From: <akhil.goyal@nxp.com>
To: <dev@dpdk.org>
Cc: <declan.doherty@intel.com>, <john.mcnamara@intel.com>,
<hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [PATCH v8 02/13] crypto/dpaa2_sec: add dpaa2 sec poll mode driver
Date: Wed, 19 Apr 2017 21:07:37 +0530 [thread overview]
Message-ID: <1492616268-6307-3-git-send-email-akhil.goyal@nxp.com> (raw)
In-Reply-To: <1492616268-6307-1-git-send-email-akhil.goyal@nxp.com>
From: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
---
config/common_base | 8 +
config/defconfig_arm64-dpaa2-linuxapp-gcc | 12 ++
drivers/Makefile | 1 +
drivers/crypto/Makefile | 2 +
drivers/crypto/dpaa2_sec/Makefile | 76 +++++++
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 194 ++++++++++++++++++
drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h | 70 +++++++
drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h | 225 +++++++++++++++++++++
.../crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map | 4 +
mk/rte.app.mk | 5 +
10 files changed, 597 insertions(+)
create mode 100644 drivers/crypto/dpaa2_sec/Makefile
create mode 100644 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
create mode 100644 drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h
create mode 100644 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
create mode 100644 drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map
diff --git a/config/common_base b/config/common_base
index c177201..54d99cc 100644
--- a/config/common_base
+++ b/config/common_base
@@ -514,6 +514,14 @@ CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF_DEBUG=n
#
+#Compile NXP DPAA2 crypto sec driver for CAAM HW
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
+
+#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
index 174c0ed..afe777e 100644
--- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
+++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
@@ -65,3 +65,15 @@ CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
+
+#Compile NXP DPAA2 crypto sec driver for CAAM HW
+CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=y
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
+
+#
+# Number of sessions to create in the session memory pool
+# on a single DPAA2 SEC device.
+#
+CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
diff --git a/drivers/Makefile b/drivers/Makefile
index a7d0fc5..a04a01f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -37,6 +37,7 @@ DEPDIRS-mempool := bus
DIRS-y += net
DEPDIRS-net := bus mempool
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += crypto
+DEPDIRS-crypto := mempool
DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += event
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 652c554..7a719b9 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -53,5 +53,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += zuc
DEPDIRS-zuc = $(core-libs)
DIRS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += null
DEPDIRS-null = $(core-libs)
+DIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += dpaa2_sec
+DEPDIRS-dpaa2_sec = $(core-libs)
include $(RTE_SDK)/mk/rte.subdir.mk
diff --git a/drivers/crypto/dpaa2_sec/Makefile b/drivers/crypto/dpaa2_sec/Makefile
new file mode 100644
index 0000000..b9c808e
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/Makefile
@@ -0,0 +1,76 @@
+# BSD LICENSE
+#
+# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+# Copyright (c) 2016 NXP. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Freescale Semiconductor, Inc nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_dpaa2_sec.a
+
+# build flags
+ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y)
+CFLAGS += -O0 -g
+CFLAGS += "-Wno-error"
+else
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+endif
+CFLAGS += -D _GNU_SOURCE
+
+CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec/
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/portal
+CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2/
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+
+# versioning export map
+EXPORT_MAP := rte_pmd_dpaa2_sec_version.map
+
+# library version
+LIBABIVER := 1
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += dpaa2_sec_dpseci.c
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += lib/librte_mempool lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += lib/librte_cryptodev
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += drivers/bus/fslmc
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += drivers/mempool/dpaa2
+
+LDLIBS += -lrte_bus_fslmc
+LDLIBS += -lrte_mempool_dpaa2
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
new file mode 100644
