This is a very simple example app for doing packet forwarding with the Intel DPDK. It's designed to serve as a start point for people new to the Intel DPDK and who want to develop a new app. Therefore it's meant to: * have as good a performance out-of-the-box as possible, using the best-known settings for configuring the PMDs, so that any new apps can be based off it. * be kept as short as possible to make it easy to understand it and get started with it. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- examples/Makefile | 1 + examples/skeleton_app/Makefile | 57 ++++++++++ examples/skeleton_app/basicfwd.c | 236 +++++++++++++++++++++++++++++++++++++++ examples/skeleton_app/basicfwd.h | 46 ++++++++ 4 files changed, 340 insertions(+) create mode 100644 examples/skeleton_app/Makefile create mode 100644 examples/skeleton_app/basicfwd.c create mode 100644 examples/skeleton_app/basicfwd.h diff --git a/examples/Makefile b/examples/Makefile index 4353b84..2605d1d 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -60,6 +60,7 @@ DIRS-y += netmap_compat/bridge DIRS-$(CONFIG_RTE_LIBRTE_METER) += qos_meter DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += qos_sched DIRS-y += quota_watermark +DIRS-y += skeleton_app DIRS-y += timer DIRS-y += vhost DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen diff --git a/examples/skeleton_app/Makefile b/examples/skeleton_app/Makefile new file mode 100644 index 0000000..244f4ef --- /dev/null +++ b/examples/skeleton_app/Makefile @@ -0,0 +1,57 @@ +# BSD LICENSE +# +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +ifeq ($(RTE_SDK),) +$(error "Please define RTE_SDK environment variable") +endif + +# Default target, can be overriden by command line or environment +RTE_TARGET ?= x86_64-default-linuxapp-gcc + +include $(RTE_SDK)/mk/rte.vars.mk + +# binary name +APP = basicfwd + +# all source are stored in SRCS-y +SRCS-y := basicfwd.c + +CFLAGS += $(WERROR_FLAGS) + +# workaround for a gcc bug with noreturn attribute +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) +CFLAGS_main.o += -Wno-return-type +endif + +EXTRA_CFLAGS += -O3 -g -Wfatal-errors + +include $(RTE_SDK)/mk/rte.extapp.mk diff --git a/examples/skeleton_app/basicfwd.c b/examples/skeleton_app/basicfwd.c new file mode 100644 index 0000000..bf51a9d --- /dev/null +++ b/examples/skeleton_app/basicfwd.c @@ -0,0 +1,236 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <stdint.h> +#include <inttypes.h> +#include <rte_eal.h> +#include <rte_ethdev.h> +#include <rte_cycles.h> +#include <rte_lcore.h> +#include <rte_mbuf.h> +#include "basicfwd.h" + +#define RX_RING_SIZE 128 +#define RX_FREE_THRESH 32 +#define RX_PTHRESH 8 +#define RX_HTHRESH 8 +#define RX_WTHRESH 0 + +#define TX_RING_SIZE 512 +#define TX_FREE_THRESH 32 +#define TX_PTHRESH 32 +#define TX_HTHRESH 0 +#define TX_WTHRESH 0 +#define TX_RSBIT_THRESH 32 +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\ + ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \ + ETH_TXQ_FLAGS_NOXSUMTCP) + +#define NUM_MBUFS 8191 +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM) +#define MBUF_CACHE_SIZE 250 +#define BURST_SIZE 32 + +static struct rte_eth_conf port_conf_default = { + .rxmode = { + .mq_mode = ETH_MQ_RX_NONE, + .max_rx_pkt_len = ETHER_MAX_LEN, + .split_hdr_size = 0, + .header_split = 0, /**< Header Split disabled */ + .hw_ip_checksum = 0, /**< IP checksum offload enabled */ + .hw_vlan_filter = 0, /**< VLAN filtering disabled */ + .jumbo_frame = 0, /**< Jumbo Frame Support disabled */ + .hw_strip_crc = 0, /**< CRC stripped by hardware */ + }, + .txmode = { + .mq_mode = ETH_MQ_TX_NONE, + }, + .lpbk_mode = 0, +}; + +static const struct rte_eth_rxconf rx_conf_default = { + .rx_thresh = { + .pthresh = RX_PTHRESH, + .hthresh = RX_HTHRESH, + .wthresh = RX_WTHRESH, + }, + .rx_free_thresh = RX_FREE_THRESH, + .rx_drop_en = 0, +}; + +static struct rte_eth_txconf tx_conf_default = { + .tx_thresh = { + .pthresh = TX_PTHRESH, + .hthresh = TX_HTHRESH, + .wthresh = TX_WTHRESH, + }, + .tx_free_thresh = TX_FREE_THRESH, + .tx_rs_thresh = TX_RSBIT_THRESH, + .txq_flags = TX_Q_FLAGS + +}; + + +/* + * Initialises a given port using global settings and with the rx buffers + * coming from the mbuf_pool passed as parameter + */ +static inline int +port_init(uint8_t port, struct rte_mempool *mbuf_pool) +{ + struct rte_eth_conf port_conf = port_conf_default; + const uint16_t rxRings = 1, txRings = 1; + int retval; + uint16_t q; + + if (port >= rte_eth_dev_count()) + return -1; + + retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf); + if (retval != 0) + return retval; + + for (q = 0; q < rxRings; q++) { + retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE, + rte_eth_dev_socket_id(port), &rx_conf_default, + mbuf_pool); + if (retval < 0) + return retval; + } + + for (q = 0; q < txRings; q++) { + retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE, + rte_eth_dev_socket_id(port), &tx_conf_default); + if (retval < 0) + return retval; + } + + retval = rte_eth_dev_start(port); + if (retval < 0) + return