From: Shreyansh Jain <shreyansh.jain@nxp.com>
To: <dev@dpdk.org>
Cc: <ferruh.yigit@intel.com>, <hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [RFC Patch 38/39] net/dpaa: add support for flow control
Date: Sat, 27 May 2017 15:55:34 +0530 [thread overview]
Message-ID: <1495880735-1651-39-git-send-email-shreyansh.jain@nxp.com> (raw)
In-Reply-To: <1495880735-1651-1-git-send-email-shreyansh.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
---
doc/guides/nics/features/dpaa.ini | 1 +
drivers/net/dpaa/dpaa_ethdev.c | 112 ++++++++++++++++++++++++++++++++++++++
2 files changed, 113 insertions(+)
diff --git a/doc/guides/nics/features/dpaa.ini b/doc/guides/nics/features/dpaa.ini
index c2f787d..2d91303 100644
--- a/doc/guides/nics/features/dpaa.ini
+++ b/doc/guides/nics/features/dpaa.ini
@@ -13,6 +13,7 @@ Promiscuous mode = Y
Allmulticast mode = Y
Unicast MAC filter = Y
RSS hash = Y
+Flow control = Y
L3 checksum offload = Y
L4 checksum offload = Y
Packet type parsing = Y
diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index 8204ab7..30ebc2b 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -359,6 +359,85 @@ static int dpaa_link_up(struct rte_eth_dev *dev)
}
static int
+dpaa_flow_ctrl_set(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct dpaa_if *dpaa_intf = dev->data->dev_private;
+ struct rte_eth_fc_conf *net_fc;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (!(dpaa_intf->fc_conf)) {
+ dpaa_intf->fc_conf = rte_zmalloc(NULL,
+ sizeof(struct rte_eth_fc_conf), MAX_CACHELINE);
+ if (!dpaa_intf->fc_conf) {
+ PMD_DRV_LOG(ERR, "unable to save flow control info");
+ return -ENOMEM;
+ }
+ }
+ net_fc = dpaa_intf->fc_conf;
+
+ if (fc_conf->high_water < fc_conf->low_water) {
+ PMD_DRV_LOG(ERR, "Incorrect Flow Control Configuration");
+ return -EINVAL;
+ }
+
+ if (fc_conf->mode == RTE_FC_NONE) {
+ return 0;
+ } else if (fc_conf->mode == RTE_FC_TX_PAUSE ||
+ fc_conf->mode == RTE_FC_FULL) {
+ fman_if_set_fc_threshold(dpaa_intf->fif, fc_conf->high_water,
+ fc_conf->low_water,
+ dpaa_intf->bp_info->bpid);
+ if (fc_conf->pause_time)
+ fman_if_set_fc_quanta(dpaa_intf->fif,
+ fc_conf->pause_time);
+ }
+
+ /* Save the information in dpaa device */
+ net_fc->pause_time = fc_conf->pause_time;
+ net_fc->high_water = fc_conf->high_water;
+ net_fc->low_water = fc_conf->low_water;
+ net_fc->send_xon = fc_conf->send_xon;
+ net_fc->mac_ctrl_frame_fwd = fc_conf->mac_ctrl_frame_fwd;
+ net_fc->mode = fc_conf->mode;
+ net_fc->autoneg = fc_conf->autoneg;
+
+ return 0;
+}
+
+static int
+dpaa_flow_ctrl_get(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf)
+{
+ struct dpaa_if *dpaa_intf = dev->data->dev_private;
+ struct rte_eth_fc_conf *net_fc = dpaa_intf->fc_conf;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (net_fc) {
+ fc_conf->pause_time = net_fc->pause_time;
+ fc_conf->high_water = net_fc->high_water;
+ fc_conf->low_water = net_fc->low_water;
+ fc_conf->send_xon = net_fc->send_xon;
+ fc_conf->mac_ctrl_frame_fwd = net_fc->mac_ctrl_frame_fwd;
+ fc_conf->mode = net_fc->mode;
+ fc_conf->autoneg = net_fc->autoneg;
+ return 0;
+ }
+ ret = fman_if_get_fc_threshold(dpaa_intf->fif);
+ if (ret) {
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ fc_conf->pause_time = fman_if_get_fc_quanta(dpaa_intf->fif);
+ } else {
+ fc_conf->mode = RTE_FC_NONE;
+ }
+
+ return 0;
+}
+
+static int
dpaa_dev_add_mac_addr(struct rte_eth_dev *dev,
struct ether_addr *addr,
uint32_t index,
@@ -422,6 +501,9 @@ static struct eth_dev_ops dpaa_devops = {
.rx_queue_release = dpaa_eth_rx_queue_release,
.tx_queue_release = dpaa_eth_tx_queue_release,
+ .flow_ctrl_get = dpaa_flow_ctrl_get,
+ .flow_ctrl_set = dpaa_flow_ctrl_set,
+
.link_update = dpaa_eth_link_update,
.stats_get = dpaa_eth_stats_get,
.stats_reset = dpaa_eth_stats_reset,
@@ -438,6 +520,33 @@ static struct eth_dev_ops dpaa_devops = {
};
+static int dpaa_fc_set_default(struct dpaa_if *dpaa_intf)
+{
+ struct rte_eth_fc_conf *fc_conf;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (!(dpaa_intf->fc_conf)) {
+ dpaa_intf->fc_conf = rte_zmalloc(NULL,
+ sizeof(struct rte_eth_fc_conf), MAX_CACHELINE);
+ if (!dpaa_intf->fc_conf) {
+ PMD_DRV_LOG(ERR, "unable to save flow control info");
+ return -ENOMEM;
+ }
+ }
+ fc_conf = dpaa_intf->fc_conf;
+ ret = fman_if_get_fc_threshold(dpaa_intf->fif);
+ if (ret) {
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ fc_conf->pause_time = fman_if_get_fc_quanta(dpaa_intf->fif);
+ } else {
+ fc_conf->mode = RTE_FC_NONE;
+ }
+
+ return 0;
+}
+
/* Initialise an Rx FQ */
static int dpaa_rx_queue_init(struct qman_fq *fq,
uint32_t fqid)
@@ -575,6 +684,9 @@ static int dpaa_eth_dev_init(struct rte_eth_dev *eth_dev)
PMD_DRV_LOG(DEBUG, "all fqs created");
