From: Nipun Gupta <nipun.gupta@nxp.com>
To: <dev@dpdk.org>
Cc: <hemant.agrawal@nxp.com>, <jerin.jacob@caviumnetworks.com>,
<harry.van.haaren@intel.com>, <bruce.richardson@intel.com>,
<gage.eads@intel.com>, <shreyansh.jain@nxp.com>,
Nipun Gupta <nipun.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH 08/21 v4] bus/fslmc: adding basic dpci support
Date: Thu, 29 Jun 2017 15:57:52 +0530 [thread overview]
Message-ID: <1498732085-18449-9-git-send-email-nipun.gupta@nxp.com> (raw)
In-Reply-To: <1498732085-18449-1-git-send-email-nipun.gupta@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
drivers/bus/fslmc/Makefile | 1 +
drivers/bus/fslmc/mc/dpci.c | 307 +++++++++++++++++++++
drivers/bus/fslmc/mc/fsl_dpci.h | 404 ++++++++++++++++++++++++++++
drivers/bus/fslmc/mc/fsl_dpci_cmd.h | 147 ++++++++++
drivers/bus/fslmc/rte_bus_fslmc_version.map | 1 +
5 files changed, 860 insertions(+)
create mode 100644 drivers/bus/fslmc/mc/dpci.c
create mode 100644 drivers/bus/fslmc/mc/fsl_dpci.h
create mode 100644 drivers/bus/fslmc/mc/fsl_dpci_cmd.h
diff --git a/drivers/bus/fslmc/Makefile b/drivers/bus/fslmc/Makefile
index 38d884e..4884d87 100644
--- a/drivers/bus/fslmc/Makefile
+++ b/drivers/bus/fslmc/Makefile
@@ -68,6 +68,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += \
mc/dpio.c \
mc/mc_sys.c \
mc/dpcon.c \
+ mc/dpci.c
SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += portal/dpaa2_hw_dpio.c
SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += portal/dpaa2_hw_dpbp.c
diff --git a/drivers/bus/fslmc/mc/dpci.c b/drivers/bus/fslmc/mc/dpci.c
new file mode 100644
index 0000000..0ea7837
--- /dev/null
+++ b/drivers/bus/fslmc/mc/dpci.c
@@ -0,0 +1,307 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <fsl_mc_sys.h>
+#include <fsl_mc_cmd.h>
+#include <fsl_dpci.h>
+#include <fsl_dpci_cmd.h>
+
+int dpci_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpci_id,
+ uint16_t *token)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_OPEN,
+ cmd_flags,
+ 0);
+ DPCI_CMD_OPEN(cmd, dpci_id);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ *token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+ return 0;
+}
+
+int dpci_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_CLOSE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpci_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpci_cfg *cfg,
+ uint32_t *obj_id)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_CREATE,
+ cmd_flags,
+ dprc_token);
+ DPCI_CMD_CREATE(cmd, cfg);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ CMD_CREATE_RSP_GET_OBJ_ID_PARAM0(cmd, *obj_id);
+
+ return 0;
+}
+
+int dpci_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_DESTROY,
+ cmd_flags,
+ dprc_token);
+ /* set object id to destroy */
+ CMD_DESTROY_SET_OBJ_ID_PARAM0(cmd, object_id);
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpci_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_ENABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpci_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_DISABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpci_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_IS_ENABLED, cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPCI_RSP_IS_ENABLED(cmd, *en);
+
+ return 0;
+}
+
+int dpci_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_RESET,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpci_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpci_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_GET_ATTR,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPCI_RSP_GET_ATTRIBUTES(cmd, attr);
+
+ return 0;
+}
+
+int dpci_set_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t priority,
+ const struct dpci_rx_queue_cfg *cfg)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_SET_RX_QUEUE,
+ cmd_flags,
+ token);
