DPDK patches and discussions
 help / color / mirror / Atom feed
From: Matan Azrad <matan@mellanox.com>
To: Adrien Mazarguil <adrien.mazarguil@6wind.com>,
	Gaetan Rivet <gaetan.rivet@6wind.com>
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 2/3] net/mlx4: adjust removal error
Date: Thu,  2 Nov 2017 15:42:03 +0000	[thread overview]
Message-ID: <1509637324-13525-3-git-send-email-matan@mellanox.com> (raw)
In-Reply-To: <1509637324-13525-1-git-send-email-matan@mellanox.com>

Fail-safe PMD expects to get -ENODEV error value if sub PMD control
command fails because of device removal.

Make control callbacks return with -ENODEV when the device has
disappeared.

Signed-off-by: Matan Azrad <matan@mellanox.com>
---
 drivers/net/mlx4/mlx4.h        |  1 +
 drivers/net/mlx4/mlx4_ethdev.c | 38 ++++++++++++++++++++++++++++++++++----
 drivers/net/mlx4/mlx4_flow.c   |  2 ++
 drivers/net/mlx4/mlx4_intr.c   |  5 ++++-
 drivers/net/mlx4/mlx4_rxq.c    |  1 +
 drivers/net/mlx4/mlx4_txq.c    |  1 +
 6 files changed, 43 insertions(+), 5 deletions(-)

diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index e0a9853..cac9654 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -149,6 +149,7 @@ int mlx4_flow_ctrl_get(struct rte_eth_dev *dev,
 		       struct rte_eth_fc_conf *fc_conf);
 int mlx4_flow_ctrl_set(struct rte_eth_dev *dev,
 		       struct rte_eth_fc_conf *fc_conf);
+int mlx4_removed(const struct priv *priv);
 
 /* mlx4_intr.c */
 
diff --git a/drivers/net/mlx4/mlx4_ethdev.c b/drivers/net/mlx4/mlx4_ethdev.c
index b0acd12..76914b0 100644
--- a/drivers/net/mlx4/mlx4_ethdev.c
+++ b/drivers/net/mlx4/mlx4_ethdev.c
@@ -312,6 +312,8 @@
 
 	ret = mlx4_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
 	if (ret < 0) {
+		if (mlx4_removed(priv))
+			ret = -ENODEV;
 		DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
 		      name, value_str, value, strerror(rte_errno));
 		return ret;
@@ -340,15 +342,19 @@
 
 	if (sock == -1) {
 		rte_errno = errno;
-		return -rte_errno;
+		goto error;
 	}
 	ret = mlx4_get_ifname(priv, &ifr->ifr_name);
 	if (!ret && ioctl(sock, req, ifr) == -1) {
 		rte_errno = errno;
-		ret = -rte_errno;
+		close(sock);
+		goto error;
 	}
 	close(sock);
 	return ret;
+error:
+	mlx4_removed(priv);
+	return -rte_errno;
 }
 
 /**
@@ -473,13 +479,17 @@
 	if (up) {
 		err = mlx4_set_flags(priv, ~IFF_UP, IFF_UP);
 		if (err)
-			return err;
+			goto error;
 	} else {
 		err = mlx4_set_flags(priv, ~IFF_UP, ~IFF_UP);
 		if (err)
-			return err;
+			goto error;
 	}
 	return 0;
+error:
+	if (mlx4_removed(priv))
+		return -ENODEV;
+	return err;
 }
 
