From: "Charles (Chas) Williams" <ciwillia@brocade.com>
To: <dev@dpdk.org>
Cc: <skhare@vmware.com>, "Charles (Chas) Williams" <ciwillia@brocade.com>
Subject: [dpdk-dev] [PATCH] net/vmxnet3: avoid code duplication
Date: Thu, 29 Jun 2017 15:35:50 -0400 [thread overview]
Message-ID: <1498764950-30821-1-git-send-email-ciwillia@brocade.com> (raw)
Refactor vmxnet3_post_rx_bufs() to call vmxnet3_renew_desc()
to update the newly allocated mbufs. While here, relocate the
relevant comments to vmxnet3_renew_desc().
Signed-off-by: Chas Williams <ciwillia@brocade.com>
---
drivers/net/vmxnet3/vmxnet3_rxtx.c | 61 +++++++++++++-------------------------
1 file changed, 21 insertions(+), 40 deletions(-)
diff --git a/drivers/net/vmxnet3/vmxnet3_rxtx.c b/drivers/net/vmxnet3/vmxnet3_rxtx.c
index 13c73f6..d9cf437 100644
--- a/drivers/net/vmxnet3/vmxnet3_rxtx.c
+++ b/drivers/net/vmxnet3/vmxnet3_rxtx.c
@@ -593,24 +593,40 @@ static inline void
vmxnet3_renew_desc(vmxnet3_rx_queue_t *rxq, uint8_t ring_id,
struct rte_mbuf *mbuf)
{
- uint32_t val = 0;
+ uint32_t val;
struct vmxnet3_cmd_ring *ring = &rxq->cmd_ring[ring_id];
struct Vmxnet3_RxDesc *rxd =
(struct Vmxnet3_RxDesc *)(ring->base + ring->next2fill);
vmxnet3_buf_info_t *buf_info = &ring->buf_info[ring->next2fill];
- if (ring_id == 0)
+ if (ring_id == 0) {
+ /* Usually: One HEAD type buf per packet
+ * val = (ring->next2fill % rxq->hw->bufs_per_pkt) ?
+ * VMXNET3_RXD_BTYPE_BODY : VMXNET3_RXD_BTYPE_HEAD;
+ */
+
+ /* We use single packet buffer so all heads here */
val = VMXNET3_RXD_BTYPE_HEAD;
- else
+ } else {
+ /* All BODY type buffers for 2nd ring */
val = VMXNET3_RXD_BTYPE_BODY;
+ }
+ /*
+ * Load mbuf pointer into buf_info[ring_size]
+ * buf_info structure is equivalent to cookie for virtio-virtqueue
+ */
buf_info->m = mbuf;
buf_info->len = (uint16_t)(mbuf->buf_len - RTE_PKTMBUF_HEADROOM);
buf_info->bufPA = rte_mbuf_data_dma_addr_default(mbuf);
+ /* Load Rx Descriptor with the buffer's GPA */
rxd->addr = buf_info->bufPA;
+
+ /* After this point rxd->addr MUST not be NULL */
rxd->btype = val;
rxd->len = buf_info->len;
+ /* Flip gen bit at the end to change ownership */
rxd->gen = ring->gen;
vmxnet3_cmd_ring_adv_next2fill(ring);
@@ -629,28 +645,11 @@ static int
vmxnet3_post_rx_bufs(vmxnet3_rx_queue_t *rxq, uint8_t ring_id)
{
int err = 0;
- uint32_t i = 0, val = 0;
+ uint32_t i = 0;
struct vmxnet3_cmd_ring *ring = &rxq->cmd_ring[ring_id];
- if (ring_id == 0) {
- /* Usually: One HEAD type buf per packet
- * val = (ring->next2fill % rxq->hw->bufs_per_pkt) ?
- * VMXNET3_RXD_BTYPE_BODY : VMXNET3_RXD_BTYPE_HEAD;
- */
-
- /* We use single packet buffer so all heads here */
- val = VMXNET3_RXD_BTYPE_HEAD;
- } else {
- /* All BODY type buffers for 2nd ring */
- val = VMXNET3_RXD_BTYPE_BODY;
- }
-
while (vmxnet3_cmd_ring_desc_avail(ring) > 0) {
- struct Vmxnet3_RxDesc *rxd;
struct rte_mbuf *mbuf;
- vmxnet3_buf_info_t *buf_info = &ring->buf_info[ring->next2fill];
-
- rxd = (struct Vmxnet3_RxDesc *)(ring->base + ring->next2fill);
/* Allocate blank mbuf for the current Rx Descriptor */
mbuf = rte_mbuf_raw_alloc(rxq->mp);
@@ -661,25 +660,7 @@ vmxnet3_post_rx_bufs(vmxnet3_rx_queue_t *rxq, uint8_t ring_id)
break;
}
- /*
- * Load mbuf pointer into buf_info[ring_size]
- * buf_info structure is equivalent to cookie for virtio-virtqueue
- */
- buf_info->m = mbuf;
- buf_info->len = (uint16_t)(mbuf->buf_len -
- RTE_PKTMBUF_HEADROOM);
- buf_info->bufPA = rte_mbuf_data_dma_addr_default(mbuf);
-
- /* Load Rx Descriptor with the buffer's GPA */
- rxd->addr = buf_info->bufPA;
-
- /* After this point rxd->addr MUST not be NULL */
- rxd->btype = val;
- rxd->len = buf_info->len;
- /* Flip gen bit at the end to change ownership */
- rxd->gen = ring->gen;
-
- vmxnet3_cmd_ring_adv_next2fill(ring);
+ vmxnet3_renew_desc(rxq, ring_id, mbuf);
i++;
}
--
2.1.4
next reply other threads:[~2017-06-29 19:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-29 19:35 Charles (Chas) Williams [this message]
2017-07-05 14:55 ` Ferruh Yigit
2017-07-05 14:58 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498764950-30821-1-git-send-email-ciwillia@brocade.com \
--to=ciwillia@brocade.com \
--cc=dev@dpdk.org \
--cc=skhare@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).