index 0000000..378df4a
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -0,0 +1,194 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <time.h>
+#include <net/if.h>
+
+#include <rte_mbuf.h>
+#include <rte_cryptodev.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+#include <rte_string_fns.h>
+#include <rte_cycles.h>
+#include <rte_kvargs.h>
+#include <rte_dev.h>
+#include <rte_cryptodev_pmd.h>
+#include <rte_common.h>
+#include <rte_fslmc.h>
+#include <fslmc_vfio.h>
+#include <dpaa2_hw_pvt.h>
+#include <dpaa2_hw_dpio.h>
+
+#include "dpaa2_sec_priv.h"
+#include "dpaa2_sec_logs.h"
+
+#define FSL_VENDOR_ID 0x1957
+#define FSL_DEVICE_ID 0x410
+#define FSL_SUBSYSTEM_SEC 1
+#define FSL_MC_DPSECI_DEVID 3
+
+static int
+dpaa2_sec_uninit(__attribute__((unused))
+ const struct rte_cryptodev_driver *crypto_drv,
+ struct rte_cryptodev *dev)
+{
+ if (dev->data->name == NULL)
+ return -EINVAL;
+
+ PMD_INIT_LOG(INFO, "Closing DPAA2_SEC device %s on numa socket %u\n",
+ dev->data->name, rte_socket_id());
+
+ return 0;
+}
+
+static int
+dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
+{
+ struct dpaa2_sec_dev_private *internals;
+ struct rte_device *dev = cryptodev->device;
+ struct rte_dpaa2_device *dpaa2_dev;
+
+ PMD_INIT_FUNC_TRACE();
+ dpaa2_dev = container_of(dev, struct rte_dpaa2_device, device);
+ if (dpaa2_dev == NULL) {
+ PMD_INIT_LOG(ERR, "dpaa2_device not found\n");
+ return -1;
+ }
+
+ cryptodev->dev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD;
+
+ cryptodev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_HW_ACCELERATED |
+ RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING;
+
+ internals = cryptodev->data->dev_private;
+ internals->max_nb_sessions = RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS;
+
+ /*
+ * For secondary processes, we don't initialise any further as primary
+ * has already done this work. Only check we don't need a different
+ * RX function
+ */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+ PMD_INIT_LOG(DEBUG, "Device already init by primary process");
+ return 0;
+ }
+
+ PMD_INIT_LOG(DEBUG, "driver %s: created\n", cryptodev->data->name);
+ return 0;
+}
+
+static int
+cryptodev_dpaa2_sec_probe(struct rte_dpaa2_driver *dpaa2_drv,
+ struct rte_dpaa2_device *dpaa2_dev)
+{
+ struct rte_cryptodev *cryptodev;
+ char cryptodev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+
+ int retval;
+
+ sprintf(cryptodev_name, "dpsec-%d", dpaa2_dev->object_id);
+
+ cryptodev = rte_cryptodev_pmd_allocate(cryptodev_name, rte_socket_id());
+ if (cryptodev == NULL)
+ return -ENOMEM;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ cryptodev->data->dev_private = rte_zmalloc_socket(
+ "cryptodev private structure",
+ sizeof(struct dpaa2_sec_dev_private),
+ RTE_CACHE_LINE_SIZE,
+ rte_socket_id());
+
+ if (cryptodev->data->dev_private == NULL)
+ rte_panic("Cannot allocate memzone for private "
+ "device data");
+ }
+
+ dpaa2_dev->cryptodev = cryptodev;
+ cryptodev->device = &dpaa2_dev->device;
+ cryptodev->driver = (struct rte_cryptodev_driver *)dpaa2_drv;
+
+ /* init user callbacks */
+ TAILQ_INIT(&(cryptodev->link_intr_cbs));
+
+ /* Invoke PMD device initialization function */
+ retval = dpaa2_sec_dev_init(cryptodev);
+ if (retval == 0)
+ return 0;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(cryptodev->data->dev_private);
+
+ cryptodev->attached = RTE_CRYPTODEV_DETACHED;
+
+ return -ENXIO;
+}
+
+static int
+cryptodev_dpaa2_sec_remove(struct rte_dpaa2_device *dpaa2_dev)
+{
+ struct rte_cryptodev *cryptodev;
+ int ret;
+
+ cryptodev = dpaa2_dev->cryptodev;
+ if (cryptodev == NULL)
+ return -ENODEV;
+
+ ret = dpaa2_sec_uninit(NULL, cryptodev);
+ if (ret)
+ return ret;
+
+ /* free crypto device */
+ rte_cryptodev_pmd_release_device(cryptodev);
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(cryptodev->data->dev_private);
+
+ cryptodev->device = NULL;
+ cryptodev->driver = NULL;
+ cryptodev->data = NULL;
+
+ return 0;
+}
+
+static struct rte_dpaa2_driver rte_dpaa2_sec_driver = {
+ .drv_type = DPAA2_MC_DPSECI_DEVID,
+ .driver = {
+ .name = "DPAA2 SEC PMD"
+ },
+ .probe = cryptodev_dpaa2_sec_probe,
+ .remove = cryptodev_dpaa2_sec_remove,
+};
+
+RTE_PMD_REGISTER_DPAA2(dpaa2_sec_pmd, rte_dpaa2_sec_driver);
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h
new file mode 100644
index 0000000..03d4c70
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h
@@ -0,0 +1,70 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _DPAA2_SEC_LOGS_H_
+#define _DPAA2_SEC_LOGS_H_
+
+#define PMD_INIT_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT
+#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