+ DPCI_CMD_SET_RX_QUEUE(cmd, priority, cfg);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+int dpci_get_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t priority,
+ struct dpci_rx_queue_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_GET_RX_QUEUE,
+ cmd_flags,
+ token);
+ DPCI_CMD_GET_RX_QUEUE(cmd, priority);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPCI_RSP_GET_RX_QUEUE(cmd, attr);
+
+ return 0;
+}
+
+int dpci_get_tx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t priority,
+ struct dpci_tx_queue_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_GET_TX_QUEUE,
+ cmd_flags,
+ token);
+ DPCI_CMD_GET_TX_QUEUE(cmd, priority);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPCI_RSP_GET_TX_QUEUE(cmd, attr);
+
+ return 0;
+}
+
+int dpci_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_GET_API_VERSION,
+ cmd_flags,
+ 0);
+
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ DPCI_RSP_GET_API_VERSION(cmd, *major_ver, *minor_ver);
+
+ return 0;
+}
diff --git a/drivers/bus/fslmc/mc/fsl_dpci.h b/drivers/bus/fslmc/mc/fsl_dpci.h
new file mode 100644
index 0000000..1e155dd
--- /dev/null
+++ b/drivers/bus/fslmc/mc/fsl_dpci.h
@@ -0,0 +1,404 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef __FSL_DPCI_H
+#define __FSL_DPCI_H
+
+/* Data Path Communication Interface API
+ * Contains initialization APIs and runtime control APIs for DPCI
+ */
+
+struct fsl_mc_io;
+
+/** General DPCI macros */
+
+/**
+ * Maximum number of Tx/Rx priorities per DPCI object
+ */
+#define DPCI_PRIO_NUM 2
+
+/**
+ * Indicates an invalid frame queue
+ */
+#define DPCI_FQID_NOT_VALID (uint32_t)(-1)
+
+/**
+ * All queues considered; see dpci_set_rx_queue()
+ */
+#define DPCI_ALL_QUEUES (uint8_t)(-1)
+
+/**
+ * dpci_open() - Open a control session for the specified object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @dpci_id: DPCI unique ID
+ * @token: Returned token; use in subsequent API calls
+ *
+ * This function can be used to open a control session for an
+ * already created object; an object may have been declared in
+ * the DPL or by calling the dpci_create() function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent commands for
+ * this specific object.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpci_id,
+ uint16_t *token);
+
+/**
+ * dpci_close() - Close the control session of the object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ *
+ * After this function is called, no further operations are
+ * allowed on the object without opening a new control session.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * Enable the Order Restoration support
+ */
+#define DPCI_OPT_HAS_OPR 0x000040
+
+/**
+ * Order Point Records are shared for the entire DPCI
+ */
+#define DPCI_OPT_OPR_SHARED 0x000080
+
+/**
+ * struct dpci_cfg - Structure representing DPCI configuration
+ * @options: Any combination of the following options:
+ * DPCI_OPT_HAS_OPR
+ * DPCI_OPT_OPR_SHARED
+ * @num_of_priorities: Number of receive priorities (queues) for the DPCI;
+ * note, that the number of transmit priorities (queues)
+ * is determined by the number of receive priorities of
+ * the peer DPCI object
+ */
+struct dpci_cfg {
+ uint32_t options;
+ uint8_t num_of_priorities;
+};
+
+/**
+ * dpci_create() - Create the DPCI object.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @dprc_token: Parent container token; '0' for default container
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @cfg: Configuration structure
+ * @obj_id: returned object id
+ *
+ * Create the DPCI object, allocate required resources and perform required
+ * initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ *
+ * The function accepts an authentication token of a parent
+ * container that this object should be assigned to. The token
+ * can be '0' so the object will be assigned to the default container.
