[dpdk-dev] [PATCH] net/failsafe: fix calling device during RMV events

[Ophir Munk <ophirmu@mellanox.com>]

This commit prevents control path operations from failing after a sub
device has informed failsafe it has been removed.

Before this commit if a device was removed and then a control path
operations was initiated on failsafe - in some cases failsafe called the
sub device operation instead of avoiding it. Such cases could lead to
operations failures.

This commit fixes failsafe criteria to determine when the device is removed
such that it will avoid calling the sub device operations during that time
and will only call them otherwise.

Fixes: a46f8d584eb8 ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
---
 drivers/net/failsafe/failsafe_ether.c |  1 +
 drivers/net/failsafe/failsafe_ops.c   | 52 +++++++++++++++++++++++++++++------
 2 files changed, 45 insertions(+), 8 deletions(-)

diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index a3a8cce..1def110 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -378,6 +378,7 @@
 				      i);
 				goto err_remove;
 			}
+			sdev->remove = 0;
 		}
 	}
 	/*
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index ff9ad15..314d53d 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -232,7 +232,6 @@
 			dev->data->dev_conf.intr_conf.lsc = 0;
 		}
 		DEBUG("Configuring sub-device %d", i);
-		sdev->remove = 0;
 		ret = rte_eth_dev_configure(PORT_ID(sdev),
 					dev->data->nb_rx_queues,
 					dev->data->nb_tx_queues,
@@ -311,6 +310,8 @@
 	int ret;
 
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		DEBUG("Calling rte_eth_dev_set_link_up on sub_device %d", i);
 		ret = rte_eth_dev_set_link_up(PORT_ID(sdev));
 		if (ret) {
@@ -330,6 +331,8 @@
 	int ret;
 
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		DEBUG("Calling rte_eth_dev_set_link_down on sub_device %d", i);
 		ret = rte_eth_dev_set_link_down(PORT_ID(sdev));
 		if (ret) {
@@ -517,8 +520,11 @@
 	struct sub_device *sdev;
 	uint8_t i;
 
-	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		rte_eth_promiscuous_enable(PORT_ID(sdev));
+	}
 }
 
 static void
@@ -527,8 +533,11 @@
 	struct sub_device *sdev;
 	uint8_t i;
 
-	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		rte_eth_promiscuous_disable(PORT_ID(sdev));
+	}
 }
 
 static void
@@ -537,8 +546,11 @@
 	struct sub_device *sdev;
 	uint8_t i;
 
-	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		rte_eth_allmulticast_enable(PORT_ID(sdev));
+	}
 }
 
 static void
@@ -547,8 +559,11 @@
 	struct sub_device *sdev;
 	uint8_t i;
 
-	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		rte_eth_allmulticast_disable(PORT_ID(sdev));
+	}
 }
 
 static int
@@ -560,6 +575,8 @@
 	int ret;
 
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		DEBUG("Calling link_update on sub_device %d", i);
 		ret = (SUBOPS(sdev, link_update))(ETH(sdev), wait_to_complete);
 		if (ret && ret != -1) {
@@ -597,8 +614,11 @@
 	struct sub_device *sdev;
 	uint8_t i;
 
-	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		rte_eth_stats_reset(PORT_ID(sdev));
+	}
 }
 
 /**
@@ -693,6 +713,8 @@
 	int ret;
 
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		DEBUG("Calling rte_eth_dev_set_mtu on sub_device %d", i);
 		ret = rte_eth_dev_set_mtu(PORT_ID(sdev), mtu);
 		if (ret) {
@@ -712,6 +734,8 @@
 	int ret;
 
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		DEBUG("Calling rte_eth_dev_vlan_filter on sub_device %d", i);
 		ret = rte_eth_dev_vlan_filter(PORT_ID(sdev), vlan_id, on);
 		if (ret) {
@@ -746,6 +770,8 @@
 	int ret;
 
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		DEBUG("Calling rte_eth_dev_flow_ctrl_set on sub_device %d", i);
 		ret = rte_eth_dev_flow_ctrl_set(PORT_ID(sdev), fc_conf);
 		if (ret) {
@@ -766,9 +792,12 @@
 	/* No check: already done within the rte_eth_dev_mac_addr_remove
 	 * call for the fail-safe device.
 	 */
-	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		rte_eth_dev_mac_addr_remove(PORT_ID(sdev),
 				&dev->data->mac_addrs[index]);
+	}
 	PRIV(dev)->mac_addr_pool[index] = 0;
 }
 
@@ -784,6 +813,8 @@
 
 	RTE_ASSERT(index < FAILSAFE_MAX_ETHADDR);
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		ret = rte_eth_dev_mac_addr_add(PORT_ID(sdev), mac_addr, vmdq);
 		if (ret) {
 			ERROR("Operation rte_eth_dev_mac_addr_add failed for sub_device %"
@@ -805,8 +836,11 @@
 	struct sub_device *sdev;
 	uint8_t i;
 
-	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE)
+	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		rte_eth_dev_default_mac_addr_set(PORT_ID(sdev), mac_addr);
+	}
 }
 
 static int
@@ -825,6 +859,8 @@
 		return 0;
 	}
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
+		if (sdev->remove)
+			continue;
 		DEBUG("Calling rte_eth_dev_filter_ctrl on sub_device %d", i);
 		ret = rte_eth_dev_filter_ctrl(PORT_ID(sdev), type, op, arg);
 		if (ret) {
-- 
1.8.3.1