+#else
+#define PMD_INIT_FUNC_TRACE() do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_RX
+#define PMD_RX_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+#else
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_TX
+#define PMD_TX_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+#else
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER
+#define PMD_DRV_LOG_RAW(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
+#else
+#define PMD_DRV_LOG_RAW(level, fmt, args...) do { } while (0)
+#endif
+
+#define PMD_DRV_LOG(level, fmt, args...) \
+ PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
+
+#endif /* _DPAA2_SEC_LOGS_H_ */
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
new file mode 100644
index 0000000..6ecfb01
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -0,0 +1,225 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_DPAA2_SEC_PMD_PRIVATE_H_
+#define _RTE_DPAA2_SEC_PMD_PRIVATE_H_
+
+/** private data structure for each DPAA2_SEC device */
+struct dpaa2_sec_dev_private {
+ void *mc_portal; /**< MC Portal for configuring this device */
+ void *hw; /**< Hardware handle for this device.Used by NADK framework */
+ int32_t hw_id; /**< An unique ID of this device instance */
+ int32_t vfio_fd; /**< File descriptor received via VFIO */
+ uint16_t token; /**< Token required by DPxxx objects */
+ unsigned int max_nb_queue_pairs;
+ /**< Max number of queue pairs supported by device */
+ unsigned int max_nb_sessions;
+ /**< Max number of sessions supported by device */
+};
+
+struct dpaa2_sec_qp {
+ struct dpaa2_queue rx_vq;
+ struct dpaa2_queue tx_vq;
+};
+
+static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 16,
+ .max = 24,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+#endif /* _RTE_DPAA2_SEC_PMD_PRIVATE_H_ */
diff --git a/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map b/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map
new file mode 100644
index 0000000..8591cc0
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map
@@ -0,0 +1,4 @@
+DPDK_17.05 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 8f8189f..ee7001c 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -158,6 +158,11 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ZUC) += -L$(LIBSSO_ZUC_PATH)/build -lsso
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -lrte_pmd_armv8
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO) += -L$(ARMV8_CRYPTO_LIB_PATH) -larmv8_crypto
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER) += -lrte_pmd_crypto_scheduler
+ifeq ($(CONFIG_RTE_LIBRTE_FSLMC_BUS),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_pmd_dpaa2_sec
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_mempool_dpaa2
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += -lrte_bus_fslmc
+endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
endif # CONFIG_RTE_LIBRTE_CRYPTODEV
ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)
--
1.9.1
next prev parent reply other threads:[~2017-04-19 15:38 UTC|newest]
Thread overview: 169+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 12:55 [dpdk-dev] [PATCH 0/8] Introducing NXP DPAA2 SEC based cryptodev PMD Akhil Goyal
2016-12-05 10:50 ` Akhil Goyal
2016-12-05 12:55 ` [dpdk-dev] [PATCH 1/8] drivers/common/dpaa2: Run time assembler for Descriptor formation Akhil Goyal
2016-12-06 20:23 ` Thomas Monjalon
2016-12-07 6:24 ` Akhil Goyal
2016-12-07 8:33 ` Thomas Monjalon
2016-12-07 11:44 ` Akhil Goyal
2016-12-07 13:13 ` Thomas Monjalon
2016-12-12 14:59 ` [dpdk-dev] [dpdk-dev, " Neil Horman
2016-12-05 12:55 ` [dpdk-dev] [PATCH 2/8] drivers/common/dpaa2: Sample descriptors for NXP DPAA2 SEC operations Akhil Goyal
2016-12-05 12:55 ` [dpdk-dev] [PATCH 3/8] doc: Adding NXP DPAA2_SEC in cryptodev Akhil Goyal
2016-12-05 16:40 ` Mcnamara, John
2016-12-05 16:42 ` Mcnamara, John
2016-12-06 7:04 ` Akhil Goyal
2016-12-05 12:55 ` [dpdk-dev] [PATCH 4/8] crypto/dpaa2_sec: Introducing dpaa2_sec based on NXP SEC HW Akhil Goyal
2016-12-05 12:55 ` [dpdk-dev] [PATCH 5/8] crypto/dpaa2_sec: debug and log support Akhil Goyal
2016-12-05 12:55 ` [dpdk-dev] [PATCH 6/8] crypto/dpaa2_sec: add sec procssing functionality Akhil Goyal
2016-12-21 12:39 ` De Lara Guarch, Pablo
2016-12-21 12:45 ` Akhil Goyal
2016-12-05 12:55 ` [dpdk-dev] [PATCH 7/8] crypto/dpaa2_sec: statistics support Akhil Goyal
2016-12-05 12:55 ` [dpdk-dev] [PATCH 8/8] app/test: add dpaa2_sec crypto test Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 00/11] Introducing NXP DPAA2 SEC based cryptodev PMD Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 01/11] librte_cryptodev: Add rte_device pointer in cryptodevice Akhil Goyal
