DPDK patches and discussions
 help / color / mirror / Atom feed
From: Matan Azrad <matan@mellanox.com>
To: Gaetan Rivet <gaetan.rivet@6wind.com>
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 2/2] net/failsafe: add timestamp to stats snapshot
Date: Sat, 21 Oct 2017 20:54:46 +0000	[thread overview]
Message-ID: <1508619286-7096-2-git-send-email-matan@mellanox.com> (raw)
In-Reply-To: <1508619286-7096-1-git-send-email-matan@mellanox.com>

Fail-safe attempts to read an ultimate statistics on removal time; if
that fails, it uses the latest recorded snapshot.

This patch adds timestamp for each stats snapshot to allow a time report
since the last snapshot in case of the above failure.

By this way, the user can estimate the stats read accuracy.

Signed-off-by: Matan Azrad <matan@mellanox.com>
---
 drivers/net/failsafe/failsafe_ether.c   | 17 ++++++++++++-----
 drivers/net/failsafe/failsafe_ops.c     | 10 ++++++++--
 drivers/net/failsafe/failsafe_private.h |  7 ++++++-
 3 files changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/net/failsafe/failsafe_ether.c b/drivers/net/failsafe/failsafe_ether.c
index 0282891..6cb435f 100644
--- a/drivers/net/failsafe/failsafe_ether.c
+++ b/drivers/net/failsafe/failsafe_ether.c
@@ -35,6 +35,7 @@
 
 #include <rte_flow.h>
 #include <rte_flow_driver.h>
+#include <rte_cycles.h>
 
 #include "failsafe_private.h"
 
@@ -317,12 +318,18 @@
 
 	/* Attempt to read current stats. */
 	err = rte_eth_stats_get(PORT_ID(sdev), &stats);
-	if (err)
-		WARN("Could not access latest statistics from sub-device %d,"
-			 " using latest snapshot.\n", SUB_ID(sdev));
+	if (err) {
+		uint64_t timestamp = sdev->stats_snapshot.timestamp;
+
+		WARN("Could not access latest statistics from sub-device %d.\n",
+			 SUB_ID(sdev));
+		if (timestamp != 0)
+			WARN("Using latest snapshot taken before %lu seconds.\n",
+				 (rte_rdtsc() - timestamp) / rte_get_tsc_hz());
+	}
 	failsafe_stats_increment(&PRIV(sdev->fs_dev)->stats_accumulator,
-			err ? &sdev->stats_snapshot : &stats);
-	memset(&sdev->stats_snapshot, 0, sizeof(struct rte_eth_stats));
+			err ? &sdev->stats_snapshot.stats : &stats);
+	memset(&sdev->stats_snapshot, 0, sizeof(sdev->stats_snapshot));
 }
 
 static inline int
diff --git a/drivers/net/failsafe/failsafe_ops.c b/drivers/net/failsafe/failsafe_ops.c
index d360965..f460551 100644
--- a/drivers/net/failsafe/failsafe_ops.c
+++ b/drivers/net/failsafe/failsafe_ops.c
@@ -38,6 +38,7 @@
 #include <rte_ethdev.h>
 #include <rte_malloc.h>
 #include <rte_flow.h>
+#include <rte_cycles.h>
 
 #include "failsafe_private.h"
 
@@ -592,13 +593,18 @@
 
 	rte_memcpy(stats, &PRIV(dev)->stats_accumulator, sizeof(*stats));
 	FOREACH_SUBDEV_STATE(sdev, i, dev, DEV_ACTIVE) {
-		ret = rte_eth_stats_get(PORT_ID(sdev), &sdev->stats_snapshot);
+		struct rte_eth_stats *snapshot = &sdev->stats_snapshot.stats;
+		uint64_t *timestamp = &sdev->stats_snapshot.timestamp;
+
+		ret = rte_eth_stats_get(PORT_ID(sdev), snapshot);
 		if (ret) {
 			ERROR("Operation rte_eth_stats_get failed for sub_device %d with error %d",
 				  i, ret);
+			*timestamp = 0;
 			return ret;
 		}
-		failsafe_stats_increment(stats, &sdev->stats_snapshot);
+		*timestamp = rte_rdtsc();
+		failsafe_stats_increment(stats, snapshot);
 	}
 	return 0;
 }
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index d343ebf..d81cc3c 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -93,6 +93,11 @@ enum dev_state {
 	DEV_STARTED,
 };
 
+struct fs_stats {
+	struct rte_eth_stats stats;
+	uint64_t timestamp;
+};
+
 struct sub_device {
 	/* Exhaustive DPDK device description */
 	struct rte_devargs devargs;
@@ -103,7 +108,7 @@ struct sub_device {
 	/* Device state machine */
 	enum dev_state state;
 	/* Last stats snapshot passed to user */
-	struct rte_eth_stats stats_snapshot;
+	struct fs_stats stats_snapshot;
 	/* Some device are defined as a command line */
 	char *cmdline;
 	/* fail-safe device backreference */
-- 
1.8.3.1

  reply	other threads:[~2017-10-21 20:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-16  7:41 [dpdk-dev] [PATCH] net/failsafe: improve stats accuracy Matan Azrad
2017-10-16  8:27 ` Gaëtan Rivet
2017-10-16  8:51   ` Matan Azrad
2017-10-19 14:31 ` [dpdk-dev] [PATCH v2] " Matan Azrad
2017-10-19 15:08   ` Gaëtan Rivet
2017-10-21 20:54   ` [dpdk-dev] [PATCH v3 1/2] " Matan Azrad
2017-10-21 20:54     ` Matan Azrad [this message]
2017-10-23  8:46       ` [dpdk-dev] [PATCH v3 2/2] net/failsafe: add timestamp to stats snapshot Gaëtan Rivet
2017-10-23  8:46     ` [dpdk-dev] [PATCH v3 1/2] net/failsafe: improve stats accuracy Gaëtan Rivet
2017-10-23 21:01       ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1508619286-7096-2-git-send-email-matan@mellanox.com \
    --to=matan@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=gaetan.rivet@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).