From: Nipun Gupta <nipun.gupta@nxp.com>
To: <dev@dpdk.org>
Cc: <hemant.agrawal@nxp.com>, <jerin.jacob@caviumnetworks.com>,
<harry.van.haaren@intel.com>, <bruce.richardson@intel.com>,
<gage.eads@intel.com>, <shreyansh.jain@nxp.com>,
Nipun Gupta <nipun.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH 04/20] bus/fslmc: adding basic dpcon support
Date: Thu, 25 May 2017 23:37:35 +0530 [thread overview]
Message-ID: <1495735671-4917-5-git-send-email-nipun.gupta@nxp.com> (raw)
In-Reply-To: <1495735671-4917-1-git-send-email-nipun.gupta@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
drivers/bus/fslmc/Makefile | 3 +-
drivers/bus/fslmc/fslmc_vfio.h | 1 +
drivers/bus/fslmc/mc/dpcon.c | 230 +++++++++++++++++++++++++++
drivers/bus/fslmc/mc/fsl_dpcon.h | 238 ++++++++++++++++++++++++++++
drivers/bus/fslmc/mc/fsl_dpcon_cmd.h | 175 ++++++++++++++++++++
drivers/bus/fslmc/rte_bus_fslmc_version.map | 2 +
6 files changed, 648 insertions(+), 1 deletion(-)
create mode 100644 drivers/bus/fslmc/mc/dpcon.c
create mode 100644 drivers/bus/fslmc/mc/fsl_dpcon.h
create mode 100644 drivers/bus/fslmc/mc/fsl_dpcon_cmd.h
diff --git a/drivers/bus/fslmc/Makefile b/drivers/bus/fslmc/Makefile
index 973d279..7ef805b 100644
--- a/drivers/bus/fslmc/Makefile
+++ b/drivers/bus/fslmc/Makefile
@@ -65,7 +65,8 @@ SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += \
SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += \
mc/dpbp.c \
mc/dpio.c \
- mc/mc_sys.c
+ mc/mc_sys.c \
+ mc/dpcon.c \
SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += portal/dpaa2_hw_dpio.c
SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += portal/dpaa2_hw_dpbp.c
diff --git a/drivers/bus/fslmc/fslmc_vfio.h b/drivers/bus/fslmc/fslmc_vfio.h
index ffed62e..eddce31 100644
--- a/drivers/bus/fslmc/fslmc_vfio.h
+++ b/drivers/bus/fslmc/fslmc_vfio.h
@@ -39,6 +39,7 @@
#define DPAA2_VENDOR_ID 0x1957
#define DPAA2_MC_DPNI_DEVID 7
#define DPAA2_MC_DPSECI_DEVID 3
+#define DPAA2_MC_DPCON_DEVID 5
#define DPAA2_MC_DPIO_DEVID 9
#define DPAA2_MC_DPBP_DEVID 10
diff --git a/drivers/bus/fslmc/mc/dpcon.c b/drivers/bus/fslmc/mc/dpcon.c
new file mode 100644
index 0000000..b078dff
--- /dev/null
+++ b/drivers/bus/fslmc/mc/dpcon.c
@@ -0,0 +1,230 @@
+/* Copyright 2013-2016 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <fsl_mc_sys.h>
+#include <fsl_mc_cmd.h>
+#include <fsl_dpcon.h>
+#include <fsl_dpcon_cmd.h>
+
+int dpcon_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpcon_id,
+ uint16_t *token)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_OPEN,
+ cmd_flags,
+ 0);
+ DPCON_CMD_OPEN(cmd, dpcon_id);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ *token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+ return 0;
+}
+
+int dpcon_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_CLOSE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpcon_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpcon_cfg *cfg,
+ uint32_t *obj_id)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_CREATE,
+ cmd_flags,
+ dprc_token);
+ DPCON_CMD_CREATE(cmd, cfg);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ CMD_CREATE_RSP_GET_OBJ_ID_PARAM0(cmd, *obj_id);
+
+ return 0;
+}
+
+int dpcon_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_DESTROY,
+ cmd_flags,
+ dprc_token);
+ /* set object id to destroy */
+ CMD_DESTROY_SET_OBJ_ID_PARAM0(cmd, object_id);
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpcon_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_ENABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpcon_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_DISABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpcon_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_IS_ENABLED,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPCON_RSP_IS_ENABLED(cmd, *en);
+
+ return 0;
+}
+
+int dpcon_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_RESET,