2017-01-09 13:34 ` De Lara Guarch, Pablo
2017-01-12 12:26 ` Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 02/11] crypto/dpaa2_sec: Run time assembler for Descriptor formation Akhil Goyal
2017-01-09 13:55 ` De Lara Guarch, Pablo
2017-01-12 12:28 ` Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 03/11] crypto/dpaa2_sec/hw: Sample descriptors for NXP DPAA2 SEC operations Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 04/11] doc: Adding NXP DPAA2_SEC in cryptodev Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 05/11] lib: Add cryptodev type for DPAA2_SEC Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 06/11] crypto: Add DPAA2_SEC PMD for NXP DPAA2 platform Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 07/11] crypto/dpaa2_sec: Add DPAA2_SEC PMD into build system Akhil Goyal
2017-01-09 15:33 ` Thomas Monjalon
2017-01-12 12:35 ` Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 08/11] crypto/dpaa2_sec: Enable DPAA2_SEC PMD in the configuration Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 09/11] crypto/dpaa2_sec: statistics support Akhil Goyal
2016-12-22 20:16 ` [dpdk-dev] [PATCH v2 10/11] app/test: add dpaa2_sec crypto test Akhil Goyal
2016-12-22 20:17 ` [dpdk-dev] [PATCH v2 11/11] crypto/dpaa2_sec: Update MAINTAINERS entry for dpaa2_sec PMD Akhil Goyal
2017-01-09 13:31 ` [dpdk-dev] [PATCH v2 00/11] Introducing NXP DPAA2 SEC based cryptodev PMD De Lara Guarch, Pablo
2017-01-20 14:04 ` [dpdk-dev] [PATCH v3 00/10] Introducing NXP dpaa2_sec based cryptodev pmd akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 01/10] doc: add NXP dpaa2_sec in cryptodev akhil.goyal
2017-01-24 15:33 ` De Lara Guarch, Pablo
2017-01-31 5:48 ` Akhil Goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 02/10] cryptodev: add cryptodev type for dpaa2_sec akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 03/10] crypto/dpaa2_sec: add dpaa2_sec poll mode driver akhil.goyal
2017-01-20 12:32 ` Neil Horman
2017-01-20 13:17 ` Akhil Goyal
2017-01-20 19:31 ` Neil Horman
2017-01-24 6:34 ` Akhil Goyal
2017-01-24 15:06 ` Neil Horman
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 04/10] crypto/dpaa2_sec: add run time assembler for descriptor formation akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 05/10] crypto/dpaa2_sec: add sample descriptors for NXP dpaa2_sec operations akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 06/10] crypto/dpaa2_sec: add crypto operation support akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 07/10] crypto/dpaa2_sec: statistics support akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 08/10] crypto/dpaa2_sec: update MAINTAINERS entry for dpaa2_sec pmd akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 09/10] app/test: add dpaa2_sec crypto performance test akhil.goyal
2017-01-20 14:05 ` [dpdk-dev] [PATCH v3 10/10] app/test: add dpaa2_sec crypto functional test akhil.goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 00/12] Introducing NXP dpaa2_sec based cryptodev pmd Akhil Goyal
2017-03-03 14:25 ` Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 01/12] cryptodev: add cryptodev type for dpaa2_sec Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 01/12] cryptodev: add cryptodev type for dpaa2 sec Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 02/12] crypto/dpaa2_sec: add dpaa2_sec poll mode driver Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 02/12] crypto/dpaa2_sec: add dpaa2 sec " Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 03/12] crypto/dpaa2_sec: add mc dpseci object support Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 04/12] crypto/dpaa2_sec: add basic crypto operations Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 05/12] crypto/dpaa2_sec: add run time assembler for descriptor formation Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 06/12] crypto/dpaa2_sec: add sample descriptors for NXP dpaa2 sec ops Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 07/12] crypto/dpaa2_sec: add crypto operation support Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 08/12] crypto/dpaa2_sec: statistics support Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 09/12] doc: add NXP dpaa2_sec in cryptodev Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 09/12] doc: add NXP dpaa2 sec " Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 10/12] crypto/dpaa2_sec: update MAINTAINERS entry for dpaa2_sec pmd Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 10/12] maintainers: claim responsibility for dpaa2 sec pmd Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 11/12] app/test: add dpaa2_sec crypto performance test Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 11/12] app/test: add dpaa2 sec " Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 12/12] app/test: add dpaa2_sec crypto functional test Akhil Goyal
