[dpdk-dev] [PATCH 08/53] net/qede/base: add API to configure coalescing for VF queues

[Rasesh Mody <rasesh.mody@cavium.com>]

Add API for PF to configure coalescing for VF queues.

Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
---
 drivers/net/qede/base/ecore_iov_api.h |   21 ++++++++
 drivers/net/qede/base/ecore_sriov.c   |   89 +++++++++++++++++++++++++++++++++
 drivers/net/qede/base/ecore_sriov.h   |    3 ++
 3 files changed, 113 insertions(+)

diff --git a/drivers/net/qede/base/ecore_iov_api.h b/drivers/net/qede/base/ecore_iov_api.h
index 50cb3f2..4fce6b6 100644
--- a/drivers/net/qede/base/ecore_iov_api.h
+++ b/drivers/net/qede/base/ecore_iov_api.h
@@ -693,9 +693,30 @@ bool ecore_iov_is_vf_started(struct ecore_hwfn *p_hwfn,
  * @return - rate in Mbps
  */
 int ecore_iov_get_vf_min_rate(struct ecore_hwfn *p_hwfn, int vfid);
+
 #endif
 
 /**
+ * @brief ecore_pf_configure_vf_queue_coalesce - PF configure coalesce
+ *    parameters of VFs for Rx and Tx queue.
+ *    While the API allows setting coalescing per-qid, all queues sharing a SB
+ *    should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
+ *    otherwise configuration would break.
+ *
+ * @param p_hwfn
+ * @param rx_coal - Rx Coalesce value in micro seconds.
+ * @param tx_coal - TX Coalesce value in micro seconds.
+ * @param vf_id
+ * @param qid
+ *
+ * @return int
+ **/
+enum _ecore_status_t
+ecore_iov_pf_configure_vf_queue_coalesce(struct ecore_hwfn *p_hwfn,
+					 u16 rx_coal, u16 tx_coal,
+					 u16 vf_id, u16 qid);
+
+/**
  * @brief - Given a VF index, return index of next [including that] active VF.
  *
  * @param p_hwfn
diff --git a/drivers/net/qede/base/ecore_sriov.c b/drivers/net/qede/base/ecore_sriov.c
index 1ec6451..3f500d3 100644
--- a/drivers/net/qede/base/ecore_sriov.c
+++ b/drivers/net/qede/base/ecore_sriov.c
@@ -3475,6 +3475,7 @@ static void ecore_iov_vf_pf_set_coalesce(struct ecore_hwfn *p_hwfn,
 				   vf->abs_vf_id, vf->vf_queues[qid].fw_rx_qid);
 			goto out;
 		}
+		vf->rx_coal = rx_coal;
 	}
 
 	/* TODO - in future, it might be possible to pass this in a per-cid
@@ -3499,6 +3500,7 @@ static void ecore_iov_vf_pf_set_coalesce(struct ecore_hwfn *p_hwfn,
 				goto out;
 			}
 		}
+		vf->tx_coal = tx_coal;
 	}
 
 	status = PFVF_STATUS_SUCCESS;
@@ -3507,6 +3509,93 @@ static void ecore_iov_vf_pf_set_coalesce(struct ecore_hwfn *p_hwfn,
 			       sizeof(struct pfvf_def_resp_tlv), status);
 }
 