retval; + + struct ether_addr addr; + rte_eth_macaddr_get(port, &addr); + printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8 + " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n", + (unsigned)port, + addr.addr_bytes[0], addr.addr_bytes[1], + addr.addr_bytes[2], addr.addr_bytes[3], + addr.addr_bytes[4], addr.addr_bytes[5]); + + rte_eth_promiscuous_enable(port); + + return 0; +} + +/* + * Main thread that does the work, reading from INPUT_PORT + * and writing to OUTPUT_PORT + */ +static __attribute__((noreturn)) void +lcore_main(void) +{ + const uint8_t nb_ports = rte_eth_dev_count(); + uint8_t port; + for (port = 0; port < nb_ports; port++) + if (rte_eth_dev_socket_id(port) > 0 && + rte_eth_dev_socket_id(port) != + (int)rte_socket_id()) + printf("WARNING, port %u is on remote NUMA node to " + "polling thread.\n\tPerformance will " + "not be optimal.\n", port); + + printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n", + rte_lcore_id()); + for (;;) { + for (port = 0; port < nb_ports; port++) { + struct rte_mbuf *bufs[BURST_SIZE]; + const uint16_t nb_rx = rte_eth_rx_burst(port, 0, + bufs, BURST_SIZE); + if (unlikely(nb_rx == 0)) + continue; + const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0, + bufs, nb_rx); + if (unlikely(nb_tx < nb_rx)) { + uint16_t buf; + for (buf = nb_tx; buf < nb_rx; buf++) + rte_pktmbuf_free(bufs[buf]); + } + } + } +} + +/* Main function, does initialisation and calls the per-lcore functions */ +int +MAIN(int argc, char *argv[]) +{ + struct rte_mempool *mbuf_pool; + unsigned nb_ports; + uint8_t portid; + + /* init EAL */ + int ret = rte_eal_init(argc, argv); + if (ret < 0) + rte_exit(EXIT_FAILURE, "Error with EAL initialization\n"); + argc -= ret; + argv += ret; + + if (rte_eal_pci_probe() != 0) + rte_exit(EXIT_FAILURE, "Error with PCI probing\n"); + + nb_ports = rte_eth_dev_count(); + if (nb_ports < 2 || (nb_ports & 1)) + rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n"); + + mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports, + MBUF_SIZE, MBUF_CACHE_SIZE, + sizeof(struct rte_pktmbuf_pool_private), + rte_pktmbuf_pool_init, NULL, + rte_pktmbuf_init, NULL, + rte_socket_id(), 0); + if (mbuf_pool == NULL) + rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n"); + + /* initialize all ports */ + for (portid = 0; portid < nb_ports; portid++) + if (port_init(portid, mbuf_pool) != 0) + rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8"\n", + portid); + + if (rte_lcore_count() > 1) + printf("\nWARNING: Coremask too big - App uses only 1 lcore\n"); + + /* call lcore_main on master core only */ + lcore_main(); + return 0; +} diff --git a/examples/skeleton_app/basicfwd.h b/examples/skeleton_app/basicfwd.h new file mode 100644 index 0000000..2682d15 --- /dev/null +++ b/examples/skeleton_app/basicfwd.h @@ -0,0 +1,46 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _MAIN_H_ +#define _MAIN_H_ + + +#ifdef RTE_EXEC_ENV_BAREMETAL +#define MAIN _main +#else +#define MAIN main +#endif + +int MAIN(int argc, char *argv[]); + +#endif /* ifndef _MAIN_H_ */ -- 1.9.3
On Thu, Jun 26, 2014 at 09:22:40PM +0100, Bruce Richardson wrote: > This is a very simple example app for doing packet forwarding with the > Intel DPDK. It's designed to serve as a start point for people new to > the Intel DPDK and who want to develop a new app. > > Therefore it's meant to: > * have as good a performance out-of-the-box as possible, using the > best-known settings for configuring the PMDs, so that any new apps can > be based off it. > * be kept as short as possible to make it easy to understand it and get > started with it. > > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Isn't there already an l2fwd example app? Neil > --- > examples/Makefile | 1 + > examples/skeleton_app/Makefile | 57 ++++++++++ > examples/skeleton_app/basicfwd.c | 236 +++++++++++++++++++++++++++++++++++++++ > examples/skeleton_app/basicfwd.h | 46 ++++++++ > 4 files changed, 340 insertions(+) > create mode 100644 examples/skeleton_app/Makefile > create mode 100644 examples/skeleton_app/basicfwd.c > create mode 100644 examples/skeleton_app/basicfwd.h > > diff --git a/examples/Makefile b/examples/Makefile > index 4353b84..2605d1d 100644 > --- a/examples/Makefile > +++ b/examples/Makefile > @@ -60,6 +60,7 @@ DIRS-y += netmap_compat/bridge > DIRS-$(CONFIG_RTE_LIBRTE_METER) += qos_meter > DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += qos_sched > DIRS-y += quota_watermark > +DIRS-y += skeleton_app > DIRS-y += timer > DIRS-y += vhost > DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen > diff --git a/examples/skeleton_app/Makefile b/examples/skeleton_app/Makefile > new file mode 100644 > index 0000000..244f4ef > --- /dev/null > +++ b/examples/skeleton_app/Makefile > @@ -0,0 +1,57 @@ > +# BSD LICENSE > +# > +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved. > +# All rights reserved. > +# > +# Redistribution and use in source and binary forms, with or without > +# modification, are permitted provided that the following conditions > +# are met: > +# > +# * Redistributions of source code must retain the above copyright > +# notice, this list of conditions and the following disclaimer. > +# * Redistributions in binary form must reproduce the above copyright > +# notice, this list of conditions and the following disclaimer in > +# the documentation and/or other materials provided with the > +# distribution. > +# * Neither the name of Intel Corporation nor the names of its > +# contributors may be used to endorse or promote products derived > +# from this software without specific prior written permission. > +# > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR > +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT > +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT > +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, > +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY > +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + > +ifeq ($(RTE_SDK),) > +$(error "Please define RTE_SDK environment variable") > +endif > + > +# Default target, can be overriden by command line or environment > +RTE_TARGET ?= x86_64-default-linuxapp-gcc > + > +include $(RTE_SDK)/mk/rte.vars.mk > + > +# binary name > +APP = basicfwd > + > +# all source are stored in SRCS-y > +SRCS-y := basicfwd.c > + > +CFLAGS += $(WERROR_FLAGS) > + > +# workaround for a gcc bug with noreturn attribute > +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 > +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) > +CFLAGS_main.o += -Wno-return-type > +endif > + > +EXTRA_CFLAGS += -O3 -g -Wfatal-errors > + > +include $(RTE_SDK)/mk/rte.extapp.mk > diff --git a/examples/skeleton_app/basicfwd.c b/examples/skeleton_app/basicfwd.c > new file mode 100644 > index 0000000..bf51a9d > --- /dev/null > +++ b/examples/skeleton_app/basicfwd.c > @@ -0,0 +1,236 @@ > +/*- > + * BSD LICENSE > + * > + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. > + * All rights reserved. > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions > + * are met: > + * > + * * Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * * Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in > + * the documentation and/or other materials provided with the > + * distribution. > + * * Neither the name of Intel Corporation nor the names of its > + * contributors may be used to endorse or promote products derived > + * from this software without specific prior written permission. > + * > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + */ > + > +#include <stdint.h> > +#include <inttypes.h> > +#include <rte_eal.h> > +#include <rte_ethdev.h> > +#include <rte_cycles.h> > +#include <rte_lcore.h> > +#include <rte_mbuf.h> > +#include "basicfwd.h" > + > +#define RX_RING_SIZE 128 > +#define RX_FREE_THRESH 32 > +#define RX_PTHRESH 8 > +#define RX_HTHRESH 8 > +#define RX_WTHRESH 0 > + > +#define TX_RING_SIZE 512 > +#define TX_FREE_THRESH 32 > +#define TX_PTHRESH 32 > +#define TX_HTHRESH 0 > +#define TX_WTHRESH 0 > +#define TX_RSBIT_THRESH 32 > +#define TX_Q_FLAGS (ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOVLANOFFL |\ > + ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \ > + ETH_TXQ_FLAGS_NOXSUMTCP) > + > +#define NUM_MBUFS 8191 > +#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM) > +#define MBUF_CACHE_SIZE 250 > +#define BURST_SIZE 32 > + > +static struct rte_eth_conf port_conf_default = { > + .rxmode = { > + .mq_mode = ETH_MQ_RX_NONE, > + .max_rx_pkt_len = ETHER_MAX_LEN, > + .split_hdr_size = 0, > + .header_split = 0, /**< Header Split disabled */ > + .hw_ip_checksum = 0, /**< IP checksum offload enabled */ > + .hw_vlan_filter = 0, /**< VLAN filtering disabled */ > + .jumbo_frame = 0, /**< Jumbo Frame Support disabled */ > + .hw_strip_crc = 0, /**< CRC stripped by hardware */ > + }, > + .txmode = { > + .mq_mode = ETH_MQ_TX_NONE, > + }, > + .lpbk_mode = 0, > +}; > + > +static const struct rte_eth_rxconf rx_conf_default = { > + .rx_thresh = { > + .pthresh = RX_PTHRESH, > + .hthresh = RX_HTHRESH, > + .wthresh = RX_WTHRESH, > + }, > + .rx_free_thresh = RX_FREE_THRESH, > + .rx_drop_en = 0, > +}; > + > +static struct rte_eth_txconf tx_conf_default = { > + .tx_thresh = { > + .pthresh = TX_PTHRESH, > + .hthresh = TX_HTHRESH, > + .wthresh = TX_WTHRESH, > + }, > + .tx_free_thresh = TX_FREE_THRESH, > + .tx_rs_thresh = TX_RSBIT_THRESH, > + .txq_flags = TX_Q_FLAGS > + > +}; > + > + > +/* > + * Initialises a given port using global settings and with the rx buffers > + * coming from the mbuf_pool passed as parameter > + */ > +static inline int > +port_init(uint8_t port, struct rte_mempool *mbuf_pool) > +{ > + struct rte_eth_conf port_conf = port_conf_default; > + const uint16_t rxRings = 1, txRings = 1; > + int retval; > + uint16_t q; > + > + if (port >= rte_eth_dev_count()) > + return -1; > + > + retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf); > + if (retval != 0) > + return retval; > + > + for (q = 0; q < rxRings; q++) { > + retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE, > + rte_eth_dev_socket_id(port), &rx_conf_default, > + mbuf_pool); > + if (retval < 0) > + return retval; > + } > + > + for (q = 0; q < txRings; q++) { > + retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE, > + rte_eth_dev_socket_id(port), &tx_conf_default); > + if (retval < 0) > + return retval; > + } > + > + retval = rte_eth_dev_start(port); > + if (retval < 0) > + return retval; > + > + struct ether_addr addr; > + rte_eth_macaddr_get(port, &addr); > + printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8 > + " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n", > + (unsigned)port, > + addr.addr_bytes[0], addr.addr_bytes[1], > + addr.addr_bytes[2], addr.addr_bytes[3], > + addr.addr_bytes[4], addr.addr_bytes[5]); > + > + rte_eth_promiscuous_enable(port); > + > + return 0; > +} > + > +/* > + * Main thread that does the work, reading from INPUT_PORT > + * and writing to OUTPUT_PORT > + */ > +static __attribute__((noreturn)) void > +lcore_main(void) > +{ > + const uint8_t nb_ports = rte_eth_dev_count(); > + uint8_t port; > + for (port = 0; port < nb_ports; port++) > + if (rte_eth_dev_socket_id(port) > 0 && > + rte_eth_dev_socket_id(port) != > + (int)rte_socket_id()) > + printf("WARNING, port %u is on remote NUMA node to " > + "polling thread.\n\tPerformance will " > + "not be optimal.\n", port); > + > + printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n", > + rte_lcore_id()); > + for (;;) { > + for (port = 0; port < nb_ports; port++) { > + struct rte_mbuf *bufs[BURST_SIZE]; > + const uint16_t nb_rx = rte_eth_rx_burst(port, 0, > + bufs, BURST_SIZE); > + if (unlikely(nb_rx == 0)) > + continue; > + const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0, > + bufs, nb_rx); > + if (unlikely(nb_tx < nb_rx)) { > + uint16_t buf; > + for (buf = nb_tx; buf < nb_rx; buf++) > + rte_pktmbuf_free(bufs[buf]); > + } > + } > + } > +} > + > +/* Main function, does initialisation and calls the per-lcore functions */ > +int > +MAIN(int argc, char *argv[]) > +{ > + struct rte_mempool *mbuf_pool; > + unsigned nb_ports; > + uint8_t portid; > + > + /* init EAL */ > + int ret = rte_eal_init(argc, argv); > + if (ret < 0) > + rte_exit(EXIT_FAILURE, "Error with EAL initialization\n"); > + argc -= ret; > + argv += ret; > + > + if (rte_eal_pci_probe() != 0) > + rte_exit(EXIT_FAILURE, "Error with PCI probing\n"); > + > + nb_ports = rte_eth_dev_count(); > + if (nb_ports < 2 || (nb_ports & 1)) > + rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n"); > + > + mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports, > + MBUF_SIZE, MBUF_CACHE_SIZE, > + sizeof(struct rte_pktmbuf_pool_private), > + rte_pktmbuf_pool_init, NULL, > + rte_pktmbuf_init, NULL, > + rte_socket_id(), 0); > + if (mbuf_pool == NULL) > + rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n"); > + > + /* initialize all ports */ > + for (portid = 0; portid < nb_ports; portid++) > + if (port_init(portid, mbuf_pool) != 0) > + rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8"\n", > + portid); > + > + if (rte_lcore_count() > 1) > + printf("\nWARNING: Coremask too big - App uses only 1 lcore\n"); > + > + /* call lcore_main on master core only */ > + lcore_main(); > + return 0; > +} > diff --git a/examples/skeleton_app/basicfwd.h b/examples/skeleton_app/basicfwd.h > new file mode 100644 > index 0000000..2682d15 > --- /dev/null > +++ b/examples/skeleton_app/basicfwd.h > @@ -0,0 +1,46 @@ > +/*- > + * BSD LICENSE > + * > + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. > + * All rights reserved. > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions > + * are met: > + * > + * * Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * * Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in > + * the documentation and/or other materials provided with the > + * distribution. > + * * Neither the name of Intel Corporation nor the names of its > + * contributors may be used to endorse or promote products derived > + * from this software without specific prior written permission. > + * > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS > + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT > + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR > + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT > + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, > + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT > + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, > + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY > + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE > + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + */ > + > +#ifndef _MAIN_H_ > +#define _MAIN_H_ > + > + > +#ifdef RTE_EXEC_ENV_BAREMETAL > +#define MAIN _main > +#else > +#define MAIN main > +#endif > + > +int MAIN(int argc, char *argv[]); > + > +#endif /* ifndef _MAIN_H_ */ > -- > 1.9.3 > >
> +#ifdef RTE_EXEC_ENV_BAREMETAL
>>+#define MAIN _main
>>+#else
>>+#define MAIN main
>>+#endif
>>+
>>+int MAIN(int argc, char *argv[]);
>>+
>>+#endif /* ifndef_MAIN_H_ */
why keeping the baremetal? It was dropped for a while.
