte_metrics.c
 create mode 100644 lib/librte_metrics/rte_metrics.h
 create mode 100644 lib/librte_metrics/rte_metrics_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 4cb6e49..4eede38 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -626,6 +626,10 @@ F: lib/librte_jobstats/
 F: examples/l2fwd-jobstats/
 F: doc/guides/sample_app_ug/l2_forward_job_stats.rst
 
+Metrics
+M: Remy Horton <remy.horton@intel.com>
+F: lib/librte_metrics/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 2d54ddf..52394d9 100644
--- a/config/common_base
+++ b/config/common_base
@@ -503,6 +503,11 @@ CONFIG_RTE_LIBRTE_EFD=y
 CONFIG_RTE_LIBRTE_JOBSTATS=y
 
 #
+# Compile the device metrics library
+#
+CONFIG_RTE_LIBRTE_METRICS=y
+
+#
 # Compile librte_lpm
 #
 CONFIG_RTE_LIBRTE_LPM=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index eb39f69..1cbe128 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -4,7 +4,7 @@ API {#index}
 <!--
   BSD LICENSE
 
-  Copyright 2013 6WIND S.A.
+  Copyright 2013-2017 6WIND S.A.
 
   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
@@ -156,4 +156,5 @@ There are many libraries, so their headers may be grouped by topics:
   [common]             (@ref rte_common.h),
   [ABI compat]         (@ref rte_compat.h),
   [keepalive]          (@ref rte_keepalive.h),
+  [device metrics]     (@ref rte_metrics.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index fdcf13c..0562814 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -1,6 +1,6 @@
 # BSD LICENSE
 #
-# Copyright 2013 6WIND S.A.
+# Copyright 2013-2017 6WIND S.A.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -52,6 +52,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_mbuf \
                           lib/librte_mempool \
                           lib/librte_meter \
+                          lib/librte_metrics \
                           lib/librte_net \
                           lib/librte_pdump \
                           lib/librte_pipeline \
diff --git a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst
index 77f427e..ef5a02a 100644
--- a/doc/guides/prog_guide/index.rst
+++ b/doc/guides/prog_guide/index.rst
@@ -1,5 +1,5 @@
 ..  BSD LICENSE
-    Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+    Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
     All rights reserved.
 
     Redistribution and use in source and binary forms, with or without
@@ -62,6 +62,7 @@ Programmer's Guide
     packet_classif_access_ctrl
     packet_framework
     vhost_lib
+    metrics_lib
     port_hotplug_framework
     source_org
     dev_kit_build_system
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
new file mode 100644
index 0000000..87f806d
--- /dev/null
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -0,0 +1,180 @@
+..  BSD LICENSE
+    Copyright(c) 2017 Intel Corporation. All rights reserved.
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+.. _Metrics_Library:
+
+Metrics Library
+===============
+
+The Metrics library implements a mechanism by which *producers* can
+publish numeric information for later querying by *consumers*. In
+practice producers will typically be other libraries or primary
+processes, whereas consumers will typically be applications.
+
+Metrics themselves are statistics that are not generated by PMDs. Metric
+information is populated using a push model, where producers update the
+values contained within the metric library by calling an update function
+on the relevant metrics. Consumers receive metric information by querying
+the central metric data, which is held in shared memory.
+
+For each metric, a separate value is maintained for each port id, and
+when publishing metric values the producers need to specify which port is
+being updated. In addition there is a special id ``RTE_METRICS_GLOBAL``
+that is intended for global statistics that are not associated with any
+individual device. Since the metrics library is self-contained, the only
+restriction on port numbers is that they are less than ``RTE_MAX_ETHPORTS``
+- there is no requirement for the ports to actually exist.
+
+Initialising the library
+------------------------
+
+Before the library can be used, it has to be initialized by calling
+``rte_metrics_init()`` which sets up the metric store in shared memory.
+This is where producers will publish metric information to, and where
+consumers will query it from.
+
+.. code-block:: c
+
+    rte_metrics_init(rte_socket_id());
+
+This function **must** be called from a primary process, but otherwise
+producers and consumers can be in either primary or secondary processes.
+
+Registering metrics
+-------------------
+
+Metrics must first be *registered*, which is the way producers declare
+the names of the metrics they will be publishing. Registration can either
+be done individually, or a set of metrics can be registered as a group.
+Individual registration is done using ``rte_metrics_reg_name()``:
+
+.. code-block:: c
+
+    id_1 = rte_metrics_reg_name("mean_bits_in");
+    id_2 = rte_metrics_reg_name("mean_bits_out");
+    id_3 = rte_metrics_reg_name("peak_bits_in");
+    id_4 = rte_metrics_reg_name("peak_bits_out");
+
+or alternatively, a set of metrics can be registered together using
+``rte_metrics_reg_names()``:
+
+.. code-block:: c
+
+    const char * const names[] = {
+        "mean_bits_in", "mean_bits_out",
+        "peak_bits_in", "peak_bits_out",
+    };
+    id_set = rte_metrics_reg_names(&names[0], 4);
+
+If the return value is negative, it means registration failed. Otherwise
+the return value is the *key* for the metric, which is used when updating
+values. A table mapping together these key values and the metrics' names
+can be obtained using ``rte_metrics_get_names()``.
+
+Updating metric values
+----------------------
+
+Once registered, producers can update the metric for a given port using
+the ``rte_metrics_update_value()`` function. This uses the metric key
+that is returned when registering the metric, and can also be looked up
+using ``rte_metrics_get_names()``.
+
+.. code-block:: c
+
+    rte_metrics_update_value(port_id, id_1, values[0]);
+    rte_metrics_update_value(port_id, id_2, values[1]);
+    rte_metrics_update_value(port_id, id_3, values[2]);
+    rte_metrics_update_value(port_id, id_4, values[3]);
+
+if metrics were registered as a single set, they can either be updated
+individually using ``rte_metrics_update_value()``, or updated together
+using the ``rte_metrics_update_values()`` function:
+
+.. code-block:: c
+
+    rte_metrics_update_value(port_id, id_set, values[0]);
+    rte_metrics_update_value(port_id, id_set + 1, values[1]);
+    rte_metrics_update_value(port_id, id_set + 2, values[2]);
+    rte_metrics_update_value(port_id, id_set + 3, values[3]);
+
+    rte_metrics_update_values(port_id, id_set, values, 4);
+
+Note that ``rte_metrics_update_values()`` cannot be used to update
+metric values from *multiple* *sets*, as there is no guarantee two
+sets registered one after the other have contiguous id values.
+
+Querying metrics
+----------------
+
+Consumers can obtain metric values by querying the metrics library using
+the ``rte_metrics_get_values()`` function that return an array of
+``struct rte_metric_value``. Each entry within this array contains a metric
+value and its associated key. A key-name mapping can be obtained using the
+``rte_metrics_get_names()`` function that returns an array of
+``struct rte_metric_name`` that is indexed by the key. The following will
+print out all metrics for a given port:
+
+.. code-block:: c
+
+    void print_metrics() {
+        struct rte_metric_name *names;
+        int len;
+
+        len = rte_metrics_get_names(NULL, 0);
+        if (len < 0) {
+            printf("Cannot get metrics count\n");
+            return;
+        }
+        if (len == 0) {
+            printf("No metrics to display (none have been registered)\n");
+            return;
+        }
+        metrics = malloc(sizeof(struct rte_metric_value) * len);
+        names =  malloc(sizeof(struct rte_metric_name) * len);
+        if (metrics == NULL || names == NULL) {
+            printf("Cannot allocate memory\n");
+            free(metrics);
+            free(names);
+            return;
+        }
+        ret = rte_metrics_get_values(port_id, metrics, len);
+        if (ret < 0 || ret > len) {
+            printf("Cannot get metrics values\n");
+            free(metrics);
+            free(names);
+            return;
+        }
+        printf("Metrics for port %i:\n", port_id);
+        for (i = 0; i < len; i++)
+            printf("  %s: %"PRIu64"\n",
+                names[metrics[i].key].name, metrics[i].value);
+        free(metrics);
+        free(names);
+    }
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index c4bb49a..e8695b2 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -87,6 +87,14 @@ Resolved Issues
    Also, make sure to start the actual text at the margin.
    =========================================================
 
+* **Added information metric library.**
+
+  A library that allows information metrics to be added and updated
+  by producers, typically other libraries, for later retrieval by
+  consumers such as applications. It is intended to provide a
+  reporting mechanism that is independent of other libraries such
+  as ethdev.
+
 