+ * The newly created object can be opened with the returned
+ * object id and using the container's associated tokens and MC portals.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpci_cfg *cfg,
+ uint32_t *obj_id);
+
+/**
+ * dpci_destroy() - Destroy the DPCI object and release all its resources.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @dprc_token: Parent container token; '0' for default container
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @object_id: The object id; it must be a valid id within the container that
+ * created this object;
+ *
+ * The function accepts the authentication token of the parent container that
+ * created the object (not the one that currently owns the object). The object
+ * is searched within parent using the provided 'object_id'.
+ * All tokens to the object must be closed before calling destroy.
+ *
+ * Return: '0' on Success; error code otherwise.
+ */
+int dpci_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id);
+
+/**
+ * dpci_enable() - Enable the DPCI, allow sending and receiving frames.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpci_disable() - Disable the DPCI, stop sending and receiving frames.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpci_is_enabled() - Check if the DPCI is enabled.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @en: Returns '1' if object is enabled; '0' otherwise
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en);
+
+/**
+ * dpci_reset() - Reset the DPCI, returns the object to initial state.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * struct dpci_attr - Structure representing DPCI attributes
+ * @id: DPCI object ID
+ * @num_of_priorities: Number of receive priorities
+ */
+struct dpci_attr {
+ int id;
+ uint8_t num_of_priorities;
+};
+
+/**
+ * dpci_get_attributes() - Retrieve DPCI attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @attr: Returned object's attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpci_attr *attr);
+
+/**
+ * enum dpci_dest - DPCI destination types
+ * @DPCI_DEST_NONE: Unassigned destination; The queue is set in parked mode
+ * and does not generate FQDAN notifications; user is
+ * expected to dequeue from the queue based on polling or
+ * other user-defined method
+ * @DPCI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
+ * notifications to the specified DPIO; user is expected
+ * to dequeue from the queue only after notification is
+ * received
+ * @DPCI_DEST_DPCON: The queue is set in schedule mode and does not generate
+ * FQDAN notifications, but is connected to the specified
+ * DPCON object;
+ * user is expected to dequeue from the DPCON channel
+ */
+enum dpci_dest {
+ DPCI_DEST_NONE = 0,
+ DPCI_DEST_DPIO = 1,
+ DPCI_DEST_DPCON = 2
+};
+
+/**
+ * struct dpci_dest_cfg - Structure representing DPCI destination configuration
+ * @dest_type: Destination type
+ * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type
+ * @priority: Priority selection within the DPIO or DPCON channel; valid
+ * values are 0-1 or 0-7, depending on the number of priorities
+ * in that channel; not relevant for 'DPCI_DEST_NONE' option
+ */
+struct dpci_dest_cfg {
+ enum dpci_dest dest_type;
+ int dest_id;
+ uint8_t priority;
+};
+
+/** DPCI queue modification options */
+
+/**
+ * Select to modify the user's context associated with the queue
+ */
+#define DPCI_QUEUE_OPT_USER_CTX 0x00000001
+
+/**
+ * Select to modify the queue's destination
+ */
+#define DPCI_QUEUE_OPT_DEST 0x00000002
+
+/**
+ * struct dpci_rx_queue_cfg - Structure representing RX queue configuration
+ * @options: Flags representing the suggested modifications to the queue;
+ * Use any combination of 'DPCI_QUEUE_OPT_<X>' flags
+ * @user_ctx: User context value provided in the frame descriptor of each
+ * dequeued frame;
+ * valid only if 'DPCI_QUEUE_OPT_USER_CTX' is contained in
+ * 'options'
+ * @dest_cfg: Queue destination parameters;
+ * valid only if 'DPCI_QUEUE_OPT_DEST' is contained in 'options'
+ */
+struct dpci_rx_queue_cfg {
+ uint32_t options;
+ uint64_t user_ctx;
+ struct dpci_dest_cfg dest_cfg;
+};
+
+/**
+ * dpci_set_rx_queue() - Set Rx queue configuration
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @priority: Select the queue relative to number of
+ * priorities configured at DPCI creation; use
+ * DPCI_ALL_QUEUES to configure all Rx queues
+ * identically.