+ /* Get the initial configuration for flow control */
+ dpaa_fc_set_default(dpaa_intf);
+
/* reset bpool list, initialize bpool dynamically */
list_for_each_entry_safe(bp, tmp_bp, &cfg->fman_if->bpool_list, node) {
list_del(&bp->node);
--
2.7.4
next prev parent reply other threads:[~2017-05-27 10:19 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-27 10:24 [dpdk-dev] [RFC Patch 00/39] Introduce NXP DPAA Bus, Mempool and PMD Shreyansh Jain
2017-05-27 10:24 ` [dpdk-dev] [RFC Patch 01/39] eal: add Bus log type Shreyansh Jain
2017-05-27 10:28 ` Shreyansh Jain
2017-05-27 10:24 ` [dpdk-dev] [RFC Patch 02/39] eal: add support for 24 40 and 48 bit operations Shreyansh Jain
2017-05-27 10:24 ` [dpdk-dev] [RFC Patch 03/39] config: add NXP DPAA SoC build configuration Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 04/39] bus/dpaa: introduce NXP DPAA Bus driver skeleton Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 05/39] bus/dpaa: add compatibility and helper macros Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 06/39] bus/dpaa: add OF parser for device scanning Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 07/39] bus/dpaa: introducing FMan configurations Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 08/39] bus/dpaa: add FMan hardware operations Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 09/39] bus/dpaa: enable DPAA IOCTL portal driver Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 10/39] bus/dpaa: add layer for interrupt emulation using pthread Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 11/39] bus/dpaa: add routines for managing a RB tree Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 12/39] bus/dpaa: add QMAN interface driver Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 13/39] bus/dpaa: add QMan driver core routines Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 14/39] bus/dpaa: add BMAN driver core Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 15/39] bus/dpaa: add support for FMAN frame queue lookup Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 16/39] bus/dpaa: add BMan hardware interfaces Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 17/39] bus/dpaa: add fman flow control threshold setting Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 18/39] bus/dpaa: integrate DPAA Bus with hardware blocks Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 19/39] doc: add NXP DPAA PMD documentation Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 20/39] mempool/dpaa: add support for NXP DPAA Mempool Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 21/39] drivers: enable compilation of DPAA Mempool driver Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 22/39] maintainers: claim ownership " Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 23/39] net/dpaa: add NXP DPAA PMD driver skeleton Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 24/39] config: enable NXP DPAA PMD compilation Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 25/39] net/dpaa: add support for Tx and Rx queue setup Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 26/39] net/dpaa: add support for MTU update Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 27/39] net/dpaa: add support for link status update Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 28/39] net/dpaa: add support for jumbo frames Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 29/39] net/dpaa: add support for promiscuous toggle Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 30/39] net/dpaa: add support for multicast toggle Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 31/39] net/dpaa: add support for basic stats Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 32/39] net/dpaa: add support for device info Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 33/39] net/dpaa: support for checksum offload Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 34/39] net/dpaa: add support for hashed RSS Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 35/39] net/dpaa: add support for MAC address update Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 36/39] net/dpaa: add support for packet type parsing Shreyansh Jain
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 37/39] net/dpaa: add support for Scattered Rx Shreyansh Jain
2017-05-27 10:25 ` Shreyansh Jain [this message]
2017-05-27 10:25 ` [dpdk-dev] [RFC Patch 39/39] net/dpaa: add packet dump for debugging Shreyansh Jain
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495880735-1651-39-git-send-email-shreyansh.jain@nxp.com \
--to=shreyansh.jain@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=hemant.agrawal@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).