 EAL
 ~~~
@@ -235,6 +243,7 @@ The libraries prepended with a plus sign were incremented in this version.
      librte_mbuf.so.2
      librte_mempool.so.2
      librte_meter.so.1
+   + librte_metrics.so.1
      librte_net.so.1
      librte_pdump.so.1
      librte_pipeline.so.3
diff --git a/lib/Makefile b/lib/Makefile
index 531b162..4da6daf 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -68,6 +68,8 @@ DEPDIRS-librte_ip_frag := librte_eal librte_mempool librte_mbuf librte_ether
 DEPDIRS-librte_ip_frag += librte_hash
 DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
 DEPDIRS-librte_jobstats := librte_eal
+DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
+DEPDIRS-librte_metrics := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DEPDIRS-librte_power := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
diff --git a/lib/librte_metrics/Makefile b/lib/librte_metrics/Makefile
new file mode 100644
index 0000000..27b3ff9
--- /dev/null
+++ b/lib/librte_metrics/Makefile
@@ -0,0 +1,51 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_metrics.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+
+EXPORT_MAP := rte_metrics_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_METRICS) := rte_metrics.c
+
+# Install header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_METRICS)-include += rte_metrics.h
+
+DEPDIRS-$(CONFIG_RTE_LIBRTE_METRICS) += lib/librte_eal
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_metrics/rte_metrics.c b/lib/librte_metrics/rte_metrics.c
new file mode 100644
index 0000000..e9a122c
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics.c
@@ -0,0 +1,302 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_metrics.h>
+#include <rte_lcore.h>
+#include <rte_memzone.h>
+#include <rte_spinlock.h>
+
+#define RTE_METRICS_MAX_METRICS 256
+#define RTE_METRICS_MEMZONE_NAME "RTE_METRICS"
+
+/**
+ * Internal stats metadata and value entry.
+ *
+ * @internal
+ */
+struct rte_metrics_meta_s {
+	/** Name of metric */
+	char name[RTE_METRICS_MAX_NAME_LEN];
+	/** Current value for metric */
+	uint64_t value[RTE_MAX_ETHPORTS];
+	/** Used for global metrics */
+	uint64_t global_value;
+	/** Index of next root element (zero for none) */
+	uint16_t idx_next_set;
+	/** Index of next metric in set (zero for none) */
+	uint16_t idx_next_stat;
+};
+
+/**
+ * Internal stats info structure.
+ *
+ * @internal
+ * Offsets into metadata are used instead of pointers because ASLR
+ * means that having the same physical addresses in different
+ * processes is not guaranteed.
+ */
+struct rte_metrics_data_s {
+	/**   Index of last metadata entry with valid data.
+	 * This value is not valid if cnt_stats is zero.
+	 */
+	uint16_t idx_last_set;
+	/**   Number of metrics. */
+	uint16_t cnt_stats;
+	/** Metric data memory block. */
+	struct rte_metrics_meta_s metadata[RTE_METRICS_MAX_METRICS];
+	/** Metric data access lock */
+	rte_spinlock_t lock;
+};
+
+void
+rte_metrics_init(int socket_id)
+{
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+
+	if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+		return;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone != NULL)
+		return;
+	memzone = rte_memzone_reserve(RTE_METRICS_MEMZONE_NAME,
+		sizeof(struct rte_metrics_data_s), socket_id, 0);
+	if (memzone == NULL)
+		rte_exit(EXIT_FAILURE, "Unable to allocate stats memzone\n");
+	stats = memzone->addr;
+	memset(stats, 0, sizeof(struct rte_metrics_data_s));
+	rte_spinlock_init(&stats->lock);
+}
+
+int
+rte_metrics_reg_name(const char *name)
+{
+	const char * const list_names[] = {name};
+
+	return rte_metrics_reg_names(list_names, 1);
+}
+
+int
+rte_metrics_reg_names(const char * const *names, uint16_t cnt_names)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	uint16_t idx_base;
+
+	/* Some sanity checks */
+	if (cnt_names < 1 || names == NULL)
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone == NULL)
+		return -EIO;
+	stats = memzone->addr;
+
+	if (stats->cnt_stats + cnt_names >= RTE_METRICS_MAX_METRICS)
+		return -ENOMEM;
+
+	rte_spinlock_lock(&stats->lock);
+
+	/* Overwritten later if this is actually first set.. */
+	stats->metadata[stats->idx_last_set].idx_next_set = stats->cnt_stats;
+
+	stats->idx_last_set = idx_base = stats->cnt_stats;
+
+	for (idx_name = 0; idx_name < cnt_names; idx_name++) {
+		entry = &stats->metadata[idx_name + stats->cnt_stats];
+		strncpy(entry->name, names[idx_name],
+			RTE_METRICS_MAX_NAME_LEN);
+		memset(entry->value, 0, sizeof(entry->value));
+		entry->idx_next_stat = idx_name + stats->cnt_stats + 1;
+	}
+	entry->idx_next_stat = 0;
+	entry->idx_next_set = 0;
+	stats->cnt_stats += cnt_names;
+
+	rte_spinlock_unlock(&stats->lock);
+
+	return idx_base;
+}
+
+int
+rte_metrics_update_value(int port_id, uint16_t key, const uint64_t value)
+{
+	return rte_metrics_update_values(port_id, key, &value, 1);
+}
+
+int
+rte_metrics_update_values(int port_id,
+	uint16_t key,
+	const uint64_t *values,
+	uint32_t count)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_metric;
+	uint16_t idx_value;
+	uint16_t cnt_setsize;
+
+	if (port_id != RTE_METRICS_GLOBAL &&
+			(port_id < 0 || port_id > RTE_MAX_ETHPORTS))
+		return -EINVAL;
+
+	if (values == NULL)
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	if (memzone == NULL)
+		return -EIO;
+	stats = memzone->addr;
+
+	rte_spinlock_lock(&stats->lock);
+	idx_metric = key;
+	cnt_setsize = 1;
+	while (idx_metric < stats->cnt_stats) {
+		entry = &stats->metadata[idx_metric];
+		if (entry->idx_next_stat == 0)
+			break;
+		cnt_setsize++;
+		idx_metric++;
+	}
+	/* Check update does not cross set border */
+	if (count > cnt_setsize) {
+		rte_spinlock_unlock(&stats->lock);
+		return -ERANGE;
+	}
+
+	if (port_id == RTE_METRICS_GLOBAL)
+		for (idx_value = 0; idx_value < count; idx_value++) {
+			idx_metric = key + idx_value;
+			stats->metadata[idx_metric].global_value =
+				values[idx_value];
+		}
+	else
+		for (idx_value = 0; idx_value < count; idx_value++) {
+			idx_metric = key + idx_value;
+			stats->metadata[idx_metric].value[port_id] =
+				values[idx_value];
+		}
+	rte_spinlock_unlock(&stats->lock);
+	return 0;
+}
+
+int
+rte_metrics_get_names(struct rte_metric_name *names,
+	uint16_t capacity)
+{
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	int return_value;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	/* If not allocated, fail silently */
+	if (memzone == NULL)
+		return 0;
+
+	stats = memzone->addr;
+	rte_spinlock_lock(&stats->lock);
+	if (names != NULL) {
+		if (capacity < stats->cnt_stats) {
+			return_value = stats->cnt_stats;
+			rte_spinlock_unlock(&stats->lock);
+			return return_value;
+		}
+		for (idx_name = 0; idx_name < stats->cnt_stats; idx_name++)
+			strncpy(names[idx_name].name,
+				stats->metadata[idx_name].name,
+				RTE_METRICS_MAX_NAME_LEN);
+	}
+	return_value = stats->cnt_stats;
+	rte_spinlock_unlock(&stats->lock);
+	return return_value;
+}
+
+int
+rte_metrics_get_values(int port_id,
+	struct rte_metric_value *values,
+	uint16_t capacity)
+{
+	struct rte_metrics_meta_s *entry;
+	struct rte_metrics_data_s *stats;
+	const struct rte_memzone *memzone;
+	uint16_t idx_name;
+	int return_value;
+
+	if (port_id != RTE_METRICS_GLOBAL &&
+			(port_id < 0 || port_id > RTE_MAX_ETHPORTS))
+		return -EINVAL;
+
+	memzone = rte_memzone_lookup(RTE_METRICS_MEMZONE_NAME);
+	/* If not allocated, fail silently */
+	if (memzone == NULL)
+		return 0;
+	stats = memzone->addr;
+	rte_spinlock_lock(&stats->lock);
+
+	if (values != NULL) {
+		if (capacity < stats->cnt_stats) {
+			return_value = stats->cnt_stats;
+			rte_spinlock_unlock(&stats->lock);
+			return return_value;
+		}
+		if (port_id == RTE_METRICS_GLOBAL)
+			for (idx_name = 0;
+					idx_name < stats->cnt_stats;
+					idx_name++) {
+				entry = &stats->metadata[idx_name];
+				values[idx_name].key = idx_name;
+				values[idx_name].value = entry->global_value;
+			}
+		else
+			for (idx_name = 0;
+					idx_name < stats->cnt_stats;
+					idx_name++) {
+				entry = &stats->metadata[idx_name];
+				values[idx_name].key = idx_name;
+				values[idx_name].value = entry->value[port_id];
+			}
+	}
+	return_value = stats->cnt_stats;
+	rte_spinlock_unlock(&stats->lock);
+	return return_value;
+}
diff --git a/lib/librte_metrics/rte_metrics.h b/lib/librte_metrics/rte_metrics.h
new file mode 100644
index 0000000..fd0154f
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics.h
@@ -0,0 +1,240 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * @file
+ *
+ * DPDK Metrics module
+ *
+ * Metrics are statistics that are not generated by PMDs, and hence
+ * are better reported through a mechanism that is independent from
+ * the ethdev-based extended statistics. Providers will typically
+ * be other libraries and consumers will typically be applications.
+ *
+ * Metric information is populated using a push model, where producers
+ * update the values contained within the metric library by calling
+ * an update function on the relevant metrics. Consumers receive
+ * metric information by querying the central metric data, which is
+ * held in shared memory. Currently only bulk querying of metrics
+ * by consumers is supported.
+ */
+
+#ifndef _RTE_METRICS_H_
+#define _RTE_METRICS_H_
+
+/** Maximum length of metric name (including null-terminator) */
+#define RTE_METRICS_MAX_NAME_LEN 64
+
+/**
+ * Global metric special id.
+ *
+ * When used for the port_id parameter when calling
+ * rte_metrics_update_metric() or rte_metrics_update_metric(),
+ * the global metric, which are not associated with any specific
+ * port (i.e. device), are updated.
+ */
+#define RTE_METRICS_GLOBAL -1
+
+
+/**
+ * A name-key lookup for metrics.
+ *
+ * An array of this structure is returned by rte_metrics_get_names().
+ * The struct rte_metric_value references these names via their array index.
+ */
+struct rte_metric_name {
+	/** String describing metric */
+	char name[RTE_METRICS_MAX_NAME_LEN];
+};
+
+
+/**
+ * Metric value structure.
+ *
+ * This structure is used by rte_metrics_get_values() to return metrics,
+ * which are statistics that are not generated by PMDs. It maps a name key,
+ * which corresponds to an index in the array returned by
+ * rte_metrics_get_names().
+ */
+struct rte_metric_value {
+	/** Numeric identifier of metric. */
+	uint16_t key;
+	/** Value for metric */
+	uint64_t value;
+};
+
+
+/**
+ * Initializes metric module. This function must be called from
+ * a primary process before metrics are used.
+ *
+ * @param socket_id
+ *   Socket to use for shared memory allocation.
+ */
+void rte_metrics_init(int socket_id);
+
+/**
+ * Register a metric, making it available as a reporting parameter.
+ *
+ * Registering a metric is the way producers declare a parameter
+ * that they wish to be reported. Once registered, the associated
+ * numeric key can be obtained via rte_metrics_get_names(), which
+ * is required for updating said metric's value.
+ *
+ * @param name
+ *   Metric name
+ *
+ * @return
+ *  - Zero or positive: Success (index key of new metric)
+ *  - -EIO: Error, unable to access metrics shared memory
+ *    (rte_metrics_init() not called)
+ *  - -EINVAL: Error, invalid parameters
+ *  - -ENOMEM: Error, maximum metrics reached
+ */
+int rte_metrics_reg_name(const char *name);
+
+/**
+ * Register a set of metrics.
+ *
+ * This is a bulk version of rte_metrics_reg_names() and aside from
+ * handling multiple keys at once is functionally identical.
+ *
+ * @param names
+ *   List of metric names
+ *
+ * @param cnt_names
+ *   Number of metrics in set
+ *
+ * @return
+ *  - Zero or positive: Success (index key of start of set)
+ *  - -EIO: Error, unable to access metrics shared memory
+ *    (rte_metrics_init() not called)
+ *  - -EINVAL: Error, invalid parameters
+ *  - -ENOMEM: Error, maximum metrics reached
+ */
+int rte_metrics_reg_names(const char * const *names, uint16_t cnt_names);
+
+/**
+ * Get metric name-key lookup table.
+ *
+ * @param names
+ *   A struct rte_metric_name array of at least *capacity* in size to
+ *   receive key names. If this is NULL, function returns the required
+ *   number of elements for this array.
+ *
+ * @param capacity
+ *   Size (number of elements) of struct rte_metric_name array.
+ *   Disregarded if names is NULL.
+ *
+ * @return
+ *   - Positive value above capacity: error, *names* is too small.
+ *     Return value is required size.
+ *   - Positive value equal or less than capacity: Success. Return
+ *     value is number of elements filled in.
+ *   - Negative value: error.
+ */
+int rte_metrics_get_names(
+	struct rte_metric_name *names,
+	uint16_t capacity);
+
+/**
+ * Get metric value table.
+ *
+ * @param port_id
+ *   Port id to query
+ *
+ * @param values
+ *   A struct rte_metric_value array of at least *capacity* in size to
+ *   receive metric ids and values. If this is NULL, function returns
+ *   the required number of elements for this array.
+ *
+ * @param capacity
+ *   Size (number of elements) of struct rte_metric_value array.
+ *   Disregarded if names is NULL.
+ *
+ * @return