+ cmd_flags, token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpcon_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpcon_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_GET_ATTR,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPCON_RSP_GET_ATTR(cmd, attr);
+
+ return 0;
+}
+
+int dpcon_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ cmd.header = mc_encode_cmd_header(DPCON_CMDID_GET_API_VERSION,
+ cmd_flags,
+ 0);
+
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ DPCON_RSP_GET_API_VERSION(cmd, *major_ver, *minor_ver);
+
+ return 0;
+}
diff --git a/drivers/bus/fslmc/mc/fsl_dpcon.h b/drivers/bus/fslmc/mc/fsl_dpcon.h
new file mode 100644
index 0000000..0ed9db5
--- /dev/null
+++ b/drivers/bus/fslmc/mc/fsl_dpcon.h
@@ -0,0 +1,238 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __FSL_DPCON_H
+#define __FSL_DPCON_H
+
+/* Data Path Concentrator API
+ * Contains initialization APIs and runtime control APIs for DPCON
+ */
+
+struct fsl_mc_io;
+
+/** General DPCON macros */
+
+/**
+ * Use it to disable notifications; see dpcon_set_notification()
+ */
+#define DPCON_INVALID_DPIO_ID (int)(-1)
+
+/**
+ * dpcon_open() - Open a control session for the specified object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @dpcon_id: DPCON unique ID
+ * @token: Returned token; use in subsequent API calls
+ *
+ * This function can be used to open a control session for an
+ * already created object; an object may have been declared in
+ * the DPL or by calling the dpcon_create() function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent commands for
+ * this specific object.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpcon_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpcon_id,
+ uint16_t *token);
+
+/**
+ * dpcon_close() - Close the control session of the object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCON object
+ *
+ * After this function is called, no further operations are
+ * allowed on the object without opening a new control session.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpcon_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * struct dpcon_cfg - Structure representing DPCON configuration
+ * @num_priorities: Number of priorities for the DPCON channel (1-8)
+ */
+struct dpcon_cfg {
+ uint8_t num_priorities;
+};
+
+/**
+ * dpcon_create() - Create the DPCON object.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @dprc_token: Parent container token; '0' for default container
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @cfg: Configuration structure
+ * @obj_id: returned object id
+ *
+ * Create the DPCON object, allocate required resources and
+ * perform required initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ *
+ * The function accepts an authentication token of a parent
+ * container that this object should be assigned to. The token
+ * can be '0' so the object will be assigned to the default container.
+ * The newly created object can be opened with the returned
+ * object id and using the container's associated tokens and MC portals.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpcon_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpcon_cfg *cfg,
+ uint32_t *obj_id);
+
+/**
+ * dpcon_destroy() - Destroy the DPCON object and release all its resources.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @dprc_token: Parent container token; '0' for default container
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @object_id: The object id; it must be a valid id within the container that
+ * created this object;
+ *
+ * The function accepts the authentication token of the parent container that
+ * created the object (not the one that currently owns the object). The object
+ * is searched within parent using the provided 'object_id'.
+ * All tokens to the object must be closed before calling destroy.
+ *
+ * Return: '0' on Success; error code otherwise.