2017-03-03 19:36 ` [dpdk-dev] [PATCH v4 12/12] app/test: add dpaa2 sec " Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 00/12] Introducing NXP dpaa2_sec based cryptodev pmd Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 01/12] cryptodev: add cryptodev type for dpaa2 sec Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 02/12] crypto/dpaa2_sec: add dpaa2 sec poll mode driver Akhil Goyal
2017-03-21 15:07 ` De Lara Guarch, Pablo
2017-03-22 8:39 ` Akhil Goyal
2017-03-21 15:40 ` De Lara Guarch, Pablo
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 03/12] crypto/dpaa2_sec: add mc dpseci object support Akhil Goyal
2017-03-21 16:00 ` De Lara Guarch, Pablo
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 04/12] crypto/dpaa2_sec: add basic crypto operations Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 05/12] crypto/dpaa2_sec: add run time assembler for descriptor formation Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 06/12] crypto/dpaa2_sec: add sample descriptors for NXP dpaa2 sec ops Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 07/12] crypto/dpaa2_sec: add crypto operation support Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 08/12] crypto/dpaa2_sec: statistics support Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 09/12] doc: add NXP dpaa2 sec in cryptodev Akhil Goyal
2017-03-08 18:17 ` Mcnamara, John
2017-03-22 9:50 ` Akhil Goyal
2017-03-22 16:30 ` De Lara Guarch, Pablo
2017-03-22 16:34 ` Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 10/12] maintainers: claim responsibility for dpaa2 sec pmd Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 11/12] app/test: add dpaa2 sec crypto performance test Akhil Goyal
2017-03-03 19:49 ` [dpdk-dev] [PATCH v5 12/12] app/test: add dpaa2 sec crypto functional test Akhil Goyal
2017-03-21 15:31 ` De Lara Guarch, Pablo
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 00/13] Introducing NXP dpaa2_sec based cryptodev pmd akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 01/13] cryptodev: add cryptodev type for dpaa2 sec akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 02/13] crypto/dpaa2_sec: add dpaa2 sec poll mode driver akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 03/13] crypto/dpaa2_sec: add mc dpseci object support akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 04/13] crypto/dpaa2_sec: add basic crypto operations akhil.goyal
2017-03-27 13:58 ` De Lara Guarch, Pablo
2017-03-29 10:44 ` Akhil Goyal
2017-03-29 19:26 ` De Lara Guarch, Pablo
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 05/13] crypto/dpaa2_sec: add run time assembler for descriptor formation akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 06/13] crypto/dpaa2_sec: add sample descriptors for NXP dpaa2 sec ops akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 07/13] bus/fslmc: add packet frame list entry definitions akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 08/13] crypto/dpaa2_sec: add crypto operation support akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 09/13] crypto/dpaa2_sec: statistics support akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 10/13] doc: add NXP dpaa2 sec in cryptodev akhil.goyal
2017-04-03 15:53 ` Mcnamara, John
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 11/13] maintainers: claim responsibility for dpaa2 sec pmd akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 12/13] test/test: add dpaa2 sec crypto performance test akhil.goyal
2017-03-24 21:57 ` [dpdk-dev] [PATCH v6 13/13] test/test: add dpaa2 sec crypto functional test akhil.goyal
2017-04-10 12:30 ` [dpdk-dev] [PATCH v7 00/13] Introducing NXP dpaa2_sec based cryptodev pmd akhil.goyal
2017-04-10 12:30 ` [dpdk-dev] [PATCH v7 01/13] cryptodev: add cryptodev type for dpaa2 sec akhil.goyal
2017-04-10 12:30 ` [dpdk-dev] [PATCH v7 02/13] crypto/dpaa2_sec: add dpaa2 sec poll mode driver akhil.goyal
2017-04-10 12:30 ` [dpdk-dev] [PATCH v7 03/13] crypto/dpaa2_sec: add mc dpseci object support akhil.goyal
