From: Nipun Gupta <nipun.gupta@nxp.com>
To: <dev@dpdk.org>
Cc: <hemant.agrawal@nxp.com>, <jerin.jacob@caviumnetworks.com>,
<nikhil.rao@intel.com>, Nipun Gupta <nipun.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH 1/4] drivers: add queue parameter in event processing callback
Date: Tue, 10 Oct 2017 23:21:24 +0530 [thread overview]
Message-ID: <1507657887-11366-1-git-send-email-nipun.gupta@nxp.com> (raw)
For event dequeues for ethernet queues, a dpaa2_queue structure is
required to get the configuration for that ethernet queue. Based on
this configuration the rte_event is to be filled at the ingress side.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
---
These patches are based on the below patch series:
http://dpdk.org/dev/patchwork/patch/29806/
drivers/bus/fslmc/portal/dpaa2_hw_pvt.h | 4 ++++
drivers/event/dpaa2/dpaa2_eventdev.c | 8 +++++++-
2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
index 5d7a828..0d5be29 100644
--- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
+++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
@@ -124,9 +124,12 @@ struct queue_storage_info_t {
int toggle;
};
+struct dpaa2_queue;
+
typedef void (dpaa2_queue_cb_dqrr_t)(struct qbman_swp *swp,
const struct qbman_fd *fd,
const struct qbman_result *dq,
+ struct dpaa2_queue *rxq,
struct rte_event *ev);
struct dpaa2_queue {
@@ -143,6 +146,7 @@ struct dpaa2_queue {
struct queue_storage_info_t *q_storage;
struct qbman_result *cscn;
};
+ struct rte_event ev;
dpaa2_queue_cb_dqrr_t *cb;
};
diff --git a/drivers/event/dpaa2/dpaa2_eventdev.c b/drivers/event/dpaa2/dpaa2_eventdev.c
index cf2d274..6967741 100644
--- a/drivers/event/dpaa2/dpaa2_eventdev.c
+++ b/drivers/event/dpaa2/dpaa2_eventdev.c
@@ -189,10 +189,14 @@ static void dpaa2_eventdev_dequeue_wait(uint64_t timeout_ticks)
static void dpaa2_eventdev_process_parallel(struct qbman_swp *swp,
const struct qbman_fd *fd,
const struct qbman_result *dq,
+ struct dpaa2_queue *rxq,
struct rte_event *ev)
{
struct rte_event *ev_temp =
(struct rte_event *)DPAA2_GET_FD_ADDR(fd);
+
+ RTE_SET_USED(rxq);
+
rte_memcpy(ev, ev_temp, sizeof(struct rte_event));
rte_free(ev_temp);
@@ -202,6 +206,7 @@ static void dpaa2_eventdev_process_parallel(struct qbman_swp *swp,
static void dpaa2_eventdev_process_atomic(struct qbman_swp *swp,
const struct qbman_fd *fd,
const struct qbman_result *dq,
+ struct dpaa2_queue *rxq,
struct rte_event *ev)
{
struct rte_event *ev_temp =
@@ -209,6 +214,7 @@ static void dpaa2_eventdev_process_atomic(struct qbman_swp *swp,
uint8_t dqrr_index = qbman_get_dqrr_idx(dq);
RTE_SET_USED(swp);
+ RTE_SET_USED(rxq);
rte_memcpy(ev, ev_temp, sizeof(struct rte_event));
rte_free(ev_temp);
@@ -265,7 +271,7 @@ static void dpaa2_eventdev_process_atomic(struct qbman_swp *swp,
rxq = (struct dpaa2_queue *)qbman_result_DQ_fqd_ctx(dq);
if (rxq) {
- rxq->cb(swp, fd, dq, &ev[num_pkts]);
+ rxq->cb(swp, fd, dq, rxq, &ev[num_pkts]);
} else {
qbman_swp_dqrr_consume(swp, dq);
PMD_DRV_LOG(ERR, "Null Return VQ received\n");
--
1.9.1