+ * @cfg: Rx queue configuration
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_set_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t priority,
+ const struct dpci_rx_queue_cfg *cfg);
+
+/**
+ * struct dpci_rx_queue_attr - Structure representing Rx queue attributes
+ * @user_ctx: User context value provided in the frame descriptor of each
+ * dequeued frame
+ * @dest_cfg: Queue destination configuration
+ * @fqid: Virtual FQID value to be used for dequeue operations
+ */
+struct dpci_rx_queue_attr {
+ uint64_t user_ctx;
+ struct dpci_dest_cfg dest_cfg;
+ uint32_t fqid;
+};
+
+/**
+ * dpci_get_rx_queue() - Retrieve Rx queue attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @priority: Select the queue relative to number of
+ * priorities configured at DPCI creation
+ * @attr: Returned Rx queue attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_get_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t priority,
+ struct dpci_rx_queue_attr *attr);
+
+/**
+ * struct dpci_tx_queue_attr - Structure representing attributes of Tx queues
+ * @fqid: Virtual FQID to be used for sending frames to peer DPCI;
+ * returns 'DPCI_FQID_NOT_VALID' if a no peer is connected or if
+ * the selected priority exceeds the number of priorities of the
+ * peer DPCI object
+ */
+struct dpci_tx_queue_attr {
+ uint32_t fqid;
+};
+
+/**
+ * dpci_get_tx_queue() - Retrieve Tx queue attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @priority: Select the queue relative to number of
+ * priorities of the peer DPCI object
+ * @attr: Returned Tx queue attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_get_tx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t priority,
+ struct dpci_tx_queue_attr *attr);
+
+/**
+ * dpci_get_api_version() - Get communication interface API version
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @major_ver: Major version of data path communication interface API
+ * @minor_ver: Minor version of data path communication interface API
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver);
+
+#endif /* __FSL_DPCI_H */
diff --git a/drivers/bus/fslmc/mc/fsl_dpci_cmd.h b/drivers/bus/fslmc/mc/fsl_dpci_cmd.h
new file mode 100644
index 0000000..6d4e273
--- /dev/null
+++ b/drivers/bus/fslmc/mc/fsl_dpci_cmd.h
@@ -0,0 +1,147 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_DPCI_CMD_H
+#define _FSL_DPCI_CMD_H
+
+/* DPCI Version */
+#define DPCI_VER_MAJOR 3
+#define DPCI_VER_MINOR 3
+
+/* Command IDs */
+#define DPCI_CMDID_CLOSE 0x8001
+#define DPCI_CMDID_OPEN 0x8071
+#define DPCI_CMDID_CREATE 0x9072
+#define DPCI_CMDID_DESTROY 0x9871
+#define DPCI_CMDID_GET_API_VERSION 0xa071
+
+#define DPCI_CMDID_ENABLE 0x0021
+#define DPCI_CMDID_DISABLE 0x0031
+#define DPCI_CMDID_GET_ATTR 0x0041
+#define DPCI_CMDID_RESET 0x0051
+#define DPCI_CMDID_IS_ENABLED 0x0061
+
+#define DPCI_CMDID_SET_IRQ_ENABLE 0x0121
+#define DPCI_CMDID_GET_IRQ_ENABLE 0x0131
+#define DPCI_CMDID_SET_IRQ_MASK 0x0141
+#define DPCI_CMDID_GET_IRQ_MASK 0x0151
+#define DPCI_CMDID_GET_IRQ_STATUS 0x0161
+#define DPCI_CMDID_CLEAR_IRQ_STATUS 0x0171
+
+#define DPCI_CMDID_SET_RX_QUEUE 0x0e01
+#define DPCI_CMDID_GET_LINK_STATE 0x0e11
+#define DPCI_CMDID_GET_PEER_ATTR 0x0e21
+#define DPCI_CMDID_GET_RX_QUEUE 0x0e31
+#define DPCI_CMDID_GET_TX_QUEUE 0x0e41
+#define DPCI_CMDID_SET_OPR 0x0e51
+#define DPCI_CMDID_GET_OPR 0x0e61
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_CMD_OPEN(cmd, dpci_id) \
+ MC_CMD_OP(cmd, 0, 0, 32, int, dpci_id)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_CMD_CREATE(cmd, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->num_of_priorities);\
+ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->options);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_RSP_IS_ENABLED(cmd, en) \
+ MC_RSP_OP(cmd, 0, 0, 1, int, en)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_RSP_GET_ATTRIBUTES(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, (attr)->id);\
+ MC_RSP_OP(cmd, 0, 48, 8, uint8_t, (attr)->num_of_priorities);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_RSP_GET_PEER_ATTR(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, attr->peer_id);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint8_t, attr->num_of_priorities);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_RSP_GET_LINK_STATE(cmd, up) \