+ *   - Positive value above capacity: error, *values* is too small.
+ *     Return value is required size.
+ *   - Positive value equal or less than capacity: Success. Return
+ *     value is number of elements filled in.
+ *   - Negative value: error.
+ */
+int rte_metrics_get_values(
+	int port_id,
+	struct rte_metric_value *values,
+	uint16_t capacity);
+
+/**
+ * Updates a metric
+ *
+ * @param port_id
+ *   Port to update metrics for
+ * @param key
+ *   Id of metric to update
+ * @param value
+ *   New value
+ *
+ * @return
+ *   - -EIO if unable to access shared metrics memory
+ *   - Zero on success
+ */
+int rte_metrics_update_value(
+	int port_id,
+	uint16_t key,
+	const uint64_t value);
+
+/**
+ * Updates a metric set. Note that it is an error to try to
+ * update across a set boundary.
+ *
+ * @param port_id
+ *   Port to update metrics for
+ * @param key
+ *   Base id of metrics set to update
+ * @param values
+ *   Set of new values
+ * @param count
+ *   Number of new values
+ *
+ * @return
+ *   - -ERANGE if count exceeds metric set size
+ *   - -EIO if unable to access shared metrics memory
+ *   - Zero on success
+ */
+int rte_metrics_update_values(
+	int port_id,
+	uint16_t key,
+	const uint64_t *values,
+	uint32_t count);
+
+#endif
diff --git a/lib/librte_metrics/rte_metrics_version.map b/lib/librte_metrics/rte_metrics_version.map
new file mode 100644
index 0000000..4c5234c
--- /dev/null
+++ b/lib/librte_metrics/rte_metrics_version.map
@@ -0,0 +1,13 @@
+DPDK_17.05 {
+	global:
+
+	rte_metrics_get_names;
+	rte_metrics_get_values;
+	rte_metrics_init;
+	rte_metrics_reg_name;
+	rte_metrics_reg_names;
+	rte_metrics_update_value;
+	rte_metrics_update_values;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 62a2a1a..ed3315c 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -98,6 +98,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_RING)           += -lrte_ring
 _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
+_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v14 2/6] app/proc_info: add metrics displaying
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library Remy Horton
@ 2017-03-30 21:00     ` Remy Horton
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 3/6] lib: add bitrate statistics library Remy Horton
                       ` (4 subsequent siblings)
  6 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-30 21:00 UTC (permalink / raw)
  To: dev; +Cc: Reshma Pattan, Thomas Monjalon

From: Reshma Pattan <reshma.pattan@intel.com>

Modify the dpdk-procinfo process to display the newly added metrics.
Added new command line option "--metrics" to display metrics.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/proc_info/main.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)

diff --git a/app/proc_info/main.c b/app/proc_info/main.c
index ef2098d..d576b42 100644
--- a/app/proc_info/main.c
+++ b/app/proc_info/main.c
@@ -1,7 +1,7 @@
 /*
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -58,6 +58,7 @@
 #include <rte_atomic.h>
 #include <rte_branch_prediction.h>
 #include <rte_string_fns.h>
+#include <rte_metrics.h>
 
 /* Maximum long option length for option parsing. */
 #define MAX_LONG_OPT_SZ 64
@@ -77,6 +78,8 @@ static uint32_t enable_collectd_format;
 static int stdout_fd;
 /**< Host id process is running on */
 static char host_id[MAX_LONG_OPT_SZ];
+/**< Enable metrics. */
+static uint32_t enable_metrics;
 /**< Enable stats reset. */
 static uint32_t reset_stats;
 /**< Enable xstats reset. */
@@ -94,6 +97,8 @@ proc_info_usage(const char *prgname)
 		"  --stats: to display port statistics, enabled by default\n"
 		"  --xstats: to display extended port statistics, disabled by "
 			"default\n"
+		"  --metrics: to display derived metrics of the ports, disabled by "
+			"default\n"
 		"  --stats-reset: to reset port statistics\n"
 		"  --xstats-reset: to reset port extended statistics\n"
 		"  --collectd-format: to print statistics to STDOUT in expected by collectd format\n"
@@ -171,6 +176,7 @@ proc_info_parse_args(int argc, char **argv)
 		{"stats", 0, NULL, 0},
 		{"stats-reset", 0, NULL, 0},
 		{"xstats", 0, NULL, 0},
+		{"metrics", 0, NULL, 0},
 		{"xstats-reset", 0, NULL, 0},
 		{"collectd-format", 0, NULL, 0},
 		{"host-id", 0, NULL, 0},
@@ -205,6 +211,10 @@ proc_info_parse_args(int argc, char **argv)
 			else if (!strncmp(long_option[option_index].name, "xstats",
 					MAX_LONG_OPT_SZ))
 				enable_xstats = 1;
+			else if (!strncmp(long_option[option_index].name,
+					"metrics",
+					MAX_LONG_OPT_SZ))
+				enable_metrics = 1;
 			/* Reset stats */
 			if (!strncmp(long_option[option_index].name, "stats-reset",
 					MAX_LONG_OPT_SZ))
@@ -414,6 +424,67 @@ nic_xstats_clear(uint8_t port_id)
 	printf("\n  NIC extended statistics for port %d cleared\n", port_id);
 }
 
+static void
+metrics_display(int port_id)
+{
+	struct rte_metric_value *metrics;
+	struct rte_metric_name *names;
+	int len, ret;
+	static const char *nic_stats_border = "########################";
+
+	len = rte_metrics_get_names(NULL, 0);
+	if (len < 0) {
+		printf("Cannot get metrics count\n");
+		return;
+	}
+	if (len == 0) {
+		printf("No metrics to display (none have been registered)\n");
+		return;
+	}
+
+	metrics = rte_malloc("proc_info_metrics",
+		sizeof(struct rte_metric_value) * len, 0);
+	if (metrics == NULL) {
+		printf("Cannot allocate memory for metrics\n");
+		return;
+	}
+
+	names =  rte_malloc(NULL, sizeof(struct rte_metric_name) * len, 0);
+	if (names == NULL) {
+		printf("Cannot allocate memory for metrcis names\n");
+		rte_free(metrics);
+		return;
+	}
+
+	if (len != rte_metrics_get_names(names, len)) {
+		printf("Cannot get metrics names\n");
+		rte_free(metrics);
+		rte_free(names);
+		return;
+	}
+
+	if (port_id == RTE_METRICS_GLOBAL)
+		printf("###### Non port specific metrics  #########\n");
+	else
+		printf("###### metrics for port %-2d #########\n", port_id);
+	printf("%s############################\n", nic_stats_border);
+	ret = rte_metrics_get_values(port_id, metrics, len);
+	if (ret < 0 || ret > len) {
+		printf("Cannot get metrics values\n");
+		rte_free(metrics);
+		rte_free(names);
+		return;
+	}
+
+	int i;
+	for (i = 0; i < len; i++)
+		printf("%s: %"PRIu64"\n", names[i].name, metrics[i].value);
+
+	printf("%s############################\n", nic_stats_border);
+	rte_free(metrics);
+	rte_free(names);
+}
+
 int
 main(int argc, char **argv)
 {
@@ -480,8 +551,14 @@ main(int argc, char **argv)
 				nic_stats_clear(i);
 			else if (reset_xstats)
 				nic_xstats_clear(i);
+			else if (enable_metrics)
+				metrics_display(i);
 		}
 	}
 
+	/* print port independent stats */
+	if (enable_metrics)
+		metrics_display(RTE_METRICS_GLOBAL);
+
 	return 0;
 }
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v14 3/6] lib: add bitrate statistics library
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library Remy Horton
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 2/6] app/proc_info: add metrics displaying Remy Horton
@ 2017-03-30 21:00     ` Remy Horton
  2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
                       ` (3 subsequent siblings)
  6 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-30 21:00 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 MAINTAINERS                                        |   4 +
 config/common_base                                 |   5 +
 doc/api/doxy-api-index.md                          |   1 +
 doc/api/doxy-api.conf                              |   1 +
 doc/guides/prog_guide/metrics_lib.rst              |  65 +++++++++
 doc/guides/rel_notes/release_17_05.rst             |   6 +
 lib/Makefile                                       |   2 +
 lib/librte_bitratestats/Makefile                   |  53 ++++++++
 lib/librte_bitratestats/rte_bitrate.c              | 146 +++++++++++++++++++++
 lib/librte_bitratestats/rte_bitrate.h              |  84 ++++++++++++
 .../rte_bitratestats_version.map                   |   9 ++
 mk/rte.app.mk                                      |   1 +
 12 files changed, 377 insertions(+)
 create mode 100644 lib/librte_bitratestats/Makefile
 create mode 100644 lib/librte_bitratestats/rte_bitrate.c
 create mode 100644 lib/librte_bitratestats/rte_bitrate.h
 create mode 100644 lib/librte_bitratestats/rte_bitratestats_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 4eede38..09afcd3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -630,6 +630,10 @@ Metrics
 M: Remy Horton <remy.horton@intel.com>
 F: lib/librte_metrics/
 
+Bit-rate statistics
+M: Remy Horton <remy.horton@intel.com>
+F: lib/librte_bitratestats/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 52394d9..1b59174 100644
--- a/config/common_base
+++ b/config/common_base
@@ -632,3 +632,8 @@ CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
 # Compile the crypto performance application
 #
 CONFIG_RTE_APP_CRYPTO_PERF=y
+
+#
+# Compile the bitrate statistics library
+#
+CONFIG_RTE_LIBRTE_BITRATE=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 1cbe128..18c8676 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -157,4 +157,5 @@ There are many libraries, so their headers may be grouped by topics:
   [ABI compat]         (@ref rte_compat.h),
   [keepalive]          (@ref rte_keepalive.h),
   [device metrics]     (@ref rte_metrics.h),
+  [bitrate statistics] (@ref rte_bitrate.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index 0562814..7a971b6 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -36,6 +36,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_eal/common/include \
                           lib/librte_eal/common/include/generic \
                           lib/librte_acl \
+                          lib/librte_bitratestats \
                           lib/librte_cfgfile \
                           lib/librte_cmdline \
                           lib/librte_compat \
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
index 87f806d..71c3a1b 100644
--- a/doc/guides/prog_guide/metrics_lib.rst
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -178,3 +178,68 @@ print out all metrics for a given port:
         free(metrics);
         free(names);
     }
+
+
+Bit-rate statistics library
+---------------------------
+
+The bit-rate library calculates the exponentially-weighted moving
+average and peak bit-rates for each active port (i.e. network device).
+These statistics are reported via the metrics library using the
+following names:
+
+    - ``mean_bits_in``: Average inbound bit-rate
+    - ``mean_bits_out``:  Average outbound bit-rate
+    - ``ewma_bits_in``: Average inbound bit-rate (EWMA smoothed)
+    - ``ewma_bits_out``:  Average outbound bit-rate (EWMA smoothed)
+    - ``peak_bits_in``:  Peak inbound bit-rate
+    - ``peak_bits_out``:  Peak outbound bit-rate
+
+Once initialised and clocked at the appropriate frequency, these
+statistics can be obtained by querying the metrics library.
+
+Initialization
+~~~~~~~~~~~~~~
+
+Before the library can be used, it has to be initialised by calling
+``rte_stats_bitrate_create()``, which will return a bit-rate
+calculation object. Since the bit-rate library uses the metrics library
+to report the calculated statistics, the bit-rate library then needs to
+register the calculated statistics with the metrics library. This is
+done using the helper function ``rte_stats_bitrate_reg()``.
+
+.. code-block:: c
+
+    struct rte_stats_bitrates *bitrate_data;
+
+    bitrate_data = rte_stats_bitrate_create();
+    if (bitrate_data == NULL)
+        rte_exit(EXIT_FAILURE, "Could not allocate bit-rate data.\n");
+    rte_stats_bitrate_reg(bitrate_data);
+
+Controlling the sampling rate
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Since the library works by periodic sampling but does not use an
+internal thread, the application has to periodically call
+``rte_stats_bitrate_calc()``. The frequency at which this function
+is called should be the intended sampling rate required for the
+calculated statistics. For instance if per-second statistics are
+desired, this function should be called once a second.
+
+.. code-block:: c
+
+    tics_datum = rte_rdtsc();
+    tics_per_1sec = rte_get_timer_hz();
+
+    while( 1 ) {
+        /* ... */
+        tics_current = rte_rdtsc();
+	if (tics_current - tics_datum >= tics_per_1sec) {
+	    /* Periodic bitrate calculation */
+	    for (idx_port = 0; idx_port < cnt_ports; idx_port++)
+	            rte_stats_bitrate_calc(bitrate_data, idx_port);
+		tics_datum = tics_current;
+	    }
+        /* ... */
+    }
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index e8695b2..9699541 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -95,6 +95,11 @@ Resolved Issues
   reporting mechanism that is independent of other libraries such
   as ethdev.
 
+* **Added bit-rate calculation library.**
+
+  A library that can be used to calculate device bit-rates. Calculated
+  bitrates are reported using the metrics library.
+
 
 EAL
 ~~~
@@ -228,6 +233,7 @@ The libraries prepended with a plus sign were incremented in this version.
 .. code-block:: diff
 