2017-04-10 12:30 ` [dpdk-dev] [PATCH v7 04/13] crypto/dpaa2_sec: add basic crypto operations akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 05/13] crypto/dpaa2_sec: add run time assembler for descriptor formation akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 06/13] crypto/dpaa2_sec: add sample descriptors for NXP dpaa2 sec ops akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 07/13] bus/fslmc: add packet frame list entry definitions akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 08/13] crypto/dpaa2_sec: add crypto operation support akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 09/13] crypto/dpaa2_sec: statistics support akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 10/13] doc: add NXP dpaa2 sec in cryptodev akhil.goyal
2017-04-14 16:11 ` Mcnamara, John
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 11/13] maintainers: claim responsibility for dpaa2 sec pmd akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 12/13] test/test: add dpaa2 sec crypto performance test akhil.goyal
2017-04-10 12:31 ` [dpdk-dev] [PATCH v7 13/13] test/test: add dpaa2 sec crypto functional test akhil.goyal
2017-04-10 12:36 ` [dpdk-dev] [PATCH v7 00/13] Introducing NXP dpaa2_sec based cryptodev pmd Akhil Goyal
2017-04-18 21:51 ` De Lara Guarch, Pablo
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 " akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 01/13] cryptodev: add cryptodev type for dpaa2 sec akhil.goyal
2017-04-19 15:37 ` akhil.goyal [this message]
2017-04-19 17:32 ` [dpdk-dev] [PATCH v8 02/13] crypto/dpaa2_sec: add dpaa2 sec poll mode driver De Lara Guarch, Pablo
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 03/13] maintainers: claim responsibility for dpaa2 sec pmd akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 04/13] test/test: add dpaa2 sec crypto performance test akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 05/13] test/test: add dpaa2 sec crypto functional test akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 06/13] crypto/dpaa2_sec: add mc dpseci object support akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 07/13] crypto/dpaa2_sec: add basic crypto operations akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 08/13] crypto/dpaa2_sec: add run time assembler for descriptor formation akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 09/13] crypto/dpaa2_sec: add sample descriptors for NXP dpaa2 sec ops akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 10/13] bus/fslmc: add packet frame list entry definitions akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 11/13] crypto/dpaa2_sec: add crypto operation support akhil.goyal
2017-04-19 17:36 ` De Lara Guarch, Pablo
2017-04-19 17:47 ` Hemant Agrawal
2017-04-19 21:29 ` De Lara Guarch, Pablo
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 12/13] crypto/dpaa2_sec: statistics support akhil.goyal
2017-04-19 15:37 ` [dpdk-dev] [PATCH v8 13/13] doc: add NXP dpaa2 sec in cryptodev akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 00/13] Introducing NXP dpaa2_sec based cryptodev pmd akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 01/13] cryptodev: add cryptodev type for dpaa2 sec akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 02/13] crypto/dpaa2_sec: add dpaa2 sec poll mode driver akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 03/13] crypto/dpaa2_sec: add mc dpseci object support akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 04/13] crypto/dpaa2_sec: add basic crypto operations akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 05/13] crypto/dpaa2_sec: add run time assembler for descriptor formation akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 06/13] crypto/dpaa2_sec: add sample descriptors for NXP dpaa2 sec ops akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 07/13] bus/fslmc: add packet frame list entry definitions akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 08/13] crypto/dpaa2_sec: add crypto operation support akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 09/13] crypto/dpaa2_sec: statistics support akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 10/13] doc: add NXP dpaa2 sec in cryptodev akhil.goyal
2017-04-20 8:10 ` De Lara Guarch, Pablo
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 11/13] maintainers: claim responsibility for dpaa2 sec pmd akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 12/13] test/test: add dpaa2 sec crypto performance test akhil.goyal
2017-04-20 5:44 ` [dpdk-dev] [PATCH v9 13/13] test/test: add dpaa2 sec crypto functional test akhil.goyal
2017-04-20 9:31 ` [dpdk-dev] [PATCH v9 00/13] Introducing NXP dpaa2_sec based cryptodev pmd De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492616268-6307-3-git-send-email-akhil.goyal@nxp.com \
--to=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=john.mcnamara@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).