+enum _ecore_status_t
+ecore_iov_pf_configure_vf_queue_coalesce(struct ecore_hwfn *p_hwfn,
+					 u16 rx_coal, u16 tx_coal,
+					 u16 vf_id, u16 qid)
+{
+	struct ecore_queue_cid *p_cid;
+	struct ecore_vf_info *vf;
+	struct ecore_ptt *p_ptt;
+	int i, rc = 0;
+
+	if (!ecore_iov_is_valid_vfid(p_hwfn, vf_id, true, true)) {
+		DP_NOTICE(p_hwfn, true,
+			  "VF[%d] - Can not set coalescing: VF is not active\n",
+			  vf_id);
+		return ECORE_INVAL;
+	}
+
+	vf = &p_hwfn->pf_iov_info->vfs_array[vf_id];
+	p_ptt = ecore_ptt_acquire(p_hwfn);
+	if (!p_ptt)
+		return ECORE_AGAIN;
+
+	if (!ecore_iov_validate_rxq(p_hwfn, vf, qid,
+				    ECORE_IOV_VALIDATE_Q_ENABLE) &&
+	    rx_coal) {
+		DP_ERR(p_hwfn, "VF[%d]: Invalid Rx queue_id = %d\n",
+		       vf->abs_vf_id, qid);
+		goto out;
+	}
+
+	if (!ecore_iov_validate_txq(p_hwfn, vf, qid,
+				    ECORE_IOV_VALIDATE_Q_ENABLE) &&
+	    tx_coal) {
+		DP_ERR(p_hwfn, "VF[%d]: Invalid Tx queue_id = %d\n",
+		       vf->abs_vf_id, qid);
+		goto out;
+	}
+
+	DP_VERBOSE(p_hwfn, ECORE_MSG_IOV,
+		   "VF[%d]: Setting coalesce for VF rx_coal = %d, tx_coal = %d at queue = %d\n",
+		   vf->abs_vf_id, rx_coal, tx_coal, qid);
+
+	if (rx_coal) {
+		p_cid = ecore_iov_get_vf_rx_queue_cid(p_hwfn, vf,
+						      &vf->vf_queues[qid]);
+
+		rc = ecore_set_rxq_coalesce(p_hwfn, p_ptt, rx_coal, p_cid);
+		if (rc != ECORE_SUCCESS) {
+			DP_VERBOSE(p_hwfn, ECORE_MSG_IOV,
+				   "VF[%d]: Unable to set rx queue = %d coalesce\n",
+				   vf->abs_vf_id, vf->vf_queues[qid].fw_rx_qid);
+			goto out;
+		}
+		vf->rx_coal = rx_coal;
+	}
+
+	/* TODO - in future, it might be possible to pass this in a per-cid
+	 * granularity. For now, do this for all Tx queues.
+	 */
+	if (tx_coal) {
+		struct ecore_vf_queue *p_queue = &vf->vf_queues[qid];
+
+		for (i = 0; i < MAX_QUEUES_PER_QZONE; i++) {
+			if (p_queue->cids[i].p_cid == OSAL_NULL)
+				continue;
+
+			if (!p_queue->cids[i].b_is_tx)
+				continue;
+
+			rc = ecore_set_txq_coalesce(p_hwfn, p_ptt, tx_coal,
+						    p_queue->cids[i].p_cid);
+			if (rc != ECORE_SUCCESS) {
+				DP_VERBOSE(p_hwfn, ECORE_MSG_IOV,
+					   "VF[%d]: Unable to set tx queue coalesce\n",
+					   vf->abs_vf_id);
+				goto out;
+			}
+		}
+		vf->tx_coal = tx_coal;
+	}
+
+out:
+	ecore_ptt_release(p_hwfn, p_ptt);
+
+	return rc;
+}
+
 static enum _ecore_status_t
 ecore_iov_vf_flr_poll_dorq(struct ecore_hwfn *p_hwfn,
 			   struct ecore_vf_info *p_vf, struct ecore_ptt *p_ptt)
diff --git a/drivers/net/qede/base/ecore_sriov.h b/drivers/net/qede/base/ecore_sriov.h
index 1750f0d..ade74c9 100644
--- a/drivers/net/qede/base/ecore_sriov.h
+++ b/drivers/net/qede/base/ecore_sriov.h
@@ -133,6 +133,9 @@ struct ecore_vf_info {
 	u8			num_rxqs;
 	u8			num_txqs;
 
+	u16			rx_coal;
+	u16			tx_coal;
+
 	u8			num_sbs;
 
 	u8			num_mac_filters;
-- 
1.7.10.3