+ MC_RSP_OP(cmd, 0, 0, 1, int, up)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_CMD_SET_RX_QUEUE(cmd, priority, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dest_cfg.dest_id);\
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->dest_cfg.priority);\
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, priority);\
+ MC_CMD_OP(cmd, 0, 48, 4, enum dpci_dest, cfg->dest_cfg.dest_type);\
+ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx);\
+ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->options);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_CMD_GET_RX_QUEUE(cmd, priority) \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, priority)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_RSP_GET_RX_QUEUE(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, attr->dest_cfg.dest_id);\
+ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->dest_cfg.priority);\
+ MC_RSP_OP(cmd, 0, 48, 4, enum dpci_dest, attr->dest_cfg.dest_type);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint64_t, attr->user_ctx);\
+ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->fqid);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_CMD_GET_TX_QUEUE(cmd, priority) \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, priority)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_RSP_GET_TX_QUEUE(cmd, attr) \
+ MC_RSP_OP(cmd, 0, 32, 32, uint32_t, attr->fqid)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPCI_RSP_GET_API_VERSION(cmd, major, minor) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, major);\
+ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, minor);\
+} while (0)
+
+#endif /* _FSL_DPCI_CMD_H */
diff --git a/drivers/bus/fslmc/rte_bus_fslmc_version.map b/drivers/bus/fslmc/rte_bus_fslmc_version.map
index 01a7939..cf7c0ee 100644
--- a/drivers/bus/fslmc/rte_bus_fslmc_version.map
+++ b/drivers/bus/fslmc/rte_bus_fslmc_version.map
@@ -53,6 +53,7 @@ DPDK_17.05 {
DPDK_17.08 {
global:
+ dpci_set_rx_queue;
dpcon_open;
dpcon_get_attributes;
mc_get_soc_version;
--
1.9.1
next prev parent reply other threads:[~2017-06-29 10:28 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1495735361-4840-1-git-send-email-nipun.gupta@nxp.com>
2017-06-15 8:58 ` [dpdk-dev] [PATCH 00/20 v2] next-eventdev: NXP DPAA2 eventdev PMD Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 01/20 v2] event/dpaa2: add basic build infrastructure Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 02/20 v2] bus/fslmc: generic framework for mc object creation Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 03/20 v2] bus/fslmc: integrating dpio and dpbp to object framework Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 04/20 v2] bus/fslmc: adding basic dpcon support Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 05/20 v2] bus/fslmc: export qbman dqrr funcs for eventdev usages Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 06/20 v2] event/dpaa2: register dpcon as dpaa2 device for bus scan Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 07/20 v2] bus/fslmc: adding basic dpci support Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 08/20 v2] bus/fslmc: register dpci as dpaa2 device for bus scan Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 09/20 v2] bus/fslmc: adding cpu support in stashing config Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 10/20 v2] event/dpaa2: add initialization of event device Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 11/20 v2] bus/fslmc: add support for static dequeue from portal Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 12/20 v2] event/dpaa2: add configuration functions Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 13/20 v2] bus/fslmc: support enqueue with multiple enqueue descriptors Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 14/20 v2] bus/fslmc: add callback per queue to enable Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 15/20 v2] bus/fslmc: change func argument to const to avoid warning Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 16/20 v2] event/dpaa2: add enqueue and dequeue functionality Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 17/20 v2] fslmc/bus: add interrupt enabling routine Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 18/20 v2] bus/fslmc: enable portal interrupt handling Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 19/20 v2] event/dpaa2: handle timeout using interrupts in dequeue Nipun Gupta