      librte_acl.so.2
+   + librte_bitratestats.so.1
      librte_cfgfile.so.2
      librte_cmdline.so.2
      librte_cryptodev.so.2
diff --git a/lib/Makefile b/lib/Makefile
index 4da6daf..90ab559 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -70,6 +70,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
 DEPDIRS-librte_jobstats := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
 DEPDIRS-librte_metrics := librte_eal
+DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
+DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ether
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DEPDIRS-librte_power := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
diff --git a/lib/librte_bitratestats/Makefile b/lib/librte_bitratestats/Makefile
new file mode 100644
index 0000000..74fd75a
--- /dev/null
+++ b/lib/librte_bitratestats/Makefile
@@ -0,0 +1,53 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_bitratestats.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+
+EXPORT_MAP := rte_bitratestats_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_BITRATE) := rte_bitrate.c
+
+# Install header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_BITRATE)-include += rte_bitrate.h
+
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += lib/librte_metrics
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_bitratestats/rte_bitrate.c b/lib/librte_bitratestats/rte_bitrate.c
new file mode 100644
index 0000000..260750f
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitrate.c
@@ -0,0 +1,146 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <rte_common.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+#include <rte_metrics.h>
+#include <rte_bitrate.h>
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/*
+ * Persistent bit-rate data.
+ * @internal
+ */
+struct rte_stats_bitrate {
+	uint64_t last_ibytes;
+	uint64_t last_obytes;
+	uint64_t peak_ibits;
+	uint64_t peak_obits;
+	uint64_t mean_ibits;
+	uint64_t mean_obits;
+	uint64_t ewma_ibits;
+	uint64_t ewma_obits;
+};
+
+struct rte_stats_bitrates {
+	struct rte_stats_bitrate port_stats[RTE_MAX_ETHPORTS];
+	uint16_t id_stats_set;
+};
+
+struct rte_stats_bitrates *
+rte_stats_bitrate_create(void)
+{
+	return rte_zmalloc(NULL, sizeof(struct rte_stats_bitrates),
+		RTE_CACHE_LINE_SIZE);
+}
+
+int
+rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data)
+{
+	const char * const names[] = {
+		"ewma_bits_in", "ewma_bits_out",
+		"mean_bits_in", "mean_bits_out",
+		"peak_bits_in", "peak_bits_out",
+	};
+	int return_value;
+
+	return_value = rte_metrics_reg_names(&names[0], ARRAY_SIZE(names));
+	if (return_value >= 0)
+		bitrate_data->id_stats_set = return_value;
+	return return_value;
+}
+
+int
+rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+	uint8_t port_id)
+{
+	struct rte_stats_bitrate *port_data;
+	struct rte_eth_stats eth_stats;
+	int ret_code;
+	uint64_t cnt_bits;
+	int64_t delta;
+	const int64_t alpha_percent = 20;
+	uint64_t values[6];
+
+	ret_code = rte_eth_stats_get(port_id, &eth_stats);
+	if (ret_code != 0)
+		return ret_code;
+
+	port_data = &bitrate_data->port_stats[port_id];
+
+	/* Incoming bitrate. This is an iteratively calculated EWMA
+	 * (Exponentially Weighted Moving Average) that uses a
+	 * weighting factor of alpha_percent. An unsmoothed mean
+	 * for just the current time delta is also calculated for the
+	 * benefit of people who don't understand signal processing.
+	 */
+	cnt_bits = (eth_stats.ibytes - port_data->last_ibytes) << 3;
+	port_data->last_ibytes = eth_stats.ibytes;
+	if (cnt_bits > port_data->peak_ibits)
+		port_data->peak_ibits = cnt_bits;
+	delta = cnt_bits;
+	delta -= port_data->ewma_ibits;
+	/* The +-50 fixes integer rounding during divison */
+	if (delta > 0)
+		delta = (delta * alpha_percent + 50) / 100;
+	else
+		delta = (delta * alpha_percent - 50) / 100;
+	port_data->ewma_ibits += delta;
+	port_data->mean_ibits = cnt_bits;
+
+	/* Outgoing bitrate (also EWMA) */
+	cnt_bits = (eth_stats.obytes - port_data->last_obytes) << 3;
+	port_data->last_obytes = eth_stats.obytes;
+	if (cnt_bits > port_data->peak_obits)
+		port_data->peak_obits = cnt_bits;
+	delta = cnt_bits;
+	delta -= port_data->ewma_obits;
+	if (delta > 0)
+		delta = (delta * alpha_percent + 50) / 100;
+	else
+		delta = (delta * alpha_percent - 50) / 100;
+	port_data->ewma_obits += delta;
+	port_data->mean_obits = cnt_bits;
+
+	values[0] = port_data->ewma_ibits;
+	values[1] = port_data->ewma_obits;
+	values[2] = port_data->mean_ibits;
+	values[3] = port_data->mean_obits;
+	values[4] = port_data->peak_ibits;
+	values[5] = port_data->peak_obits;
+	rte_metrics_update_values(port_id, bitrate_data->id_stats_set,
+		values, ARRAY_SIZE(values));
+	return 0;
+}
diff --git a/lib/librte_bitratestats/rte_bitrate.h b/lib/librte_bitratestats/rte_bitrate.h
new file mode 100644
index 0000000..b9f11bd
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitrate.h
@@ -0,0 +1,84 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_BITRATE_H_
+#define _RTE_BITRATE_H_
+
+/**
+ *  Bitrate statistics data structure.
+ *  This data structure is intentionally opaque.
+ */
+struct rte_stats_bitrates;
+
+
+/**
+ * Allocate a bitrate statistics structure
+ *
+ * @return
+ *   - Pointer to structure on success
+ *   - NULL on error (zmalloc failure)
+ */
+struct rte_stats_bitrates *rte_stats_bitrate_create(void);
+
+
+/**
+ * Register bitrate statistics with the metric library.
+ *
+ * @param bitrate_data
+ *   Pointer allocated by rte_stats_create()
+ *
+ * @return
+ *   Zero on success
+ *   Negative on error
+ */
+int rte_stats_bitrate_reg(struct rte_stats_bitrates *bitrate_data);
+
+
+/**
+ * Calculate statistics for current time window. The period with which
+ * this function is called should be the intended sampling window width.
+ *
+ * @param bitrate_data
+ *   Bitrate statistics data pointer
+ *
+ * @param port_id
+ *   Port id to calculate statistics for
+ *
+ * @return
+ *  - Zero on success
+ *  - Negative value on error
+ */
+int rte_stats_bitrate_calc(struct rte_stats_bitrates *bitrate_data,
+	uint8_t port_id);
+
+#endif /* _RTE_BITRATE_H_ */
diff --git a/lib/librte_bitratestats/rte_bitratestats_version.map b/lib/librte_bitratestats/rte_bitratestats_version.map
new file mode 100644
index 0000000..fe74544
--- /dev/null
+++ b/lib/librte_bitratestats/rte_bitratestats_version.map
@@ -0,0 +1,9 @@
+DPDK_17.05 {
+	global:
+
+	rte_stats_bitrate_calc;
+	rte_stats_bitrate_create;
+	rte_stats_bitrate_reg;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index ed3315c..7104a8b 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -99,6 +99,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
 _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
 _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
+_LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE)        += -lrte_bitratestats
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v14 4/6] app/test-pmd: add bitrate statistics calculation
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
                       ` (2 preceding siblings ...)
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 3/6] lib: add bitrate statistics library Remy Horton
@ 2017-03-30 21:01     ` Remy Horton
  2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 5/6] lib: added new library for latency stats Remy Horton
                       ` (2 subsequent siblings)
  6 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-30 21:01 UTC (permalink / raw)
  To: dev; +Cc: Thomas Monjalon

