From: Bernard Iremonger <bernard.iremonger@intel.com>
To: dev@dpdk.org
Cc: john.mcnamara@intel.com, wenzhuo.lu@intel.com,
beilei.xing@intel.com, yulong.pei@intel.com,
Bernard Iremonger <bernard.iremonger@intel.com>
Subject: [dpdk-dev] [PATCH] doc: revise sample testpmd flow commands
Date: Tue, 18 Apr 2017 15:20:46 +0100 [thread overview]
Message-ID: <1492525246-2776-1-git-send-email-bernard.iremonger@intel.com> (raw)
Stop port before enabling QinQ.
Add commands to set inner and outer TPID's and start port.
Remove TPID's from flow validate and and flow create commands.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 33 ++++++++++++++++++-----------
1 file changed, 21 insertions(+), 12 deletions(-)
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index ddd1d9257..bc949b755 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2834,16 +2834,29 @@ Output can be limited to specific groups::
Sample QinQ flow rules
~~~~~~~~~~~~~~~~~~~~~~
+Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
+
+ testpmd> port stop 0
+ testpmd> vlan set qinq on 0
+
+The above command sets the inner and outer TPID's to 0x8100.
+
+To change the TPID's the following commands should be used::
+
+ testpmd> vlan set outer tpid 0xa100 0
+ testpmd> vlan set inner tpid 0x9100 0
+ testpmd> port start 0
+
Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
::
- testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
- vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 123 /
+ vlan tci is 456 / end actions vf id 1 / queue index 0 / end
Flow rule #0 validated
- testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 4 /
- vlan tpid is 0x8100 tci is 5 / end actions vf id 1 / queue index 0 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 4 /
+ vlan tci is 456 / end actions vf id 123 / queue index 0 / end
Flow rule #0 created
testpmd> flow list 0
@@ -2854,12 +2867,12 @@ Validate and create a QinQ rule on port 0 to steer traffic to a queue on the hos
::
- testpmd> flow validate 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
- vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 0 / end
+ testpmd> flow validate 0 ingress pattern eth / vlan tci is 321 /
+ vlan tci is 654 / end actions pf / queue index 0 / end
Flow rule #1 validated
- testpmd> flow create 0 ingress pattern eth / vlan tpid is 0x8100 tci is 6 /
- vlan tpid is 0x8100 tci is 7 / end actions pf / queue index 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 321 /
+ vlan tci is 654 / end actions pf / queue index 1 / end
Flow rule #1 created
testpmd> flow list 0
@@ -2867,7 +2880,3 @@ Validate and create a QinQ rule on port 0 to steer traffic to a queue on the hos
0 0 0 i- ETH VLAN VLAN=>VF QUEUE
1 0 0 i- ETH VLAN VLAN=>PF QUEUE
-After creating QinQ rule(s) the following command should be issued to enable QinQ::
-
- testpmd> vlan set qinq on 0
-
--
2.11.0
next reply other threads:[~2017-04-18 14:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-18 14:20 Bernard Iremonger [this message]
2017-04-26 15:04 ` Mcnamara, John
2017-05-01 20:39 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492525246-2776-1-git-send-email-bernard.iremonger@intel.com \
--to=bernard.iremonger@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=john.mcnamara@intel.com \
--cc=wenzhuo.lu@intel.com \
--cc=yulong.pei@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).