Best regards,
Vincent
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Vincent JARDIN
> Sent: Thursday, June 26, 2014 1:57 PM
> To: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] skeleton app: Very simple code for l2fwding
>
> > +#ifdef RTE_EXEC_ENV_BAREMETAL
> >>+#define MAIN _main
> >>+#else
> >>+#define MAIN main
> >>+#endif
> >>+
> >>+int MAIN(int argc, char *argv[]);
> >>+
> >>+#endif /* ifndef_MAIN_H_ */
>
> why keeping the baremetal? It was dropped for a while.
>
Inertia :-)
Almost every other app does it this way so I kept the same styling. A separate cleanup commit would be to get rid of all this stuff.
Hi Bruce,
2014-06-26 21:22, Bruce Richardson:
> This is a very simple example app for doing packet forwarding with the
> Intel DPDK. It's designed to serve as a start point for people new to
> the Intel DPDK and who want to develop a new app.
>
> Therefore it's meant to:
> * have as good a performance out-of-the-box as possible, using the
> best-known settings for configuring the PMDs, so that any new apps can
> be based off it.
> * be kept as short as possible to make it easy to understand it and get
> started with it.
>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
What about a rebase of this patch now that Rx/Tx default conf is
available in API?
--
Thomas
On Thu, Nov 13, 2014 at 01:20:46PM +0100, Thomas Monjalon wrote:
> Hi Bruce,
>
> 2014-06-26 21:22, Bruce Richardson:
> > This is a very simple example app for doing packet forwarding with the
> > Intel DPDK. It's designed to serve as a start point for people new to
> > the Intel DPDK and who want to develop a new app.
> >
> > Therefore it's meant to:
> > * have as good a performance out-of-the-box as possible, using the
> > best-known settings for configuring the PMDs, so that any new apps can
> > be based off it.
> > * be kept as short as possible to make it easy to understand it and get
> > started with it.
> >
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
>
> What about a rebase of this patch now that Rx/Tx default conf is
> available in API?
>
Yes, I've did some work on doing so, just need to finish it up and I can resubmit
it soon, I hope.
/Bruce
This is a very simple example app for doing packet forwarding with the Intel DPDK. It's designed to serve as a start point for people new to the Intel DPDK and who want to develop a new app. Therefore it's meant to: * have as good a performance out-of-the-box as possible, using the best-known settings for configuring the PMDs, so that any new apps can be based off it. * be kept as short as possible to make it easy to understand it and get started with it. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- examples/skeleton_app/Makefile | 57 ++++++++++++ examples/skeleton_app/basicfwd.c | 183 +++++++++++++++++++++++++++++++++++++++ examples/skeleton_app/basicfwd.h | 46 ++++++++++ 3 files changed, 286 insertions(+) create mode 100644 examples/skeleton_app/Makefile create mode 100644 examples/skeleton_app/basicfwd.c create mode 100644 examples/skeleton_app/basicfwd.h diff --git a/examples/skeleton_app/Makefile b/examples/skeleton_app/Makefile new file mode 100644 index 0000000..244f4ef --- /dev/null +++ b/examples/skeleton_app/Makefile @@ -0,0 +1,57 @@ +# BSD LICENSE +# +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +ifeq ($(RTE_SDK),) +$(error "Please define RTE_SDK environment variable") +endif + +# Default target, can be overriden by command line or environment +RTE_TARGET ?= x86_64-default-linuxapp-gcc + +include $(RTE_SDK)/mk/rte.vars.mk + +# binary name +APP = basicfwd + +# all source are stored in SRCS-y +SRCS-y := basicfwd.c + +CFLAGS += $(WERROR_FLAGS) + +# workaround for a gcc bug with noreturn attribute +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) +CFLAGS_main.o += -Wno-return-type +endif + +EXTRA_CFLAGS += -O3 -g -Wfatal-errors + +include $(RTE_SDK)/mk/rte.extapp.mk diff --git a/examples/skeleton_app/basicfwd.c b/examples/skeleton_app/basicfwd.c new file mode 100644 index 0000000..f3b3fe4 --- /dev/null +++ b/examples/skeleton_app/basicfwd.c @@ -0,0 +1,183 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <stdint.h> +#include <inttypes.h> +#include <rte_eal.h> +#include <rte_ethdev.h> +#include <rte_cycles.h> +#include <rte_lcore.h> +#include <rte_mbuf.h> +#include "basicfwd.h" + +#define RX_RING_SIZE 128 +#define TX_RING_SIZE 512 + +#define NUM_MBUFS 8191 +#define MBUF_SIZE (1600 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM) +#define MBUF_CACHE_SIZE 250 +#define BURST_SIZE 32 + +static const struct rte_eth_conf port_conf_default = { + .