2017-06-15 8:58 ` [dpdk-dev] [PATCH 20/20 v2] doc: add NXP DPAA2 EVENTDEV details Nipun Gupta
2017-06-28 13:51 ` [dpdk-dev] [PATCH 00/20 v2] next-eventdev: NXP DPAA2 eventdev PMD Nipun Gupta
2017-06-29 6:39 ` Jerin Jacob
2017-06-28 15:15 ` [dpdk-dev] [PATCH 00/21 v3] " Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 01/21 v3] drivers: add bus dependency for event Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 02/21 v3] event/dpaa2: add basic build infrastructure Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 03/21 v3] bus/fslmc: generic framework for mc object creation Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 04/21 v3] bus/fslmc: integrating dpio and dpbp to object framework Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 05/21 v3] bus/fslmc: adding basic dpcon support Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 06/21 v3] bus/fslmc: export qbman dqrr funcs for eventdev usages Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 07/21 v3] event/dpaa2: register dpcon as dpaa2 device for bus scan Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 08/21 v3] bus/fslmc: adding basic dpci support Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 09/21 v3] bus/fslmc: register dpci as dpaa2 device for bus scan Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 10/21 v3] bus/fslmc: adding cpu support in stashing config Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 11/21 v3] event/dpaa2: add initialization of event device Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 12/21 v3] bus/fslmc: add support for static dequeue from portal Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 13/21 v3] event/dpaa2: add configuration functions Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 14/21 v3] bus/fslmc: support enqueue with multiple enqueue descriptors Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 15/21 v3] bus/fslmc: add callback per queue to enable Nipun Gupta
2017-06-28 15:15 ` [dpdk-dev] [PATCH 16/21 v3] bus/fslmc: change func argument to const to avoid warning Nipun Gupta
2017-06-28 15:16 ` [dpdk-dev] [PATCH 17/21 v3] event/dpaa2: add enqueue and dequeue functionality Nipun Gupta
2017-06-28 15:16 ` [dpdk-dev] [PATCH 18/21 v3] fslmc/bus: add interrupt enabling routine Nipun Gupta
2017-06-28 15:16 ` [dpdk-dev] [PATCH 19/21 v3] bus/fslmc: enable portal interrupt handling Nipun Gupta
2017-06-28 15:16 ` [dpdk-dev] [PATCH 20/21 v3] event/dpaa2: handle timeout using interrupts in dequeue Nipun Gupta
2017-06-28 15:16 ` [dpdk-dev] [PATCH 21/21 v3] doc: add NXP DPAA2 EVENTDEV details Nipun Gupta
2017-06-29 9:25 ` Jerin Jacob
2017-06-29 10:27 ` Nipun Gupta
2017-06-29 5:15 ` [dpdk-dev] [PATCH 00/21 v3] next-eventdev: NXP DPAA2 eventdev PMD Hemant Agrawal
2017-06-29 10:27 ` [dpdk-dev] [PATCH 00/21 v4] " Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 01/21 v4] drivers: add bus dependency for event Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 02/21 v4] event/dpaa2: add basic build infrastructure Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 03/21 v4] bus/fslmc: generic framework for mc object creation Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 04/21 v4] bus/fslmc: integrating dpio and dpbp to object framework Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 05/21 v4] bus/fslmc: adding basic dpcon support Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 06/21 v4] bus/fslmc: export qbman dqrr funcs for eventdev usages Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 07/21 v4] event/dpaa2: register dpcon as dpaa2 device for bus scan Nipun Gupta
2017-06-29 10:27 ` Nipun Gupta [this message]