+ */
+int dpcon_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id);
+
+/**
+ * dpcon_enable() - Enable the DPCON
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCON object
+ *
+ * Return: '0' on Success; Error code otherwise
+ */
+int dpcon_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpcon_disable() - Disable the DPCON
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCON object
+ *
+ * Return: '0' on Success; Error code otherwise
+ */
+int dpcon_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpcon_is_enabled() - Check if the DPCON is enabled.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCON object
+ * @en: Returns '1' if object is enabled; '0' otherwise
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpcon_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en);
+
+/**
+ * dpcon_reset() - Reset the DPCON, returns the object to initial state.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCON object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpcon_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * struct dpcon_attr - Structure representing DPCON attributes
+ * @id: DPCON object ID
+ * @qbman_ch_id: Channel ID to be used by dequeue operation
+ * @num_priorities: Number of priorities for the DPCON channel (1-8)
+ */
+struct dpcon_attr {
+ int id;
+ uint16_t qbman_ch_id;
+ uint8_t num_priorities;
+};
+
+/**
+ * dpcon_get_attributes() - Retrieve DPCON attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCON object
+ * @attr: Object's attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpcon_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpcon_attr *attr);
+
+/**
+ * dpcon_get_api_version() - Get Data Path Concentrator API version
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @major_ver: Major version of data path concentrator API
+ * @minor_ver: Minor version of data path concentrator API
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpcon_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver);
+
+#endif /* __FSL_DPCON_H */
diff --git a/drivers/bus/fslmc/mc/fsl_dpcon_cmd.h b/drivers/bus/fslmc/mc/fsl_dpcon_cmd.h
new file mode 100644
index 0000000..f7f7690
--- /dev/null
+++ b/drivers/bus/fslmc/mc/fsl_dpcon_cmd.h
@@ -0,0 +1,175 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_DPCON_CMD_H
+#define _FSL_DPCON_CMD_H
+
+/* DPCON Version */
+#define DPCON_VER_MAJOR 3
+#define DPCON_VER_MINOR 2
+
+/* Command IDs */
+#define DPCON_CMDID_CLOSE ((0x800 << 4) | (0x1))
+#define DPCON_CMDID_OPEN ((0x808 << 4) | (0x1))
+#define DPCON_CMDID_CREATE ((0x908 << 4) | (0x1))
+#define DPCON_CMDID_DESTROY ((0x988 << 4) | (0x1))
+#define DPCON_CMDID_GET_API_VERSION ((0xa08 << 4) | (0x1))
+
+#define DPCON_CMDID_ENABLE ((0x002 << 4) | (0x1))
+#define DPCON_CMDID_DISABLE ((0x003 << 4) | (0x1))
+#define DPCON_CMDID_GET_ATTR ((0x004 << 4) | (0x1))
+#define DPCON_CMDID_RESET ((0x005 << 4) | (0x1))
+#define DPCON_CMDID_IS_ENABLED ((0x006 << 4) | (0x1))
+
+#define DPCON_CMDID_SET_IRQ ((0x010 << 4) | (0x1))
+#define DPCON_CMDID_GET_IRQ ((0x011 << 4) | (0x1))
+#define DPCON_CMDID_SET_IRQ_ENABLE ((0x012 << 4) | (0x1))
+#define DPCON_CMDID_GET_IRQ_ENABLE ((0x013 << 4) | (0x1))
+#define DPCON_CMDID_SET_IRQ_MASK ((0x014 << 4) | (0x1))
+#define DPCON_CMDID_GET_IRQ_MASK ((0x015 << 4) | (0x1))
+#define DPCON_CMDID_GET_IRQ_STATUS ((0x016 << 4) | (0x1))
+#define DPCON_CMDID_CLEAR_IRQ_STATUS ((0x017 << 4) | (0x1))
+
+#define DPCON_CMDID_SET_NOTIFICATION ((0x100 << 4) | (0x1))
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_OPEN(cmd, dpcon_id) \
+ MC_CMD_OP(cmd, 0, 0, 32, int, dpcon_id)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_CREATE(cmd, cfg) \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->num_priorities)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_RSP_IS_ENABLED(cmd, en) \
+ MC_RSP_OP(cmd, 0, 0, 1, int, en)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\
+ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\
+ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\
+ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_GET_IRQ(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_RSP_GET_IRQ(cmd, type, irq_cfg) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val);\
+ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\
+ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \
+ MC_RSP_OP(cmd, 2, 32, 32, int, type);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_SET_IRQ_ENABLE(cmd, irq_index, en) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, en); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_GET_IRQ_ENABLE(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_RSP_GET_IRQ_ENABLE(cmd, en) \
+ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, en)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_GET_IRQ_MASK(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_RSP_GET_IRQ_MASK(cmd, mask) \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_RSP_GET_IRQ_STATUS(cmd, status) \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_RSP_GET_ATTR(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, attr->id);\
+ MC_RSP_OP(cmd, 0, 32, 16, uint16_t, attr->qbman_ch_id);\
+ MC_RSP_OP(cmd, 0, 48, 8, uint8_t, attr->num_priorities);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_CMD_SET_NOTIFICATION(cmd, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dpio_id);\
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->priority);\
+ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCON_RSP_GET_API_VERSION(cmd, major, minor) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, major);\
+ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, minor);\
+} while (0)
+
+#endif /* _FSL_DPCON_CMD_H */
diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/rte_bus_fslmc_version.map
index 4c03e67..92a7342 100644
--- a/drivers/bus/fslmc/rte_bus_fslmc_version.map
+++ b/drivers/bus/fslmc/rte_bus_fslmc_version.map
@@ -53,5 +53,7 @@ DPDK_17.05 {
DPDK_17.08 {
global:
+ dpcon_open;
+ dpcon_get_attributes;
rte_fslmc_object_register;
} DPDK_17.05;
--
1.9.1
next prev parent reply other threads:[~2017-05-25 18:08 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-25 18:07 [dpdk-dev] [PATCH 00/20] next-eventdev: NXP DPAA2 eventdev PMD Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 01/20] event/dpaa2: add basic build infrastructure Nipun Gupta
2017-05-31 14:59 ` Jerin Jacob
2017-05-25 18:07 ` [dpdk-dev] [PATCH 02/20] bus/fslmc: generic framework for mc object creation Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 03/20] bus/fslmc: integrating dpio and dpbp to object framework Nipun Gupta
2017-05-25 18:07 ` Nipun Gupta [this message]
2017-05-25 18:07 ` [dpdk-dev] [PATCH 05/20] bus/fslmc: export qbman dqrr funcs for eventdev usages Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 06/20] event/dpaa2: register dpcon as dpaa2 device for bus scan Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 07/20] bus/fslmc: adding basic dpci support Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 08/20] bus/fslmc: register dpci as dpaa2 device for bus scan Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 09/20] bus/fslmc: adding cpu support in stashing config Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 10/20] event/dpaa2: add initialization of event device Nipun Gupta
2017-05-31 15:10 ` Jerin Jacob
2017-06-01 10:25 ` Nipun Gupta
2017-06-01 10:39 ` Jerin Jacob
2017-05-25 18:07 ` [dpdk-dev] [PATCH 11/20] bus/fslmc: add support for static dequeue from portal Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 12/20] event/dpaa2: add configuration functions Nipun Gupta
2017-05-31 15:20 ` Jerin Jacob
2017-05-31 15:29 ` Jerin Jacob
2017-06-01 11:39 ` Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 13/20] bus/fslmc: support enqueue with multiple enqueue descriptors Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 14/20] bus/fslmc: add callback per queue to enable Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 15/20] bus/fslmc: change func argument to const to avoid warning Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 16/20] event/dpaa2: add enqueue and dequeue functionality Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 17/20] fslmc/bus: add interrupt enabling routine Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 18/20] bus/fslmc: enable portal interrupt handling Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 19/20] event/dpaa2: handle timeout using interrupts in dequeue Nipun Gupta
2017-05-31 15:49 ` Jerin Jacob
2017-06-01 11:42 ` Nipun Gupta
2017-05-25 18:07 ` [dpdk-dev] [PATCH 20/20] doc: add NXP DPAA2 EVENTDEV details Nipun Gupta
2017-05-31 15:58 ` Jerin Jacob
2017-06-01 12:07 ` Nipun Gupta
2017-05-31 14:50 ` [dpdk-dev] [PATCH 00/20] next-eventdev: NXP DPAA2 eventdev PMD Jerin Jacob
2017-05-31 16:17 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495735671-4917-5-git-send-email-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gage.eads@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=shreyansh.jain@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).