Calculate bitrate statistics using the bitrate stats library. The
resulting statistics can be viewed via proc_info.

Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/test-pmd/testpmd.c | 41 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index e04e215..fc96f36 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -79,6 +79,10 @@
 #include <rte_pdump.h>
 #endif
 #include <rte_flow.h>
+#include <rte_metrics.h>
+#ifdef RTE_LIBRTE_BITRATE
+#include <rte_bitrate.h>
+#endif
 
 #include "testpmd.h"
 
@@ -323,6 +327,9 @@ uint16_t nb_rx_queue_stats_mappings = 0;
 
 unsigned max_socket = 0;
 
+/* Bitrate statistics */
+struct rte_stats_bitrates *bitrate_data;
+
 /* Forward function declarations */
 static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
 static void check_all_ports_link_status(uint32_t port_mask);
@@ -922,12 +929,30 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	struct fwd_stream **fsm;
 	streamid_t nb_fs;
 	streamid_t sm_id;
-
+#ifdef RTE_LIBRTE_BITRATE
+	uint64_t tics_per_1sec;
+	uint64_t tics_datum;
+	uint64_t tics_current;
+	uint8_t idx_port, cnt_ports;
+
+	cnt_ports = rte_eth_dev_count();
+	tics_datum = rte_rdtsc();
+	tics_per_1sec = rte_get_timer_hz();
+#endif
 	fsm = &fwd_streams[fc->stream_idx];
 	nb_fs = fc->stream_nb;
 	do {
 		for (sm_id = 0; sm_id < nb_fs; sm_id++)
 			(*pkt_fwd)(fsm[sm_id]);
+#ifdef RTE_LIBRTE_BITRATE
+		tics_current = rte_rdtsc();
+		if (tics_current - tics_datum >= tics_per_1sec) {
+			/* Periodic bitrate calculation */
+			for (idx_port = 0; idx_port < cnt_ports; idx_port++)
+				rte_stats_bitrate_calc(bitrate_data, idx_port);
+			tics_datum = tics_current;
+		}
+#endif
 	} while (! fc->stopped);
 }
 
@@ -2139,6 +2164,18 @@ main(int argc, char** argv)
 	FOREACH_PORT(port_id, ports)
 		rte_eth_promiscuous_enable(port_id);
 
+	/* Init metrics library */
+	rte_metrics_init(rte_socket_id());
+
+	/* Setup bitrate stats */
+#ifdef RTE_LIBRTE_BITRATE
+	bitrate_data = rte_stats_bitrate_create();
+	if (bitrate_data == NULL)
+		rte_exit(EXIT_FAILURE, "Could not allocate bitrate data.\n");
+	rte_stats_bitrate_reg(bitrate_data);
+#endif
+
+
 #ifdef RTE_LIBRTE_CMDLINE
 	if (interactive == 1) {
 		if (auto_start) {
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v14 5/6] lib: added new library for latency stats
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
                       ` (3 preceding siblings ...)
  2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
@ 2017-03-30 21:01     ` Remy Horton
  2017-04-05 14:24       ` Thomas Monjalon
  2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 6/6] app/test-pmd: add latency statistics calculation Remy Horton
  2017-04-05 16:01     ` [dpdk-dev] [PATCH v14 0/6] Expanded statistics reporting Thomas Monjalon
  6 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-03-30 21:01 UTC (permalink / raw)
  To: dev; +Cc: Reshma Pattan, Thomas Monjalon, Harry van Haaren

From: Reshma Pattan <reshma.pattan@intel.com>

Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
---
 MAINTAINERS                                        |   4 +
 config/common_base                                 |   5 +
 doc/api/doxy-api-index.md                          |   1 +
 doc/api/doxy-api.conf                              |   1 +
 doc/guides/prog_guide/metrics_lib.rst              |  54 +++
 doc/guides/rel_notes/release_17_05.rst             |   6 +
 lib/Makefile                                       |   2 +
 lib/librte_latencystats/Makefile                   |  56 ++++
 lib/librte_latencystats/rte_latencystats.c         | 361 +++++++++++++++++++++
 lib/librte_latencystats/rte_latencystats.h         | 154 +++++++++
 .../rte_latencystats_version.map                   |  11 +
 mk/rte.app.mk                                      |   1 +
 12 files changed, 656 insertions(+)
 create mode 100644 lib/librte_latencystats/Makefile
 create mode 100644 lib/librte_latencystats/rte_latencystats.c
 create mode 100644 lib/librte_latencystats/rte_latencystats.h
 create mode 100644 lib/librte_latencystats/rte_latencystats_version.map

diff --git a/MAINTAINERS b/MAINTAINERS
index 09afcd3..6a8cc37 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -634,6 +634,10 @@ Bit-rate statistics
 M: Remy Horton <remy.horton@intel.com>
 F: lib/librte_bitratestats/
 
+Latency statistics
+M: Reshma Pattan <reshma.pattan@intel.com>
+F: lib/librte_latencystats/
+
 
 Test Applications
 -----------------
diff --git a/config/common_base b/config/common_base
index 1b59174..87ebce7 100644
--- a/config/common_base
+++ b/config/common_base
@@ -637,3 +637,8 @@ CONFIG_RTE_APP_CRYPTO_PERF=y
 # Compile the bitrate statistics library
 #
 CONFIG_RTE_LIBRTE_BITRATE=y
+
+#
+# Compile the latency statistics library
+#
+CONFIG_RTE_LIBRTE_LATENCY_STATS=y
diff --git a/doc/api/doxy-api-index.md b/doc/api/doxy-api-index.md
index 18c8676..6c969a3 100644
--- a/doc/api/doxy-api-index.md
+++ b/doc/api/doxy-api-index.md
@@ -158,4 +158,5 @@ There are many libraries, so their headers may be grouped by topics:
   [keepalive]          (@ref rte_keepalive.h),
   [device metrics]     (@ref rte_metrics.h),
   [bitrate statistics] (@ref rte_bitrate.h),
+  [latency statistics] (@ref rte_latencystats.h),
   [version]            (@ref rte_version.h)
diff --git a/doc/api/doxy-api.conf b/doc/api/doxy-api.conf
index 7a971b6..a610eb9 100644
--- a/doc/api/doxy-api.conf
+++ b/doc/api/doxy-api.conf
@@ -49,6 +49,7 @@ INPUT                   = doc/api/doxy-api-index.md \
                           lib/librte_jobstats \
                           lib/librte_kni \
                           lib/librte_kvargs \
+                          lib/librte_latencystats \
                           lib/librte_lpm \
                           lib/librte_mbuf \
                           lib/librte_mempool \
diff --git a/doc/guides/prog_guide/metrics_lib.rst b/doc/guides/prog_guide/metrics_lib.rst
index 71c3a1b..702c29d 100644
--- a/doc/guides/prog_guide/metrics_lib.rst
+++ b/doc/guides/prog_guide/metrics_lib.rst
@@ -243,3 +243,57 @@ desired, this function should be called once a second.
 	    }
         /* ... */
     }
+
+
+Latency statistics library
+--------------------------
+
+The latency statistics library calculates the latency of packet
+processing by a DPDK application, reporting the minimum, average,
+and maximum nano-seconds that packet processing takes, as well as
+the jitter in processing delay. These statistics are then reported
+via the metrics library using the following names:
+
+    - ``min_latency_ns``: Minimum processing latency (nano-seconds)
+    - ``avg_latency_ns``:  Average  processing latency (nano-seconds)
+    - ``mac_latency_ns``:  Maximum  processing latency (nano-seconds)
+    - ``jitter_ns``: Variance in processing latency (nano-seconds)
+
+Once initialised and clocked at the appropriate frequency, these
+statistics can be obtained by querying the metrics library.
+
+Initialization
+~~~~~~~~~~~~~~
+
+Before the library can be used, it has to be initialised by calling
+``rte_latencystats_init()``.
+
+.. code-block:: c
+
+    lcoreid_t latencystats_lcore_id = -1;
+
+    int ret = rte_latencystats_init(1, NULL);
+    if (ret)
+        rte_exit(EXIT_FAILURE, "Could not allocate latency data.\n");
+
+
+Triggering statistic updates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The ``rte_latencystats_update()`` function needs to be called
+periodically so that latency statistics can be updated.
+
+.. code-block:: c
+
+    if (latencystats_lcore_id == rte_lcore_id())
+        rte_latencystats_update();
+
+Library shutdown
+~~~~~~~~~~~~~~~~
+
+When finished, ``rte_latencystats_uninit()`` needs to be called to
+de-initialise the latency library.
+
+.. code-block:: c
+
+    rte_latencystats_uninit();
diff --git a/doc/guides/rel_notes/release_17_05.rst b/doc/guides/rel_notes/release_17_05.rst
index 9699541..f21c7ca 100644
--- a/doc/guides/rel_notes/release_17_05.rst
+++ b/doc/guides/rel_notes/release_17_05.rst
@@ -100,6 +100,11 @@ Resolved Issues
   A library that can be used to calculate device bit-rates. Calculated
   bitrates are reported using the metrics library.
 