 /**
@@ -947,6 +957,7 @@ enum rxmode_toggle {
 
 	ifr.ifr_data = (void *)&ethpause;
 	if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) {
+		mlx4_removed(priv);
 		ret = rte_errno;
 		WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
 		     " failed: %s",
@@ -1002,6 +1013,7 @@ enum rxmode_toggle {
 	else
 		ethpause.tx_pause = 0;
 	if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) {
+		mlx4_removed(priv);
 		ret = rte_errno;
 		WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
 		     " failed: %s",
@@ -1013,3 +1025,21 @@ enum rxmode_toggle {
 	assert(ret >= 0);
 	return -ret;
 }
+/**
+ * Check if mlx4 device was removed.
+ *
+ * @param priv
+ *   Pointer to private structure.
+ *
+ * @return
+ *   -ENODEV when device is removed and rte_errno is set, otherwise 0.
+ */
+int
+mlx4_removed(const struct priv *priv)
+{
+	struct ibv_device_attr device_attr;
+
+	if (ibv_query_device(priv->ctx, &device_attr) == EIO)
+		return -(rte_errno = ENODEV);
+	return 0;
+}
diff --git a/drivers/net/mlx4/mlx4_flow.c b/drivers/net/mlx4/mlx4_flow.c
index 8b87b29..606c888 100644
--- a/drivers/net/mlx4/mlx4_flow.c
+++ b/drivers/net/mlx4/mlx4_flow.c
@@ -1069,6 +1069,8 @@ struct mlx4_drop {
 	err = errno;
 	msg = "flow rule rejected by device";
 error:
+	if (mlx4_removed(priv))
+		err = ENODEV;
 	return rte_flow_error_set
 		(error, err, RTE_FLOW_ERROR_TYPE_HANDLE, flow, msg);
 }
diff --git a/drivers/net/mlx4/mlx4_intr.c b/drivers/net/mlx4/mlx4_intr.c
index b17d109..0ebdb28 100644
--- a/drivers/net/mlx4/mlx4_intr.c
+++ b/drivers/net/mlx4/mlx4_intr.c
@@ -359,7 +359,10 @@
 			ret = EINVAL;
 	}
 	if (ret) {
-		rte_errno = ret;
+		if (mlx4_removed(dev->data->dev_private))
+			ret = ENODEV;
+		else
+			rte_errno = ret;
 		WARN("unable to disable interrupt on rx queue %d",
 		     idx);
 	} else {
diff --git a/drivers/net/mlx4/mlx4_rxq.c b/drivers/net/mlx4/mlx4_rxq.c
index 7fe21b6..43dad26 100644
--- a/drivers/net/mlx4/mlx4_rxq.c
+++ b/drivers/net/mlx4/mlx4_rxq.c
@@ -832,6 +832,7 @@ void mlx4_rss_detach(struct mlx4_rss *rss)
 	ret = rte_errno;
 	mlx4_rx_queue_release(rxq);
 	rte_errno = ret;
+	mlx4_removed(priv);
 	assert(rte_errno > 0);
 	return -rte_errno;
 }
diff --git a/drivers/net/mlx4/mlx4_txq.c b/drivers/net/mlx4/mlx4_txq.c
index a9c5bd2..09bdfd8 100644
--- a/drivers/net/mlx4/mlx4_txq.c
+++ b/drivers/net/mlx4/mlx4_txq.c
@@ -372,6 +372,7 @@ struct txq_mp2mr_mbuf_check_data {
 	ret = rte_errno;
 	mlx4_tx_queue_release(txq);
 	rte_errno = ret;
+	mlx4_removed(priv);
 	assert(rte_errno > 0);
 	return -rte_errno;
 }
-- 
1.8.3.1

  parent reply	other threads:[~2017-11-02 15:42 UTC|newest]

