From: Matan Azrad <matan@mellanox.com>
To: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Cc: dev@dpdk.org, Ophir Munk <ophirmu@mellanox.com>
Subject: [dpdk-dev] [PATCH v5 1/8] net/mlx4: remove error flows from Tx fast path
Date: Thu, 2 Nov 2017 16:42:44 +0000 [thread overview]
Message-ID: <1509640971-8637-2-git-send-email-matan@mellanox.com> (raw)
In-Reply-To: <1509640971-8637-1-git-send-email-matan@mellanox.com>
Move unnecessary error flows to DEBUG mode.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
drivers/net/mlx4/mlx4_rxtx.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/mlx4/mlx4_rxtx.c b/drivers/net/mlx4/mlx4_rxtx.c
index 67dc712..79c7fa2 100644
--- a/drivers/net/mlx4/mlx4_rxtx.c
+++ b/drivers/net/mlx4/mlx4_rxtx.c
@@ -169,6 +169,7 @@ struct pv {
* Make sure we read the CQE after we read the ownership bit.
*/
rte_rmb();
+#ifndef NDEBUG
if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) ==
MLX4_CQE_OPCODE_ERROR)) {
struct mlx4_err_cqe *cqe_err =
@@ -178,6 +179,7 @@ struct pv {
(void *)txq, cqe_err->vendor_err,
cqe_err->syndrome);
}
+#endif /* NDEBUG */
/* Get WQE index reported in the CQE. */
new_index =
rte_be_to_cpu_16(cqe->wqe_index) & sq->txbb_cnt_mask;
@@ -302,7 +304,7 @@ struct pv {
* Packet to transmit.
*
* @return
- * 0 on success, negative errno value otherwise and rte_errno is set.
+ * 0 on success, negative errno value otherwise.
*/
static inline int
mlx4_post_send(struct txq *txq, struct rte_mbuf *pkt)
@@ -322,7 +324,6 @@ struct pv {
uint32_t byte_count;
int wqe_real_size;
int nr_txbbs;
- int rc;
struct pv *pv = (struct pv *)txq->bounce_buf;
int pv_counter = 0;
@@ -337,8 +338,7 @@ struct pv {
if (((sq->head - sq->tail) + nr_txbbs +
sq->headroom_txbbs) >= sq->txbb_cnt ||
nr_txbbs > MLX4_MAX_WQE_TXBBS) {
- rc = ENOSPC;
- goto err;
+ return -ENOSPC;
}
/* Get the control and data entries of the WQE. */
ctrl = (struct mlx4_wqe_ctrl_seg *)mlx4_get_send_wqe(sq, head_idx);
@@ -354,6 +354,7 @@ struct pv {
dseg->addr = rte_cpu_to_be_64(addr);
/* Memory region key for this memory pool. */
lkey = mlx4_txq_mp2mr(txq, mlx4_txq_mb2mp(buf));
+#ifndef NDEBUG
if (unlikely(lkey == (uint32_t)-1)) {
/* MR does not exist. */
DEBUG("%p: unable to get MP <-> MR association",
@@ -366,9 +367,9 @@ struct pv {
ctrl->fence_size = (wqe_real_size >> 4) & 0x3f;
mlx4_txq_stamp_freed_wqe(sq, head_idx,
(sq->head & sq->txbb_cnt) ? 0 : 1);
- rc = EFAULT;
- goto err;
+ return -EFAULT;
}
+#endif /* NDEBUG */
dseg->lkey = rte_cpu_to_be_32(lkey);
if (likely(buf->data_len)) {
byte_count = rte_cpu_to_be_32(buf->data_len);
@@ -471,9 +472,6 @@ struct pv {
MLX4_BIT_WQE_OWN : 0));
sq->head += nr_txbbs;
return 0;
-err:
- rte_errno = rc;
- return -rc;
}
/**
--
1.8.3.1
next prev parent reply other threads:[~2017-11-02 16:43 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1508752838-30408-1-git-send-email-ophirmu@mellanox.com>
2017-10-23 14:21 ` [dpdk-dev] [PATCH v2 0/7] net/mlx4: follow-up on new TX datapath introduced in RC1 Ophir Munk
2017-10-23 14:21 ` [dpdk-dev] [PATCH v2 1/7] net/mlx4: remove error flows from Tx fast path Ophir Munk
2017-10-25 16:49 ` Adrien Mazarguil
2017-10-23 14:21 ` [dpdk-dev] [PATCH v2 2/7] net/mlx4: inline more Tx functions Ophir Munk
2017-10-25 16:49 ` Adrien Mazarguil
2017-10-25 21:42 ` Ophir Munk
2017-10-26 7:48 ` Adrien Mazarguil
2017-10-26 14:27 ` Ophir Munk
2017-10-29 19:30 ` Ophir Munk
2017-10-23 14:21 ` [dpdk-dev] [PATCH v2 3/7] net/mlx4: save lkey in big-endian format Ophir Munk
2017-10-23 15:24 ` Nélio Laranjeiro
2017-10-23 14:21 ` [dpdk-dev] [PATCH v2 4/7] net/mlx4: merge Tx path functions Ophir Munk
2017-10-24 13:51 ` Nélio Laranjeiro
2017-10-24 20:36 ` Ophir Munk
2017-10-25 7:50 ` Nélio Laranjeiro
2017-10-26 10:31 ` Matan Azrad
2017-10-26 12:12 ` Nélio Laranjeiro
2017-10-26 12:30 ` Matan Azrad
2017-10-26 13:44 ` Nélio Laranjeiro
2017-10-26 16:21 ` Matan Azrad
2017-10-23 14:21 ` [dpdk-dev] [PATCH v2 5/7] net/mlx4: remove unnecessary variables in Tx burst Ophir Munk
2017-10-25 16:49 ` Adrien Mazarguil
2017-10-23 14:21 ` [dpdk-dev] [PATCH v2 6/7] net/mlx4: improve performance of one Tx segment Ophir Munk
2017-10-25 16:50 ` Adrien Mazarguil
2017-10-23 14:22 ` [dpdk-dev] [PATCH v2 7/7] net/mlx4: separate Tx for multi-segments Ophir Munk