next reply other threads:[~2017-10-10 11:36 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-10 17:51 Nipun Gupta [this message]
2017-10-10 17:51 ` [dpdk-dev] [PATCH 2/4] net/dpaa2: add API's to support event eth adapter Nipun Gupta
2017-10-10 17:51 ` [dpdk-dev] [PATCH 3/4] event/dpaa2: " Nipun Gupta
2017-10-11 3:45 ` Rao, Nikhil
2017-10-11 11:03 ` Nipun Gupta
2017-10-11 4:10 ` Rao, Nikhil
2017-10-11 11:03 ` Nipun Gupta
2017-10-10 17:51 ` [dpdk-dev] [PATCH 4/4] event/dpaa2: improve the err handling and log msg Nipun Gupta
2017-10-12 17:18 ` [dpdk-dev] [PATCH v2 1/4] drivers: add queue parameter in event processing callback Nipun Gupta
2017-10-12 17:18 ` [dpdk-dev] [PATCH v2 2/4] net/dpaa2: add API's to support event eth adapter Nipun Gupta
2017-10-13 14:55 ` Hemant Agrawal
2017-10-12 17:18 ` [dpdk-dev] [PATCH v2 3/4] event/dpaa2: " Nipun Gupta
2017-10-13 5:57 ` Rao, Nikhil
2017-10-13 14:52 ` Hemant Agrawal
2017-10-12 17:18 ` [dpdk-dev] [PATCH v2 4/4] event/dpaa2: improve the err handling and log msg Nipun Gupta
2017-10-13 14:52 ` Hemant Agrawal
2017-10-13 14:48 ` [dpdk-dev] [PATCH v2 1/4] drivers: add queue parameter in event processing callback Hemant Agrawal
2017-10-16 21:44 ` [dpdk-dev] [PATCH v3 " Nipun Gupta
2017-10-16 21:44 ` [dpdk-dev] [PATCH v3 2/4] net/dpaa2: add API's to support event eth adapter Nipun Gupta
2017-10-16 21:44 ` [dpdk-dev] [PATCH v3 3/4] event/dpaa2: " Nipun Gupta
2017-10-17 5:00 ` Jerin Jacob
2017-10-17 10:28 ` Nipun Gupta
2017-10-16 21:44 ` [dpdk-dev] [PATCH v3 4/4] event/dpaa2: improve the err handling and log msg Nipun Gupta
2017-10-17 16:38 ` [dpdk-dev] [PATCH v4 1/5] drivers: add queue parameter in event processing callback Nipun Gupta
2017-10-17 16:38 ` [dpdk-dev] [PATCH v4 2/5] net/dpaa2: add API's to support event eth adapter Nipun Gupta
2017-10-17 12:32 ` Hemant Agrawal
2017-10-17 16:38 ` [dpdk-dev] [PATCH v4 3/5] drivers: add net as dependency for event drivers Nipun Gupta
2017-10-21 10:05 ` Jerin Jacob
2017-10-17 16:38 ` [dpdk-dev] [PATCH v4 4/5] event/dpaa2: support event eth adapter Nipun Gupta
2017-10-17 16:38 ` [dpdk-dev] [PATCH v4 5/5] event/dpaa2: improve the err handling and log msg Nipun Gupta
2017-10-23 12:37 ` [dpdk-dev] [PATCH v5 1/5] drivers: add queue parameter in event processing callback Nipun Gupta
2017-10-23 12:37 ` [dpdk-dev] [PATCH v5 2/5] net/dpaa2: add API's to support event eth adapter Nipun Gupta
2017-10-23 12:37 ` [dpdk-dev] [PATCH v5 3/5] drivers: add net as dependency for event drivers Nipun Gupta
2017-10-23 6:24 ` Jerin Jacob
2017-10-23 12:37 ` [dpdk-dev] [PATCH v5 4/5] event/dpaa2: support event eth adapter Nipun Gupta
2017-10-23 12:37 ` [dpdk-dev] [PATCH v5 5/5] event/dpaa2: improve the err handling and log msg Nipun Gupta
2017-10-23 17:49 ` [dpdk-dev] [PATCH v5 1/5] drivers: add queue parameter in event processing callback Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507657887-11366-1-git-send-email-nipun.gupta@nxp.com \
--to=nipun.gupta@nxp.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=nikhil.rao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).