Thread overview: 98+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-02 15:42 [dpdk-dev] [PATCH 0/3] Fail-safe fix removal handling lack Matan Azrad
2017-11-02 15:42 ` [dpdk-dev] [PATCH 1/3] net/failsafe: " Matan Azrad
2017-11-06  8:19   ` Gaëtan Rivet
2017-11-02 15:42 ` Matan Azrad [this message]
2017-11-03 13:05   ` [dpdk-dev] [PATCH 2/3] net/mlx4: adjust removal error Adrien Mazarguil
2017-11-05  6:52     ` Matan Azrad
2017-11-06 16:51       ` Adrien Mazarguil
2017-11-02 15:42 ` [dpdk-dev] [PATCH 3/3] net/mlx5: " Matan Azrad
2017-11-03 13:06   ` Adrien Mazarguil
2017-11-05  6:57     ` Matan Azrad
2017-12-13 14:29 ` [dpdk-dev] [PATCH v2 0/4] Fail-safe fix removal handling lack Matan Azrad
2017-12-13 14:29   ` [dpdk-dev] [PATCH v2 1/4] ethdev: add devop to check removal status Matan Azrad
2017-12-13 14:29   ` [dpdk-dev] [PATCH v2 2/4] net/mlx4: support a device removal check operation Matan Azrad
2017-12-13 14:29   ` [dpdk-dev] [PATCH v2 3/4] net/mlx5: " Matan Azrad
2017-12-13 14:29   ` [dpdk-dev] [PATCH v2 4/4] net/failsafe: fix removed device handling Matan Azrad
2017-12-13 15:16     ` Gaëtan Rivet
2017-12-13 15:48       ` Matan Azrad
2017-12-13 16:09         ` Gaëtan Rivet
2017-12-13 17:09           ` Thomas Monjalon
2017-12-14 10:40             ` Matan Azrad
2017-12-13 21:55           ` Gaëtan Rivet
2017-12-14 10:40             ` Matan Azrad
2017-12-14 10:48               ` Gaëtan Rivet
2017-12-14 13:07                 ` Matan Azrad
2017-12-14 13:27                   ` Gaëtan Rivet
2017-12-14 14:43                     ` Matan Azrad
2017-12-19 17:10   ` [dpdk-dev] [PATCH v3 0/6] Fail-safe\ethdev: fix removal handling lack Matan Azrad
2017-12-19 17:10     ` [dpdk-dev] [PATCH v3 1/6] ethdev: add devop to check removal status Matan Azrad
2017-12-19 17:20       ` Stephen Hemminger
2017-12-19 17:24         ` Matan Azrad
2017-12-19 20:51           ` Thomas Monjalon
2017-12-19 22:13             ` Gaëtan Rivet
2017-12-20  8:39               ` Matan Azrad
2018-01-07  9:53       ` Thomas Monjalon
2017-12-19 17:10     ` [dpdk-dev] [PATCH v3 2/6] net/mlx4: support a device removal check operation Matan Azrad
2017-12-19 17:10     ` [dpdk-dev] [PATCH v3 3/6] net/mlx5: " Matan Azrad
2017-12-19 17:10     ` [dpdk-dev] [PATCH v3 4/6] ethdev: adjust APIs removal error report Matan Azrad
2018-01-07  9:56       ` Thomas Monjalon
2017-12-19 17:10     ` [dpdk-dev] [PATCH v3 5/6] ethdev: adjust flow " Matan Azrad
2018-01-07  9:58       ` Thomas Monjalon
2017-12-19 17:10     ` [dpdk-dev] [PATCH v3 6/6] net/failsafe: fix removed device handling Matan Azrad
2017-12-19 22:21       ` Gaëtan Rivet
2017-12-20 10:58         ` Matan Azrad
2018-01-08 10:57           ` Gaëtan Rivet
2018-01-08 12:55             ` Matan Azrad
2018-01-08 13:46               ` Gaëtan Rivet
2018-01-08 14:00                 ` Matan Azrad
2018-01-08 14:31                   ` Gaëtan Rivet
2018-01-10 12:30     ` [dpdk-dev] [PATCH v4 0/6] Fail-safe\ethdev: fix removal handling lack Matan Azrad
2018-01-10 12:31       ` [dpdk-dev] [PATCH v4 1/6] ethdev: add devop to check removal status Matan Azrad
2018-01-10 12:31       ` [dpdk-dev] [PATCH v4 2/6] net/mlx4: support a device removal check operation Matan Azrad
2018-01-10 12:31       ` [dpdk-dev] [PATCH v4 3/6] net/mlx5: " Matan Azrad
2018-01-10 12:31       ` [dpdk-dev] [PATCH v4 4/6] ethdev: adjust APIs removal error report Matan Azrad
2018-01-10 12:31       ` [dpdk-dev] [PATCH v4 5/6] ethdev: adjust flow " Matan Azrad
2018-01-10 12:31       ` [dpdk-dev] [PATCH v4 6/6] net/failsafe: fix removed device handling Matan Azrad