2017-10-25 16:50 ` Adrien Mazarguil
2017-10-30 8:15 ` Ophir Munk
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 0/7] Tx path improvements Matan Azrad
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 1/7] net/mlx4: remove error flows from Tx fast path Matan Azrad
2017-10-30 14:23 ` Adrien Mazarguil
2017-10-30 18:11 ` Matan Azrad
2017-10-31 10:16 ` Adrien Mazarguil
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 2/7] net/mlx4: associate MR to MP in a short function Matan Azrad
2017-10-30 14:23 ` Adrien Mazarguil
2017-10-31 13:25 ` Ophir Munk
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 3/7] net/mlx4: merge Tx path functions Matan Azrad
2017-10-30 14:23 ` Adrien Mazarguil
2017-10-30 18:12 ` Matan Azrad
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 4/7] net/mlx4: remove completion counter in Tx burst Matan Azrad
2017-10-30 14:23 ` Adrien Mazarguil
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 5/7] net/mlx4: separate Tx segment cases Matan Azrad
2017-10-30 14:23 ` Adrien Mazarguil
2017-10-30 18:23 ` Matan Azrad
2017-10-31 10:17 ` Adrien Mazarguil
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 6/7] net/mlx4: mitigate Tx path memory barriers Matan Azrad
2017-10-30 14:23 ` Adrien Mazarguil
2017-10-30 19:47 ` Matan Azrad
2017-10-31 10:17 ` Adrien Mazarguil
2017-10-31 11:35 ` Matan Azrad
2017-10-31 13:21 ` Adrien Mazarguil
2017-10-30 10:07 ` [dpdk-dev] [PATCH v3 7/7] net/mlx4: remove empty Tx segment support Matan Azrad
2017-10-30 14:24 ` Adrien Mazarguil
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 0/8] net/mlx4: Tx path improvements Matan Azrad
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 1/8] net/mlx4: remove error flows from Tx fast path Matan Azrad
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 2/8] net/mlx4: associate MR to MP in a short function Matan Azrad
2017-11-02 13:42 ` Adrien Mazarguil
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 3/8] net/mlx4: fix ring wraparound compiler hint Matan Azrad
2017-11-02 13:42 ` Adrien Mazarguil
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 4/8] net/mlx4: merge Tx path functions Matan Azrad
2017-11-02 13:42 ` Adrien Mazarguil
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 5/8] net/mlx4: remove duplicate handling in Tx burst Matan Azrad
2017-11-02 13:42 ` Adrien Mazarguil
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 6/8] net/mlx4: separate Tx segment cases Matan Azrad
2017-11-02 13:43 ` Adrien Mazarguil
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 7/8] net/mlx4: fix HW memory optimizations careless Matan Azrad
2017-11-02 13:43 ` Adrien Mazarguil
2017-10-31 18:21 ` [dpdk-dev] [PATCH v4 8/8] net/mlx4: mitigate Tx path memory barriers Matan Azrad
2017-11-02 13:43 ` Adrien Mazarguil
2017-11-02 13:41 ` [dpdk-dev] [PATCH] net/mlx4: fix missing include Adrien Mazarguil
2017-11-02 20:35 ` Ferruh Yigit
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 0/8] net/mlx4: Tx path improvements Matan Azrad
2017-11-02 16:42 ` Matan Azrad [this message]
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 2/8] net/mlx4: associate MR to MP in a short function Matan Azrad
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 3/8] net/mlx4: fix ring wraparound compiler hint Matan Azrad
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 4/8] net/mlx4: merge Tx path functions Matan Azrad
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 5/8] net/mlx4: remove duplicate handling in Tx burst Matan Azrad
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 6/8] net/mlx4: separate Tx segment cases Matan Azrad
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 7/8] net/mlx4: fix HW memory optimizations careless Matan Azrad
2017-11-02 16:42 ` [dpdk-dev] [PATCH v5 8/8] net/mlx4: mitigate Tx path memory barriers Matan Azrad
2017-11-02 17:07 ` [dpdk-dev] [PATCH v5 0/8] net/mlx4: Tx path improvements Adrien Mazarguil
2017-11-02 20:35 ` Ferruh Yigit
2017-11-02 20:41 ` Ferruh Yigit
2017-11-03 9:48 ` Adrien Mazarguil
2017-11-03 19:25 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1509640971-8637-2-git-send-email-matan@mellanox.com \
--to=matan@mellanox.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=ophirmu@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).