DPDK patches and discussions
 help / color / mirror / Atom feed
From: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
To: cristian.dumitrescu@intel.com, stephen@networkplumber.org
Cc: dev@dpdk.org, Pavan Bhagavatula <pbhagavatula@caviumnetworks.com>
Subject: [dpdk-dev]  [PATCH v2 2/3] test: add test for bitmap operations
Date: Wed, 20 Sep 2017 21:07:12 +0530	[thread overview]
Message-ID: <1505921833-2286-2-git-send-email-pbhagavatula@caviumnetworks.com> (raw)
In-Reply-To: <1505921833-2286-1-git-send-email-pbhagavatula@caviumnetworks.com>

From: Pavan Bhagavatula <pbhagavatula@caviumnetworks.com>

This patch adds a test for verifying the bitmap operations.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 test/test/Makefile      |   1 +
 test/test/test_bitmap.c | 192 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 193 insertions(+)
 create mode 100644 test/test/test_bitmap.c

diff --git a/test/test/Makefile b/test/test/Makefile
index 42d9a49..2fda8d9 100644
--- a/test/test/Makefile
+++ b/test/test/Makefile
@@ -94,6 +94,7 @@ SRCS-y += test_cycles.c
 SRCS-y += test_spinlock.c
 SRCS-y += test_memory.c
 SRCS-y += test_memzone.c
+SRCS-y += test_bitmap.c
 
 SRCS-y += test_ring.c
 SRCS-y += test_ring_perf.c
diff --git a/test/test/test_bitmap.c b/test/test/test_bitmap.c
new file mode 100644
index 0000000..5c9eee9
--- /dev/null
+++ b/test/test/test_bitmap.c
@@ -0,0 +1,192 @@
+/*
+ *   BSD LICENSE
+ *
+ *   Copyright (C) Cavium, Inc. 2017.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Cavium, Inc nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <inttypes.h>
+
+#include <rte_common.h>
+#include <rte_bitmap.h>
+#include <rte_malloc.h>
+
+#include "test.h"
+
+#define MAX_BITS 1000
+
+static int
+test_bitmap_scan_operations(struct rte_bitmap *bmp)
+{
+	uint32_t pos = 0;
+	uint64_t slab1_magic = 0xBADC0FFEEBADF00D;
+	uint64_t slab2_magic = 0xFEEDDEADDEADF00D;
+	uint64_t out_slab = 0;
+
+	rte_bitmap_reset(bmp);
+
+	rte_bitmap_set_slab(bmp, pos, slab1_magic);
+	rte_bitmap_set_slab(bmp, pos + RTE_BITMAP_SLAB_BIT_SIZE, slab2_magic);
+
+	if (!rte_bitmap_scan(bmp, &pos, &out_slab)) {
+		printf("Failed to get slab from bitmap.\n");
+		return TEST_FAILED;
+	}
+
+	if (slab1_magic != out_slab) {
+		printf("Scan operation sanity failed.\n");
+		return TEST_FAILED;
+	}
+
+	if (!rte_bitmap_scan(bmp, &pos, &out_slab)) {
+		printf("Failed to get slab from bitmap.\n");
+		return TEST_FAILED;
+	}
+
+	if (slab2_magic != out_slab) {
+		printf("Scan operation sanity failed.\n");
+		return TEST_FAILED;
+	}
+
+	/* Wrap around */
+	if (!rte_bitmap_scan(bmp, &pos, &out_slab)) {
+		printf("Failed to get slab from bitmap.\n");
+		return TEST_FAILED;
+	}
+
+	if (slab1_magic != out_slab) {
+		printf("Scan operation wrap around failed.\n");
+		return TEST_FAILED;
+	}
+
+	/* Scan reset check. */
+	__rte_bitmap_scan_init(bmp);
+
+	if (!rte_bitmap_scan(bmp, &pos, &out_slab)) {
+		printf("Failed to get slab from bitmap.\n");
+		return TEST_FAILED;
+	}
+
+	if (slab1_magic != out_slab) {
+		printf("Scan reset operation failed.\n");
+		return TEST_FAILED;
+	}
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_bitmap_slab_set_get(struct rte_bitmap *bmp)
+{
+	uint32_t pos = 0;
+	uint64_t slab_magic = 0xBADC0FFEEBADF00D;
+	uint64_t out_slab = 0;
+
+	rte_bitmap_reset(bmp);
+	rte_bitmap_set_slab(bmp, pos, slab_magic);
+
+	if (!rte_bitmap_scan(bmp, &pos, &out_slab)) {
+		printf("Failed to get slab from bitmap.\n");
+		return TEST_FAILED;
+	}
+
+
+	if (slab_magic != out_slab) {
+		printf("Invalid slab in bitmap.\n");
+		return TEST_FAILED;
+	}
+
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_bitmap_set_get_clear(struct rte_bitmap *bmp)
+{
+	int i;
+
+	rte_bitmap_reset(bmp);
+	for (i = 0; i < MAX_BITS; i++)
+		rte_bitmap_set(bmp, i);
+
+	for (i = 0; i < MAX_BITS; i++) {
+		if (!rte_bitmap_get(bmp, i)) {
+			printf("Failed to get set bit.\n");
+			return TEST_FAILED;
+		}
+	}
+
+	for (i = 0; i < MAX_BITS; i++)
+		rte_bitmap_clear(bmp, i);
+
+	for (i = 0; i < MAX_BITS; i++) {
+		if (rte_bitmap_get(bmp, i)) {
+			printf("Failed to clear set bit.\n");
+			return TEST_FAILED;
+		}
+	}
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_bitmap(void)
+{
+	void *mem;
+	uint32_t bmp_size;
+	struct rte_bitmap *bmp;
+
+	bmp_size =
+		rte_bitmap_get_memory_footprint(MAX_BITS);
+
+	mem = rte_zmalloc("test_bmap", bmp_size, RTE_CACHE_LINE_SIZE);
+	if (mem == NULL) {
+		printf("Failed to allocate memory for bitmap\n");
+		return TEST_FAILED;
+	}
+
+	bmp = rte_bitmap_init(MAX_BITS, mem, bmp_size);
+	if (bmp == NULL) {
+		printf("Failed to init bitmap\n");
+		return TEST_FAILED;
+	}
+
+	if (test_bitmap_set_get_clear(bmp) < 0)
+		return TEST_FAILED;
+
+	if (test_bitmap_slab_set_get(bmp) < 0)
+		return TEST_FAILED;
+
+	if (test_bitmap_scan_operations(bmp) < 0)
+		return TEST_FAILED;
+
+	return TEST_SUCCESS;
+}
+
+REGISTER_TEST_COMMAND(bitmap_test, test_bitmap);
-- 
2.7.4