2018-01-10 12:43         ` Matan Azrad
2018-01-10 13:51           ` Gaëtan Rivet
2018-01-10 13:47         ` Gaëtan Rivet
2018-01-17 20:19       ` [dpdk-dev] [PATCH v5 0/6] Fail-safe\ethdev: fix removal handling lack Matan Azrad
2018-01-17 20:19         ` [dpdk-dev] [PATCH v5 1/6] ethdev: add devop to check removal status Matan Azrad
2018-01-17 20:40           ` Ferruh Yigit
2018-01-17 20:19         ` [dpdk-dev] [PATCH v5 2/6] net/mlx4: support a device removal check operation Matan Azrad
2018-01-17 20:19         ` [dpdk-dev] [PATCH v5 3/6] net/mlx5: " Matan Azrad
2018-01-17 20:19         ` [dpdk-dev] [PATCH v5 4/6] ethdev: adjust APIs removal error report Matan Azrad
2018-01-17 20:19         ` [dpdk-dev] [PATCH v5 5/6] ethdev: adjust flow " Matan Azrad
2018-01-17 20:19         ` [dpdk-dev] [PATCH v5 6/6] net/failsafe: fix removed device handling Matan Azrad
2018-01-18  8:44           ` Gaëtan Rivet
2018-01-18 11:27         ` [dpdk-dev] [PATCH v6 0/6] Fail-safe\ethdev: fix removal handling lack Matan Azrad
2018-01-18 11:27           ` [dpdk-dev] [PATCH v6 1/6] ethdev: add devop to check removal status Matan Azrad
2018-01-18 17:18             ` Ferruh Yigit
2018-01-18 17:57               ` Adrien Mazarguil
2018-01-18 18:02               ` Matan Azrad
2018-01-18 11:27           ` [dpdk-dev] [PATCH v6 2/6] net/mlx4: support a device removal check operation Matan Azrad
2018-01-18 16:59             ` Adrien Mazarguil
2018-01-18 11:27           ` [dpdk-dev] [PATCH v6 3/6] net/mlx5: " Matan Azrad
2018-01-18 16:59             ` Adrien Mazarguil
2018-01-18 11:27           ` [dpdk-dev] [PATCH v6 4/6] ethdev: adjust APIs removal error report Matan Azrad
2018-01-18 17:31             ` Ferruh Yigit
2018-01-18 18:10               ` Matan Azrad
2018-01-19 16:19                 ` Ferruh Yigit
2018-01-19 17:35                   ` Ananyev, Konstantin
2018-01-19 17:54                   ` Thomas Monjalon
2018-01-19 18:13                     ` Ferruh Yigit
2018-01-19 18:16                       ` Thomas Monjalon
2018-01-20 19:04                         ` Matan Azrad
2018-01-20 20:28                           ` Thomas Monjalon
2018-01-20 20:45                             ` Matan Azrad
2018-01-21 20:07                   ` Ferruh Yigit
2018-01-18 11:27           ` [dpdk-dev] [PATCH v6 5/6] ethdev: adjust flow " Matan Azrad
2018-01-18 11:27           ` [dpdk-dev] [PATCH v6 6/6] net/failsafe: fix removed device handling Matan Azrad
2018-01-20 21:12           ` [dpdk-dev] [PATCH v7 0/6] Fail-safe\ethdev: fix removal handling lack Matan Azrad
2018-01-20 21:12             ` [dpdk-dev] [PATCH v7 1/6] ethdev: add devop to check removal status Matan Azrad
2018-01-20 21:12             ` [dpdk-dev] [PATCH v7 2/6] net/mlx4: support a device removal check operation Matan Azrad
2018-01-20 21:12             ` [dpdk-dev] [PATCH v7 3/6] net/mlx5: " Matan Azrad
2018-01-20 21:12             ` [dpdk-dev] [PATCH v7 4/6] ethdev: adjust APIs removal error report Matan Azrad
2018-01-20 21:12             ` [dpdk-dev] [PATCH v7 5/6] ethdev: adjust flow " Matan Azrad
2018-01-20 21:12             ` [dpdk-dev] [PATCH v7 6/6] net/failsafe: fix removed device handling Matan Azrad
2018-01-21 20:28             ` [dpdk-dev] [PATCH v7 0/6] Fail-safe\ethdev: fix removal handling lack Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1509637324-13525-3-git-send-email-matan@mellanox.com \
    --to=matan@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=gaetan.rivet@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).