+* **Added latency stats library.**
+
+  A library that measures packet latency. The collected statistics are jitter
+  and latency. For latency the minimum, average, and maximum is measured.
+
 
 EAL
 ~~~
@@ -245,6 +250,7 @@ The libraries prepended with a plus sign were incremented in this version.
      librte_jobstats.so.1
      librte_kni.so.2
      librte_kvargs.so.1
+   + librte_latencystats.so.1
      librte_lpm.so.2
      librte_mbuf.so.2
      librte_mempool.so.2
diff --git a/lib/Makefile b/lib/Makefile
index 90ab559..8441365 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -72,6 +72,8 @@ DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
 DEPDIRS-librte_metrics := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
 DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ether
+DIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += librte_latencystats
+DEPDIRS-librte_latencystats := librte_ether librte_metrics librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
 DEPDIRS-librte_power := librte_eal
 DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
diff --git a/lib/librte_latencystats/Makefile b/lib/librte_latencystats/Makefile
new file mode 100644
index 0000000..4b96f3d
--- /dev/null
+++ b/lib/librte_latencystats/Makefile
@@ -0,0 +1,56 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2017 Intel Corporation. All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_latencystats.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+LDLIBS += -lm
+LDLIBS += -lpthread
+
+EXPORT_MAP := rte_latencystats_version.map
+
+LIBABIVER := 1
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) := rte_latencystats.c
+
+# install this header file
+SYMLINK-$(CONFIG_RTE_LIBRTE_LATENCY_STATS)-include := rte_latencystats.h
+
+# this lib depends upon:
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += lib/librte_metrics
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_latencystats/rte_latencystats.c b/lib/librte_latencystats/rte_latencystats.c
new file mode 100644
index 0000000..285b75c
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats.c
@@ -0,0 +1,361 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <sys/types.h>
+#include <stdbool.h>
+#include <math.h>
+
+#include <rte_mbuf.h>
+#include <rte_log.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_metrics.h>
+#include <rte_memzone.h>
+#include <rte_lcore.h>
+#include <rte_timer.h>
+
+#include "rte_latencystats.h"
+
+/** Nano seconds per second */
+#define NS_PER_SEC 1E9
+
+/** Clock cycles per nano second */
+static uint64_t
+latencystat_cycles_per_ns(void)
+{
+	return rte_get_timer_hz() / NS_PER_SEC;
+}
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_LATENCY_STATS RTE_LOGTYPE_USER1
+
+static const char *MZ_RTE_LATENCY_STATS = "rte_latencystats";
+static int latency_stats_index;
+static uint64_t samp_intvl;
+static uint64_t timer_tsc;
+static uint64_t prev_tsc;
+
+struct rte_latency_stats {
+	float min_latency; /**< Minimum latency in nano seconds */
+	float avg_latency; /**< Average latency in nano seconds */
+	float max_latency; /**< Maximum latency in nano seconds */
+	float jitter; /** Latency variation */
+};
+
+static struct rte_latency_stats *glob_stats;
+
+struct rxtx_cbs {
+	struct rte_eth_rxtx_callback *cb;
+};
+
+static struct rxtx_cbs rx_cbs[RTE_MAX_ETHPORTS][RTE_MAX_QUEUES_PER_PORT];
+static struct rxtx_cbs tx_cbs[RTE_MAX_ETHPORTS][RTE_MAX_QUEUES_PER_PORT];
+
+struct latency_stats_nameoff {
+	char name[RTE_ETH_XSTATS_NAME_SIZE];
+	unsigned int offset;
+};
+
+static const struct latency_stats_nameoff lat_stats_strings[] = {
+	{"min_latency_ns", offsetof(struct rte_latency_stats, min_latency)},
+	{"avg_latency_ns", offsetof(struct rte_latency_stats, avg_latency)},
+	{"max_latency_ns", offsetof(struct rte_latency_stats, max_latency)},
+	{"jitter_ns", offsetof(struct rte_latency_stats, jitter)},
+};
+
+#define NUM_LATENCY_STATS (sizeof(lat_stats_strings) / \
+				sizeof(lat_stats_strings[0]))
+
+int32_t
+rte_latencystats_update(void)
+{
+	unsigned int i;
+	float *stats_ptr = NULL;
+	uint64_t values[NUM_LATENCY_STATS] = {0};
+	int ret;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++) {
+		stats_ptr = RTE_PTR_ADD(glob_stats,
+				lat_stats_strings[i].offset);
+		values[i] = (uint64_t)floor((*stats_ptr)/
+				latencystat_cycles_per_ns());
+	}
+
+	ret = rte_metrics_update_values(RTE_METRICS_GLOBAL,
+					latency_stats_index,
+					values, NUM_LATENCY_STATS);
+	if (ret < 0)
+		RTE_LOG(INFO, LATENCY_STATS, "Failed to push the stats\n");
+
+	return ret;
+}
+
+static void
+rte_latencystats_fill_values(struct rte_metric_value *values)
+{
+	unsigned int i;
+	float *stats_ptr = NULL;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++) {
+		stats_ptr = RTE_PTR_ADD(glob_stats,
+				lat_stats_strings[i].offset);
+		values[i].key = i;
+		values[i].value = (uint64_t)floor((*stats_ptr)/
+						latencystat_cycles_per_ns());
+	}
+}
+
+static uint16_t
+add_time_stamps(uint8_t pid __rte_unused,
+		uint16_t qid __rte_unused,
+		struct rte_mbuf **pkts,
+		uint16_t nb_pkts,
+		uint16_t max_pkts __rte_unused,
+		void *user_cb __rte_unused)
+{
+	unsigned int i;
+	uint64_t diff_tsc, now;
+
+	/*
+	 * For every sample interval,
+	 * time stamp is marked on one received packet.
+	 */
+	now = rte_rdtsc();
+	for (i = 0; i < nb_pkts; i++) {
+		diff_tsc = now - prev_tsc;
+		timer_tsc += diff_tsc;
+		if (timer_tsc >= samp_intvl) {
+			pkts[i]->timestamp = now;
+			timer_tsc = 0;
+		}
+		prev_tsc = now;
+		now = rte_rdtsc();
+	}
+
+	return nb_pkts;
+}
+
+static uint16_t
+calc_latency(uint8_t pid __rte_unused,
+		uint16_t qid __rte_unused,
+		struct rte_mbuf **pkts,
+		uint16_t nb_pkts,
+		void *_ __rte_unused)
+{
+	unsigned int i, cnt = 0;
+	uint64_t now;
+	float latency[nb_pkts];
+	static float prev_latency;
+	/*
+	 * Alpha represents degree of weighting decrease in EWMA,
+	 * a constant smoothing factor between 0 and 1. The value
+	 * is used below for measuring average latency.
+	 */
+	const float alpha = 0.2;
+
+	now = rte_rdtsc();
+	for (i = 0; i < nb_pkts; i++) {
+		if (pkts[i]->timestamp)
+			latency[cnt++] = now - pkts[i]->timestamp;
+	}
+
+	for (i = 0; i < cnt; i++) {
+		/*
+		 * The jitter is calculated as statistical mean of interpacket
+		 * delay variation. The "jitter estimate" is computed by taking
+		 * the absolute values of the ipdv sequence and applying an
+		 * exponential filter with parameter 1/16 to generate the
+		 * estimate. i.e J=J+(|D(i-1,i)|-J)/16. Where J is jitter,
+		 * D(i-1,i) is difference in latency of two consecutive packets
+		 * i-1 and i.
+		 * Reference: Calculated as per RFC 5481, sec 4.1,
+		 * RFC 3393 sec 4.5, RFC 1889 sec.
+		 */
+		glob_stats->jitter +=  (abs(prev_latency - latency[i])
+					- glob_stats->jitter)/16;
+		if (glob_stats->min_latency == 0)
+			glob_stats->min_latency = latency[i];
+		else if (latency[i] < glob_stats->min_latency)
+			glob_stats->min_latency = latency[i];
+		else if (latency[i] > glob_stats->max_latency)
+			glob_stats->max_latency = latency[i];
+		/*
+		 * The average latency is measured using exponential moving
+		 * average, i.e. using EWMA
+		 * https://en.wikipedia.org/wiki/Moving_average
+		 */
+		glob_stats->avg_latency +=
+			alpha * (latency[i] - glob_stats->avg_latency);
+		prev_latency = latency[i];
+	}
+
+	return nb_pkts;
+}
+
+int
+rte_latencystats_init(uint64_t app_samp_intvl,
+		rte_latency_stats_flow_type_fn user_cb)
+{
+	unsigned int i;
+	uint8_t pid;
+	uint16_t qid;
+	struct rxtx_cbs *cbs = NULL;
+	const uint8_t nb_ports = rte_eth_dev_count();
+	const char *ptr_strings[NUM_LATENCY_STATS] = {0};
+	const struct rte_memzone *mz = NULL;
+	const unsigned int flags = 0;
+
+	if (rte_memzone_lookup(MZ_RTE_LATENCY_STATS))
+		return -EEXIST;
+
+	/** Allocate stats in shared memory fo multi process support */
+	mz = rte_memzone_reserve(MZ_RTE_LATENCY_STATS, sizeof(*glob_stats),
+					rte_socket_id(), flags);
+	if (mz == NULL) {
+		RTE_LOG(ERR, LATENCY_STATS, "Cannot reserve memory: %s:%d\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	glob_stats = mz->addr;
+	samp_intvl = app_samp_intvl * latencystat_cycles_per_ns();
+
+	/** Register latency stats with stats library */
+	for (i = 0; i < NUM_LATENCY_STATS; i++)
+		ptr_strings[i] = lat_stats_strings[i].name;
+
+	latency_stats_index = rte_metrics_reg_names(ptr_strings,
+							NUM_LATENCY_STATS);
+	if (latency_stats_index < 0) {
+		RTE_LOG(DEBUG, LATENCY_STATS,
+			"Failed to register latency stats names\n");
+		return -1;
+	}
+
+	/** Register Rx/Tx callbacks */
+	for (pid = 0; pid < nb_ports; pid++) {
+		struct rte_eth_dev_info dev_info;
+		rte_eth_dev_info_get(pid, &dev_info);
+		for (qid = 0; qid < dev_info.nb_rx_queues; qid++) {
+			cbs = &rx_cbs[pid][qid];
+			cbs->cb = rte_eth_add_first_rx_callback(pid, qid,
+					add_time_stamps, user_cb);
+			if (!cbs->cb)
+				RTE_LOG(INFO, LATENCY_STATS, "Failed to "
+					"register Rx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+		for (qid = 0; qid < dev_info.nb_tx_queues; qid++) {
+			cbs = &tx_cbs[pid][qid];
+			cbs->cb =  rte_eth_add_tx_callback(pid, qid,
+					calc_latency, user_cb);
+			if (!cbs->cb)
+				RTE_LOG(INFO, LATENCY_STATS, "Failed to "
+					"register Tx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+	}
+	return 0;
+}
+
+int
+rte_latencystats_uninit(void)
+{
+	uint8_t pid;
+	uint16_t qid;
+	int ret = 0;
+	struct rxtx_cbs *cbs = NULL;
+	const uint8_t nb_ports = rte_eth_dev_count();
+
+	/** De register Rx/Tx callbacks */
+	for (pid = 0; pid < nb_ports; pid++) {
+		struct rte_eth_dev_info dev_info;
+		rte_eth_dev_info_get(pid, &dev_info);
+		for (qid = 0; qid < dev_info.nb_rx_queues; qid++) {
+			cbs = &rx_cbs[pid][qid];
+			ret = rte_eth_remove_rx_callback(pid, qid, cbs->cb);
+			if (ret)
+				RTE_LOG(INFO, LATENCY_STATS, "failed to "
+					"remove Rx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+		for (qid = 0; qid < dev_info.nb_tx_queues; qid++) {
+			cbs = &tx_cbs[pid][qid];
+			ret = rte_eth_remove_tx_callback(pid, qid, cbs->cb);
+			if (ret)
+				RTE_LOG(INFO, LATENCY_STATS, "failed to "
+					"remove Tx callback for pid=%d, "
+					"qid=%d\n", pid, qid);
+		}
+	}
+
+	return 0;
+}
+
+int
+rte_latencystats_get_names(struct rte_metric_name *names, uint16_t size)
+{
+	unsigned int i;
+
+	if (names == NULL || size < NUM_LATENCY_STATS)
+		return NUM_LATENCY_STATS;
+
+	for (i = 0; i < NUM_LATENCY_STATS; i++)
+		snprintf(names[i].name, sizeof(names[i].name),
+				"%s", lat_stats_strings[i].name);
+
+	return NUM_LATENCY_STATS;
+}
+
+int