2017-06-29 10:27 ` [dpdk-dev] [PATCH 09/21 v4] bus/fslmc: register dpci " Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 10/21 v4] bus/fslmc: adding cpu support in stashing config Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 11/21 v4] event/dpaa2: add initialization of event device Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 12/21 v4] bus/fslmc: add support for static dequeue from portal Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 13/21 v4] event/dpaa2: add configuration functions Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 14/21 v4] bus/fslmc: support enqueue with multiple enqueue descriptors Nipun Gupta
2017-06-29 10:27 ` [dpdk-dev] [PATCH 15/21 v4] bus/fslmc: add callback per queue to enable Nipun Gupta
2017-06-29 10:28 ` [dpdk-dev] [PATCH 16/21 v4] bus/fslmc: change func argument to const to avoid warning Nipun Gupta
2017-06-29 10:28 ` [dpdk-dev] [PATCH 17/21 v4] event/dpaa2: add enqueue and dequeue functionality Nipun Gupta
2017-06-29 10:28 ` [dpdk-dev] [PATCH 18/21 v4] fslmc/bus: add interrupt enabling routine Nipun Gupta
2017-06-29 10:28 ` [dpdk-dev] [PATCH 19/21 v4] bus/fslmc: enable portal interrupt handling Nipun Gupta
2017-06-29 10:28 ` [dpdk-dev] [PATCH 20/21 v4] event/dpaa2: handle timeout using interrupts in dequeue Nipun Gupta
2017-06-29 10:28 ` [dpdk-dev] [PATCH 21/21 v4] doc: add NXP DPAA2 EVENTDEV details Nipun Gupta
2017-06-29 11:03 ` [dpdk-dev] [PATCH 00/21 v4] next-eventdev: NXP DPAA2 eventdev PMD Jerin Jacob
2017-06-30 7:30 ` Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 00/21 v5] " Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 01/21 v5] drivers: add bus dependency for event Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 02/21 v5] event/dpaa2: add basic build infrastructure Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 03/21 v5] bus/fslmc: generic framework for mc object creation Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 04/21 v5] bus/fslmc: integrating dpio and dpbp to object framework Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 05/21 v5] bus/fslmc: adding basic dpcon support Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 06/21 v5] bus/fslmc: export qbman dqrr funcs for eventdev usages Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 07/21 v5] event/dpaa2: register dpcon as dpaa2 device for bus scan Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 08/21 v5] bus/fslmc: adding basic dpci support Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 09/21 v5] bus/fslmc: register dpci as dpaa2 device for bus scan Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 10/21 v5] bus/fslmc: adding cpu support in stashing config Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 11/21 v5] event/dpaa2: add initialization of event device Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 12/21 v5] bus/fslmc: add support for static dequeue from portal Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 13/21 v5] event/dpaa2: add configuration functions Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 14/21 v5] bus/fslmc: support enqueue with multiple enqueue descriptors Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 15/21 v5] bus/fslmc: add callback per queue to enable Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 16/21 v5] bus/fslmc: change func argument to const to avoid warning Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 17/21 v5] event/dpaa2: add enqueue and dequeue functionality Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 18/21 v5] bus/fslmc: add interrupt enabling routine Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 19/21 v5] bus/fslmc: enable portal interrupt handling Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 20/21 v5] event/dpaa2: handle timeout using interrupts in dequeue Nipun Gupta
2017-06-30 8:54 ` [dpdk-dev] [PATCH 21/21 v5] doc: add NXP DPAA2 EVENTDEV details Nipun Gupta
2017-06-30 12:13 ` Mcnamara, John
2017-07-01 12:24 ` Jerin Jacob
2017-07-04 6:55 ` Jerin Jacob
2017-07-01 12:28 ` [dpdk-dev] [PATCH 00/21 v5] next-eventdev: NXP DPAA2 eventdev PMD Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498732085-18449-9-git-send-email-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gage.eads@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=shreyansh.jain@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).