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN, }, +}; + +/* + * Initialises a given port using global settings and with the rx buffers + * coming from the mbuf_pool passed as parameter + */ +static inline int +port_init(uint8_t port, struct rte_mempool *mbuf_pool) +{ + struct rte_eth_conf port_conf = port_conf_default; + const uint16_t rxRings = 1, txRings = 1; + int retval; + uint16_t q; + + if (port >= rte_eth_dev_count()) + return -1; + + retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf); + if (retval != 0) + return retval; + + for (q = 0; q < rxRings; q++) { + retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE, + rte_eth_dev_socket_id(port), NULL, mbuf_pool); + if (retval < 0) + return retval; + } + + for (q = 0; q < txRings; q++) { + retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE, + rte_eth_dev_socket_id(port), NULL); + if (retval < 0) + return retval; + } + + retval = rte_eth_dev_start(port); + if (retval < 0) + return retval; + + struct ether_addr addr; + rte_eth_macaddr_get(port, &addr); + printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8 + " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n", + (unsigned)port, + addr.addr_bytes[0], addr.addr_bytes[1], + addr.addr_bytes[2], addr.addr_bytes[3], + addr.addr_bytes[4], addr.addr_bytes[5]); + + rte_eth_promiscuous_enable(port); + + return 0; +} + +/* + * Main thread that does the work, reading from INPUT_PORT + * and writing to OUTPUT_PORT + */ +static __attribute__((noreturn)) void +lcore_main(void) +{ + const uint8_t nb_ports = rte_eth_dev_count(); + uint8_t port; + for (port = 0; port < nb_ports; port++) + if (rte_eth_dev_socket_id(port) > 0 && + rte_eth_dev_socket_id(port) != + (int)rte_socket_id()) + printf("WARNING, port %u is on remote NUMA node to " + "polling thread.\n\tPerformance will " + "not be optimal.\n", port); + + printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n", + rte_lcore_id()); + for (;;) { + for (port = 0; port < nb_ports; port++) { + struct rte_mbuf *bufs[BURST_SIZE]; + const uint16_t nb_rx = rte_eth_rx_burst(port, 0, + bufs, BURST_SIZE); + if (unlikely(nb_rx == 0)) + continue; + const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0, + bufs, nb_rx); + if (unlikely(nb_tx < nb_rx)) { + uint16_t buf; + for (buf = nb_tx; buf < nb_rx; buf++) + rte_pktmbuf_free(bufs[buf]); + } + } + } +} + +/* Main function, does initialisation and calls the per-lcore functions */ +int +MAIN(int argc, char *argv[]) +{ + struct rte_mempool *mbuf_pool; + unsigned nb_ports; + uint8_t portid; + + /* init EAL */ + int ret = rte_eal_init(argc, argv); + if (ret < 0) + rte_exit(EXIT_FAILURE, "Error with EAL initialization\n"); + argc -= ret; + argv += ret; + + nb_ports = rte_eth_dev_count(); + if (nb_ports < 2 || (nb_ports & 1)) + rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n"); + + mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports, + MBUF_SIZE, MBUF_CACHE_SIZE, + sizeof(struct rte_pktmbuf_pool_private), + rte_pktmbuf_pool_init, NULL, + rte_pktmbuf_init, NULL, + rte_socket_id(), 0); + if (mbuf_pool == NULL) + rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n"); + + /* initialize all ports */ + for (portid = 0; portid < nb_ports; portid++) + if (port_init(portid, mbuf_pool) != 0) + rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8"\n", + portid); + + if (rte_lcore_count() > 1) + printf("\nWARNING: Coremask too big - App uses only 1 lcore\n"); + + /* call lcore_main on master core only */ + lcore_main(); + return 0; +} diff --git a/examples/skeleton_app/basicfwd.h b/examples/skeleton_app/basicfwd.h new file mode 100644 index 0000000..2682d15 --- /dev/null +++ b/examples/skeleton_app/basicfwd.h @@ -0,0 +1,46 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _MAIN_H_ +#define _MAIN_H_ + + +#ifdef RTE_EXEC_ENV_BAREMETAL +#define MAIN _main +#else +#define MAIN main +#endif + +int MAIN(int argc, char *argv[]); + +#endif /* ifndef _MAIN_H_ */ -- 1.9.3
From: Bruce Richardson <bruce.richardson@intel.com> This is a very simple example app for doing packet forwarding with the Intel DPDK. It's designed to serve as a start point for people new to the Intel DPDK and who want to develop a new app. Therefore it's meant to: * have as good a performance out-of-the-box as possible, using the best-known settings for configuring the PMDs, so that any new apps can be based off it. * be kept as short as possible to make it easy to understand it and get started with it. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> --- v3 changes: - rename skeleton_app/ to skeleton/ - add in examples Makefile - fix default target to native - reword header guard - rename rxRings to rx_rings and txRings to tx_rings examples/Makefile | 1 + examples/{ => skeleton}/Makefile | 52 ++++------- examples/skeleton/basicfwd.c | 183 +++++++++++++++++++++++++++++++++++++++ examples/skeleton/basicfwd.h | 46 ++++++++++ 4 files changed, 249 insertions(+), 33 deletions(-) copy examples/{ => skeleton}/Makefile (60%) create mode 100644 examples/skeleton/basicfwd.c create mode 100644 examples/skeleton/basicfwd.h diff --git a/examples/Makefile b/examples/Makefile index 121dab4..8055297 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -61,6 +61,7 @@ DIRS-y += netmap_compat/bridge DIRS-$(CONFIG_RTE_LIBRTE_METER) += qos_meter DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += qos_sched DIRS-y += quota_watermark +DIRS-y += skeleton DIRS-y += timer DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += vhost DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen diff --git a/examples/Makefile b/examples/skeleton/Makefile similarity index 60% copy from examples/Makefile copy to examples/skeleton/Makefile index 121dab4..4a5d99f 100644 --- a/examples/Makefile +++ b/examples/skeleton/Makefile @@ -1,6 +1,7 @@ # BSD LICENSE # -# Copyright(c) 2014 6WIND S.A. +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved. +# All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions @@ -12,7 +13,7 @@ # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. -# * Neither the name of 6WIND S.A. nor the names of its +# * Neither the name of Intel Corporation nor the names of its # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # @@ -32,40 +33,25 @@ ifeq ($(RTE_SDK),) $(error "Please define RTE_SDK environment variable") endif -# Default target, can be overriden by command line or environment +# Default target, can be overridden by command line or environment RTE_TARGET ?= x86_64-native-linuxapp-gcc include $(RTE_SDK)/mk/rte.vars.mk -DIRS-y += cmdline -ifneq ($(ICP_ROOT),) -DIRS-y += dpdk_qat +# binary name +APP = basicfwd + +# all source are stored in SRCS-y +SRCS-y := basicfwd.c + +CFLAGS += $(WERROR_FLAGS) + +# workaround for a gcc bug with noreturn attribute +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) +CFLAGS_main.o += -Wno-return-type endif -DIRS-y += exception_path -DIRS-y += helloworld -DIRS-y += ip_pipeline -DIRS-y += ip_reassembly -DIRS-$(CONFIG_RTE_MBUF_REFCNT) += ip_fragmentation -DIRS-$(CONFIG_RTE_MBUF_REFCNT) += ipv4_multicast -DIRS-$(CONFIG_RTE_LIBRTE_KNI) += kni -DIRS-y += l2fwd -DIRS-$(CONFIG_RTE_LIBRTE_IVSHMEM) += l2fwd-ivshmem -DIRS-y += l3fwd -DIRS-$(CONFIG_RTE_LIBRTE_ACL) += l3fwd-acl -DIRS-$(CONFIG_RTE_LIBRTE_POWER) += l3fwd-power -DIRS-y += l3fwd-vf -DIRS-y += link_status_interrupt -DIRS-y += load_balancer -DIRS-y += multi_process -DIRS-y += netmap_compat/bridge -DIRS-$(CONFIG_RTE_LIBRTE_METER) += qos_meter -DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += qos_sched -DIRS-y += quota_watermark -DIRS-y += timer -DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += vhost -DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen -DIRS-y += vmdq -DIRS-y += vmdq_dcb -DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor -include $(RTE_SDK)/mk/rte.extsubdir.mk +EXTRA_CFLAGS += -O3 -g -Wfatal-errors + +include $(RTE_SDK)/mk/rte.extapp.mk diff --git a/examples/skeleton/basicfwd.c b/examples/skeleton/basicfwd.c new file mode 100644 index 0000000..ef8f90c --- /dev/null +++ b/examples/skeleton/basicfwd.c @@ -0,0 +1,183 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <stdint.h> +#include <inttypes.h> +#include <rte_eal.h> +#include <rte_ethdev.h> +#include <rte_cycles.h> +#include <rte_lcore.h> +#include <rte_mbuf.h> +#include "basicfwd.h" + +#define RX_RING_SIZE 128 +#define TX_RING_SIZE 512 + +#define NUM_MBUFS 8191 +#define MBUF_SIZE (1600 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM) +#define MBUF_CACHE_SIZE 250 +#define BURST_SIZE 32 + +static const struct rte_eth_conf port_conf_default = { + .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN, }, +}; + +/* + * Initialises a given port using global settings and with the rx buffers + * coming from the mbuf_pool passed as parameter + */ +static inline int +port_init(uint8_t port, struct rte_mempool *mbuf_pool) +{ + struct rte_eth_conf port_conf = port_conf_default; + const uint16_t rx_rings = 1, tx_rings = 1; + int retval; + uint16_t q; + + if (port >= rte_eth_dev_count()) + return -1; + + retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf); + if (retval != 0) + return retval; + + for (q = 0; q < rx_rings; q++) { + retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE, + rte_eth_dev_socket_id(port), NULL, mbuf_pool); + if (retval < 0) + return retval; + } + + for (q = 0; q < tx_rings; q++) { + retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE, + rte_eth_dev_socket_id(port), NULL); + if (retval < 0) + return retval; + } + + retval = rte_eth_dev_start(port); + if (retval < 0) + return retval; + + struct ether_addr addr; + rte_eth_macaddr_get(port, &addr); + printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8 + " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n", + (unsigned)port, + addr.addr_bytes[0], addr.addr_bytes[1], + addr.addr_bytes[2], addr.addr_bytes[3], + addr.addr_bytes[4], addr.addr_bytes[5]); + + rte_eth_promiscuous_enable(port); + + return 0; +} + +/* + * Main thread that does the work, reading from INPUT_PORT + * and writing to OUTPUT_PORT + */ +static __attribute__((noreturn)) void +lcore_main(void) +{ + const uint8_t nb_ports = rte_eth_dev_count(); + uint8_t port; + for (port = 0; port < nb_ports; port++) + if (rte_eth_dev_socket_id(port) > 0 && + rte_eth_dev_socket_id(port) != + (int)rte_socket_id()) + printf("WARNING, port %u is on remote NUMA node to " + "polling thread.