  reply	other threads:[~2017-09-20 15:38 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-07 14:39 [dpdk-dev] [PATCH 1/2] eal: move bitmap from lib sched Pavan Nikhilesh
2017-09-07 14:39 ` [dpdk-dev] [PATCH 2/2] test: add test for bitmap operations Pavan Nikhilesh
2017-09-20 13:27 ` [dpdk-dev] [PATCH 1/2] eal: move bitmap from lib sched Dumitrescu, Cristian
2017-09-20 13:32   ` Pavan Nikhilesh Bhagavatula
2017-09-20 15:37 ` [dpdk-dev] [PATCH v2 1/3] " Pavan Nikhilesh
2017-09-20 15:37   ` Pavan Nikhilesh [this message]
2017-09-20 15:37   ` [dpdk-dev] [PATCH v2 3/3] maintainers: add maintainer for bitmap Pavan Nikhilesh
2017-09-20 15:40   ` [dpdk-dev] [PATCH v2 1/3] eal: move bitmap from lib sched Dumitrescu, Cristian
2017-09-20 15:44     ` Pavan Nikhilesh Bhagavatula
2017-09-20 16:39       ` Dumitrescu, Cristian
2017-09-20 17:25         ` Pavan Nikhilesh Bhagavatula
2017-09-21 10:25   ` Dumitrescu, Cristian
2017-09-21 10:38     ` Pavan Nikhilesh Bhagavatula
2017-09-21 11:50   ` [dpdk-dev] [PATCH v3 " Pavan Nikhilesh
2017-09-21 11:50     ` [dpdk-dev] [PATCH v3 2/3] test: add test for bitmap operations Pavan Nikhilesh
2017-09-21 11:50     ` [dpdk-dev] [PATCH v3 3/3] maintainers: add maintainer for bitmap Pavan Nikhilesh
2017-09-21 14:03     ` [dpdk-dev] [PATCH v3 1/3] eal: move bitmap from lib sched Dumitrescu, Cristian
2017-10-12 20:25       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1505921833-2286-2-git-send-email-pbhagavatula@caviumnetworks.com \
    --to=pbhagavatula@caviumnetworks.com \
    --cc=cristian.dumitrescu@intel.com \
    --cc=dev@dpdk.org \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).