[dpdk-dev] [PATCH v2 1/2] net/ixgbe: add and export MDIO APIs

[Shweta Choudaha <shweta.choudaha@gmail.com>]

From: Shweta Choudaha <shweta.choudaha@att.com>

Add ixgbe MDIO access APIs to read and write PHY registers when
being used as a backplane port. Export these APIs via the map file

Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
Reviewed-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
---
 drivers/net/ixgbe/rte_pmd_ixgbe.c           | 53 +++++++++++++++++++++++++++++
 drivers/net/ixgbe/rte_pmd_ixgbe.h           | 39 +++++++++++++++++++++
 drivers/net/ixgbe/rte_pmd_ixgbe_version.map |  7 ++++
 3 files changed, 99 insertions(+)

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c b/drivers/net/ixgbe/rte_pmd_ixgbe.c
index f127378..34d8cb4 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
@@ -1041,3 +1041,56 @@ rte_pmd_ixgbe_bypass_wd_reset(uint16_t port_id)
 	return ixgbe_bypass_wd_reset(dev);
 }
 #endif
+
+static void rte_pmd_ixgbe_get_hw_phy(uint16_t port, struct ixgbe_hw **hw,
+				     struct ixgbe_phy_info **phy)
+{
+	struct rte_eth_dev *dev;
+
+	*hw = NULL;
+	*phy = NULL;
+
+	dev = &rte_eth_devices[port];
+	if (!is_ixgbe_supported(dev))
+		return;
+
+	*hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (!*hw)
+		return;
+
+	*phy = &(*hw)->phy;
+}
+
+int
+rte_pmd_ixgbe_mdio_read(uint16_t port, uint32_t reg_addr,
+			uint32_t dev_type, uint16_t *phy_data)
+{
+	struct ixgbe_hw *hw;
+	struct ixgbe_phy_info *phy;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+	rte_pmd_ixgbe_get_hw_phy(port, &hw, &phy);
+
+	if (!hw || !phy)
+		return -ENOTSUP;
+
+	return phy->ops.read_reg_mdi(hw, reg_addr, dev_type, phy_data);
+}
+
+int
+rte_pmd_ixgbe_mdio_write(uint16_t port, uint32_t reg_addr,
+			 uint32_t dev_type, uint16_t phy_data)
+{
+	struct ixgbe_hw *hw;
+	struct ixgbe_phy_info *phy;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+	rte_pmd_ixgbe_get_hw_phy(port, &hw, &phy);
+
+	if (!hw || !phy)
+		return -ENOTSUP;
+
+	return phy->ops.write_reg_mdi(hw, reg_addr, dev_type, phy_data);
+}
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 81b18f8..5d36f8a 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -601,6 +601,45 @@ int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
  */
 int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
 
+/**
+ * Read PHY register using MDIO
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Always Unused
+ * @param phy_data
+ *   Pointer for reading PHY register data
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ */
+int
+rte_pmd_ixgbe_mdio_read(uint16_t port, uint32_t reg_addr,
+			uint32_t dev_type, uint16_t *phy_data);
+
+/**
+ * Write data to PHY register using MDIO
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Always unused
+ * @param phy_data
+ *   Data to write to PHY register
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ */
+int
+rte_pmd_ixgbe_mdio_write(uint16_t port, uint32_t reg_addr,
+			 uint32_t dev_type, uint16_t phy_data);
 
 /**
  * Response sent back to ixgbe driver from user app after callback
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
index bf77674..ce72c73 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
@@ -52,3 +52,10 @@ DPDK_17.08 {
 	rte_pmd_ixgbe_bypass_wd_timeout_show;
 	rte_pmd_ixgbe_bypass_wd_timeout_store;
 } DPDK_17.05;
+
+EXPERIMENTAL {
+	global:
+
+	rte_pmd_ixgbe_mdio_read;
+	rte_pmd_ixgbe_mdio_write;
+} DPDK_17.08;
-- 
2.1.4