\n\tPerformance will " + "not be optimal.\n", port); + + printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n", + rte_lcore_id()); + for (;;) { + for (port = 0; port < nb_ports; port++) { + struct rte_mbuf *bufs[BURST_SIZE]; + const uint16_t nb_rx = rte_eth_rx_burst(port, 0, + bufs, BURST_SIZE); + if (unlikely(nb_rx == 0)) + continue; + const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0, + bufs, nb_rx); + if (unlikely(nb_tx < nb_rx)) { + uint16_t buf; + for (buf = nb_tx; buf < nb_rx; buf++) + rte_pktmbuf_free(bufs[buf]); + } + } + } +} + +/* Main function, does initialisation and calls the per-lcore functions */ +int +MAIN(int argc, char *argv[]) +{ + struct rte_mempool *mbuf_pool; + unsigned nb_ports; + uint8_t portid; + + /* init EAL */ + int ret = rte_eal_init(argc, argv); + if (ret < 0) + rte_exit(EXIT_FAILURE, "Error with EAL initialization\n"); + argc -= ret; + argv += ret; + + nb_ports = rte_eth_dev_count(); + if (nb_ports < 2 || (nb_ports & 1)) + rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n"); + + mbuf_pool = rte_mempool_create("MBUF_POOL", NUM_MBUFS * nb_ports, + MBUF_SIZE, MBUF_CACHE_SIZE, + sizeof(struct rte_pktmbuf_pool_private), + rte_pktmbuf_pool_init, NULL, + rte_pktmbuf_init, NULL, + rte_socket_id(), 0); + if (mbuf_pool == NULL) + rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n"); + + /* initialize all ports */ + for (portid = 0; portid < nb_ports; portid++) + if (port_init(portid, mbuf_pool) != 0) + rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8"\n", + portid); + + if (rte_lcore_count() > 1) + printf("\nWARNING: Too much enabled lcores - App uses only 1 lcore\n"); + + /* call lcore_main on master core only */ + lcore_main(); + return 0; +} diff --git a/examples/skeleton/basicfwd.h b/examples/skeleton/basicfwd.h new file mode 100644 index 0000000..3797b5d --- /dev/null +++ b/examples/skeleton/basicfwd.h @@ -0,0 +1,46 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef BASICFWD_H +#define BASICFWD_H + + +#ifdef RTE_EXEC_ENV_BAREMETAL +#define MAIN _main +#else +#define MAIN main +#endif + +int MAIN(int argc, char *argv[]); + +#endif /* BASICFWD_H */ -- 2.1.3
Bruce,
I made some minor changes to the skeleton app.
Could you confirm it's ok for you?
2014-11-26 15:38, Thomas Monjalon:
> v3 changes:
> - rename skeleton_app/ to skeleton/
> - add in examples Makefile
> - fix default target to native
> - reword header guard
> - rename rxRings to rx_rings and txRings to tx_rings
On Wed, Nov 26, 2014 at 04:42:06PM +0100, Thomas Monjalon wrote: > Bruce, > > I made some minor changes to the skeleton app. > Could you confirm it's ok for you? Yes, they are fine for me, though the makefile diff looks messed up compared to the original version. Any way to force git to recognise it as a completely new file and not a copy of the higher level examples makefile? /Bruce > > 2014-11-26 15:38, Thomas Monjalon: > > v3 changes: > > - rename skeleton_app/ to skeleton/ > > - add in examples Makefile > > - fix default target to native > > - reword header guard > > - rename rxRings to rx_rings and txRings to tx_rings >
2014-11-26 15:49, Bruce Richardson:
> On Wed, Nov 26, 2014 at 04:42:06PM +0100, Thomas Monjalon wrote:
> > Bruce,
> >
> > I made some minor changes to the skeleton app.
> > Could you confirm it's ok for you?
>
> Yes, they are fine for me, though the makefile diff looks messed up compared to
> the original version. Any way to force git to recognise it as a completely new
> file and not a copy of the higher level examples makefile?
Yes, the default is to recognise similarity with at least 50%.
The option -M80% raises the threshold to 80%.
I don't know how to put this configuration in gitconfig.
--
Thomas
> This is a very simple example app for doing packet forwarding with the
> Intel DPDK. It's designed to serve as a start point for people new to
> the Intel DPDK and who want to develop a new app.
>
> Therefore it's meant to:
> * have as good a performance out-of-the-box as possible, using the
> best-known settings for configuring the PMDs, so that any new apps can
> be based off it.
> * be kept as short as possible to make it easy to understand it and get
> started with it.
>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Applied
I think we should add some references to this example in the documentation.
It will really help newcomers.
Thanks
--
Thomas