+rte_latencystats_get(struct rte_metric_value *values, uint16_t size)
+{
+	if (size < NUM_LATENCY_STATS || values == NULL)
+		return NUM_LATENCY_STATS;
+
+	if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+		const struct rte_memzone *mz;
+		mz = rte_memzone_lookup(MZ_RTE_LATENCY_STATS);
+		if (mz == NULL) {
+			RTE_LOG(ERR, LATENCY_STATS,
+				"Latency stats memzone not found\n");
+			return -ENOMEM;
+		}
+		glob_stats =  mz->addr;
+	}
+
+	/* Retrieve latency stats */
+	rte_latencystats_fill_values(values);
+
+	return NUM_LATENCY_STATS;
+}
diff --git a/lib/librte_latencystats/rte_latencystats.h b/lib/librte_latencystats/rte_latencystats.h
new file mode 100644
index 0000000..6efeaf4
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats.h
@@ -0,0 +1,154 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_LATENCYSTATS_H_
+#define _RTE_LATENCYSTATS_H_
+
+/**
+ * @file
+ * RTE latency stats
+ *
+ * library to provide application and flow based latency stats.
+ */
+
+#include <rte_metrics.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  Note: This function pointer is for future flow based latency stats
+ *  implementation.
+ *
+ * Function type used for identifting flow types of a Rx packet.
+ *
+ * The callback function is called on Rx for each packet.
+ * This function is used for flow based latency calculations.
+ *
+ * @param pkt
+ *   Packet that has to be identified with its flow types.
+ * @param user_param
+ *   The arbitrary user parameter passed in by the application when
+ *   the callback was originally configured.
+ * @return
+ *   The flow_mask, representing the multiple flow types of a packet.
+ */
+typedef uint16_t (*rte_latency_stats_flow_type_fn)(struct rte_mbuf *pkt,
+							void *user_param);
+
+/**
+ *  Registers Rx/Tx callbacks for each active port, queue.
+ *
+ * @param samp_intvl
+ *  Sampling time period in nano seconds, at which packet
+ *  should be marked with time stamp.
+ * @param user_cb
+ *  Note: This param is for future flow based latency stats
+ *  implementation.
+ *  User callback to be called to get flow types of a packet.
+ *  Used for flow based latency calculation.
+ *  If the value is NULL, global stats will be calculated,
+ *  else flow based latency stats will be calculated.
+ *  For now just pass on the NULL value to this param.
+ *  @return
+ *   -1     : On error
+ *   -ENOMEM: On error
+ *    0     : On success
+ */
+int rte_latencystats_init(uint64_t samp_intvl,
+			rte_latency_stats_flow_type_fn user_cb);
+
+/**
+ * Calculates the latency and jitter values internally, exposing the updated
+ * values via *rte_latencystats_get* or the rte_metrics API.
+ * @return:
+ *  0      : on Success
+ *  < 0    : Error in updating values.
+ */
+int32_t rte_latencystats_update(void);
+
+/**
+ *  Removes registered Rx/Tx callbacks for each active port, queue.
+ *
+ *  @return
+ *   -1: On error
+ *    0: On success
+ */
+int rte_latencystats_uninit(void);
+
+/**
+ * Retrieve names of latency statistics
+ *
+ * @param names
+ *  Block of memory to insert names into. Must be at least size in capacity.
+ *  If set to NULL, function returns required capacity.
+ * @param size
+ *  Capacity of latency stats names (number of names).
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ */
+int rte_latencystats_get_names(struct rte_metric_name *names,
+				uint16_t size);
+
+/**
+ * Retrieve latency statistics.
+ *
+ * @param values
+ *   A pointer to a table of structure of type *rte_metric_value*
+ *   to be filled with latency statistics ids and values.
+ *   This parameter can be set to NULL if size is 0.
+ * @param size
+ *   The size of the stats table, which should be large enough to store
+ *   all the latency stats.
+ * @return
+ *   - positive value lower or equal to size: success. The return value
+ *     is the number of entries filled in the stats table.
+ *   - positive value higher than size: error, the given statistics table
+ *     is too small. The return value corresponds to the size that should
+ *     be given to succeed. The entries in the table are not valid and
+ *     shall not be used by the caller.
+ *   -ENOMEM: On failure.
+ */
+int rte_latencystats_get(struct rte_metric_value *values,
+			uint16_t size);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_LATENCYSTATS_H_ */
diff --git a/lib/librte_latencystats/rte_latencystats_version.map b/lib/librte_latencystats/rte_latencystats_version.map
new file mode 100644
index 0000000..ac8403e
--- /dev/null
+++ b/lib/librte_latencystats/rte_latencystats_version.map
@@ -0,0 +1,11 @@
+DPDK_17.05 {
+	global:
+
+	rte_latencystats_get;
+	rte_latencystats_get_names;
+	rte_latencystats_init;
+	rte_latencystats_uninit;
+	rte_latencystats_update;
+
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 7104a8b..fc0e877 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -100,6 +100,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
 _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
 _LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
 _LDLIBS-$(CONFIG_RTE_LIBRTE_BITRATE)        += -lrte_bitratestats
+_LDLIBS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS)  += -lrte_latencystats
 
 ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n)
 # plugins (link only if static libraries)
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* [dpdk-dev] [PATCH v14 6/6] app/test-pmd: add latency statistics calculation
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
                       ` (4 preceding siblings ...)
  2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 5/6] lib: added new library for latency stats Remy Horton
@ 2017-03-30 21:01     ` Remy Horton
  2017-04-05 16:01     ` [dpdk-dev] [PATCH v14 0/6] Expanded statistics reporting Thomas Monjalon
  6 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-03-30 21:01 UTC (permalink / raw)
  To: dev; +Cc: Reshma Pattan, Thomas Monjalon, Harry van Haaren

From: Reshma Pattan <reshma.pattan@intel.com>

This patch adds latency stats commandline argument to testpmd,
allowing to specify the lcore to use for latencystats updates.

Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
---
 app/test-pmd/parameters.c | 22 +++++++++++++++++++++-
 app/test-pmd/testpmd.c    | 37 +++++++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.h    |  8 +++++++-
 3 files changed, 65 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 28db8cd..f92fb4a 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -149,6 +149,10 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	printf("  --latencystats=N: enable latency and jitter statistcs "
+	       "monitoring on forwarding lcore id N.\n");
+#endif
 	printf("  --crc-strip: enable CRC stripping by hardware.\n");
 	printf("  --enable-lro: enable large receive offload.\n");
 	printf("  --enable-rx-cksum: enable rx hardware checksum offload.\n");
@@ -526,6 +530,9 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		{ "latencystats",               1, 0, 0 },
+#endif
 		{ "crc-strip",                  0, 0, 0 },
 		{ "enable-lro",                 0, 0, 0 },
 		{ "enable-rx-cksum",            0, 0, 0 },
@@ -766,6 +773,19 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
+#ifdef RTE_LIBRTE_LATENCY_STATS
+			if (!strcmp(lgopts[opt_idx].name,
+				    "latencystats")) {
+				n = atoi(optarg);
+				if (n >= 0) {
+					latencystats_lcore_id = (lcoreid_t) n;
+					latencystats_enabled = 1;
+				} else
+					rte_exit(EXIT_FAILURE,
+						 "invalid lcore id %d for latencystats"
+						 " must be >= 0\n", n);
+			}
+#endif
 			if (!strcmp(lgopts[opt_idx].name, "crc-strip"))
 				rx_mode.hw_strip_crc = 1;
 			if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index fc96f36..e36b61f 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -83,6 +83,10 @@
 #ifdef RTE_LIBRTE_BITRATE
 #include <rte_bitrate.h>
 #endif
+#include <rte_metrics.h>
+#ifdef RTE_LIBRTE_LATENCY_STATS
+#include <rte_latencystats.h>
+#endif
 
 #include "testpmd.h"
 
@@ -276,6 +280,20 @@ uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
 
 #endif
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+
+/*
+ * Set when latency stats is enabled in the commandline
+ */
+uint8_t latencystats_enabled;
+
+/*
+ * Lcore ID to serive latency statistics.
+ */
+lcoreid_t latencystats_lcore_id = -1;
+
+#endif
+
 /*
  * Ethernet device configuration.
  */
@@ -953,6 +971,11 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 			tics_datum = tics_current;
 		}
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		if (latencystats_lcore_id == rte_lcore_id())
+			rte_latencystats_update();
+#endif
+
 	} while (! fc->stopped);
 }
 
@@ -2106,6 +2129,9 @@ signal_handler(int signum)
 		/* uninitialize packet capture framework */
 		rte_pdump_uninit();
 #endif
+#ifdef RTE_LIBRTE_LATENCY_STATS
+		rte_latencystats_uninit();
+#endif
 		force_quit();
 		/* exit with the expected status */
 		signal(signum, SIG_DFL);
@@ -2167,6 +2193,17 @@ main(int argc, char** argv)
 	/* Init metrics library */
 	rte_metrics_init(rte_socket_id());
 
+#ifdef RTE_LIBRTE_LATENCY_STATS
+	if (latencystats_enabled != 0) {
+		int ret = rte_latencystats_init(1, NULL);
+		if (ret)
+			printf("Warning: latencystats init()"
+				" returned error %d\n",	ret);
+		printf("Latencystats running on lcore %d\n",
+			latencystats_lcore_id);
+	}
+#endif
+
 	/* Setup bitrate stats */
 #ifdef RTE_LIBRTE_BITRATE
 	bitrate_data = rte_stats_bitrate_create();
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 8cf2860..bd0fc42 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1,7 +1,7 @@
 /*-
  *   BSD LICENSE
  *
- *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
  *   All rights reserved.
  *
  *   Redistribution and use in source and binary forms, with or without
@@ -381,6 +381,12 @@ extern enum dcb_queue_mapping_mode dcb_q_mapping;
 extern uint16_t mbuf_data_size; /**< Mbuf data space size. */
 extern uint32_t param_total_num_mbufs;
 
+
+#ifdef RTE_LIBRTE_LATENCY_STATS
+extern uint8_t latencystats_enabled;
+extern lcoreid_t latencystats_lcore_id;
+#endif
+
 extern struct rte_fdir_conf fdir_conf;
 
 /*
-- 
2.5.5

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library
  2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library Remy Horton
@ 2017-04-05 13:39       ` Thomas Monjalon
  2017-04-05 14:46         ` Remy Horton
  0 siblings, 1 reply; 41+ messages in thread
From: Thomas Monjalon @ 2017-04-05 13:39 UTC (permalink / raw)
  To: Remy Horton; +Cc: dev

2017-03-30 22:00, Remy Horton:
> --- a/mk/rte.app.mk
> +++ b/mk/rte.app.mk
> @@ -98,6 +98,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_RING)           += -lrte_ring
>  _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL)            += -lrte_eal
>  _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE)        += -lrte_cmdline
>  _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER)        += -lrte_reorder
> +_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics

It should not be added here in --whole-archive as it is not going to be
used by plugins (drivers).

I suggest moving it upper with rte_jobstats.

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 5/6] lib: added new library for latency stats
  2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 5/6] lib: added new library for latency stats Remy Horton
@ 2017-04-05 14:24       ` Thomas Monjalon
  2017-04-05 14:34         ` Remy Horton
  0 siblings, 1 reply; 41+ messages in thread
From: Thomas Monjalon @ 2017-04-05 14:24 UTC (permalink / raw)
  To: Remy Horton, Reshma Pattan; +Cc: dev, Harry van Haaren

2017-03-30 22:01, Remy Horton:
> +               /*
> +                * The jitter is calculated as statistical mean of interpacket
> +                * delay variation. The "jitter estimate" is computed by taking
> +                * the absolute values of the ipdv sequence and applying an
> +                * exponential filter with parameter 1/16 to generate the
> +                * estimate. i.e J=J+(|D(i-1,i)|-J)/16. Where J is jitter,
> +                * D(i-1,i) is difference in latency of two consecutive packets
> +                * i-1 and i.
> +                * Reference: Calculated as per RFC 5481, sec 4.1,
> +                * RFC 3393 sec 4.5, RFC 1889 sec.
> +                */
> +               glob_stats->jitter +=  (abs(prev_latency - latency[i])
> +                                       - glob_stats->jitter)/16;
> 

lib/librte_latencystats/rte_latencystats.c:204:27: fatal error:
using integer absolute value function 'abs'
when argument is of floating point type [-Wabsolute-value]
                glob_stats->jitter +=  (abs(prev_latency - latency[i])
                                        ^
note: use function 'fabsf' instead

I am a bit sad to see such error at v14.
Do you want I fix it for you?

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 5/6] lib: added new library for latency stats
  2017-04-05 14:24       ` Thomas Monjalon
@ 2017-04-05 14:34         ` Remy Horton
  0 siblings, 0 replies; 41+ messages in thread
From: Remy Horton @ 2017-04-05 14:34 UTC (permalink / raw)
  To: Thomas Monjalon, Reshma Pattan; +Cc: dev, Harry van Haaren


On 05/04/2017 15:24, Thomas Monjalon wrote:
> 2017-03-30 22:01, Remy Horton:
[..]
> lib/librte_latencystats/rte_latencystats.c:204:27: fatal error:
> using integer absolute value function 'abs'
> when argument is of floating point type [-Wabsolute-value]
>                 glob_stats->jitter +=  (abs(prev_latency - latency[i])

Looks like Clang being stricter than GCC..


> Do you want I fix it for you?

Ok with me.

..Remy

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library
  2017-04-05 13:39       ` Thomas Monjalon
@ 2017-04-05 14:46         ` Remy Horton
  2017-04-05 15:06           ` Thomas Monjalon
  0 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-04-05 14:46 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev


On 05/04/2017 14:39, Thomas Monjalon wrote:
> 2017-03-30 22:00, Remy Horton:
>> --- a/mk/rte.app.mk
>> +++ b/mk/rte.app.mk
[..]
>> +_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
>
> It should not be added here in --whole-archive as it is not going to be
> used by plugins (drivers).
>
> I suggest moving it upper with rte_jobstats.

Ok.

As an aside, there seems to have been recent changes to the build 
system, so I suspect there might be a few redundant Makefile additions 
lying around the patchset.

..Remy

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library
  2017-04-05 14:46         ` Remy Horton
@ 2017-04-05 15:06           ` Thomas Monjalon
  2017-04-05 15:16             ` Remy Horton
  0 siblings, 1 reply; 41+ messages in thread
From: Thomas Monjalon @ 2017-04-05 15:06 UTC (permalink / raw)
  To: Remy Horton; +Cc: dev

2017-04-05 15:46, Remy Horton:
> 
> On 05/04/2017 14:39, Thomas Monjalon wrote:
> > 2017-03-30 22:00, Remy Horton:
> >> --- a/mk/rte.app.mk
> >> +++ b/mk/rte.app.mk
> [..]
> >> +_LDLIBS-$(CONFIG_RTE_LIBRTE_METRICS)        += -lrte_metrics
> >
> > It should not be added here in --whole-archive as it is not going to be
> > used by plugins (drivers).
> >
> > I suggest moving it upper with rte_jobstats.
> 
> Ok.
> 
> As an aside, there seems to have been recent changes to the build 
> system, so I suspect there might be a few redundant Makefile additions 
> lying around the patchset.

Do you mean DEPDIRS-$(CONFIG_RTE_LIBRTE_METRICS) et al?
I can remove them if you confirm. 

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library
  2017-04-05 15:06           ` Thomas Monjalon
@ 2017-04-05 15:16             ` Remy Horton
  2017-04-05 15:23               ` Thomas Monjalon
  0 siblings, 1 reply; 41+ messages in thread
From: Remy Horton @ 2017-04-05 15:16 UTC (permalink / raw)
  To: Thomas Monjalon; +Cc: dev


On 05/04/2017 16:06, Thomas Monjalon wrote:
[..]
> Do you mean DEPDIRS-$(CONFIG_RTE_LIBRTE_METRICS) et al?
> I can remove them if you confirm.

The ones in lib/librte_*/Makefile - yes those ones. I think they can be 
removed as feb9f680cd2c ("mk: optimize directory dependencies") changed 
the system to use ones in lib/Makefile instead.

..Remy

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library
  2017-04-05 15:16             ` Remy Horton
@ 2017-04-05 15:23               ` Thomas Monjalon
  0 siblings, 0 replies; 41+ messages in thread
From: Thomas Monjalon @ 2017-04-05 15:23 UTC (permalink / raw)
  To: Remy Horton; +Cc: dev

2017-04-05 16:16, Remy Horton:
> 
> On 05/04/2017 16:06, Thomas Monjalon wrote:
> [..]
> > Do you mean DEPDIRS-$(CONFIG_RTE_LIBRTE_METRICS) et al?
> > I can remove them if you confirm.
> 
> The ones in lib/librte_*/Makefile - yes those ones. I think they can be 
> removed as feb9f680cd2c ("mk: optimize directory dependencies") changed 
> the system to use ones in lib/Makefile instead.

Yes, and mbuf was missing in lib/Makefile for latencystats.

^ permalink raw reply	[flat|nested] 41+ messages in thread

* Re: [dpdk-dev] [PATCH v14 0/6] Expanded statistics reporting
  2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
                       ` (5 preceding siblings ...)
  2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 6/6] app/test-pmd: add latency statistics calculation Remy Horton
@ 2017-04-05 16:01     ` Thomas Monjalon
  6 siblings, 0 replies; 41+ messages in thread
From: Thomas Monjalon @ 2017-04-05 16:01 UTC (permalink / raw)
  To: Remy Horton; +Cc: dev

2017-03-30 22:00, Remy Horton:
> This patchset consists of three libraries: A Metrics library for
> distributing device information, a library that calculates bit-rate
> statistics, and a library that calculates latency statistics. The
> latter two libraries make use of the first library.

I have fixed makefiles and compilation as discussed in separate emails.
I have also moved the texts in release notes which was in "Resolved Issues".

Applied, thanks

^ permalink raw reply	[flat|nested] 41+ messages in thread

end of thread, other threads:[~2017-04-05 16:02 UTC | newest]

Thread overview: 41+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-27 20:21 [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Remy Horton
2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 1/6] lib: add information metrics library Remy Horton
2017-03-28 14:14   ` Pattan, Reshma
2017-03-28 15:00     ` Remy Horton
2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 2/6] app/proc_info: add metrics displaying Remy Horton
2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 3/6] lib: add bitrate statistics library Remy Horton
2017-03-28 15:30   ` Pattan, Reshma
2017-03-28 15:45     ` Remy Horton
2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
2017-03-28 15:49   ` Pattan, Reshma
2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 5/6] lib: added new library for latency stats Remy Horton
2017-03-27 20:21 ` [dpdk-dev] [PATCH v12 6/6] app/test-pmd: add latency statistics calculation Remy Horton
2017-03-27 21:03 ` [dpdk-dev] [PATCH v12 0/6] Expanded statistics reporting Stephen Hemminger
2017-03-28 11:21   ` Mcnamara, John
2017-03-29 18:28 ` [dpdk-dev] [PATCH v13 " Remy Horton
2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 1/6] lib: add information metrics library Remy Horton
2017-03-30 10:01     ` Pattan, Reshma
2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 2/6] app/proc_info: add metrics displaying Remy Horton
2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 3/6] lib: add bitrate statistics library Remy Horton
2017-03-30 10:04     ` Pattan, Reshma
2017-03-30 10:08     ` Pattan, Reshma
2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 5/6] lib: added new library for latency stats Remy Horton
2017-03-29 18:28   ` [dpdk-dev] [PATCH v13 6/6] app/test-pmd: add latency statistics calculation Remy Horton
2017-03-30 10:22     ` Pattan, Reshma
2017-03-30 13:18   ` [dpdk-dev] [PATCH v13 0/6] Expanded statistics reporting Pattan, Reshma
2017-03-30 21:00   ` [dpdk-dev] [PATCH v14 " Remy Horton
2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 1/6] lib: add information metrics library Remy Horton
2017-04-05 13:39       ` Thomas Monjalon
2017-04-05 14:46         ` Remy Horton
2017-04-05 15:06           ` Thomas Monjalon
2017-04-05 15:16             ` Remy Horton
2017-04-05 15:23               ` Thomas Monjalon
2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 2/6] app/proc_info: add metrics displaying Remy Horton
2017-03-30 21:00     ` [dpdk-dev] [PATCH v14 3/6] lib: add bitrate statistics library Remy Horton
2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 4/6] app/test-pmd: add bitrate statistics calculation Remy Horton
2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 5/6] lib: added new library for latency stats Remy Horton
2017-04-05 14:24       ` Thomas Monjalon
2017-04-05 14:34         ` Remy Horton
2017-03-30 21:01     ` [dpdk-dev] [PATCH v14 6/6] app/test-pmd: add latency statistics calculation Remy Horton
2017-04-05 16:01     ` [dpdk-dev] [PATCH v14 0/6] Expanded statistics reporting Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).